Merge branch 'depends/tty-omap-serial' into next/cleanup

This part of the tty tree (unfortunately with all the preceding patches
as well) is a dependency for some of the OMAP cleanups, so we've pulled
it in as a dependency based on agreement with Greg.

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 46 insertions, 17 deletions

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 90cc680..cfda47d 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -643,7 +643,7 @@ static int mxser_change_speed(struct tty_struct *tty,
 	int ret = 0;
 	unsigned char status;
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 	if (!info->ioaddr)
 		return ret;
 
@@ -830,7 +830,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
 			wake_up_interruptible(&port->port.open_wait);
 	}
 
-	if (port->port.flags & ASYNC_CTS_FLOW) {
+	if (tty_port_cts_enabled(&port->port)) {
 		if (tty->hw_stopped) {
 			if (status & UART_MSR_CTS) {
 				tty->hw_stopped = 0;
@@ -1520,10 +1520,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 				
 				tty = tty_port_tty_get(port);
 
-				if (!tty || !tty->termios)
+				if (!tty)
 					ms.cflag = ip->normal_termios.c_cflag;
 				else
-					ms.cflag = tty->termios->c_cflag;
+					ms.cflag = tty->termios.c_cflag;
 				tty_kref_put(tty);
 				spin_lock_irq(&ip->slock);
 				status = inb(ip->ioaddr + UART_MSR);
@@ -1589,13 +1589,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 				tty = tty_port_tty_get(&ip->port);
 
-				if (!tty || !tty->termios) {
+				if (!tty) {
 					cflag = ip->normal_termios.c_cflag;
 					iflag = ip->normal_termios.c_iflag;
 					me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
 				} else {
-					cflag = tty->termios->c_cflag;
-					iflag = tty->termios->c_iflag;
+					cflag = tty->termios.c_cflag;
+					iflag = tty->termios.c_iflag;
 					me->baudrate[p] = tty_get_baud_rate(tty);
 				}
 				tty_kref_put(tty);
@@ -1853,7 +1853,7 @@ static void mxser_stoprx(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		info->MCR &= ~UART_MCR_RTS;
 		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
@@ -1890,7 +1890,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		info->MCR |= UART_MCR_RTS;
 		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
@@ -1939,14 +1939,14 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
-			!(tty->termios->c_cflag & CRTSCTS)) {
+			!(tty->termios.c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
 		mxser_start(tty);
 	}
 
 	/* Handle sw stopped */
 	if ((old_termios->c_iflag & IXON) &&
-			!(tty->termios->c_iflag & IXON)) {
+			!(tty->termios.c_iflag & IXON)) {
 		tty->stopped = 0;
 
 		if (info->board->chip_flag) {
@@ -2337,11 +2337,36 @@ static struct tty_port_operations mxser_port_ops = {
  * The MOXA Smartio/Industio serial driver boot-time initialization code!
  */
 
+static bool allow_overlapping_vector;
+module_param(allow_overlapping_vector, bool, S_IRUGO);
+MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
+
+static bool mxser_overlapping_vector(struct mxser_board *brd)
+{
+	return allow_overlapping_vector &&
+		brd->vector >= brd->ports[0].ioaddr &&
+		brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
+}
+
+static int mxser_request_vector(struct mxser_board *brd)
+{
+	if (mxser_overlapping_vector(brd))
+		return 0;
+	return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
+}
+
+static void mxser_release_vector(struct mxser_board *brd)
+{
+	if (mxser_overlapping_vector(brd))
+		return;
+	release_region(brd->vector, 1);
+}
+
 static void mxser_release_ISA_res(struct mxser_board *brd)
 {
 	free_irq(brd->irq, brd);
 	release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-	release_region(brd->vector, 1);
+	mxser_release_vector(brd);
 }
 
 static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2396,7 +2421,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
 static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 {
-	int id, i, bits;
+	int id, i, bits, ret;
 	unsigned short regs[16], irq;
 	unsigned char scratch, scratch2;
 
@@ -2492,13 +2517,15 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 				8 * brd->info->nports - 1);
 		return -EIO;
 	}
-	if (!request_region(brd->vector, 1, "mxser(vector)")) {
+
+	ret = mxser_request_vector(brd);
+	if (ret) {
 		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
 		printk(KERN_ERR "mxser: can't request interrupt vector region: "
 				"0x%.8lx-0x%.8lx\n",
 				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
 				8 * brd->info->nports - 1);
-		return -EIO;
+		return ret;
 	}
 	return brd->info->nports;
 
@@ -2598,7 +2625,8 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 		goto err_rel3;
 
 	for (i = 0; i < brd->info->nports; i++)
-		tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+		tty_port_register_device(&brd->ports[i].port, mxvar_sdriver,
+				brd->idx + i, &pdev->dev);
 
 	pci_set_drvdata(pdev, brd);
 
@@ -2695,7 +2723,8 @@ static int __init mxser_module_init(void)
 
 		brd->idx = m * MXSER_PORTS_PER_BOARD;
 		for (i = 0; i < brd->info->nports; i++)
-			tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
+			tty_port_register_device(&brd->ports[i].port,
+					mxvar_sdriver, brd->idx + i, NULL);
 
 		m++;
 	}