Merge tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree merge from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.8-rc1

  There's a lot of patches in here, the majority being the comedi
  rework/cleanup that has been ongoing and is causing a huge reduction
  in overall code size, which is amazing to watch.  We also removed some
  older drivers (telephony and rts_pstor), and added a new one (fwserial
  which also came in through the tty tree due to tty api changes, take
  that one if you get merge conflicts.)

  The iio and ipack drivers are moving out of the staging area into
  their own part of the kernel as they have been cleaned up sufficiently
  and are working well.

  Overall, again a reduction of code:
   768 files changed, 31887 insertions(+), 82166 deletions(-)

  All of this has been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1298 commits)
  iio: imu: adis16480: remove duplicated include from adis16480.c
  iio: gyro: adis16136: remove duplicated include from adis16136.c
  iio:imu: adis16480: show_firmware() buffer too small
  iio:gyro: adis16136: divide by zero in write_frequency()
  iio: adc: Add Texas Instruments ADC081C021/027 support
  iio:ad7793: Add support for the ad7796 and ad7797
  iio:ad7793: Add support for the ad7798 and ad7799
  staging:iio: Move ad7793 driver out of staging
  staging:iio:ad7793: Implement stricter id checking
  staging:iio:ad7793: Move register definitions from header to source
  staging:iio:ad7793: Rework regulator handling
  staging:iio:ad7793: Rework platform data
  staging:iio:ad7793: Use kstrtol instead of strict_strtol
  staging:iio:ad7793: Use usleep_range instead of msleep
  staging:iio:ad7793: Fix temperature scale
  staging:iio:ad7793: Fix VDD monitor scale
  staging: gdm72xx: unlock on error in init_usb()
  staging: panel: pass correct lengths to keypad_send_key()
  staging: comedi: addi_apci_2032: fix interrupt support
  staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()
  ...

1 files changed, 31 insertions, 31 deletions

diff --git a/drivers/staging/winbond/wb35rx_s.h b/drivers/staging/winbond/wb35rx_s.h
index 4b03274..545bc95 100644
--- a/drivers/staging/winbond/wb35rx_s.h
+++ b/drivers/staging/winbond/wb35rx_s.h
@@ -1,44 +1,44 @@
-//============================================================================
-// wb35rx.h --
-//============================================================================
+#ifndef __WINBOND_35RX_S_H
+#define __WINBOND_35RX_S_H
 
-// Definition for this module used
-#define MAX_USB_RX_BUFFER	4096	// This parameter must be 4096 931130.4.f
+/* Definition for this module used */
+#define MAX_USB_RX_BUFFER		4096	/* This parameter must be 4096 931130.4.f */
+#define MAX_USB_RX_BUFFER_NUMBER	ETHERNET_RX_DESCRIPTORS	/* Maximum 254, 255 is RESERVED ID */
+#define RX_INTERFACE			0	/* Interface 1 */
+#define RX_PIPE				2	/* Pipe 3 */
+#define MAX_PACKET_SIZE			1600	/* 1568	= 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g */
+#define RX_END_TAG			0x0badbeef
 
-#define MAX_USB_RX_BUFFER_NUMBER	ETHERNET_RX_DESCRIPTORS		// Maximum 254, 255 is RESERVED ID
-#define RX_INTERFACE				0	// Interface 1
-#define RX_PIPE						2	// Pipe 3
-#define MAX_PACKET_SIZE				1600 //1568	// 8 + 1532 + 4 + 24(IV EIV MIC ICV CRC) for check DMA data 931130.4.g
-#define RX_END_TAG					0x0badbeef
 
-
-//====================================
-// Internal variable for module
-//====================================
+/*
+ * Internal variable for module
+ */
 struct wb35_rx {
-	u32			ByteReceived;// For calculating throughput of BulkIn
-	atomic_t		RxFireCounter;// Does Wb35Rx module fire?
+	u32		ByteReceived; /* For calculating throughput of BulkIn */
+	atomic_t	RxFireCounter;/* Does Wb35Rx module fire? */
 
-	u8	RxBuffer[ MAX_USB_RX_BUFFER_NUMBER ][ ((MAX_USB_RX_BUFFER+3) & ~0x03 ) ];
-	u16	RxBufferSize[ ((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01) ];
-	u8	RxOwner[ ((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03 ) ];//Ownership of buffer  0: SW 1:HW
+	u8		RxBuffer[MAX_USB_RX_BUFFER_NUMBER][((MAX_USB_RX_BUFFER+3) & ~0x03)];
+	u16		RxBufferSize[((MAX_USB_RX_BUFFER_NUMBER+1) & ~0x01)];
+	u8		RxOwner[((MAX_USB_RX_BUFFER_NUMBER+3) & ~0x03)]; /* Ownership of buffer  0:SW 1:HW */
 
-	u32	RxProcessIndex;//The next index to process
-	u32	RxBufferId;
-	u32	EP3vm_state;
+	u32		RxProcessIndex; /* The next index to process */
+	u32		RxBufferId;
+	u32		EP3vm_state;
 
-	u32	rx_halt; // For VM stopping
+	u32		rx_halt; /* For VM stopping */
 
-	u16	MoreDataSize;
-	u16	PacketSize;
+	u16		MoreDataSize;
+	u16		PacketSize;
 
-	u32	CurrentRxBufferId; // For complete routine usage
-	u32	Rx3UrbCancel;
+	u32		CurrentRxBufferId; /* For complete routine usage */
+	u32		Rx3UrbCancel;
 
-	u32	LastR1; // For RSSI reporting
-	struct urb *				RxUrb;
-	u32		Ep3ErrorCount2; // 20060625.1 Usbd for Rx DMA error count
+	u32		LastR1; /* For RSSI reporting */
+	struct urb	*RxUrb;
+	u32		Ep3ErrorCount2; /* 20060625.1 Usbd for Rx DMA error count */
 
 	int		EP3VM_status;
-	u8 *	pDRx;
+	u8		*pDRx;
 };
+
+#endif /* __WINBOND_35RX_S_H */