Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 44 insertions, 34 deletions

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 6f99c99..4d7b562 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -413,7 +413,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
 static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 {
 	mutex_lock(&tty->termios_mutex);
-	tty->termios->c_line = num;
+	tty->termios.c_line = num;
 	mutex_unlock(&tty->termios_mutex);
 }
 
@@ -568,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	if (IS_ERR(new_ldisc))
 		return PTR_ERR(new_ldisc);
 
-	tty_lock();
+	tty_lock(tty);
 	/*
 	 *	We need to look at the tty locking here for pty/tty pairs
 	 *	when both sides try to change in parallel.
@@ -582,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	 */
 
 	if (tty->ldisc->ops->num == ldisc) {
-		tty_unlock();
+		tty_unlock(tty);
 		tty_ldisc_put(new_ldisc);
 		return 0;
 	}
 
-	tty_unlock();
+	tty_unlock(tty);
 	/*
 	 *	Problem: What do we do if this blocks ?
 	 *	We could deadlock here
@@ -595,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_wait_until_sent(tty, 0);
 
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/*
@@ -605,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
 		mutex_unlock(&tty->ldisc_mutex);
-		tty_unlock();
+		tty_unlock(tty);
 		wait_event(tty_ldisc_wait,
 			test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
-		tty_lock();
+		tty_lock(tty);
 		mutex_lock(&tty->ldisc_mutex);
 	}
 
@@ -623,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	o_ldisc = tty->ldisc;
 
-	tty_unlock();
+	tty_unlock(tty);
 	/*
 	 *	Make sure we don't change while someone holds a
 	 *	reference to the line discipline. The TTY_LDISC bit
@@ -650,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/* handle wait idle failure locked */
@@ -665,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
 		mutex_unlock(&tty->ldisc_mutex);
 		tty_ldisc_put(new_ldisc);
-		tty_unlock();
+		tty_unlock(tty);
 		return -EIO;
 	}
 
@@ -708,7 +708,7 @@ enable:
 	if (o_work)
 		schedule_work(&o_tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
-	tty_unlock();
+	tty_unlock(tty);
 	return retval;
 }
 
@@ -722,9 +722,9 @@ enable:
 static void tty_reset_termios(struct tty_struct *tty)
 {
 	mutex_lock(&tty->termios_mutex);
-	*tty->termios = tty->driver->init_termios;
-	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
-	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+	tty->termios = tty->driver->init_termios;
+	tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+	tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
 	mutex_unlock(&tty->termios_mutex);
 }
 
@@ -816,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 * need to wait for another function taking the BTM
 	 */
 	clear_bit(TTY_LDISC, &tty->flags);
-	tty_unlock();
+	tty_unlock(tty);
 	cancel_work_sync(&tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 retry:
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/* At this point we have a closed ldisc and we want to
@@ -831,7 +831,7 @@ retry:
 		if (atomic_read(&tty->ldisc->users) != 1) {
 			char cur_n[TASK_COMM_LEN], tty_n[64];
 			long timeout = 3 * HZ;
-			tty_unlock();
+			tty_unlock(tty);
 
 			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
 				timeout = MAX_SCHEDULE_TIMEOUT;
@@ -846,7 +846,7 @@ retry:
 
 		if (reset == 0) {
 
-			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+			if (!tty_ldisc_reinit(tty, tty->termios.c_line))
 				err = tty_ldisc_open(tty, tty->ldisc);
 			else
 				err = 1;
@@ -894,6 +894,23 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 	tty_ldisc_enable(tty);
 	return 0;
 }
+
+static void tty_ldisc_kill(struct tty_struct *tty)
+{
+	mutex_lock(&tty->ldisc_mutex);
+	/*
+	 * Now kill off the ldisc
+	 */
+	tty_ldisc_close(tty, tty->ldisc);
+	tty_ldisc_put(tty->ldisc);
+	/* Force an oops if we mess this up */
+	tty->ldisc = NULL;
+
+	/* Ensure the next open requests the N_TTY ldisc */
+	tty_set_termios_ldisc(tty, N_TTY);
+	mutex_unlock(&tty->ldisc_mutex);
+}
+
 /**
  *	tty_ldisc_release		-	release line discipline
  *	@tty: tty being shut down
@@ -912,28 +929,21 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	 * race with the set_ldisc code path.
 	 */
 
-	tty_unlock();
+	tty_lock_pair(tty, o_tty);
 	tty_ldisc_halt(tty);
 	tty_ldisc_flush_works(tty);
-	tty_lock();
-
-	mutex_lock(&tty->ldisc_mutex);
-	/*
-	 * Now kill off the ldisc
-	 */
-	tty_ldisc_close(tty, tty->ldisc);
-	tty_ldisc_put(tty->ldisc);
-	/* Force an oops if we mess this up */
-	tty->ldisc = NULL;
-
-	/* Ensure the next open requests the N_TTY ldisc */
-	tty_set_termios_ldisc(tty, N_TTY);
-	mutex_unlock(&tty->ldisc_mutex);
+	if (o_tty) {
+		tty_ldisc_halt(o_tty);
+		tty_ldisc_flush_works(o_tty);
+	}
 
 	/* This will need doing differently if we need to lock */
+	tty_ldisc_kill(tty);
+
 	if (o_tty)
-		tty_ldisc_release(o_tty, NULL);
+		tty_ldisc_kill(o_tty);
 
+	tty_unlock_pair(tty, o_tty);
 	/* And the memory resources remaining (buffers, termios) will be
 	   disposed of when the kref hits zero */
 }