diff options
author | Mark Einon <mark.einon@gmail.com> | 2011-10-20 00:18:41 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-10-23 08:07:11 (GMT) |
commit | 6abafc164c13d4fa9e009d401ad7537991295add (patch) | |
tree | 98b1e15ead4bc44d913efa6730f25fb70a6787e5 /drivers/staging | |
parent | 920d74a405a91248c65490b668c556d4d8f8028a (diff) | |
download | linux-fsl-qoriq-6abafc164c13d4fa9e009d401ad7537991295add.tar.xz |
staging: et131x: Make rx_ring.fbr{0,1} share a common structure
Sharing a common structure by moving common structure items into
fbr_lookup.
TODO - Currently will not work if USE_FBR0 = 0 as FBR1 uses fbr[1]
which is removed in this case
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/et131x/et131x.c | 293 |
1 files changed, 140 insertions, 153 deletions
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 14f54e4..0bc3e04 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -185,13 +185,7 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver " #define PARM_DMA_CACHE_DEF 0 /* RX defines */ -#define USE_FBR0 true - -#ifdef USE_FBR0 -/* #define FBR0_BUFFER_SIZE 256 */ -#endif - -/* #define FBR1_BUFFER_SIZE 2048 */ +#define USE_FBR0 1 #define FBR_CHUNKS 32 @@ -200,14 +194,16 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver " /* number of RFDs - default and min */ #ifdef USE_FBR0 #define RFD_LOW_WATER_MARK 40 -#define NIC_MIN_NUM_RFD 64 #define NIC_DEFAULT_NUM_RFD 1024 +#define NUM_FBRS 2 #else #define RFD_LOW_WATER_MARK 20 -#define NIC_MIN_NUM_RFD 64 #define NIC_DEFAULT_NUM_RFD 256 +#define NUM_FBRS 1 #endif +#define NIC_MIN_NUM_RFD 64 + #define NUM_PACKETS_HANDLED 256 #define ALCATEL_BAD_STATUS 0xe47f0000 @@ -303,14 +299,24 @@ struct rx_status_block { }; /* - * Structure for look-up table holding free buffer ring pointers + * Structure for look-up table holding free buffer ring pointers, addresses + * and state. */ struct fbr_lookup { - void *virt[MAX_DESC_PER_RING_RX]; - void *buffer1[MAX_DESC_PER_RING_RX]; - void *buffer2[MAX_DESC_PER_RING_RX]; - u32 bus_high[MAX_DESC_PER_RING_RX]; - u32 bus_low[MAX_DESC_PER_RING_RX]; + void *virt[MAX_DESC_PER_RING_RX]; + void *buffer1[MAX_DESC_PER_RING_RX]; + void *buffer2[MAX_DESC_PER_RING_RX]; + u32 bus_high[MAX_DESC_PER_RING_RX]; + u32 bus_low[MAX_DESC_PER_RING_RX]; + void *ring_virtaddr; + dma_addr_t ring_physaddr; + void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + uint64_t real_physaddr; + uint64_t offset; + u32 local_full; + u32 num_entries; + u32 buffsize; }; /* @@ -318,27 +324,7 @@ struct fbr_lookup { * reference(s) to the rings */ struct rx_ring { -#ifdef USE_FBR0 - void *fbr0_ring_virtaddr; - dma_addr_t fbr0_ring_physaddr; - void *fbr0_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t fbr0_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - uint64_t fbr0_real_physaddr; - uint64_t fbr0_offset; - u32 local_fbr0_full; - u32 fbr0_num_entries; - u32 fbr0_buffsize; -#endif - void *fbr1_ring_virtaddr; - dma_addr_t fbr1_ring_physaddr; - void *fbr1_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t fbr1_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - uint64_t fbr1_real_physaddr; - uint64_t fbr1_offset; - struct fbr_lookup *fbr[2]; /* One per ring */ - u32 local_fbr1_full; - u32 fbr1_num_entries; - u32 fbr1_buffsize; + struct fbr_lookup *fbr[NUM_FBRS]; void *ps_ring_virtaddr; dma_addr_t ps_ring_physaddr; @@ -1945,40 +1931,40 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) if (adapter->registry_jumbo_packet < 2048) { #ifdef USE_FBR0 - rx_ring->fbr0_buffsize = 256; - rx_ring->fbr0_num_entries = 512; + rx_ring->fbr[0]->buffsize = 256; + rx_ring->fbr[0]->num_entries = 512; #endif - rx_ring->fbr1_buffsize = 2048; - rx_ring->fbr1_num_entries = 512; + rx_ring->fbr[1]->buffsize = 2048; + rx_ring->fbr[1]->num_entries = 512; } else if (adapter->registry_jumbo_packet < 4096) { #ifdef USE_FBR0 - rx_ring->fbr0_buffsize = 512; - rx_ring->fbr0_num_entries = 1024; + rx_ring->fbr[0]->buffsize = 512; + rx_ring->fbr[0]->num_entries = 1024; #endif - rx_ring->fbr1_buffsize = 4096; - rx_ring->fbr1_num_entries = 512; + rx_ring->fbr[1]->buffsize = 4096; + rx_ring->fbr[1]->num_entries = 512; } else { #ifdef USE_FBR0 - rx_ring->fbr0_buffsize = 1024; - rx_ring->fbr0_num_entries = 768; + rx_ring->fbr[0]->buffsize = 1024; + rx_ring->fbr[0]->num_entries = 768; #endif - rx_ring->fbr1_buffsize = 16384; - rx_ring->fbr1_num_entries = 128; + rx_ring->fbr[1]->buffsize = 16384; + rx_ring->fbr[1]->num_entries = 128; } #ifdef USE_FBR0 - adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr0_num_entries + - adapter->rx_ring.fbr1_num_entries; + adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[0]->num_entries + + adapter->rx_ring.fbr[1]->num_entries; #else - adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr1_num_entries; + adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[1]->num_entries; #endif /* Allocate an area of memory for Free Buffer Ring 1 */ - bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr1_num_entries) + 0xfff; - rx_ring->fbr1_ring_virtaddr = pci_alloc_consistent(adapter->pdev, + bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) + 0xfff; + rx_ring->fbr[1]->ring_virtaddr = pci_alloc_consistent(adapter->pdev, bufsize, - &rx_ring->fbr1_ring_physaddr); - if (!rx_ring->fbr1_ring_virtaddr) { + &rx_ring->fbr[1]->ring_physaddr); + if (!rx_ring->fbr[1]->ring_virtaddr) { dev_err(&adapter->pdev->dev, "Cannot alloc memory for Free Buffer Ring 1\n"); return -ENOMEM; @@ -1991,24 +1977,24 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) * are ever returned, make sure the high part is retrieved here * before storing the adjusted address. */ - rx_ring->fbr1_real_physaddr = rx_ring->fbr1_ring_physaddr; + rx_ring->fbr[1]->real_physaddr = rx_ring->fbr[1]->ring_physaddr; /* Align Free Buffer Ring 1 on a 4K boundary */ et131x_align_allocated_memory(adapter, - &rx_ring->fbr1_real_physaddr, - &rx_ring->fbr1_offset, 0x0FFF); + &rx_ring->fbr[1]->real_physaddr, + &rx_ring->fbr[1]->offset, 0x0FFF); - rx_ring->fbr1_ring_virtaddr = - (void *)((u8 *) rx_ring->fbr1_ring_virtaddr + - rx_ring->fbr1_offset); + rx_ring->fbr[1]->ring_virtaddr = + (void *)((u8 *) rx_ring->fbr[1]->ring_virtaddr + + rx_ring->fbr[1]->offset); #ifdef USE_FBR0 /* Allocate an area of memory for Free Buffer Ring 0 */ - bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr0_num_entries) + 0xfff; - rx_ring->fbr0_ring_virtaddr = pci_alloc_consistent(adapter->pdev, + bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) + 0xfff; + rx_ring->fbr[0]->ring_virtaddr = pci_alloc_consistent(adapter->pdev, bufsize, - &rx_ring->fbr0_ring_physaddr); - if (!rx_ring->fbr0_ring_virtaddr) { + &rx_ring->fbr[0]->ring_physaddr); + if (!rx_ring->fbr[0]->ring_virtaddr) { dev_err(&adapter->pdev->dev, "Cannot alloc memory for Free Buffer Ring 0\n"); return -ENOMEM; @@ -2021,18 +2007,18 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) * are ever returned, make sure the high part is retrieved here before * storing the adjusted address. */ - rx_ring->fbr0_real_physaddr = rx_ring->fbr0_ring_physaddr; + rx_ring->fbr[0]->real_physaddr = rx_ring->fbr[0]->ring_physaddr; /* Align Free Buffer Ring 0 on a 4K boundary */ et131x_align_allocated_memory(adapter, - &rx_ring->fbr0_real_physaddr, - &rx_ring->fbr0_offset, 0x0FFF); + &rx_ring->fbr[0]->real_physaddr, + &rx_ring->fbr[0]->offset, 0x0FFF); - rx_ring->fbr0_ring_virtaddr = - (void *)((u8 *) rx_ring->fbr0_ring_virtaddr + - rx_ring->fbr0_offset); + rx_ring->fbr[0]->ring_virtaddr = + (void *)((u8 *) rx_ring->fbr[0]->ring_virtaddr + + rx_ring->fbr[0]->offset); #endif - for (i = 0; i < (rx_ring->fbr1_num_entries / FBR_CHUNKS); i++) { + for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) { u64 fbr1_offset; u64 fbr1_tmp_physaddr; u32 fbr1_align; @@ -2044,25 +2030,25 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) * the size of FBR0. By allocating N buffers at once, we * reduce this overhead. */ - if (rx_ring->fbr1_buffsize > 4096) + if (rx_ring->fbr[1]->buffsize > 4096) fbr1_align = 4096; else - fbr1_align = rx_ring->fbr1_buffsize; + fbr1_align = rx_ring->fbr[1]->buffsize; fbr_chunksize = - (FBR_CHUNKS * rx_ring->fbr1_buffsize) + fbr1_align - 1; - rx_ring->fbr1_mem_virtaddrs[i] = + (FBR_CHUNKS * rx_ring->fbr[1]->buffsize) + fbr1_align - 1; + rx_ring->fbr[1]->mem_virtaddrs[i] = pci_alloc_consistent(adapter->pdev, fbr_chunksize, - &rx_ring->fbr1_mem_physaddrs[i]); + &rx_ring->fbr[1]->mem_physaddrs[i]); - if (!rx_ring->fbr1_mem_virtaddrs[i]) { + if (!rx_ring->fbr[1]->mem_virtaddrs[i]) { dev_err(&adapter->pdev->dev, "Could not alloc memory\n"); return -ENOMEM; } /* See NOTE in "Save Physical Address" comment above */ - fbr1_tmp_physaddr = rx_ring->fbr1_mem_physaddrs[i]; + fbr1_tmp_physaddr = rx_ring->fbr[1]->mem_physaddrs[i]; et131x_align_allocated_memory(adapter, &fbr1_tmp_physaddr, @@ -2075,8 +2061,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) * access later */ rx_ring->fbr[1]->virt[index] = - (u8 *) rx_ring->fbr1_mem_virtaddrs[i] + - (j * rx_ring->fbr1_buffsize) + fbr1_offset; + (u8 *) rx_ring->fbr[1]->mem_virtaddrs[i] + + (j * rx_ring->fbr[1]->buffsize) + fbr1_offset; /* now store the physical address in the descriptor * so the device can access it @@ -2086,7 +2072,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) rx_ring->fbr[1]->bus_low[index] = (u32) fbr1_tmp_physaddr; - fbr1_tmp_physaddr += rx_ring->fbr1_buffsize; + fbr1_tmp_physaddr += rx_ring->fbr[1]->buffsize; rx_ring->fbr[1]->buffer1[index] = rx_ring->fbr[1]->virt[index]; @@ -2097,43 +2083,43 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) #ifdef USE_FBR0 /* Same for FBR0 (if in use) */ - for (i = 0; i < (rx_ring->fbr0_num_entries / FBR_CHUNKS); i++) { + for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) { u64 fbr0_offset; u64 fbr0_tmp_physaddr; fbr_chunksize = - ((FBR_CHUNKS + 1) * rx_ring->fbr0_buffsize) - 1; - rx_ring->fbr0_mem_virtaddrs[i] = + ((FBR_CHUNKS + 1) * rx_ring->fbr[0]->buffsize) - 1; + rx_ring->fbr[0]->mem_virtaddrs[i] = pci_alloc_consistent(adapter->pdev, fbr_chunksize, - &rx_ring->fbr0_mem_physaddrs[i]); + &rx_ring->fbr[0]->mem_physaddrs[i]); - if (!rx_ring->fbr0_mem_virtaddrs[i]) { + if (!rx_ring->fbr[0]->mem_virtaddrs[i]) { dev_err(&adapter->pdev->dev, "Could not alloc memory\n"); return -ENOMEM; } /* See NOTE in "Save Physical Address" comment above */ - fbr0_tmp_physaddr = rx_ring->fbr0_mem_physaddrs[i]; + fbr0_tmp_physaddr = rx_ring->fbr[0]->mem_physaddrs[i]; et131x_align_allocated_memory(adapter, &fbr0_tmp_physaddr, &fbr0_offset, - rx_ring->fbr0_buffsize - 1); + rx_ring->fbr[0]->buffsize - 1); for (j = 0; j < FBR_CHUNKS; j++) { u32 index = (i * FBR_CHUNKS) + j; rx_ring->fbr[0]->virt[index] = - (u8 *) rx_ring->fbr0_mem_virtaddrs[i] + - (j * rx_ring->fbr0_buffsize) + fbr0_offset; + (u8 *) rx_ring->fbr[0]->mem_virtaddrs[i] + + (j * rx_ring->fbr[0]->buffsize) + fbr0_offset; rx_ring->fbr[0]->bus_high[index] = (u32) (fbr0_tmp_physaddr >> 32); rx_ring->fbr[0]->bus_low[index] = (u32) fbr0_tmp_physaddr; - fbr0_tmp_physaddr += rx_ring->fbr0_buffsize; + fbr0_tmp_physaddr += rx_ring->fbr[0]->buffsize; rx_ring->fbr[0]->buffer1[index] = rx_ring->fbr[0]->virt[index]; @@ -2228,78 +2214,78 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) } /* Free Free Buffer Ring 1 */ - if (rx_ring->fbr1_ring_virtaddr) { + if (rx_ring->fbr[1]->ring_virtaddr) { /* First the packet memory */ for (index = 0; index < - (rx_ring->fbr1_num_entries / FBR_CHUNKS); index++) { - if (rx_ring->fbr1_mem_virtaddrs[index]) { + (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); index++) { + if (rx_ring->fbr[1]->mem_virtaddrs[index]) { u32 fbr1_align; - if (rx_ring->fbr1_buffsize > 4096) + if (rx_ring->fbr[1]->buffsize > 4096) fbr1_align = 4096; else - fbr1_align = rx_ring->fbr1_buffsize; + fbr1_align = rx_ring->fbr[1]->buffsize; bufsize = - (rx_ring->fbr1_buffsize * FBR_CHUNKS) + + (rx_ring->fbr[1]->buffsize * FBR_CHUNKS) + fbr1_align - 1; pci_free_consistent(adapter->pdev, bufsize, - rx_ring->fbr1_mem_virtaddrs[index], - rx_ring->fbr1_mem_physaddrs[index]); + rx_ring->fbr[1]->mem_virtaddrs[index], + rx_ring->fbr[1]->mem_physaddrs[index]); - rx_ring->fbr1_mem_virtaddrs[index] = NULL; + rx_ring->fbr[1]->mem_virtaddrs[index] = NULL; } } /* Now the FIFO itself */ - rx_ring->fbr1_ring_virtaddr = (void *)((u8 *) - rx_ring->fbr1_ring_virtaddr - rx_ring->fbr1_offset); + rx_ring->fbr[1]->ring_virtaddr = (void *)((u8 *) + rx_ring->fbr[1]->ring_virtaddr - rx_ring->fbr[1]->offset); - bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr1_num_entries) + bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) + 0xfff; pci_free_consistent(adapter->pdev, bufsize, - rx_ring->fbr1_ring_virtaddr, - rx_ring->fbr1_ring_physaddr); + rx_ring->fbr[1]->ring_virtaddr, + rx_ring->fbr[1]->ring_physaddr); - rx_ring->fbr1_ring_virtaddr = NULL; + rx_ring->fbr[1]->ring_virtaddr = NULL; } #ifdef USE_FBR0 /* Now the same for Free Buffer Ring 0 */ - if (rx_ring->fbr0_ring_virtaddr) { + if (rx_ring->fbr[0]->ring_virtaddr) { /* First the packet memory */ for (index = 0; index < - (rx_ring->fbr0_num_entries / FBR_CHUNKS); index++) { - if (rx_ring->fbr0_mem_virtaddrs[index]) { + (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); index++) { + if (rx_ring->fbr[0]->mem_virtaddrs[index]) { bufsize = - (rx_ring->fbr0_buffsize * + (rx_ring->fbr[0]->buffsize * (FBR_CHUNKS + 1)) - 1; pci_free_consistent(adapter->pdev, bufsize, - rx_ring->fbr0_mem_virtaddrs[index], - rx_ring->fbr0_mem_physaddrs[index]); + rx_ring->fbr[0]->mem_virtaddrs[index], + rx_ring->fbr[0]->mem_physaddrs[index]); - rx_ring->fbr0_mem_virtaddrs[index] = NULL; + rx_ring->fbr[0]->mem_virtaddrs[index] = NULL; } } /* Now the FIFO itself */ - rx_ring->fbr0_ring_virtaddr = (void *)((u8 *) - rx_ring->fbr0_ring_virtaddr - rx_ring->fbr0_offset); + rx_ring->fbr[0]->ring_virtaddr = (void *)((u8 *) + rx_ring->fbr[0]->ring_virtaddr - rx_ring->fbr[0]->offset); - bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr0_num_entries) + bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) + 0xfff; pci_free_consistent(adapter->pdev, bufsize, - rx_ring->fbr0_ring_virtaddr, - rx_ring->fbr0_ring_physaddr); + rx_ring->fbr[0]->ring_virtaddr, + rx_ring->fbr[0]->ring_physaddr); - rx_ring->fbr0_ring_virtaddr = NULL; + rx_ring->fbr[0]->ring_virtaddr = NULL; } #endif @@ -2445,8 +2431,8 @@ void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) rx_local->local_psr_full = 0; /* Now's the best time to initialize FBR1 contents */ - fbr_entry = (struct fbr_desc *) rx_local->fbr1_ring_virtaddr; - for (entry = 0; entry < rx_local->fbr1_num_entries; entry++) { + fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr; + for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) { fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry]; fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry]; fbr_entry->word2 = entry; @@ -2456,42 +2442,42 @@ void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) /* Set the address and parameters of Free buffer ring 1 (and 0 if * required) into the 1310's registers */ - writel((u32) (rx_local->fbr1_real_physaddr >> 32), + writel((u32) (rx_local->fbr[1]->real_physaddr >> 32), &rx_dma->fbr1_base_hi); - writel((u32) rx_local->fbr1_real_physaddr, &rx_dma->fbr1_base_lo); - writel(rx_local->fbr1_num_entries - 1, &rx_dma->fbr1_num_des); + writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr1_base_lo); + writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr1_num_des); writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset); /* This variable tracks the free buffer ring 1 full position, so it * has to match the above. */ - rx_local->local_fbr1_full = ET_DMA10_WRAP; + rx_local->fbr[1]->local_full = ET_DMA10_WRAP; writel( - ((rx_local->fbr1_num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, + ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, &rx_dma->fbr1_min_des); #ifdef USE_FBR0 /* Now's the best time to initialize FBR0 contents */ - fbr_entry = (struct fbr_desc *) rx_local->fbr0_ring_virtaddr; - for (entry = 0; entry < rx_local->fbr0_num_entries; entry++) { + fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr; + for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) { fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry]; fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry]; fbr_entry->word2 = entry; fbr_entry++; } - writel((u32) (rx_local->fbr0_real_physaddr >> 32), + writel((u32) (rx_local->fbr[0]->real_physaddr >> 32), &rx_dma->fbr0_base_hi); - writel((u32) rx_local->fbr0_real_physaddr, &rx_dma->fbr0_base_lo); - writel(rx_local->fbr0_num_entries - 1, &rx_dma->fbr0_num_des); + writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr0_base_lo); + writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr0_num_des); writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset); /* This variable tracks the free buffer ring 0 full position, so it * has to match the above. */ - rx_local->local_fbr0_full = ET_DMA10_WRAP; + rx_local->fbr[0]->local_full = ET_DMA10_WRAP; writel( - ((rx_local->fbr0_num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, + ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, &rx_dma->fbr0_min_des); #endif @@ -2550,15 +2536,15 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) */ if ( #ifdef USE_FBR0 - (ring_index == 0 && buff_index < rx_local->fbr0_num_entries) || + (ring_index == 0 && buff_index < rx_local->fbr[0]->num_entries) || #endif - (ring_index == 1 && buff_index < rx_local->fbr1_num_entries)) { + (ring_index == 1 && buff_index < rx_local->fbr[1]->num_entries)) { spin_lock_irqsave(&adapter->fbr_lock, flags); if (ring_index == 1) { struct fbr_desc *next = - (struct fbr_desc *) (rx_local->fbr1_ring_virtaddr) + - INDEX10(rx_local->local_fbr1_full); + (struct fbr_desc *) (rx_local->fbr[1]->ring_virtaddr) + + INDEX10(rx_local->fbr[1]->local_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into @@ -2568,15 +2554,15 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) next->addr_lo = rx_local->fbr[1]->bus_low[buff_index]; next->word2 = buff_index; - writel(bump_free_buff_ring(&rx_local->local_fbr1_full, - rx_local->fbr1_num_entries - 1), + writel(bump_free_buff_ring(&rx_local->fbr[1]->local_full, + rx_local->fbr[1]->num_entries - 1), &rx_dma->fbr1_full_offset); } #ifdef USE_FBR0 else { struct fbr_desc *next = (struct fbr_desc *) - rx_local->fbr0_ring_virtaddr + - INDEX10(rx_local->local_fbr0_full); + rx_local->fbr[0]->ring_virtaddr + + INDEX10(rx_local->fbr[0]->local_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into @@ -2586,8 +2572,9 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) next->addr_lo = rx_local->fbr[0]->bus_low[buff_index]; next->word2 = buff_index; - writel(bump_free_buff_ring(&rx_local->local_fbr0_full, - rx_local->fbr0_num_entries - 1), + writel(bump_free_buff_ring( + &rx_local->fbr[0]->local_full, + rx_local->fbr[0]->num_entries - 1), &rx_dma->fbr0_full_offset); } #endif @@ -2637,19 +2624,19 @@ void et131x_rx_dma_enable(struct et131x_adapter *adapter) /* Setup the receive dma configuration register for normal operation */ u32 csr = 0x2000; /* FBR1 enable */ - if (adapter->rx_ring.fbr1_buffsize == 4096) + if (adapter->rx_ring.fbr[1]->buffsize == 4096) csr |= 0x0800; - else if (adapter->rx_ring.fbr1_buffsize == 8192) + else if (adapter->rx_ring.fbr[1]->buffsize == 8192) csr |= 0x1000; - else if (adapter->rx_ring.fbr1_buffsize == 16384) + else if (adapter->rx_ring.fbr[1]->buffsize == 16384) csr |= 0x1800; #ifdef USE_FBR0 csr |= 0x0400; /* FBR0 enable */ - if (adapter->rx_ring.fbr0_buffsize == 256) + if (adapter->rx_ring.fbr[0]->buffsize == 256) csr |= 0x0100; - else if (adapter->rx_ring.fbr0_buffsize == 512) + else if (adapter->rx_ring.fbr[0]->buffsize == 512) csr |= 0x0200; - else if (adapter->rx_ring.fbr0_buffsize == 1024) + else if (adapter->rx_ring.fbr[0]->buffsize == 1024) csr |= 0x0300; #endif writel(csr, &adapter->regs->rxdma.csr); @@ -2750,11 +2737,11 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) #ifdef USE_FBR0 if (ring_index > 1 || (ring_index == 0 && - buff_index > rx_local->fbr0_num_entries - 1) || + buff_index > rx_local->fbr[0]->num_entries - 1) || (ring_index == 1 && - buff_index > rx_local->fbr1_num_entries - 1)) + buff_index > rx_local->fbr[1]->num_entries - 1)) #else - if (ring_index != 1 || buff_index > rx_local->fbr1_num_entries - 1) + if (ring_index != 1 || buff_index > rx_local->fbr[1]->num_entries - 1) #endif { /* Illegal buffer or ring index cannot be used by S/W*/ |