Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 6 insertions, 19 deletions

diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 32524b63..f1e50a3 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -58,7 +58,6 @@ static const char * const ep_name[] = {
 	"ep-a", "ep-b", "ep-c",
 };
 
-#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
 #ifdef CONFIG_USB_NET2272_DMA
 /*
  * use_dma: the NET2272 can use an external DMA controller.
@@ -341,7 +340,6 @@ net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 	if (!req)
 		return NULL;
 
-	req->req.dma = DMA_ADDR_INVALID;
 	INIT_LIST_HEAD(&req->queue);
 
 	return &req->req;
@@ -913,7 +911,7 @@ net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			}
 		}
 	}
-	if (likely(req != 0))
+	if (likely(req))
 		list_add_tail(&req->queue, &ep->queue);
 
 	if (likely(!list_empty(&ep->queue)))
@@ -1467,7 +1465,6 @@ static int net2272_start(struct usb_gadget *_gadget,
 	dev->softconnect = 1;
 	driver->driver.bus = NULL;
 	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
 
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
@@ -1517,7 +1514,6 @@ static int net2272_stop(struct usb_gadget *_gadget,
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name);
@@ -1549,7 +1545,7 @@ net2272_handle_dma(struct net2272_ep *ep)
 	      | (ep->dev->dma_eot_polarity << EOT_POLARITY)
 	      | (ep->dev->dma_dack_polarity << DACK_POLARITY)
 	      | (ep->dev->dma_dreq_polarity << DREQ_POLARITY)
-	      | ((ep->dma >> 1) << DMA_ENDPOINT_SELECT));
+	      | (ep->dma << DMA_ENDPOINT_SELECT));
 
 	ep->dev->dma_busy = 0;
 
@@ -1622,7 +1618,7 @@ net2272_handle_ep(struct net2272_ep *ep)
 	ep->irqs++;
 
 	dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n",
-		ep->ep.name, stat0, stat1, req ? &req->req : 0);
+		ep->ep.name, stat0, stat1, req ? &req->req : NULL);
 
 	net2272_ep_write(ep, EP_STAT0, stat0 &
 		~((1 << NAK_OUT_PACKETS)
@@ -2216,7 +2212,6 @@ net2272_remove(struct net2272 *dev)
 	free_irq(dev->irq, dev);
 	iounmap(dev->base_addr);
 
-	device_unregister(&dev->gadget.dev);
 	device_remove_file(dev->dev, &dev_attr_registers);
 
 	dev_info(dev->dev, "unbind\n");
@@ -2243,10 +2238,6 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
 	ret->gadget.max_speed = USB_SPEED_HIGH;
 
 	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&ret->gadget.dev, "gadget");
-	ret->gadget.dev.parent = dev;
-	ret->gadget.dev.dma_mask = dev->dma_mask;
-	ret->gadget.dev.release = net2272_gadget_release;
 	ret->gadget.name = driver_name;
 
 	return ret;
@@ -2282,14 +2273,12 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 		dma_mode_string());
 	dev_info(dev->dev, "version: %s\n", driver_vers);
 
-	ret = device_register(&dev->gadget.dev);
-	if (ret)
-		goto err_irq;
 	ret = device_create_file(dev->dev, &dev_attr_registers);
 	if (ret)
-		goto err_dev_reg;
+		goto err_irq;
 
-	ret = usb_add_gadget_udc(dev->dev, &dev->gadget);
+	ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget,
+			net2272_gadget_release);
 	if (ret)
 		goto err_add_udc;
 
@@ -2297,8 +2286,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 
 err_add_udc:
 	device_remove_file(dev->dev, &dev_attr_registers);
- err_dev_reg:
-	device_unregister(&dev->gadget.dev);
  err_irq:
 	free_irq(dev->irq, dev);
  err: