diff options
author | Jingchang Lu <b35083@freescale.com> | 2013-06-07 01:20:40 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-06-09 05:30:44 (GMT) |
commit | c9e2e946fb0ba5d2398feb89558f98c5c28e23e3 (patch) | |
tree | c2cebc2606be1bd35623147381de3dbab3a11802 /drivers/tty/serial/fsl_lpuart.c | |
parent | 1ba7055af26f008e8fc8dab9dcb1701534afbe16 (diff) | |
download | linux-fsl-qoriq-c9e2e946fb0ba5d2398feb89558f98c5c28e23e3.tar.xz |
tty: serial: add Freescale lpuart driver support
Add Freescale lpuart driver support. The lpuart device
can be found on Vybrid VF610 and Layerscape LS-1 SoCs.
Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 874 |
1 files changed, 874 insertions, 0 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c new file mode 100644 index 0000000..263cfaa --- /dev/null +++ b/drivers/tty/serial/fsl_lpuart.c @@ -0,0 +1,874 @@ +/* + * Freescale lpuart serial port driver + * + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/console.h> +#include <linux/serial_core.h> +#include <linux/tty_flip.h> + +/* All registers are 8-bit width */ +#define UARTBDH 0x00 +#define UARTBDL 0x01 +#define UARTCR1 0x02 +#define UARTCR2 0x03 +#define UARTSR1 0x04 +#define UARTCR3 0x06 +#define UARTDR 0x07 +#define UARTCR4 0x0a +#define UARTCR5 0x0b +#define UARTMODEM 0x0d +#define UARTPFIFO 0x10 +#define UARTCFIFO 0x11 +#define UARTSFIFO 0x12 +#define UARTTWFIFO 0x13 +#define UARTTCFIFO 0x14 +#define UARTRWFIFO 0x15 + +#define UARTBDH_LBKDIE 0x80 +#define UARTBDH_RXEDGIE 0x40 +#define UARTBDH_SBR_MASK 0x1f + +#define UARTCR1_LOOPS 0x80 +#define UARTCR1_RSRC 0x20 +#define UARTCR1_M 0x10 +#define UARTCR1_WAKE 0x08 +#define UARTCR1_ILT 0x04 +#define UARTCR1_PE 0x02 +#define UARTCR1_PT 0x01 + +#define UARTCR2_TIE 0x80 +#define UARTCR2_TCIE 0x40 +#define UARTCR2_RIE 0x20 +#define UARTCR2_ILIE 0x10 +#define UARTCR2_TE 0x08 +#define UARTCR2_RE 0x04 +#define UARTCR2_RWU 0x02 +#define UARTCR2_SBK 0x01 + +#define UARTSR1_TDRE 0x80 +#define UARTSR1_TC 0x40 +#define UARTSR1_RDRF 0x20 +#define UARTSR1_IDLE 0x10 +#define UARTSR1_OR 0x08 +#define UARTSR1_NF 0x04 +#define UARTSR1_FE 0x02 +#define UARTSR1_PE 0x01 + +#define UARTCR3_R8 0x80 +#define UARTCR3_T8 0x40 +#define UARTCR3_TXDIR 0x20 +#define UARTCR3_TXINV 0x10 +#define UARTCR3_ORIE 0x08 +#define UARTCR3_NEIE 0x04 +#define UARTCR3_FEIE 0x02 +#define UARTCR3_PEIE 0x01 + +#define UARTCR4_MAEN1 0x80 +#define UARTCR4_MAEN2 0x40 +#define UARTCR4_M10 0x20 +#define UARTCR4_BRFA_MASK 0x1f +#define UARTCR4_BRFA_OFF 0 + +#define UARTCR5_TDMAS 0x80 +#define UARTCR5_RDMAS 0x20 + +#define UARTMODEM_RXRTSE 0x08 +#define UARTMODEM_TXRTSPOL 0x04 +#define UARTMODEM_TXRTSE 0x02 +#define UARTMODEM_TXCTSE 0x01 + +#define UARTPFIFO_TXFE 0x80 +#define UARTPFIFO_FIFOSIZE_MASK 0x7 +#define UARTPFIFO_TXSIZE_OFF 4 +#define UARTPFIFO_RXFE 0x08 +#define UARTPFIFO_RXSIZE_OFF 0 + +#define UARTCFIFO_TXFLUSH 0x80 +#define UARTCFIFO_RXFLUSH 0x40 +#define UARTCFIFO_RXOFE 0x04 +#define UARTCFIFO_TXOFE 0x02 +#define UARTCFIFO_RXUFE 0x01 + +#define UARTSFIFO_TXEMPT 0x80 +#define UARTSFIFO_RXEMPT 0x40 +#define UARTSFIFO_RXOF 0x04 +#define UARTSFIFO_TXOF 0x02 +#define UARTSFIFO_RXUF 0x01 + +#define DRIVER_NAME "fsl-lpuart" +#define DEV_NAME "ttyLP" +#define UART_NR 6 + +struct lpuart_port { + struct uart_port port; + struct clk *clk; + unsigned int txfifo_size; + unsigned int rxfifo_size; +}; + +static struct of_device_id lpuart_dt_ids[] = { + { + .compatible = "fsl,vf610-lpuart", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, lpuart_dt_ids); + +static void lpuart_stop_tx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TIE | UARTCR2_TCIE); + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart_stop_rx(struct uart_port *port) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2); +} + +static void lpuart_enable_ms(struct uart_port *port) +{ +} + +static inline void lpuart_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + while (!uart_circ_empty(xmit) && + (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) { + writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart_stop_tx(&sport->port); +} + +static void lpuart_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned char temp; + + temp = readb(port->membase + UARTCR2); + writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); + + if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) + lpuart_transmit_buffer(sport); +} + +static irqreturn_t lpuart_txint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + if (sport->port.x_char) { + writeb(sport->port.x_char, sport->port.membase + UARTDR); + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + lpuart_stop_tx(&sport->port); + goto out; + } + + lpuart_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t lpuart_rxint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned int flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned char rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read SR1 then read DR + */ + sr = readb(sport->port.membase + UARTSR1); + rx = readb(sport->port.membase + UARTDR); + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) { + if (sr & UARTSR1_PE) + sport->port.icount.parity++; + else if (sr & UARTSR1_FE) + sport->port.icount.frame++; + + if (sr & UARTSR1_OR) + sport->port.icount.overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSR1_PE) + flg = TTY_PARITY; + else if (sr & UARTSR1_FE) + flg = TTY_FRAME; + + if (sr & UARTSR1_OR) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); + return IRQ_HANDLED; +} + +static irqreturn_t lpuart_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned char sts; + + sts = readb(sport->port.membase + UARTSR1); + + if (sts & UARTSR1_RDRF) + lpuart_rxint(irq, dev_id); + + if (sts & UARTSR1_TDRE && + !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) + lpuart_txint(irq, dev_id); + + return IRQ_HANDLED; +} + +/* return TIOCSER_TEMT when transmitter is not busy */ +static unsigned int lpuart_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + UARTSR1) & UARTSR1_TC) ? + TIOCSER_TEMT : 0; +} + +static unsigned int lpuart_get_mctrl(struct uart_port *port) +{ + unsigned int temp = 0; + unsigned char reg; + + reg = readb(port->membase + UARTMODEM); + if (reg & UARTMODEM_TXCTSE) + temp |= TIOCM_CTS; + + if (reg & UARTMODEM_RXRTSE) + temp |= TIOCM_RTS; + + return temp; +} + +static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char temp; + + temp = readb(port->membase + UARTMODEM) & + ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + + if (mctrl & TIOCM_RTS) + temp |= UARTMODEM_RXRTSE; + + if (mctrl & TIOCM_CTS) + temp |= UARTMODEM_TXCTSE; + + writeb(temp, port->membase + UARTMODEM); +} + +static void lpuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned char temp; + + temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK; + + if (break_state != 0) + temp |= UARTCR2_SBK; + + writeb(temp, port->membase + UARTCR2); +} + +static void lpuart_setup_watermark(struct lpuart_port *sport) +{ + unsigned char val, cr2; + + cr2 = readb(sport->port.membase + UARTCR2); + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE | + UARTCR2_RIE | UARTCR2_RE); + writeb(cr2, sport->port.membase + UARTCR2); + + /* determine FIFO size and enable FIFO mode */ + val = readb(sport->port.membase + UARTPFIFO); + + sport->txfifo_size = 0x1 << (((val >> UARTPFIFO_TXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK) + 1); + + sport->rxfifo_size = 0x1 << (((val >> UARTPFIFO_RXSIZE_OFF) & + UARTPFIFO_FIFOSIZE_MASK) + 1); + + writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, + sport->port.membase + UARTPFIFO); + + /* flush Tx and Rx FIFO */ + writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, + sport->port.membase + UARTCFIFO); + + writeb(2, sport->port.membase + UARTTWFIFO); + writeb(1, sport->port.membase + UARTRWFIFO); +} + +static int lpuart_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + int ret; + unsigned long flags; + unsigned char temp; + + ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0, + DRIVER_NAME, sport); + if (ret) + return ret; + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart_setup_watermark(sport); + + temp = readb(sport->port.membase + UARTCR2); + temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE); + writeb(temp, sport->port.membase + UARTCR2); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return 0; +} + +static void lpuart_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned char temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = readb(port->membase + UARTCR2); + temp &= ~(UARTCR2_TE | UARTCR2_RE | + UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(temp, port->membase + UARTCR2); + + spin_unlock_irqrestore(&port->lock, flags); + + devm_free_irq(port->dev, port->irq, sport); +} + +static void +lpuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int sbr, brfa; + + cr1 = old_cr1 = readb(sport->port.membase + UARTCR1); + old_cr2 = readb(sport->port.membase + UARTCR2); + cr4 = readb(sport->port.membase + UARTCR4); + bdh = readb(sport->port.membase + UARTBDH); + modem = readb(sport->port.membase + UARTMODEM); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + cr1 = old_cr1 & ~UARTCR1_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + cr1 |= UARTCR1_M; + } + + if (termios->c_cflag & CRTSCTS) { + modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } else { + termios->c_cflag &= ~CRTSCTS; + modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + if (termios->c_cflag & CMSPAR) { + cr1 &= ~UARTCR1_PE; + cr1 |= UARTCR1_M; + } else { + cr1 |= UARTCR1_PE; + if ((termios->c_cflag & CSIZE) == CS8) + cr1 |= UARTCR1_M; + if (termios->c_cflag & PARODD) + cr1 |= UARTCR1_PT; + else + cr1 &= ~UARTCR1_PT; + } + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSR1_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSR1_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSR1_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* wait transmit engin complete */ + while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) + barrier(); + + /* disable transmit and receive */ + writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE), + sport->port.membase + UARTCR2); + + sbr = sport->port.uartclk / (16 * baud); + brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud; + bdh &= ~UARTBDH_SBR_MASK; + bdh |= (sbr >> 8) & 0x1F; + cr4 &= ~UARTCR4_BRFA_MASK; + brfa &= UARTCR4_BRFA_MASK; + writeb(cr4 | brfa, sport->port.membase + UARTCR4); + writeb(bdh, sport->port.membase + UARTBDH); + writeb(sbr & 0xFF, sport->port.membase + UARTBDL); + writeb(cr1, sport->port.membase + UARTCR1); + writeb(modem, sport->port.membase + UARTMODEM); + + /* restore control register */ + writeb(old_cr2, sport->port.membase + UARTCR2); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *lpuart_type(struct uart_port *port) +{ + return "FSL_LPUART"; +} + +static void lpuart_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int lpuart_request_port(struct uart_port *port) +{ + return 0; +} + +/* configure/autoconfigure the port */ +static void lpuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_LPUART; +} + +static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops lpuart_pops = { + .tx_empty = lpuart_tx_empty, + .set_mctrl = lpuart_set_mctrl, + .get_mctrl = lpuart_get_mctrl, + .stop_tx = lpuart_stop_tx, + .start_tx = lpuart_start_tx, + .stop_rx = lpuart_stop_rx, + .enable_ms = lpuart_enable_ms, + .break_ctl = lpuart_break_ctl, + .startup = lpuart_startup, + .shutdown = lpuart_shutdown, + .set_termios = lpuart_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, +}; + +static struct lpuart_port *lpuart_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE +static void lpuart_console_putchar(struct uart_port *port, int ch) +{ + while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE)) + barrier(); + + writeb(ch, port->membase + UARTDR); +} + +static void +lpuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned char old_cr2, cr2; + + /* first save CR2 and then disable interrupts */ + cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); + cr2 |= (UARTCR2_TE | UARTCR2_RE); + cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); + writeb(cr2, sport->port.membase + UARTCR2); + + uart_console_write(&sport->port, s, count, lpuart_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) + barrier(); + + writeb(old_cr2, sport->port.membase + UARTCR2); +} + +/* + * if the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +lpuart_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned char cr, bdh, bdl, brfa; + unsigned int sbr, uartclk, baud_raw; + + cr = readb(sport->port.membase + UARTCR2); + cr &= UARTCR2_TE | UARTCR2_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = readb(sport->port.membase + UARTCR1); + + *parity = 'n'; + if (cr & UARTCR1_PE) { + if (cr & UARTCR1_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCR1_M) + *bits = 9; + else + *bits = 8; + + bdh = readb(sport->port.membase + UARTBDH); + bdh &= UARTBDH_SBR_MASK; + bdl = readb(sport->port.membase + UARTBDL); + sbr = bdh; + sbr <<= 8; + sbr |= bdl; + brfa = readb(sport->port.membase + UARTCR4); + brfa &= UARTCR4_BRFA_MASK; + + uartclk = clk_get_rate(sport->clk); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * (sbr + brfa / 32)); + + if (*baud != baud_raw) + printk(KERN_INFO "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + +static int __init lpuart_console_setup(struct console *co, char *options) +{ + struct lpuart_port *sport; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports)) + co->index = 0; + + sport = lpuart_ports[co->index]; + if (sport == NULL) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + lpuart_console_get_options(sport, &baud, &parity, &bits); + + lpuart_setup_watermark(sport); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver lpuart_reg; +static struct console lpuart_console = { + .name = DEV_NAME, + .write = lpuart_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + +#define LPUART_CONSOLE (&lpuart_console) +#else +#define LPUART_CONSOLE NULL +#endif + +static struct uart_driver lpuart_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .nr = ARRAY_SIZE(lpuart_ports), + .cons = LPUART_CONSOLE, +}; + +static int lpuart_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct lpuart_port *sport; + struct resource *res; + int ret; + + sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + pdev->dev.coherent_dma_mask = 0; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + sport->port.mapbase = res->start; + sport->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sport->port.membase)) + return PTR_ERR(sport->port.membase); + + sport->port.dev = &pdev->dev; + sport->port.type = PORT_LPUART; + sport->port.iotype = UPIO_MEM; + sport->port.irq = platform_get_irq(pdev, 0); + sport->port.ops = &lpuart_pops; + sport->port.flags = UPF_BOOT_AUTOCONF; + + sport->clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(sport->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret); + return ret; + } + + sport->port.uartclk = clk_get_rate(sport->clk); + + lpuart_ports[sport->port.line] = sport; + + platform_set_drvdata(pdev, &sport->port); + + ret = uart_add_one_port(&lpuart_reg, &sport->port); + if (ret) { + clk_disable_unprepare(sport->clk); + return ret; + } + + return 0; +} + +static int lpuart_remove(struct platform_device *pdev) +{ + struct lpuart_port *sport = platform_get_drvdata(pdev); + + uart_remove_one_port(&lpuart_reg, &sport->port); + + clk_disable_unprepare(sport->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int lpuart_suspend(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + + uart_suspend_port(&lpuart_reg, &sport->port); + + return 0; +} + +static int lpuart_resume(struct device *dev) +{ + struct lpuart_port *sport = dev_get_drvdata(dev); + + uart_resume_port(&lpuart_reg, &sport->port); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume); + +static struct platform_driver lpuart_driver = { + .probe = lpuart_probe, + .remove = lpuart_remove, + .driver = { + .name = "fsl-lpuart", + .owner = THIS_MODULE, + .of_match_table = lpuart_dt_ids, + .pm = &lpuart_pm_ops, + }, +}; + +static int __init lpuart_serial_init(void) +{ + int ret; + + pr_info("serial: Freescale lpuart driver\n"); + + ret = uart_register_driver(&lpuart_reg); + if (ret) + return ret; + + ret = platform_driver_register(&lpuart_driver); + if (ret) + uart_unregister_driver(&lpuart_reg); + + return 0; +} + +static void __exit lpuart_serial_exit(void) +{ + platform_driver_unregister(&lpuart_driver); + uart_unregister_driver(&lpuart_reg); +} + +module_init(lpuart_serial_init); +module_exit(lpuart_serial_exit); + +MODULE_DESCRIPTION("Freescale lpuart serial port driver"); +MODULE_LICENSE("GPL v2"); |