Merge tag 'for-usb-2013-08-15-step-1' into for-usb-next

xhci: Step 1 to fix usb-linus and usb-next.

Hi Greg,

This is the first of three steps to fix your usb-linus and usb-next
trees.  As I mentioned, commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66
"USB: handle LPM errors during device suspend correctly" was incorrectly
added to usb-next when it should have been added to usb-linus and marked
for stable.

Two port power off bug fixes touch the same code that patch touches, but
it's not easy to simply move commit 4fae6f0f patch to usb-linus because
commit 28e861658e23ca94692f98e245d254c75c8088a7 "USB: refactor code for
enabling/disabling remote wakeup" also touched those code sections.

I propose a two step process to fix this:

1. Pull these four patches into usb-linus.

2. Revert commit 28e861658e23ca94692f98e245d254c75c8088a7 from usb-next.
   Merge usb-linus into usb-next, and resolve the conflicts.

I will be sending pull requests for these steps.

This pull request is step one, and contains the backported version of
commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66, the two port power off
fixes, and an unrelated xhci-plat bug fix.

Sarah Sharp

Resolved conflicts:
	drivers/usb/core/hub.c

3 files changed, 13 insertions, 20 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5d6d28a..175179e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3054,19 +3054,9 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 	}
 
-	/*
-	 * Check whether current status meets the requirement of
-	 * usb port power off mechanism
-	 */
 	if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled) {
-		enum pm_qos_flags_status pm_qos_stat;
-
-		pm_qos_stat = dev_pm_qos_flags(&port_dev->dev,
-				PM_QOS_FLAG_NO_POWER_OFF);
-		if (pm_qos_stat != PM_QOS_FLAGS_ALL) {
-			pm_runtime_put_sync(&port_dev->dev);
-			port_dev->did_runtime_put = true;
-		}
+		pm_runtime_put_sync(&port_dev->dev);
+		port_dev->did_runtime_put = true;
 	}
 
 	usb_mark_last_busy(hub->hdev);
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index d6b0fad..9909911 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -89,22 +89,19 @@ static int usb_port_runtime_resume(struct device *dev)
 	retval = usb_hub_set_port_power(hdev, hub, port1, true);
 	if (port_dev->child && !retval) {
 		/*
-		 * Wait for usb hub port to be reconnected in order to make
-		 * the resume procedure successful.
+		 * Attempt to wait for usb hub port to be reconnected in order
+		 * to make the resume procedure successful.  The device may have
+		 * disconnected while the port was powered off, so ignore the
+		 * return status.
 		 */
 		retval = hub_port_debounce_be_connected(hub, port1);
-		if (retval < 0) {
+		if (retval < 0)
 			dev_dbg(&port_dev->dev, "can't get reconnection after setting port  power on, status %d\n",
 					retval);
-			goto out;
-		}
 		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
-
-		/* Set return value to 0 if debounce successful */
 		retval = 0;
 	}
 
-out:
 	clear_bit(port1, hub->busy_bits);
 	usb_autopm_put_interface(intf);
 	return retval;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index a635988..5b44cd4 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -78,6 +78,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* CarrolTouch 4000U */
+	{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* CarrolTouch 4500U */
+	{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Samsung Android phone modem - ID conflict with SPH-I500 */
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },