USB: EHCI: use hrtimer for interrupt QH unlink

This patch (as1577) adds hrtimer support for unlinking interrupt QHs
in ehci-hcd.  The current code relies on a fixed delay of either 2 or
55 us, which is not always adequate and in any case is totally bogus.
Thanks to internal caching, the EHCI hardware may continue to access
an interrupt QH for more than a millisecond after it has been unlinked.

In fact, the EHCI spec doesn't say how long to wait before using an
unlinked interrupt QH.  The patch sets the delay to 9 microframes
minimum, which ought to be adequate.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 94 insertions, 28 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 21d6fbc..edcfd2c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -309,6 +309,8 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 
 static void end_unlink_async(struct ehci_hcd *ehci);
 static void ehci_work(struct ehci_hcd *ehci);
+static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
+static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
 
 #include "ehci-timer.c"
 #include "ehci-hub.c"
@@ -1034,7 +1036,7 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		switch (qh->qh_state) {
 		case QH_STATE_LINKED:
 		case QH_STATE_COMPLETING:
-			intr_deschedule (ehci, qh);
+			start_unlink_intr(ehci, qh);
 			break;
 		case QH_STATE_IDLE:
 			qh_completions (ehci, qh);
@@ -1164,7 +1166,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 			if (eptype == USB_ENDPOINT_XFER_BULK)
 				unlink_async(ehci, qh);
 			else
-				intr_deschedule(ehci, qh);
+				start_unlink_intr(ehci, qh);
 		}
 	}
 	spin_unlock_irqrestore(&ehci->lock, flags);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 25329e4..8aa740d 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -302,6 +302,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 	if (ehci->async_unlink)
 		end_unlink_async(ehci);
+	ehci_handle_intr_unlinks(ehci);
 
 	/* allow remote wakeup */
 	mask = INTR_MASK;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 69b1861..eec8446 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -578,12 +578,20 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	unsigned	i;
 	unsigned	period;
 
-	// FIXME:
-	// IF this isn't high speed
-	//   and this qh is active in the current uframe
-	//   (and overlay token SplitXstate is false?)
-	// THEN
-	//   qh->hw_info1 |= cpu_to_hc32(1 << 7 /* "ignore" */);
+	/*
+	 * If qh is for a low/full-speed device, simply unlinking it
+	 * could interfere with an ongoing split transaction.  To unlink
+	 * it safely would require setting the QH_INACTIVATE bit and
+	 * waiting at least one frame, as described in EHCI 4.12.2.5.
+	 *
+	 * We won't bother with any of this.  Instead, we assume that the
+	 * only reason for unlinking an interrupt QH while the current URB
+	 * is still active is to dequeue all the URBs (flush the whole
+	 * endpoint queue).
+	 *
+	 * If rebalancing the periodic schedule is ever implemented, this
+	 * approach will no longer be valid.
+	 */
 
 	/* high bandwidth, or otherwise part of every microframe */
 	if ((period = qh->period) == 0)
@@ -608,12 +616,8 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	qh->qh_next.ptr = NULL;
 }
 
-static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	unsigned		wait;
-	struct ehci_qh_hw	*hw = qh->hw;
-	int			rc;
-
 	/* If the QH isn't linked then there's nothing we can do
 	 * unless we were called during a giveback, in which case
 	 * qh_completions() has to deal with it.
@@ -626,28 +630,45 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	qh_unlink_periodic (ehci, qh);
 
-	/* simple/paranoid:  always delay, expecting the HC needs to read
-	 * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and
-	 * expect khubd to clean up after any CSPLITs we won't issue.
-	 * active high speed queues may need bigger delays...
+	/* Make sure the unlinks are visible before starting the timer */
+	wmb();
+
+	/*
+	 * The EHCI spec doesn't say how long it takes the controller to
+	 * stop accessing an unlinked interrupt QH.  The timer delay is
+	 * 9 uframes; presumably that will be long enough.
 	 */
-	if (list_empty (&qh->qtd_list)
-			|| (cpu_to_hc32(ehci, QH_CMASK)
-					& hw->hw_info2) != 0)
-		wait = 2;
+	qh->unlink_cycle = ehci->intr_unlink_cycle;
+
+	/* New entries go at the end of the intr_unlink list */
+	if (ehci->intr_unlink)
+		ehci->intr_unlink_last->unlink_next = qh;
 	else
-		wait = 55;	/* worst case: 3 * 1024 */
+		ehci->intr_unlink = qh;
+	ehci->intr_unlink_last = qh;
+
+	if (ehci->intr_unlinking)
+		;	/* Avoid recursive calls */
+	else if (ehci->rh_state < EHCI_RH_RUNNING)
+		ehci_handle_intr_unlinks(ehci);
+	else if (ehci->intr_unlink == qh) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true);
+		++ehci->intr_unlink_cycle;
+	}
+}
+
+static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	struct ehci_qh_hw	*hw = qh->hw;
+	int			rc;
 
-	udelay (wait);
 	qh->qh_state = QH_STATE_IDLE;
 	hw->hw_next = EHCI_LIST_END(ehci);
-	wmb ();
 
 	qh_completions(ehci, qh);
 
 	/* reschedule QH iff another request is queued */
-	if (!list_empty(&qh->qtd_list) &&
-			ehci->rh_state == EHCI_RH_RUNNING) {
+	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
 
 		/* An error here likely indicates handshake failure
@@ -2302,7 +2323,7 @@ restart:
 						temp.qh->stamp = ehci->periodic_stamp;
 					if (unlikely(list_empty(&temp.qh->qtd_list) ||
 							temp.qh->needs_rescan))
-						intr_deschedule(ehci, temp.qh);
+						start_unlink_intr(ehci, temp.qh);
 				}
 				break;
 			case Q_TYPE_FSTN:
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index 1e907dd..bd8b591 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -69,6 +69,7 @@ static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit)
 static unsigned event_delays_ns[] = {
 	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_ASS */
 	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_PSS */
+	1125 * NSEC_PER_USEC,	/* EHCI_HRTIMER_UNLINK_INTR */
 	10 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_PERIODIC */
 	15 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_ASYNC */
 };
@@ -192,6 +193,38 @@ static void ehci_disable_PSE(struct ehci_hcd *ehci)
 }
 
 
+/* Handle unlinked interrupt QHs once they are gone from the hardware */
+static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci)
+{
+	bool		stopped = (ehci->rh_state < EHCI_RH_RUNNING);
+
+	/*
+	 * Process all the QHs on the intr_unlink list that were added
+	 * before the current unlink cycle began.  The list is in
+	 * temporal order, so stop when we reach the first entry in the
+	 * current cycle.  But if the root hub isn't running then
+	 * process all the QHs on the list.
+	 */
+	ehci->intr_unlinking = true;
+	while (ehci->intr_unlink) {
+		struct ehci_qh	*qh = ehci->intr_unlink;
+
+		if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle)
+			break;
+		ehci->intr_unlink = qh->unlink_next;
+		qh->unlink_next = NULL;
+		end_unlink_intr(ehci, qh);
+	}
+
+	/* Handle remaining entries later */
+	if (ehci->intr_unlink) {
+		ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true);
+		++ehci->intr_unlink_cycle;
+	}
+	ehci->intr_unlinking = false;
+}
+
+
 /*
  * Handler functions for the hrtimer event types.
  * Keep this array in the same order as the event types indexed by
@@ -200,6 +233,7 @@ static void ehci_disable_PSE(struct ehci_hcd *ehci)
 static void (*event_handlers[])(struct ehci_hcd *) = {
 	ehci_poll_ASS,			/* EHCI_HRTIMER_POLL_ASS */
 	ehci_poll_PSS,			/* EHCI_HRTIMER_POLL_PSS */
+	ehci_handle_intr_unlinks,	/* EHCI_HRTIMER_UNLINK_INTR */
 	ehci_disable_PSE,		/* EHCI_HRTIMER_DISABLE_PERIODIC */
 	ehci_disable_ASE,		/* EHCI_HRTIMER_DISABLE_ASYNC */
 };
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bf06bbb..f36f1f8 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -81,6 +81,7 @@ enum ehci_rh_state {
 enum ehci_hrtimer_event {
 	EHCI_HRTIMER_POLL_ASS,		/* Poll for async schedule off */
 	EHCI_HRTIMER_POLL_PSS,		/* Poll for periodic schedule off */
+	EHCI_HRTIMER_UNLINK_INTR,	/* Wait for interrupt QH unlink */
 	EHCI_HRTIMER_DISABLE_PERIODIC,	/* Wait to disable periodic sched */
 	EHCI_HRTIMER_DISABLE_ASYNC,	/* Wait to disable async sched */
 	EHCI_HRTIMER_NUM_EVENTS		/* Must come last */
@@ -106,13 +107,16 @@ struct ehci_hcd {			/* one per controller */
 	spinlock_t		lock;
 	enum ehci_rh_state	rh_state;
 
+	/* general schedule support */
+	unsigned		scanning:1;
+	bool			intr_unlinking:1;
+
 	/* async schedule support */
 	struct ehci_qh		*async;
 	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*async_unlink;
 	struct ehci_qh		*async_unlink_last;
 	struct ehci_qh		*qh_scan_next;
-	unsigned		scanning : 1;
 	unsigned		async_count;	/* async activity count */
 
 	/* periodic schedule support */
@@ -123,6 +127,9 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		i_thresh;	/* uframes HC might cache */
 
 	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
+	struct ehci_qh		*intr_unlink;
+	struct ehci_qh		*intr_unlink_last;
+	unsigned		intr_unlink_cycle;
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_count;	/* periodic activity count */
 	unsigned		uframe_periodic_max; /* max periodic time per uframe */
@@ -385,6 +392,7 @@ struct ehci_qh {
 	struct ehci_qh		*unlink_next;	/* next on unlink list */
 
 	unsigned long		unlink_time;
+	unsigned		unlink_cycle;
 	unsigned		stamp;
 
 	u8			needs_rescan;	/* Dequeue during giveback */