Merge tag 'usb-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB fixes and new device ids for 3.12-rc6

  The largest change here is a bunch of new device ids for the option
  USB serial driver for new Huawei devices.  Other than that, just some
  small bug fixes for issues that people have reported (run-time and
  build-time), nothing major"

* tag 'usb-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: usb_phy_gen: refine conditional declaration of usb_nop_xceiv_register
  usb: misc: usb3503: Fix compile error due to incorrect regmap depedency
  usb/chipidea: fix oops on memory allocation failure
  usb-storage: add quirk for mandatory READ_CAPACITY_16
  usb: serial: option: blacklist Olivetti Olicard200
  USB: quirks: add touchscreen that is dazzeled by remote wakeup
  Revert "usb: musb: gadget: fix otg active status flag"
  USB: quirks.c: add one device that cannot deal with suspension
  USB: serial: option: add support for Inovia SEW858 device
  USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.
  USB: support new huawei devices in option.c
  usb: musb: start musb on the udc side, too
  xhci: Fix spurious wakeups after S5 on Haswell
  xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers
  xhci: quirk for extra long delay for S4
  xhci: Don't enable/disable RWE on bus suspend/resume.

4 files changed, 50 insertions, 46 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 18e877f..cd70cc8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -922,6 +922,52 @@ static void musb_generic_disable(struct musb *musb)
 }
 
 /*
+ * Program the HDRC to start (enable interrupts, dma, etc.).
+ */
+void musb_start(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+	u8              devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+			| MUSB_POWER_HSENAB
+			/* ENSUSPEND wedges tusb */
+			/* | MUSB_POWER_ENSUSPEND */
+		   );
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	/* session started after:
+	 * (a) ID-grounded irq, host mode;
+	 * (b) vbus present/connect IRQ, peripheral mode;
+	 * (c) peripheral initiates, using SRP
+	 */
+	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+		musb->is_active = 1;
+	} else {
+		devctl |= MUSB_DEVCTL_SESSION;
+	}
+
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+/*
  * Make the HDRC stop (disable interrupts, etc.);
  * reversible by musb_start
  * called on gadget driver unregister
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 65f3917..1c5bf75 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -503,6 +503,7 @@ static inline void musb_configure_ep0(struct musb *musb)
 extern const char musb_driver_name[];
 
 extern void musb_stop(struct musb *musb);
+extern void musb_start(struct musb *musb);
 
 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
 extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b19ed21..3671898 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1853,11 +1853,14 @@ static int musb_gadget_start(struct usb_gadget *g,
 	musb->gadget_driver = driver;
 
 	spin_lock_irqsave(&musb->lock, flags);
+	musb->is_active = 1;
 
 	otg_set_peripheral(otg, &musb->g);
 	musb->xceiv->state = OTG_STATE_B_IDLE;
 	spin_unlock_irqrestore(&musb->lock, flags);
 
+	musb_start(musb);
+
 	/* REVISIT:  funcall to other code, which also
 	 * handles power budgeting ... this way also
 	 * ensures HdrcStart is indirectly called.
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index a523950..d1d6b83 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -44,52 +44,6 @@
 
 #include "musb_core.h"
 
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-static void musb_start(struct musb *musb)
-{
-	void __iomem	*regs = musb->mregs;
-	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
-
-	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
-	musb_writeb(regs, MUSB_TESTMODE, 0);
-
-	/* put into basic highspeed mode and start session */
-	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
-						| MUSB_POWER_HSENAB
-						/* ENSUSPEND wedges tusb */
-						/* | MUSB_POWER_ENSUSPEND */
-						);
-
-	musb->is_active = 0;
-	devctl = musb_readb(regs, MUSB_DEVCTL);
-	devctl &= ~MUSB_DEVCTL_SESSION;
-
-	/* session started after:
-	 * (a) ID-grounded irq, host mode;
-	 * (b) vbus present/connect IRQ, peripheral mode;
-	 * (c) peripheral initiates, using SRP
-	 */
-	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
-	    (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
-		musb->is_active = 1;
-	} else {
-		devctl |= MUSB_DEVCTL_SESSION;
-	}
-
-	musb_platform_enable(musb);
-	musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
 static void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
 	struct usb_otg	*otg = musb->xceiv->otg;