serial: omap: don't access the platform_device

The driver doesn't need to know about its platform_device.

Everything the driver needs can be done through the
struct device pointer. In case we need to use the
OMAP-specific PM function pointers, those can make
sure to find the device's platform_device pointer
so they can find the struct omap_device through
pdev->archdata field.

Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 62 insertions, 62 deletions

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 3a60b86..5af5d22 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -104,36 +104,36 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
 
 static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 {
-	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (!pdata->get_context_loss_count)
 		return 0;
 
-	return pdata->get_context_loss_count(&up->pdev->dev);
+	return pdata->get_context_loss_count(up->dev);
 }
 
 static void serial_omap_set_forceidle(struct uart_omap_port *up)
 {
-	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (pdata->set_forceidle)
-		pdata->set_forceidle(up->pdev);
+		pdata->set_forceidle(up->dev);
 }
 
 static void serial_omap_set_noidle(struct uart_omap_port *up)
 {
-	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (pdata->set_noidle)
-		pdata->set_noidle(up->pdev);
+		pdata->set_noidle(up->dev);
 }
 
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
-	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (pdata->enable_wakeup)
-		pdata->enable_wakeup(up->pdev, enable);
+		pdata->enable_wakeup(up->dev, enable);
 }
 
 /*
@@ -169,8 +169,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up)
 		omap_free_dma(up->uart_dma.rx_dma_channel);
 		up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
 		up->uart_dma.rx_dma_used = false;
-		pm_runtime_mark_last_busy(&up->pdev->dev);
-		pm_runtime_put_autosuspend(&up->pdev->dev);
+		pm_runtime_mark_last_busy(up->dev);
+		pm_runtime_put_autosuspend(up->dev);
 	}
 }
 
@@ -180,16 +180,16 @@ static void serial_omap_enable_ms(struct uart_port *port)
 
 	dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	up->ier |= UART_IER_MSI;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 }
 
 static void serial_omap_stop_tx(struct uart_port *port)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
-	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	struct omap_uart_port_info *pdata = up->dev->platform_data;
 
 	if (up->use_dma &&
 		up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
@@ -202,11 +202,11 @@ static void serial_omap_stop_tx(struct uart_port *port)
 		omap_stop_dma(up->uart_dma.tx_dma_channel);
 		omap_free_dma(up->uart_dma.tx_dma_channel);
 		up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
-		pm_runtime_mark_last_busy(&up->pdev->dev);
-		pm_runtime_put_autosuspend(&up->pdev->dev);
+		pm_runtime_mark_last_busy(up->dev);
+		pm_runtime_put_autosuspend(up->dev);
 	}
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	if (up->ier & UART_IER_THRI) {
 		up->ier &= ~UART_IER_THRI;
 		serial_out(up, UART_IER, up->ier);
@@ -215,22 +215,22 @@ static void serial_omap_stop_tx(struct uart_port *port)
 	if (!up->use_dma && pdata)
 		serial_omap_set_forceidle(up);
 
-	pm_runtime_mark_last_busy(&up->pdev->dev);
-	pm_runtime_put_autosuspend(&up->pdev->dev);
+	pm_runtime_mark_last_busy(up->dev);
+	pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_rx(struct uart_port *port)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	if (up->use_dma)
 		serial_omap_stop_rxdma(up);
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_mark_last_busy(&up->pdev->dev);
-	pm_runtime_put_autosuspend(&up->pdev->dev);
+	pm_runtime_mark_last_busy(up->dev);
+	pm_runtime_put_autosuspend(up->dev);
 }
 
 static inline void receive_chars(struct uart_omap_port *up,
@@ -348,11 +348,11 @@ static void serial_omap_start_tx(struct uart_port *port)
 	int ret = 0;
 
 	if (!up->use_dma) {
-		pm_runtime_get_sync(&up->pdev->dev);
+		pm_runtime_get_sync(up->dev);
 		serial_omap_enable_ier_thri(up);
 		serial_omap_set_noidle(up);
-		pm_runtime_mark_last_busy(&up->pdev->dev);
-		pm_runtime_put_autosuspend(&up->pdev->dev);
+		pm_runtime_mark_last_busy(up->dev);
+		pm_runtime_put_autosuspend(up->dev);
 		return;
 	}
 
@@ -362,7 +362,7 @@ static void serial_omap_start_tx(struct uart_port *port)
 	xmit = &up->port.state->xmit;
 
 	if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
-		pm_runtime_get_sync(&up->pdev->dev);
+		pm_runtime_get_sync(up->dev);
 		ret = omap_request_dma(up->uart_dma.uart_dma_tx,
 				"UART Tx DMA",
 				(void *)uart_tx_dma_callback, up,
@@ -445,11 +445,11 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
 	unsigned int iir, lsr;
 	unsigned long flags;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	iir = serial_in(up, UART_IIR);
 	if (iir & UART_IIR_NO_INT) {
-		pm_runtime_mark_last_busy(&up->pdev->dev);
-		pm_runtime_put_autosuspend(&up->pdev->dev);
+		pm_runtime_mark_last_busy(up->dev);
+		pm_runtime_put_autosuspend(up->dev);
 		return IRQ_NONE;
 	}
 
@@ -473,8 +473,8 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
 		transmit_chars(up);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(&up->pdev->dev);
-	pm_runtime_put_autosuspend(&up->pdev->dev);
+	pm_runtime_mark_last_busy(up->dev);
+	pm_runtime_put_autosuspend(up->dev);
 
 	up->port_activity = jiffies;
 	return IRQ_HANDLED;
@@ -486,12 +486,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 	unsigned long flags = 0;
 	unsigned int ret = 0;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
 	spin_lock_irqsave(&up->port.lock, flags);
 	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 	return ret;
 }
 
@@ -501,9 +501,9 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 	unsigned int status;
 	unsigned int ret = 0;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	status = check_modem_status(up);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 
 	dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
@@ -535,11 +535,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	up->mcr = serial_in(up, UART_MCR);
 	up->mcr |= mcr;
 	serial_out(up, UART_MCR, up->mcr);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 
 	if (gpio_is_valid(up->DTR_gpio) &&
 	    !!(mctrl & TIOCM_DTR) != up->DTR_active) {
@@ -558,7 +558,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 	unsigned long flags = 0;
 
 	dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 	if (break_state == -1)
 		up->lcr |= UART_LCR_SBC;
@@ -566,7 +566,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 		up->lcr &= ~UART_LCR_SBC;
 	serial_out(up, UART_LCR, up->lcr);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 }
 
 static int serial_omap_startup(struct uart_port *port)
@@ -585,7 +585,7 @@ static int serial_omap_startup(struct uart_port *port)
 
 	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	/*
 	 * Clear the FIFO buffers and disable them.
 	 * (they will be reenabled in set_termios())
@@ -641,8 +641,8 @@ static int serial_omap_startup(struct uart_port *port)
 	/* Enable module level wake up */
 	serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
 
-	pm_runtime_mark_last_busy(&up->pdev->dev);
-	pm_runtime_put_autosuspend(&up->pdev->dev);
+	pm_runtime_mark_last_busy(up->dev);
+	pm_runtime_put_autosuspend(up->dev);
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -654,7 +654,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 
 	dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	/*
 	 * Disable interrupts from this port
 	 */
@@ -689,7 +689,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 		up->uart_dma.rx_buf = NULL;
 	}
 
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 	free_irq(up->port.irq, up);
 }
 
@@ -821,7 +821,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Ok, we're now changing the port state. Do it with
 	 * interrupts disabled.
 	 */
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 
 	/*
@@ -970,7 +970,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_omap_configure_xonxoff(up, termios);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
@@ -983,7 +983,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 
 	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -994,14 +994,14 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
 
-	if (!device_may_wakeup(&up->pdev->dev)) {
+	if (!device_may_wakeup(up->dev)) {
 		if (!state)
-			pm_runtime_forbid(&up->pdev->dev);
+			pm_runtime_forbid(up->dev);
 		else
-			pm_runtime_allow(&up->pdev->dev);
+			pm_runtime_allow(up->dev);
 	}
 
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
@@ -1080,10 +1080,10 @@ static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	wait_for_xmitr(up);
 	serial_out(up, UART_TX, ch);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 }
 
 static int serial_omap_poll_get_char(struct uart_port *port)
@@ -1091,13 +1091,13 @@ static int serial_omap_poll_get_char(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned int status;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 	status = serial_in(up, UART_LSR);
 	if (!(status & UART_LSR_DR))
 		return NO_POLL_CHAR;
 
 	status = serial_in(up, UART_RX);
-	pm_runtime_put(&up->pdev->dev);
+	pm_runtime_put(up->dev);
 	return status;
 }
 
@@ -1126,7 +1126,7 @@ serial_omap_console_write(struct console *co, const char *s,
 	unsigned int ier;
 	int locked = 1;
 
-	pm_runtime_get_sync(&up->pdev->dev);
+	pm_runtime_get_sync(up->dev);
 
 	local_irq_save(flags);
 	if (up->port.sysrq)
@@ -1160,8 +1160,8 @@ serial_omap_console_write(struct console *co, const char *s,
 	if (up->msr_saved_flags)
 		check_modem_status(up);
 
-	pm_runtime_mark_last_busy(&up->pdev->dev);
-	pm_runtime_put_autosuspend(&up->pdev->dev);
+	pm_runtime_mark_last_busy(up->dev);
+	pm_runtime_put_autosuspend(up->dev);
 	if (locked)
 		spin_unlock(&up->port.lock);
 	local_irq_restore(flags);
@@ -1323,7 +1323,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
 	int ret = 0;
 
 	if (up->uart_dma.rx_dma_channel == -1) {
-		pm_runtime_get_sync(&up->pdev->dev);
+		pm_runtime_get_sync(up->dev);
 		ret = omap_request_dma(up->uart_dma.uart_dma_rx,
 				"UART Rx DMA",
 				(void *)uart_rx_dma_callback, up,
@@ -1435,7 +1435,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
 		minor = (mvr & OMAP_UART_MVR_MIN_MASK);
 		break;
 	default:
-		dev_warn(&up->pdev->dev,
+		dev_warn(up->dev,
 			"Unknown %s revision, defaulting to highest\n",
 			up->name);
 		/* highest possible revision */
@@ -1535,7 +1535,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 		up->DTR_gpio = -EINVAL;
 	up->DTR_active = 0;
 
-	up->pdev = pdev;
+	up->dev = &pdev->dev;
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
 	up->port.iotype = UPIO_MEM;
@@ -1632,7 +1632,7 @@ static int serial_omap_remove(struct platform_device *dev)
 	struct uart_omap_port *up = platform_get_drvdata(dev);
 
 	if (up) {
-		pm_runtime_disable(&up->pdev->dev);
+		pm_runtime_disable(up->dev);
 		uart_remove_one_port(&serial_omap_reg, &up->port);
 		pm_qos_remove_request(&up->pm_qos_request);
 	}
@@ -1667,7 +1667,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
 		timeout--;
 		if (!timeout) {
 			/* Should *never* happen. we warn and carry on */
-			dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+			dev_crit(up->dev, "Errata i202: timedout %x\n",
 						serial_in(up, UART_LSR));
 			break;
 		}