diff options
author | David S. Miller <davem@davemloft.net> | 2013-08-04 04:36:46 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-08-04 04:36:46 (GMT) |
commit | 0e76a3a587fc7abda2badf249053b427baad255e (patch) | |
tree | 646a1da67dc25654552028225ca4b7a0a8043cc9 /drivers/usb/serial/mos7840.c | |
parent | fba3679d34511c42bf452e89dda457a1219eb43a (diff) | |
parent | 72a67a94bcba71a5fddd6b3596a20604d2b5dcd6 (diff) | |
download | linux-fsl-qoriq-0e76a3a587fc7abda2badf249053b427baad255e.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge net into net-next to setup some infrastructure Eric
Dumazet needs for usbnet changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/usb/serial/mos7840.c')
-rw-r--r-- | drivers/usb/serial/mos7840.c | 175 |
1 files changed, 104 insertions, 71 deletions
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 0a818b2..d953d67 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -183,7 +183,10 @@ #define LED_ON_MS 500 #define LED_OFF_MS 500 -static int device_type; +enum mos7840_flag { + MOS7840_FLAG_CTRL_BUSY, + MOS7840_FLAG_LED_BUSY, +}; static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, @@ -238,9 +241,12 @@ struct moschip_port { /* For device(s) with LED indicator */ bool has_led; - bool led_flag; struct timer_list led_timer1; /* Timer for LED on */ struct timer_list led_timer2; /* Timer for LED off */ + struct urb *led_urb; + struct usb_ctrlrequest *led_dr; + + unsigned long flags; }; /* @@ -460,10 +466,10 @@ static void mos7840_control_callback(struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); - return; + goto out; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - return; + goto out; } dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); @@ -476,6 +482,8 @@ static void mos7840_control_callback(struct urb *urb) mos7840_handle_new_msr(mos7840_port, regval); else if (mos7840_port->MsrLsr == 1) mos7840_handle_new_lsr(mos7840_port, regval); +out: + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags); } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, @@ -486,6 +494,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, unsigned char *buffer = mcs->ctrl_buf; int ret; + if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags)) + return -EBUSY; + dr->bRequestType = MCS_RD_RTYPE; dr->bRequest = MCS_RDREQ; dr->wValue = cpu_to_le16(Wval); /* 0 */ @@ -497,6 +508,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, mos7840_control_callback, mcs); mcs->control_urb->transfer_buffer_length = 2; ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + if (ret) + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags); + return ret; } @@ -523,7 +537,7 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, __u16 reg) { struct usb_device *dev = mcs->port->serial->dev; - struct usb_ctrlrequest *dr = mcs->dr; + struct usb_ctrlrequest *dr = mcs->led_dr; dr->bRequestType = MCS_WR_RTYPE; dr->bRequest = MCS_WRREQ; @@ -531,10 +545,10 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, dr->wIndex = cpu_to_le16(reg); dr->wLength = cpu_to_le16(0); - usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0), + usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0), (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL); - usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + usb_submit_urb(mcs->led_urb, GFP_ATOMIC); } static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg, @@ -560,7 +574,19 @@ static void mos7840_led_flag_off(unsigned long arg) { struct moschip_port *mcs = (struct moschip_port *) arg; - mcs->led_flag = false; + clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags); +} + +static void mos7840_led_activity(struct usb_serial_port *port) +{ + struct moschip_port *mos7840_port = usb_get_serial_port_data(port); + + if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags)) + return; + + mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER); + mod_timer(&mos7840_port->led_timer1, + jiffies + msecs_to_jiffies(LED_ON_MS)); } /***************************************************************************** @@ -758,14 +784,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) return; } - /* Turn on LED */ - if (mos7840_port->has_led && !mos7840_port->led_flag) { - mos7840_port->led_flag = true; - mos7840_set_led_async(mos7840_port, 0x0301, - MODEM_CONTROL_REGISTER); - mod_timer(&mos7840_port->led_timer1, - jiffies + msecs_to_jiffies(LED_ON_MS)); - } + if (mos7840_port->has_led) + mos7840_led_activity(port); mos7840_port->read_urb_busy = true; retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); @@ -816,18 +836,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) /************************************************************************/ /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ /************************************************************************/ -#ifdef MCSSerialProbe -static int mos7840_serial_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - - /*need to implement the mode_reg reading and updating\ - structures usb_serial_ device_type\ - (i.e num_ports, num_bulkin,bulkout etc) */ - /* Also we can update the changes attach */ - return 1; -} -#endif /***************************************************************************** * mos7840_open @@ -905,20 +913,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Spreg failed\n"); - return -1; + goto err; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } /* End of block to be checked */ @@ -927,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Controlreg failed\n"); - return -1; + goto err; } Data |= 0x08; /* Driver done bit */ Data |= 0x20; /* rx_disable */ @@ -935,7 +943,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) mos7840_port->ControlRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Controlreg failed\n"); - return -1; + goto err; } /* do register settings here */ /* Set all regs to the device default values. */ @@ -946,21 +954,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "disabling interrupts failed\n"); - return -1; + goto err; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0x03; @@ -1103,6 +1111,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* mos7840_change_port_settings(mos7840_port,old_termios); */ return 0; +err: + for (j = 0; j < NUM_URBS; ++j) { + urb = mos7840_port->write_urb_pool[j]; + if (!urb) + continue; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + return status; } /***************************************************************************** @@ -1445,13 +1462,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, data1 = urb->transfer_buffer; dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); - /* Turn on LED */ - if (mos7840_port->has_led && !mos7840_port->led_flag) { - mos7840_port->led_flag = true; - mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301); - mod_timer(&mos7840_port->led_timer1, - jiffies + msecs_to_jiffies(LED_ON_MS)); - } + if (mos7840_port->has_led) + mos7840_led_activity(port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); @@ -2178,38 +2190,48 @@ static int mos7810_check(struct usb_serial *serial) return 0; } -static int mos7840_calc_num_ports(struct usb_serial *serial) +static int mos7840_probe(struct usb_serial *serial, + const struct usb_device_id *id) { - __u16 data = 0x00; + u16 product = serial->dev->descriptor.idProduct; u8 *buf; - int mos7840_num_ports; + int device_type; + + if (product == MOSCHIP_DEVICE_ID_7810 || + product == MOSCHIP_DEVICE_ID_7820) { + device_type = product; + goto out; + } buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); - if (buf) { - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + if (!buf) + return -ENOMEM; + + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); - data = *buf; - kfree(buf); - } - if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || - serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { - device_type = serial->dev->descriptor.idProduct; - } else { - /* For a MCS7840 device GPIO0 must be set to 1 */ - if ((data & 0x01) == 1) - device_type = MOSCHIP_DEVICE_ID_7840; - else if (mos7810_check(serial)) - device_type = MOSCHIP_DEVICE_ID_7810; - else - device_type = MOSCHIP_DEVICE_ID_7820; - } + /* For a MCS7840 device GPIO0 must be set to 1 */ + if (buf[0] & 0x01) + device_type = MOSCHIP_DEVICE_ID_7840; + else if (mos7810_check(serial)) + device_type = MOSCHIP_DEVICE_ID_7810; + else + device_type = MOSCHIP_DEVICE_ID_7820; + + kfree(buf); +out: + usb_set_serial_data(serial, (void *)(unsigned long)device_type); + + return 0; +} + +static int mos7840_calc_num_ports(struct usb_serial *serial) +{ + int device_type = (unsigned long)usb_get_serial_data(serial); + int mos7840_num_ports; mos7840_num_ports = (device_type >> 4) & 0x000F; - serial->num_bulk_in = mos7840_num_ports; - serial->num_bulk_out = mos7840_num_ports; - serial->num_ports = mos7840_num_ports; return mos7840_num_ports; } @@ -2217,6 +2239,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; + int device_type = (unsigned long)usb_get_serial_data(serial); struct moschip_port *mos7840_port; int status; int pnum; @@ -2392,6 +2415,14 @@ static int mos7840_port_probe(struct usb_serial_port *port) if (device_type == MOSCHIP_DEVICE_ID_7810) { mos7840_port->has_led = true; + mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr), + GFP_KERNEL); + if (!mos7840_port->led_urb || !mos7840_port->led_dr) { + status = -ENOMEM; + goto error; + } + init_timer(&mos7840_port->led_timer1); mos7840_port->led_timer1.function = mos7840_led_off; mos7840_port->led_timer1.expires = @@ -2404,8 +2435,6 @@ static int mos7840_port_probe(struct usb_serial_port *port) jiffies + msecs_to_jiffies(LED_OFF_MS); mos7840_port->led_timer2.data = (unsigned long)mos7840_port; - mos7840_port->led_flag = false; - /* Turn off LED */ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); } @@ -2427,6 +2456,8 @@ out: } return 0; error: + kfree(mos7840_port->led_dr); + usb_free_urb(mos7840_port->led_urb); kfree(mos7840_port->dr); kfree(mos7840_port->ctrl_buf); usb_free_urb(mos7840_port->control_urb); @@ -2447,6 +2478,10 @@ static int mos7840_port_remove(struct usb_serial_port *port) del_timer_sync(&mos7840_port->led_timer1); del_timer_sync(&mos7840_port->led_timer2); + + usb_kill_urb(mos7840_port->led_urb); + usb_free_urb(mos7840_port->led_urb); + kfree(mos7840_port->led_dr); } usb_kill_urb(mos7840_port->control_urb); usb_free_urb(mos7840_port->control_urb); @@ -2473,9 +2508,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .throttle = mos7840_throttle, .unthrottle = mos7840_unthrottle, .calc_num_ports = mos7840_calc_num_ports, -#ifdef MCSSerialProbe - .probe = mos7840_serial_probe, -#endif + .probe = mos7840_probe, .ioctl = mos7840_ioctl, .set_termios = mos7840_set_termios, .break_ctl = mos7840_break, |