Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull scsi-target changes from Nicholas Bellinger:
 "There has been lots of work in existing code in a number of areas this
  past cycle.  The major highlights have been:

   * Removal of transport_do_task_sg_chain() from core + fabrics
     (Roland)
   * target-core: Removal of se_task abstraction from target-core and
     enforce hw_max_sectors for pSCSI backends (hch)
   * Re-factoring of iscsi-target tx immediate/response queues (agrover)
   * Conversion of iscsi-target back to using target core memory
     allocation logic (agrover)

  We've had one last minute iscsi-target patch go into for-next to
  address a nasty regression bug related to the target core allocation
  logic conversion from agrover that is not included in friday's
  linux-next build, but has been included in this series.

  On the new fabric module code front for-3.5, here is a brief status
  update for the three currently in flight this round:

   * usb-gadget target driver:

  Sebastian Siewior's driver for supporting usb-gadget target mode
  operation.  This will be going out as a separate PULL request from
  target-pending/usb-target-merge with subsystem maintainer ACKs.  There
  is one minor target-core patch in this series required to function.

   * sbp ieee-1394/firewire target driver:

  Chris Boot's driver for supportting the Serial Block Protocol (SBP)
  across IEEE-1394 Firewire hardware.  This will be going out as a
  separate PULL request from target-pending/sbp-target-merge with two
  additional drivers/firewire/ patches w/ subsystem maintainer ACKs.

   * qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:

  The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
  and tcm_qla2xxx fabric driver.  Support for FC target mode using
  qla2xxx LLD code has been officially submitted by Qlogic to James
  below, and is currently outstanding but not yet merged into
  scsi.git/for-next..

    [PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
    http://www.spinics.net/lists/linux-scsi/msg59350.html

  Note there are *zero* direct dependencies upon this for-next series
  for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and
  over the last days the target mode team has been tracking down an
  tcm_qla2xxx specific active I/O shutdown bug that appears to now be
  almost squashed for 3.5-rc-fixes."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits)
  iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
  iscsi-target: remove dead code in iscsi_check_valuelist_for_support
  target: Handle ATA_16 passthrough for pSCSI backend devices
  target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
  target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
  target: add support for the WRITE_VERIFY command
  target: make target_put_session void
  target: cleanup transport_execute_tasks()
  target: Remove max_sectors device attribute for modern se_task less code
  target: lock => unlock typo in transport_lun_wait_for_tasks
  target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
  target: remove the t_se_count field in struct se_cmd
  target: remove the t_task_cdbs_ex_left field in struct se_cmd
  target: remove the t_task_cdbs_left field in struct se_cmd
  target: remove struct se_task
  target: move the state and execute lists to the command
  target: simplify command to task linkage
  target: always allocate a single task
  target: replace ->execute_task with ->execute_cmd
  target: remove the task_sectors field in struct se_task
  ...

1 files changed, 8 insertions, 76 deletions

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index aa62677..5ad9728 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -643,9 +643,8 @@ void core_dev_unexport(
 	lun->lun_se_dev = NULL;
 }
 
-int target_report_luns(struct se_task *se_task)
+int target_report_luns(struct se_cmd *se_cmd)
 {
-	struct se_cmd *se_cmd = se_task->task_se_cmd;
 	struct se_dev_entry *deve;
 	struct se_session *se_sess = se_cmd->se_sess;
 	unsigned char *buf;
@@ -696,8 +695,7 @@ done:
 	buf[3] = (lun_count & 0xff);
 	transport_kunmap_data_sg(se_cmd);
 
-	se_task->task_scsi_status = GOOD;
-	transport_complete_task(se_task, 1);
+	target_complete_cmd(se_cmd, GOOD);
 	return 0;
 }
 
@@ -878,15 +876,12 @@ void se_dev_set_default_attribs(
 	dev->se_sub_dev->se_dev_attrib.hw_block_size = limits->logical_block_size;
 	dev->se_sub_dev->se_dev_attrib.block_size = limits->logical_block_size;
 	/*
-	 * max_sectors is based on subsystem plugin dependent requirements.
+	 * Align max_hw_sectors down to PAGE_SIZE I/O transfers
 	 */
-	dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors;
-	/*
-	 * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
-	 */
-	limits->max_sectors = se_dev_align_max_sectors(limits->max_sectors,
+	limits->max_hw_sectors = se_dev_align_max_sectors(limits->max_hw_sectors,
 						limits->logical_block_size);
-	dev->se_sub_dev->se_dev_attrib.max_sectors = limits->max_sectors;
+	dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors;
+
 	/*
 	 * Set fabric_max_sectors, which is reported in block limits
 	 * VPD page (B0h).
@@ -1170,64 +1165,6 @@ int se_dev_set_queue_depth(struct se_device *dev, u32 queue_depth)
 	return 0;
 }
 
-int se_dev_set_max_sectors(struct se_device *dev, u32 max_sectors)
-{
-	int force = 0; /* Force setting for VDEVS */
-
-	if (atomic_read(&dev->dev_export_obj.obj_access_count)) {
-		pr_err("dev[%p]: Unable to change SE Device"
-			" max_sectors while dev_export_obj: %d count exists\n",
-			dev, atomic_read(&dev->dev_export_obj.obj_access_count));
-		return -EINVAL;
-	}
-	if (!max_sectors) {
-		pr_err("dev[%p]: Illegal ZERO value for"
-			" max_sectors\n", dev);
-		return -EINVAL;
-	}
-	if (max_sectors < DA_STATUS_MAX_SECTORS_MIN) {
-		pr_err("dev[%p]: Passed max_sectors: %u less than"
-			" DA_STATUS_MAX_SECTORS_MIN: %u\n", dev, max_sectors,
-				DA_STATUS_MAX_SECTORS_MIN);
-		return -EINVAL;
-	}
-	if (dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) {
-		if (max_sectors > dev->se_sub_dev->se_dev_attrib.hw_max_sectors) {
-			pr_err("dev[%p]: Passed max_sectors: %u"
-				" greater than TCM/SE_Device max_sectors:"
-				" %u\n", dev, max_sectors,
-				dev->se_sub_dev->se_dev_attrib.hw_max_sectors);
-			 return -EINVAL;
-		}
-	} else {
-		if (!force && (max_sectors >
-				 dev->se_sub_dev->se_dev_attrib.hw_max_sectors)) {
-			pr_err("dev[%p]: Passed max_sectors: %u"
-				" greater than TCM/SE_Device max_sectors"
-				": %u, use force=1 to override.\n", dev,
-				max_sectors, dev->se_sub_dev->se_dev_attrib.hw_max_sectors);
-			return -EINVAL;
-		}
-		if (max_sectors > DA_STATUS_MAX_SECTORS_MAX) {
-			pr_err("dev[%p]: Passed max_sectors: %u"
-				" greater than DA_STATUS_MAX_SECTORS_MAX:"
-				" %u\n", dev, max_sectors,
-				DA_STATUS_MAX_SECTORS_MAX);
-			return -EINVAL;
-		}
-	}
-	/*
-	 * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
-	 */
-	max_sectors = se_dev_align_max_sectors(max_sectors,
-				dev->se_sub_dev->se_dev_attrib.block_size);
-
-	dev->se_sub_dev->se_dev_attrib.max_sectors = max_sectors;
-	pr_debug("dev[%p]: SE Device max_sectors changed to %u\n",
-			dev, max_sectors);
-	return 0;
-}
-
 int se_dev_set_fabric_max_sectors(struct se_device *dev, u32 fabric_max_sectors)
 {
 	if (atomic_read(&dev->dev_export_obj.obj_access_count)) {
@@ -1341,7 +1278,6 @@ struct se_lun *core_dev_add_lun(
 	u32 lun)
 {
 	struct se_lun *lun_p;
-	u32 lun_access = 0;
 	int rc;
 
 	if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) {
@@ -1354,12 +1290,8 @@ struct se_lun *core_dev_add_lun(
 	if (IS_ERR(lun_p))
 		return lun_p;
 
-	if (dev->dev_flags & DF_READ_ONLY)
-		lun_access = TRANSPORT_LUNFLAGS_READ_ONLY;
-	else
-		lun_access = TRANSPORT_LUNFLAGS_READ_WRITE;
-
-	rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev);
+	rc = core_tpg_post_addlun(tpg, lun_p,
+				TRANSPORT_LUNFLAGS_READ_WRITE, dev);
 	if (rc < 0)
 		return ERR_PTR(rc);