Merge branch 'master' into next

5 files changed, 187 insertions, 155 deletions

diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 8aa1955..1da73ec 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -44,17 +44,6 @@ config UIO_PDRV_GENIRQ
 
 	  If you don't know what to do here, say N.
 
-config UIO_SMX
-	tristate "SMX cryptengine UIO interface"
-	help
-	  Userspace IO interface to the Cryptography engine found on the
-	  Nias Digital SMX boards.  These will be available from Q4 2008
-	  from http://www.niasdigital.com.  The userspace part of this
-	  driver will be released under the GPL at the same time as the
-	  hardware and will be able to be downloaded from the same site.
-
-	  If you compile this as a module, it will be called uio_smx.
-
 config UIO_AEC
 	tristate "AEC video timestamp device"
 	depends on PCI
@@ -74,6 +63,7 @@ config UIO_AEC
 
 config UIO_SERCOS3
 	tristate "Automata Sercos III PCI card driver"
+	depends on PCI
 	help
 	  Userspace I/O interface for the Sercos III PCI card from
 	  Automata GmbH. The userspace part of this driver will be
@@ -87,11 +77,21 @@ config UIO_SERCOS3
 config UIO_PCI_GENERIC
 	tristate "Generic driver for PCI 2.3 and PCI Express cards"
 	depends on PCI
-	default n
 	help
 	  Generic driver that you can bind, dynamically, to any
 	  PCI 2.3 compliant and PCI Express card. It is useful,
 	  primarily, for virtualization scenarios.
 	  If you compile this as a module, it will be called uio_pci_generic.
 
+config UIO_NETX
+	tristate "Hilscher NetX Card driver"
+	depends on PCI
+	help
+	  Driver for Hilscher NetX based fieldbus cards (cifX, comX).
+	  This driver requires a userspace component that comes with the card
+	  or is available from Hilscher (http://www.hilscher.com).
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called uio_netx.
+
 endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 73b2e75..18fd818 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
 obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
-obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
 obj-$(CONFIG_UIO_AEC)	+= uio_aec.o
 obj-$(CONFIG_UIO_SERCOS3)	+= uio_sercos3.o
 obj-$(CONFIG_UIO_PCI_GENERIC)	+= uio_pci_generic.o
+obj-$(CONFIG_UIO_NETX)	+= uio_netx.o
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e941367..4de382a 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(mem, buf);
 }
 
-static struct sysfs_ops map_sysfs_ops = {
+static const struct sysfs_ops map_sysfs_ops = {
 	.show = map_type_show,
 };
 
@@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr,
 	return entry->show(port, buf);
 }
 
-static struct sysfs_ops portio_sysfs_ops = {
+static const struct sysfs_ops portio_sysfs_ops = {
 	.show = portio_type_show,
 };
 
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
new file mode 100644
index 0000000..afbf0bd
--- /dev/null
+++ b/drivers/uio/uio_netx.c
@@ -0,0 +1,172 @@
+/*
+ * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
+ * See http://www.hilscher.com for details.
+ *
+ * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008 Manuel Traut <manut@linutronix.de>
+ *
+ * Licensed under GPL version 2 only.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/uio_driver.h>
+
+#define PCI_VENDOR_ID_HILSCHER		0x15CF
+#define PCI_DEVICE_ID_HILSCHER_NETX	0x0000
+#define PCI_SUBDEVICE_ID_NXSB_PCA	0x3235
+#define PCI_SUBDEVICE_ID_NXPCA		0x3335
+
+#define DPM_HOST_INT_EN0	0xfff0
+#define DPM_HOST_INT_STAT0	0xffe0
+
+#define DPM_HOST_INT_MASK	0xe600ffff
+#define DPM_HOST_INT_GLOBAL_EN	0x80000000
+
+static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
+{
+	void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_EN0;
+	void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+					+ DPM_HOST_INT_STAT0;
+
+	/* Is one of our interrupts enabled and active ? */
+	if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
+		& DPM_HOST_INT_MASK))
+		return IRQ_NONE;
+
+	/* Disable interrupt */
+	iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
+		int_enable_reg);
+	return IRQ_HANDLED;
+}
+
+static int __devinit netx_pci_probe(struct pci_dev *dev,
+					const struct pci_device_id *id)
+{
+	struct uio_info *info;
+	int bar;
+
+	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	if (pci_enable_device(dev))
+		goto out_free;
+
+	if (pci_request_regions(dev, "netx"))
+		goto out_disable;
+
+	switch (id->device) {
+	case PCI_DEVICE_ID_HILSCHER_NETX:
+		bar = 0;
+		info->name = "netx";
+		break;
+	default:
+		bar = 2;
+		info->name = "netx_plx";
+	}
+
+	/* BAR0 or 2 points to the card's dual port memory */
+	info->mem[0].addr = pci_resource_start(dev, bar);
+	if (!info->mem[0].addr)
+		goto out_release;
+	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
+						pci_resource_len(dev, bar));
+
+	if (!info->mem[0].internal_addr)
+			goto out_release;
+
+	info->mem[0].size = pci_resource_len(dev, bar);
+	info->mem[0].memtype = UIO_MEM_PHYS;
+	info->irq = dev->irq;
+	info->irq_flags = IRQF_SHARED;
+	info->handler = netx_handler;
+	info->version = "0.0.1";
+
+	/* Make sure all interrupts are disabled */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+
+	if (uio_register_device(&dev->dev, info))
+		goto out_unmap;
+
+	pci_set_drvdata(dev, info);
+	dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
+				info->name);
+
+	return 0;
+
+out_unmap:
+	iounmap(info->mem[0].internal_addr);
+out_release:
+	pci_release_regions(dev);
+out_disable:
+	pci_disable_device(dev);
+out_free:
+	kfree(info);
+	return -ENODEV;
+}
+
+static void netx_pci_remove(struct pci_dev *dev)
+{
+	struct uio_info *info = pci_get_drvdata(dev);
+
+	/* Disable all interrupts */
+	iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
+	uio_unregister_device(info);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	iounmap(info->mem[0].internal_addr);
+
+	kfree(info);
+}
+
+static struct pci_device_id netx_pci_ids[] = {
+	{
+		.vendor =	PCI_VENDOR_ID_HILSCHER,
+		.device =	PCI_DEVICE_ID_HILSCHER_NETX,
+		.subvendor =	0,
+		.subdevice =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXSB_PCA,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_PLX,
+		.device =	PCI_DEVICE_ID_PLX_9030,
+		.subvendor =	PCI_VENDOR_ID_PLX,
+		.subdevice =	PCI_SUBDEVICE_ID_NXPCA,
+	},
+	{ 0, }
+};
+
+static struct pci_driver netx_pci_driver = {
+	.name = "netx",
+	.id_table = netx_pci_ids,
+	.probe = netx_pci_probe,
+	.remove = netx_pci_remove,
+};
+
+static int __init netx_init_module(void)
+{
+	return pci_register_driver(&netx_pci_driver);
+}
+
+static void __exit netx_exit_module(void)
+{
+	pci_unregister_driver(&netx_pci_driver);
+}
+
+module_init(netx_init_module);
+module_exit(netx_exit_module);
+
+MODULE_DEVICE_TABLE(pci, netx_pci_ids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hans J. Koch, Manuel Traut");
diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
deleted file mode 100644
index 44054a6..0000000
--- a/drivers/uio/uio_smx.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * UIO SMX Cryptengine driver.
- *
- * (C) 2008 Nias Digital P/L <bn@niasdigital.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/io.h>
-
-#define DRV_NAME "smx-ce"
-#define DRV_VERSION "0.03"
-
-#define SMX_CSR  0x00000000
-#define SMX_EnD  0x00000001
-#define SMX_RUN  0x00000002
-#define SMX_DRDY 0x00000004
-#define SMX_ERR  0x00000008
-
-static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
-{
-	void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
-
-	u32 status = ioread32(csr);
-
-	if (!(status & SMX_DRDY))
-		return IRQ_NONE;
-
-	/* Disable interrupt */
-	iowrite32(status & ~SMX_DRDY, csr);
-	return IRQ_HANDLED;
-}
-
-static int __devinit smx_ce_probe(struct platform_device *dev)
-{
-
-	int ret = -ENODEV;
-	struct uio_info *info;
-	struct resource *regs;
-
-	info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(&dev->dev, "No memory resource specified\n");
-		goto out_free;
-	}
-
-	info->mem[0].addr = regs->start;
-	if (!info->mem[0].addr) {
-		dev_err(&dev->dev, "Invalid memory resource\n");
-		goto out_free;
-	}
-
-	info->mem[0].size = regs->end - regs->start + 1;
-	info->mem[0].internal_addr = ioremap(regs->start, info->mem[0].size);
-
-	if (!info->mem[0].internal_addr) {
-		dev_err(&dev->dev, "Can't remap memory address range\n");
-		goto out_free;
-	}
-
-	info->mem[0].memtype = UIO_MEM_PHYS;
-
-	info->name = "smx-ce";
-	info->version = "0.03";
-
-	info->irq = platform_get_irq(dev, 0);
-	if (info->irq < 0) {
-		ret = info->irq;
-		dev_err(&dev->dev, "No (or invalid) IRQ resource specified\n");
-		goto out_unmap;
-	}
-
-	info->irq_flags = IRQF_SHARED;
-	info->handler = smx_handler;
-
-	platform_set_drvdata(dev, info);
-
-	ret = uio_register_device(&dev->dev, info);
-
-	if (ret)
-		goto out_unmap;
-
-	return 0;
-
-out_unmap:
-	iounmap(info->mem[0].internal_addr);
-out_free:
-	kfree(info);
-
-	return ret;
-}
-
-static int __devexit smx_ce_remove(struct platform_device *dev)
-{
-	struct uio_info *info = platform_get_drvdata(dev);
-
-	uio_unregister_device(info);
-	platform_set_drvdata(dev, NULL);
-	iounmap(info->mem[0].internal_addr);
-
-	kfree(info);
-
-	return 0;
-}
-
-static struct platform_driver smx_ce_driver = {
-	.probe		= smx_ce_probe,
-	.remove		= __devexit_p(smx_ce_remove),
-	.driver		= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init smx_ce_init_module(void)
-{
-	return platform_driver_register(&smx_ce_driver);
-}
-module_init(smx_ce_init_module);
-
-static void __exit smx_ce_exit_module(void)
-{
-	platform_driver_unregister(&smx_ce_driver);
-}
-module_exit(smx_ce_exit_module);
-
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Ben Nizette <bn@niasdigital.com>");