Merge branch 'tip/perf/jump-label-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

19 files changed, 1148 insertions, 369 deletions

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 8a372ba..49a489e 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
 	depends on USB_STORAGE
 	help
 	  Support for certain Datafab CompactFlash readers.
-	  Datafab has a web page at <http://www.datafabusa.com/>.
+	  Datafab has a web page at <http://www.datafab.com/>.
 
 	  If this driver is compiled as a module, it will be named ums-datafab.
 
@@ -172,6 +172,19 @@ config USB_STORAGE_CYPRESS_ATACB
 
 	  If this driver is compiled as a module, it will be named ums-cypress.
 
+config USB_UAS
+	tristate "USB Attached SCSI"
+	depends on USB && SCSI
+	help
+	  The USB Attached SCSI protocol is supported by some USB
+	  storage devices.  It permits higher performance by supporting
+	  multiple outstanding commands.
+
+	  If you don't know whether you have a UAS device, it is safe to
+	  say 'Y' or 'M' here and the kernel will use the right driver.
+
+	  If you compile this driver as a module, it will be named uas.
+
 config USB_LIBUSUAL
 	bool "The shared table of common (or usual) storage devices"
 	depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index ef7e5a8..fcf14cd 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -5,20 +5,21 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-EXTRA_CFLAGS	:= -Idrivers/scsi
+ccflags-y := -Idrivers/scsi
 
+obj-$(CONFIG_USB_UAS)		+= uas.o
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
-usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
+usb-storage-y := scsiglue.o protocol.o transport.o usb.o
+usb-storage-y += initializers.o sierra_ms.o option_ms.o
 
-usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
-			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
+usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
 
 ifeq ($(CONFIG_USB_LIBUSUAL),)
-	usb-storage-objs	+= usual-tables.o
+	usb-storage-y		+= usual-tables.o
 else
 	obj-$(CONFIG_USB)	+= usb-libusual.o
-	usb-libusual-objs	:= libusual.o usual-tables.o
+	usb-libusual-y		:= libusual.o usual-tables.o
 endif
 
 obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
@@ -33,14 +34,14 @@ obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
 obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
 obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
 
-ums-alauda-objs		:= alauda.o
-ums-cypress-objs	:= cypress_atacb.o
-ums-datafab-objs	:= datafab.o
-ums-freecom-objs	:= freecom.o
-ums-isd200-objs		:= isd200.o
-ums-jumpshot-objs	:= jumpshot.o
-ums-karma-objs		:= karma.o
-ums-onetouch-objs	:= onetouch.o
-ums-sddr09-objs		:= sddr09.o
-ums-sddr55-objs		:= sddr55.o
-ums-usbat-objs		:= shuttle_usbat.o
+ums-alauda-y		:= alauda.o
+ums-cypress-y		:= cypress_atacb.o
+ums-datafab-y		:= datafab.o
+ums-freecom-y		:= freecom.o
+ums-isd200-y		:= isd200.o
+ums-jumpshot-y		:= jumpshot.o
+ums-karma-y		:= karma.o
+ums-onetouch-y		:= onetouch.o
+ums-sddr09-y		:= sddr09.o
+ums-sddr55-y		:= sddr55.o
+ums-usbat-y		:= shuttle_usbat.o
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index d8d98cf..a688b1e 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -113,7 +113,7 @@ static int slave_alloc (struct scsi_device *sdev)
 	 * Let the scanning code know if this target merely sets
 	 * Peripheral Device Type to 0x1f to indicate no LUN.
 	 */
-	if (us->subclass == US_SC_UFI)
+	if (us->subclass == USB_SC_UFI)
 		sdev->sdev_target->pdt_1f_for_no_lun = 1;
 
 	return 0;
@@ -176,7 +176,7 @@ static int slave_configure(struct scsi_device *sdev)
 		/* Disk-type devices use MODE SENSE(6) if the protocol
 		 * (SubClass) is Transparent SCSI, otherwise they use
 		 * MODE SENSE(10). */
-		if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
+		if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
 			sdev->use_10_for_ms = 1;
 
 		/* Many disks only accept MODE SENSE transfer lengths of
@@ -209,6 +209,10 @@ static int slave_configure(struct scsi_device *sdev)
 		if (us->fflags & US_FL_CAPACITY_HEURISTICS)
 			sdev->guess_capacity = 1;
 
+		/* Some devices cannot handle READ_CAPACITY_16 */
+		if (us->fflags & US_FL_NO_READ_CAPACITY_16)
+			sdev->no_read_capacity_16 = 1;
+
 		/* assume SPC3 or latter devices support sense size > 18 */
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;
@@ -245,7 +249,7 @@ static int slave_configure(struct scsi_device *sdev)
 		 * capacity will be decremented or is correct. */
 		if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
 					US_FL_SCM_MULT_TARG)) &&
-				us->protocol == US_PR_BULK)
+				us->protocol == USB_PR_BULK)
 			us->use_last_sector_hacks = 1;
 	} else {
 
@@ -253,6 +257,10 @@ static int slave_configure(struct scsi_device *sdev)
 		 * or to force 192-byte transfer lengths for MODE SENSE.
 		 * But they do need to use MODE SENSE(10). */
 		sdev->use_10_for_ms = 1;
+
+		/* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
+		if (us->fflags & US_FL_NO_READ_DISC_INFO)
+			sdev->no_read_disc_info = 1;
 	}
 
 	/* The CB and CBI transports have no way to pass LUN values
@@ -261,7 +269,7 @@ static int slave_configure(struct scsi_device *sdev)
 	 * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
 	 * be single-LUN.
 	 */
-	if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
 			sdev->scsi_level == SCSI_UNKNOWN)
 		us->max_lun = 0;
 
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index ab5f9f3..bcb9a70 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1760,7 +1760,7 @@ static int sddr09_probe(struct usb_interface *intf,
 	if (result)
 		return result;
 
-	if (us->protocol == US_PR_DPCM_USB) {
+	if (us->protocol == USB_PR_DPCM_USB) {
 		us->transport_name = "Control/Bulk-EUSB/SDDR09";
 		us->transport = dpcm_transport;
 		us->transport_reset = usb_stor_CB_reset;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 64ec073..0041899 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -642,7 +642,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 	 * unless the operation involved a data-in transfer.  Devices
 	 * can signal most data-in errors by stalling the bulk-in pipe.
 	 */
-	if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) &&
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
 			srb->sc_data_direction != DMA_FROM_DEVICE) {
 		US_DEBUGP("-- CB transport device requiring auto-sense\n");
 		need_auto_sense = 1;
@@ -701,8 +701,8 @@ Retry_Sense:
 		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
 
 		/* FIXME: we must do the protocol translation here */
-		if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI ||
-				us->subclass == US_SC_CYP_ATACB)
+		if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
+				us->subclass == USB_SC_CYP_ATACB)
 			srb->cmd_len = 6;
 		else
 			srb->cmd_len = 12;
@@ -926,7 +926,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* NOTE: CB does not have a status stage.  Silly, I know.  So
 	 * we have to catch this at a higher level.
 	 */
-	if (us->protocol != US_PR_CBI)
+	if (us->protocol != USB_PR_CBI)
 		return USB_STOR_TRANSPORT_GOOD;
 
 	result = usb_stor_intr_transfer(us, us->iobuf, 2);
@@ -942,7 +942,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	 * that this means we could be ignoring a real error on these
 	 * commands, but that can't be helped.
 	 */
-	if (us->subclass == US_SC_UFI) {
+	if (us->subclass == USB_SC_UFI) {
 		if (srb->cmnd[0] == REQUEST_SENSE ||
 		    srb->cmnd[0] == INQUIRY)
 			return USB_STOR_TRANSPORT_GOOD;
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
new file mode 100644
index 0000000..2054b1e
--- /dev/null
+++ b/drivers/usb/storage/uas.c
@@ -0,0 +1,751 @@
+/*
+ * USB Attached SCSI
+ * Note that this is not the same as the USB Mass Storage driver
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ * Copyright Sarah Sharp for Intel Corp, 2010
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/usb/storage.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+
+/* Common header for all IUs */
+struct iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+};
+
+enum {
+	IU_ID_COMMAND		= 0x01,
+	IU_ID_STATUS		= 0x03,
+	IU_ID_RESPONSE		= 0x04,
+	IU_ID_TASK_MGMT		= 0x05,
+	IU_ID_READ_READY	= 0x06,
+	IU_ID_WRITE_READY	= 0x07,
+};
+
+struct command_iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__u8 prio_attr;
+	__u8 rsvd5;
+	__u8 len;
+	__u8 rsvd7;
+	struct scsi_lun lun;
+	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
+};
+
+struct sense_iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__be16 status_qual;
+	__u8 status;
+	__u8 service_response;
+	__u8 rsvd8[6];
+	__be16 len;
+	__u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+/*
+ * The r00-r01c specs define this version of the SENSE IU data structure.
+ * It's still in use by several different firmware releases.
+ */
+struct sense_iu_old {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__be16 len;
+	__u8 status;
+	__u8 service_response;
+	__u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+enum {
+	CMD_PIPE_ID		= 1,
+	STATUS_PIPE_ID		= 2,
+	DATA_IN_PIPE_ID		= 3,
+	DATA_OUT_PIPE_ID	= 4,
+
+	UAS_SIMPLE_TAG		= 0,
+	UAS_HEAD_TAG		= 1,
+	UAS_ORDERED_TAG		= 2,
+	UAS_ACA			= 4,
+};
+
+struct uas_dev_info {
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	int qdepth;
+	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
+	unsigned use_streams:1;
+	unsigned uas_sense_old:1;
+};
+
+enum {
+	ALLOC_SENSE_URB		= (1 << 0),
+	SUBMIT_SENSE_URB	= (1 << 1),
+	ALLOC_DATA_IN_URB	= (1 << 2),
+	SUBMIT_DATA_IN_URB	= (1 << 3),
+	ALLOC_DATA_OUT_URB	= (1 << 4),
+	SUBMIT_DATA_OUT_URB	= (1 << 5),
+	ALLOC_CMD_URB		= (1 << 6),
+	SUBMIT_CMD_URB		= (1 << 7),
+};
+
+/* Overrides scsi_pointer */
+struct uas_cmd_info {
+	unsigned int state;
+	unsigned int stream;
+	struct urb *cmd_urb;
+	struct urb *sense_urb;
+	struct urb *data_in_urb;
+	struct urb *data_out_urb;
+	struct list_head list;
+};
+
+/* I hate forward declarations, but I actually have a loop */
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+				struct uas_dev_info *devinfo, gfp_t gfp);
+
+static DEFINE_SPINLOCK(uas_work_lock);
+static LIST_HEAD(uas_work_list);
+
+static void uas_do_work(struct work_struct *work)
+{
+	struct uas_cmd_info *cmdinfo;
+	struct list_head list;
+
+	spin_lock_irq(&uas_work_lock);
+	list_replace_init(&uas_work_list, &list);
+	spin_unlock_irq(&uas_work_lock);
+
+	list_for_each_entry(cmdinfo, &list, list) {
+		struct scsi_pointer *scp = (void *)cmdinfo;
+		struct scsi_cmnd *cmnd = container_of(scp,
+							struct scsi_cmnd, SCp);
+		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_KERNEL);
+	}
+}
+
+static DECLARE_WORK(uas_work, uas_do_work);
+
+static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
+{
+	struct sense_iu *sense_iu = urb->transfer_buffer;
+	struct scsi_device *sdev = cmnd->device;
+
+	if (urb->actual_length > 16) {
+		unsigned len = be16_to_cpup(&sense_iu->len);
+		if (len + 16 != urb->actual_length) {
+			int newlen = min(len + 16, urb->actual_length) - 16;
+			if (newlen < 0)
+				newlen = 0;
+			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
+				"disagrees with IU sense data length %d, "
+				"using %d bytes of sense data\n", __func__,
+					urb->actual_length, len, newlen);
+			len = newlen;
+		}
+		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
+	}
+
+	cmnd->result = sense_iu->status;
+	if (sdev->current_cmnd)
+		sdev->current_cmnd = NULL;
+	cmnd->scsi_done(cmnd);
+	usb_free_urb(urb);
+}
+
+static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
+{
+	struct sense_iu_old *sense_iu = urb->transfer_buffer;
+	struct scsi_device *sdev = cmnd->device;
+
+	if (urb->actual_length > 8) {
+		unsigned len = be16_to_cpup(&sense_iu->len) - 2;
+		if (len + 8 != urb->actual_length) {
+			int newlen = min(len + 8, urb->actual_length) - 8;
+			if (newlen < 0)
+				newlen = 0;
+			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
+				"disagrees with IU sense data length %d, "
+				"using %d bytes of sense data\n", __func__,
+					urb->actual_length, len, newlen);
+			len = newlen;
+		}
+		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
+	}
+
+	cmnd->result = sense_iu->status;
+	if (sdev->current_cmnd)
+		sdev->current_cmnd = NULL;
+	cmnd->scsi_done(cmnd);
+	usb_free_urb(urb);
+}
+
+static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
+							unsigned direction)
+{
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+	int err;
+
+	cmdinfo->state = direction | SUBMIT_SENSE_URB;
+	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+	if (err) {
+		spin_lock(&uas_work_lock);
+		list_add_tail(&cmdinfo->list, &uas_work_list);
+		spin_unlock(&uas_work_lock);
+		schedule_work(&uas_work);
+	}
+}
+
+static void uas_stat_cmplt(struct urb *urb)
+{
+	struct iu *iu = urb->transfer_buffer;
+	struct scsi_device *sdev = urb->context;
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct scsi_cmnd *cmnd;
+	u16 tag;
+
+	if (urb->status) {
+		dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
+		usb_free_urb(urb);
+		return;
+	}
+
+	tag = be16_to_cpup(&iu->tag) - 1;
+	if (sdev->current_cmnd)
+		cmnd = sdev->current_cmnd;
+	else
+		cmnd = scsi_find_tag(sdev, tag);
+	if (!cmnd)
+		return;
+
+	switch (iu->iu_id) {
+	case IU_ID_STATUS:
+		if (urb->actual_length < 16)
+			devinfo->uas_sense_old = 1;
+		if (devinfo->uas_sense_old)
+			uas_sense_old(urb, cmnd);
+		else
+			uas_sense(urb, cmnd);
+		break;
+	case IU_ID_READ_READY:
+		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
+		break;
+	case IU_ID_WRITE_READY:
+		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
+		break;
+	default:
+		scmd_printk(KERN_ERR, cmnd,
+			"Bogus IU (%d) received on status pipe\n", iu->iu_id);
+	}
+}
+
+static void uas_data_cmplt(struct urb *urb)
+{
+	struct scsi_data_buffer *sdb = urb->context;
+	sdb->resid = sdb->length - urb->actual_length;
+	usb_free_urb(urb);
+}
+
+static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+				unsigned int pipe, u16 stream_id,
+				struct scsi_data_buffer *sdb,
+				enum dma_data_direction dir)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct urb *urb = usb_alloc_urb(0, gfp);
+
+	if (!urb)
+		goto out;
+	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
+									sdb);
+	if (devinfo->use_streams)
+		urb->stream_id = stream_id;
+	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
+	urb->sg = sdb->table.sgl;
+ out:
+	return urb;
+}
+
+static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+					struct scsi_cmnd *cmnd, u16 stream_id)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct sense_iu *iu;
+
+	if (!urb)
+		goto out;
+
+	iu = kmalloc(sizeof(*iu), gfp);
+	if (!iu)
+		goto free;
+
+	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
+						uas_stat_cmplt, cmnd->device);
+	urb->stream_id = stream_id;
+	urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+	return urb;
+ free:
+	usb_free_urb(urb);
+	return NULL;
+}
+
+static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
+					struct scsi_cmnd *cmnd, u16 stream_id)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct scsi_device *sdev = cmnd->device;
+	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct command_iu *iu;
+	int len;
+
+	if (!urb)
+		goto out;
+
+	len = cmnd->cmd_len - 16;
+	if (len < 0)
+		len = 0;
+	len = ALIGN(len, 4);
+	iu = kmalloc(sizeof(*iu) + len, gfp);
+	if (!iu)
+		goto free;
+
+	iu->iu_id = IU_ID_COMMAND;
+	iu->tag = cpu_to_be16(stream_id);
+	if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER))
+		iu->prio_attr = UAS_ORDERED_TAG;
+	else
+		iu->prio_attr = UAS_SIMPLE_TAG;
+	iu->len = len;
+	int_to_scsilun(sdev->lun, &iu->lun);
+	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
+
+	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
+							usb_free_urb, NULL);
+	urb->transfer_flags |= URB_FREE_BUFFER;
+ out:
+	return urb;
+ free:
+	usb_free_urb(urb);
+	return NULL;
+}
+
+/*
+ * Why should I request the Status IU before sending the Command IU?  Spec
+ * says to, but also says the device may receive them in any order.  Seems
+ * daft to me.
+ */
+
+static int uas_submit_urbs(struct scsi_cmnd *cmnd,
+					struct uas_dev_info *devinfo, gfp_t gfp)
+{
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+	if (cmdinfo->state & ALLOC_SENSE_URB) {
+		cmdinfo->sense_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
+							cmdinfo->stream);
+		if (!cmdinfo->sense_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_SENSE_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_SENSE_URB) {
+		if (usb_submit_urb(cmdinfo->sense_urb, gfp)) {
+			scmd_printk(KERN_INFO, cmnd,
+					"sense urb submission failure\n");
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_SENSE_URB;
+	}
+
+	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
+		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
+					devinfo->data_in_pipe, cmdinfo->stream,
+					scsi_in(cmnd), DMA_FROM_DEVICE);
+		if (!cmdinfo->data_in_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
+		if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) {
+			scmd_printk(KERN_INFO, cmnd,
+					"data in urb submission failure\n");
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
+	}
+
+	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
+		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
+					devinfo->data_out_pipe, cmdinfo->stream,
+					scsi_out(cmnd), DMA_TO_DEVICE);
+		if (!cmdinfo->data_out_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
+		if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) {
+			scmd_printk(KERN_INFO, cmnd,
+					"data out urb submission failure\n");
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
+	}
+
+	if (cmdinfo->state & ALLOC_CMD_URB) {
+		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd,
+							cmdinfo->stream);
+		if (!cmdinfo->cmd_urb)
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		cmdinfo->state &= ~ALLOC_CMD_URB;
+	}
+
+	if (cmdinfo->state & SUBMIT_CMD_URB) {
+		if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) {
+			scmd_printk(KERN_INFO, cmnd,
+					"cmd urb submission failure\n");
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		cmdinfo->state &= ~SUBMIT_CMD_URB;
+	}
+
+	return 0;
+}
+
+static int uas_queuecommand(struct scsi_cmnd *cmnd,
+					void (*done)(struct scsi_cmnd *))
+{
+	struct scsi_device *sdev = cmnd->device;
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+	int err;
+
+	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
+
+	if (!cmdinfo->sense_urb && sdev->current_cmnd)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+
+	if (blk_rq_tagged(cmnd->request)) {
+		cmdinfo->stream = cmnd->request->tag + 1;
+	} else {
+		sdev->current_cmnd = cmnd;
+		cmdinfo->stream = 1;
+	}
+
+	cmnd->scsi_done = done;
+
+	cmdinfo->state = ALLOC_SENSE_URB | SUBMIT_SENSE_URB |
+			ALLOC_CMD_URB | SUBMIT_CMD_URB;
+
+	switch (cmnd->sc_data_direction) {
+	case DMA_FROM_DEVICE:
+		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+		break;
+	case DMA_BIDIRECTIONAL:
+		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+	case DMA_TO_DEVICE:
+		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
+	case DMA_NONE:
+		break;
+	}
+
+	if (!devinfo->use_streams) {
+		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
+		cmdinfo->stream = 0;
+	}
+
+	err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
+	if (err) {
+		/* If we did nothing, give up now */
+		if (cmdinfo->state & SUBMIT_SENSE_URB) {
+			usb_free_urb(cmdinfo->sense_urb);
+			return SCSI_MLQUEUE_DEVICE_BUSY;
+		}
+		spin_lock(&uas_work_lock);
+		list_add_tail(&cmdinfo->list, &uas_work_list);
+		spin_unlock(&uas_work_lock);
+		schedule_work(&uas_work);
+	}
+
+	return 0;
+}
+
+static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
+							cmnd->request->tag);
+
+/* XXX: Send ABORT TASK Task Management command */
+	return FAILED;
+}
+
+static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
+							cmnd->request->tag);
+
+/* XXX: Send LOGICAL UNIT RESET Task Management command */
+	return FAILED;
+}
+
+static int uas_eh_target_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
+							cmnd->request->tag);
+
+/* XXX: Can we reset just the one USB interface?
+ * Would calling usb_set_interface() have the right effect?
+ */
+	return FAILED;
+}
+
+static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct scsi_device *sdev = cmnd->device;
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct usb_device *udev = devinfo->udev;
+
+	sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
+							cmnd->request->tag);
+
+	if (usb_reset_device(udev))
+		return SUCCESS;
+
+	return FAILED;
+}
+
+static int uas_slave_alloc(struct scsi_device *sdev)
+{
+	sdev->hostdata = (void *)sdev->host->hostdata[0];
+	return 0;
+}
+
+static int uas_slave_configure(struct scsi_device *sdev)
+{
+	struct uas_dev_info *devinfo = sdev->hostdata;
+	scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
+	scsi_activate_tcq(sdev, devinfo->qdepth - 1);
+	return 0;
+}
+
+static struct scsi_host_template uas_host_template = {
+	.module = THIS_MODULE,
+	.name = "uas",
+	.queuecommand = uas_queuecommand,
+	.slave_alloc = uas_slave_alloc,
+	.slave_configure = uas_slave_configure,
+	.eh_abort_handler = uas_eh_abort_handler,
+	.eh_device_reset_handler = uas_eh_device_reset_handler,
+	.eh_target_reset_handler = uas_eh_target_reset_handler,
+	.eh_bus_reset_handler = uas_eh_bus_reset_handler,
+	.can_queue = 65536,	/* Is there a limit on the _host_ ? */
+	.this_id = -1,
+	.sg_tablesize = SG_NONE,
+	.cmd_per_lun = 1,	/* until we override it */
+	.skip_settle_delay = 1,
+	.ordered_tag = 1,
+};
+
+static struct usb_device_id uas_usb_ids[] = {
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
+	/* 0xaa is a prototype device I happen to have access to */
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, uas_usb_ids);
+
+static void uas_configure_endpoints(struct uas_dev_info *devinfo)
+{
+	struct usb_host_endpoint *eps[4] = { };
+	struct usb_interface *intf = devinfo->intf;
+	struct usb_device *udev = devinfo->udev;
+	struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint;
+	unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
+
+	devinfo->uas_sense_old = 0;
+
+	for (i = 0; i < n_endpoints; i++) {
+		unsigned char *extra = endpoint[i].extra;
+		int len = endpoint[i].extralen;
+		while (len > 1) {
+			if (extra[1] == USB_DT_PIPE_USAGE) {
+				unsigned pipe_id = extra[2];
+				if (pipe_id > 0 && pipe_id < 5)
+					eps[pipe_id - 1] = &endpoint[i];
+				break;
+			}
+			len -= extra[0];
+			extra += extra[0];
+		}
+	}
+
+	/*
+	 * Assume that if we didn't find a control pipe descriptor, we're
+	 * using a device with old firmware that happens to be set up like
+	 * this.
+	 */
+	if (!eps[0]) {
+		devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1);
+		devinfo->status_pipe = usb_rcvbulkpipe(udev, 1);
+		devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2);
+		devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2);
+
+		eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+		eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+		eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+	} else {
+		devinfo->cmd_pipe = usb_sndbulkpipe(udev,
+						eps[0]->desc.bEndpointAddress);
+		devinfo->status_pipe = usb_rcvbulkpipe(udev,
+						eps[1]->desc.bEndpointAddress);
+		devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
+						eps[2]->desc.bEndpointAddress);
+		devinfo->data_out_pipe = usb_sndbulkpipe(udev,
+						eps[3]->desc.bEndpointAddress);
+	}
+
+	devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256,
+								GFP_KERNEL);
+	if (devinfo->qdepth < 0) {
+		devinfo->qdepth = 256;
+		devinfo->use_streams = 0;
+	} else {
+		devinfo->use_streams = 1;
+	}
+}
+
+/*
+ * XXX: What I'd like to do here is register a SCSI host for each USB host in
+ * the system.  Follow usb-storage's design of registering a SCSI host for
+ * each USB device for the moment.  Can implement this by walking up the
+ * USB hierarchy until we find a USB host.
+ */
+static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	int result;
+	struct Scsi_Host *shost;
+	struct uas_dev_info *devinfo;
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	if (id->bInterfaceProtocol == 0x50) {
+		int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+/* XXX: Shouldn't assume that 1 is the alternative we want */
+		int ret = usb_set_interface(udev, ifnum, 1);
+		if (ret)
+			return -ENODEV;
+	}
+
+	devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
+	if (!devinfo)
+		return -ENOMEM;
+
+	result = -ENOMEM;
+	shost = scsi_host_alloc(&uas_host_template, sizeof(void *));
+	if (!shost)
+		goto free;
+
+	shost->max_cmd_len = 16 + 252;
+	shost->max_id = 1;
+	shost->sg_tablesize = udev->bus->sg_tablesize;
+
+	result = scsi_add_host(shost, &intf->dev);
+	if (result)
+		goto free;
+	shost->hostdata[0] = (unsigned long)devinfo;
+
+	devinfo->intf = intf;
+	devinfo->udev = udev;
+	uas_configure_endpoints(devinfo);
+
+	scsi_scan_host(shost);
+	usb_set_intfdata(intf, shost);
+	return result;
+ free:
+	kfree(devinfo);
+	if (shost)
+		scsi_host_put(shost);
+	return result;
+}
+
+static int uas_pre_reset(struct usb_interface *intf)
+{
+/* XXX: Need to return 1 if it's not our device in error handling */
+	return 0;
+}
+
+static int uas_post_reset(struct usb_interface *intf)
+{
+/* XXX: Need to return 1 if it's not our device in error handling */
+	return 0;
+}
+
+static void uas_disconnect(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *eps[3];
+	struct Scsi_Host *shost = usb_get_intfdata(intf);
+	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
+
+	scsi_remove_host(shost);
+
+	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+	usb_free_streams(intf, eps, 3, GFP_KERNEL);
+
+	kfree(devinfo);
+}
+
+/*
+ * XXX: Should this plug into libusual so we can auto-upgrade devices from
+ * Bulk-Only to UAS?
+ */
+static struct usb_driver uas_driver = {
+	.name = "uas",
+	.probe = uas_probe,
+	.disconnect = uas_disconnect,
+	.pre_reset = uas_pre_reset,
+	.post_reset = uas_post_reset,
+	.id_table = uas_usb_ids,
+};
+
+static int uas_init(void)
+{
+	return usb_register(&uas_driver);
+}
+
+static void uas_exit(void)
+{
+	usb_deregister(&uas_driver);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp");
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index 8c412f8..fa3e9ed 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -21,11 +21,11 @@
 UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
 		"Fujifilm",
 		"DPC-R1 (Alauda)",
-		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
 
 UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
 		"Olympus",
 		"MAUSB-10 (Alauda)",
-		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 44be6d7..c854fde 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -23,12 +23,12 @@
 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
 /* CY7C68310 : support atacb and atacb2 */
 UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress ISD-300LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index c9298ce..582a603 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -21,7 +21,7 @@
 UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
 		"Datafab",
 		"MDCFE-B USB CF Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /*
@@ -38,45 +38,45 @@ UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
 UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
 		"SIIG/Datafab",
 		"SIIG/Datafab Memory Stick+CF Reader/Writer",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
 UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"MD2/MD3 Disk enclosure",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
 		"PNY/Datafab",
 		"PNY/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"Simple Tech/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Submitted by Olaf Hering <olh@suse.de> */
 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 		"Datafab Systems, Inc.",
 		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Reported by Felix Moeller <felix@derklecks.de>
@@ -86,13 +86,13 @@ UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
 		"DataFab Systems Inc.",
 		"USB CF+MS",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 		"Acomdata",
 		"CF",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		US_FL_SINGLE_LUN),
 
 #endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 2c897ee..6ccdd3d 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -63,26 +63,26 @@
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
 		"ATMEL",
 		"SND1 Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
 /* Reported by Rodolfo Quesada <rquesada@roqz.net> */
 UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
 		"VIA Technologies Inc.",
 		"Mitsumi multi cardreader",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
 		"HP",
 		"CD-Writer+",
-		US_SC_8070, US_PR_CB, NULL, 0),
+		USB_SC_8070, USB_PR_CB, NULL, 0),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 		"HP",
 		"Personal Media Drive",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
 /* Reported by Grant Grundler <grundler@parisc-linux.org>
@@ -91,7 +91,7 @@ UNUSUAL_DEV(  0x03f0, 0x070c, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
 		"HP",
 		"PhotoSmart R707",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
 
 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
@@ -100,14 +100,14 @@ UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
 UNUSUAL_DEV(  0x0409, 0x0040, 0x0000, 0x9999,
 		"NEC",
 		"NEC USB UF000x",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
 UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 		"VIA Technologies Inc.",
 		"USB 2.0 Card Reader",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
@@ -117,40 +117,40 @@ UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 		"Buffalo",
 		"DUB-P40G HDD",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
 UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
 		"Samsung Info. Systems America, Inc.",
 		"MP3 Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Orgad Shaneh <orgads@gmail.com> */
 UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
 		"Samsung", "MP3 Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Christian Leber <christian@leber.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 		"TrekStor",
 		"i.Beat 115 2.0",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
 
 /* Reported by Stefan Werner <dustbln@gmx.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
 		"TrekStor",
 		"i.Beat Joy 2.0",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
 UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Andrew Nayenko <relan@bk.ru>
@@ -158,28 +158,28 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
 		"Nokia",
 		"Nokia 6288",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Mario Rettig <mariorettig@web.de> */
 UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
 		"Nokia",
 		"Nokia 3250",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by <honkkis@gmail.com> */
 UNUSUAL_DEV(  0x0421, 0x0433, 0x0100, 0x0100,
 		"Nokia",
 		"E70",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Jon Hart <Jon.Hart@web.de> */
 UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 		"Nokia",
 		"E60",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
@@ -187,7 +187,7 @@ UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 		"Nokia",
 		"N91",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
@@ -195,42 +195,42 @@ UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 		"Nokia",
 		"N80",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
 UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
 		"Nokia",
 		"E61",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Bardur Arantsson <bardur@scientician.net> */
 UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
 		"Nokia",
 		"6131",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
 UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
 		"Nokia",
 		"Nokia 6233",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Alex Corcoles <alex@corcoles.net> */
 UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		"Nokia",
 		"6234",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 #ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 #endif
 
@@ -239,7 +239,7 @@ UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 		"Neuros Audio",
 		"USB 2.0 HD 2.5",
-		US_SC_DEVICE, US_PR_BULK, NULL,
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
 /*
@@ -250,7 +250,7 @@ UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 		"USBest Technology",	/* sold by Transcend */
 		"USB Mass Storage Device",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
 /*
 * Bohdan Linda <bohdan.linda@gmail.com>
@@ -260,7 +260,7 @@ UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 		"USB 2.0",
 		"Flash Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
 /* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
@@ -272,7 +272,7 @@ UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x0000,
 		"Mitac",
 		"GPS",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /*
@@ -284,32 +284,32 @@ UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
 		"AMI",
 		"Virtual Floppy",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT),
 
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 		"Kyocera",
 		"Finecam S3x",
-		US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+		USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
 
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
 		"Kyocera",
 		"Finecam S4",
-		US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+		USB_SC_8070, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
 
 /* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
 UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 		"Kyocera",
 		"Finecam S5",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
 /* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
 UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
 		"Kyocera",
 		"CONTAX SL300R T*",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
 
 /* Reported by Paul Stewart <stewart@wetlogic.net>
@@ -317,7 +317,7 @@ UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 		"Hitachi",
 		"DVD-CAM DZ-MV100A Camcorder",
-		US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
+		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_SINGLE_LUN),
 
 /* BENQ DC5330
  * Reported by Manuel Fombuena <mfombuena@ya.com> and
@@ -325,7 +325,7 @@ UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
 UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Patch for Nikon coolpix 2000
@@ -333,14 +333,14 @@ UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
 		"NIKON",
 		"NIKON DSC E2000",
-		US_SC_DEVICE, US_PR_DEVICE,NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE,NULL,
 		US_FL_NOT_LOCKABLE ),
 
 /* Reported by Doug Maxey (dwm@austin.ibm.com) */
 UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		"IBM",
 		"IBM RSA2",
-		US_SC_DEVICE, US_PR_CB, NULL,
+		USB_SC_DEVICE, USB_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
 /* Reported by Simon Levitt <simon@whattf.com>
@@ -348,14 +348,14 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
 		"Epson",
 		"875DC Storage",
-		US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+		USB_SC_SCSI, USB_PR_CB, NULL, US_FL_FIX_INQUIRY),
 
 /* Reported by Khalid Aziz <khalid@gonehiking.org>
  * This entry is needed because the device reports Sub=ff */
 UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 		"Epson",
 		"785EPX Storage",
-		US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
+		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
 /* Not sure who reported this originally but
  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
@@ -363,7 +363,7 @@ UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 		"Fujifilm",
 		"FinePix 1400Zoom",
-		US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+		USB_SC_UFI, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
 /* Reported by Ondrej Zary <linux@rainbow-software.org>
  * The device reports one sector more and breaks when that sector is accessed
@@ -371,7 +371,7 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 		"ScanLogic",
 		"SL11R-IDE",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Kriston Fincher <kriston@airmail.net>
@@ -382,27 +382,27 @@ UNUSUAL_DEV(  0x04ce, 0x0002, 0x026c, 0x026c,
 UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
 		"Panasonic",
 		"LS-120 Camera",
-		US_SC_UFI, US_PR_DEVICE, NULL, 0),
+		USB_SC_UFI, USB_PR_DEVICE, NULL, 0),
 
 /* From Yukihiro Nakai, via zaitcev@yahoo.com.
  * This is needed for CB instead of CBI */
 UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
 		"Sharp CE-CW05",
 		"CD-R/RW Drive",
-		US_SC_8070, US_PR_CB, NULL, 0),
+		USB_SC_8070, USB_PR_CB, NULL, 0),
 
 /* Reported by Adriaan Penning <a.penning@luon.net> */
 UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
 		"Panasonic",
 		"DMC-LCx Camera",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
 /* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
 UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 		"LEICA",
 		"D-LUX Camera",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
 /* Most of the following entries were developed with the help of
@@ -411,19 +411,19 @@ UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
 		"Matshita",
 		"LS-120",
-		US_SC_8020, US_PR_CB, NULL, 0),
+		USB_SC_8020, USB_PR_CB, NULL, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
 #ifdef NO_SDDR09
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB CompactFlash Adapter",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 #endif
 
@@ -431,54 +431,54 @@ UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
 		"SCM Microsystems Inc.",
 		"eUSB MMC Adapter",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
 /* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
 UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
 		"Shuttle",
 		"eUSB MMC Adapter",
-		US_SC_SCSI, US_PR_DEVICE, NULL,
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
 		"Sony",
 		"Hifd",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
 		"Shuttle",
 		"eUSB ATA/ATAPI Adapter",
-		US_SC_8020, US_PR_CB, NULL, 0),
+		USB_SC_8020, USB_PR_CB, NULL, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 		"Shuttle",
 		"eUSB CompactFlash Adapter",
-		US_SC_8020, US_PR_CB, NULL, 0),
+		USB_SC_8020, USB_PR_CB, NULL, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"Shuttle",
 		"CD-RW Device",
-		US_SC_8020, US_PR_CB, NULL, 0),
+		USB_SC_8020, USB_PR_CB, NULL, 0),
 
 /* Reported by Dmitry Khlystov <adminimus@gmail.com> */
 UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		"Samsung",
 		"YP-U3",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
@@ -488,14 +488,14 @@ UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
 		"Kobian Mercury",
 		"Binocam DCB-132",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 		"Belkin",
 		"USB SCSI Adaptor",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
 /* Iomega Clik! Drive 
@@ -505,14 +505,14 @@ UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 		"Iomega",
 		"USB Clik! 40",
-		US_SC_8070, US_PR_DEVICE, NULL,
+		USB_SC_8070, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Added by Alan Stern <stern@rowland.harvard.edu> */
 COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
 		"Linux",
 		"File-backed Storage Gadget",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_CAPACITY_OK ),
 
 /* Yakumo Mega Image 37
@@ -520,7 +520,7 @@ COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Another Yakumo camera.
@@ -528,14 +528,14 @@ UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
 UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"300_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Yakumo Mega Image 47
@@ -543,7 +543,7 @@ UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Paul Ortyl <ortylp@3miasto.net>
@@ -551,13 +551,13 @@ UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",
 		"400_CAMERA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		"Sony",
 		"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
-		US_SC_SCSI, US_PR_DEVICE, NULL,
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
 /* Submitted by Lars Jacob <jacob.lars@googlemail.com>
@@ -565,7 +565,7 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
 		"DSC-T1/T5/H5",
-		US_SC_8070, US_PR_DEVICE, NULL,
+		USB_SC_8070, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 
@@ -573,88 +573,88 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
 		"Sony",
 		"Memorystick NW-MS7",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
 UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
 		"Sony",
 		"USB Floppy Drive",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
 		"Sony",
 		"Memorystick MSAC-US1",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Klaus Mueller <k.mueller@intershop.de> */
 UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
 		"Sony",
 		"Handycam",
-		US_SC_SCSI, US_PR_DEVICE, NULL,
+		USB_SC_SCSI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
 UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
 		"Sony",
 		"Handycam HC-85",
-		US_SC_UFI, US_PR_DEVICE, NULL,
+		USB_SC_UFI, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
 		"Sony",
 		"Memorystick MSC-U01N",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Michal Mlotek <mlotek@foobar.pl> */
 UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
 		"Sony",
 		"PEG N760c Memorystick",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 		
 UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
 		"Sony",
 		"Memorystick MSC-U03",
-		US_SC_UFI, US_PR_CB, NULL,
+		USB_SC_UFI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Nathan Babb <nathan@lexi.com> */
 UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
 		"Sony",
 		"PEG Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
 UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
 		"Sony",
 		"PEG Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
 UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
 		"Sony",
 		"PEG Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* floppy reports multiple luns */
 UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
 		"SAMSUNG",
 		"SFD-321U [FW 0C]",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* We keep this entry to force the transport; firmware 3.00 and later is ok. */
 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 		"Y-E Data",
 		"Flashbuster-U",
-		US_SC_DEVICE,  US_PR_CB, NULL,
+		USB_SC_DEVICE,  USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN),
 
 /* Reported by Johann Cardon <johann.cardon@free.fr>
@@ -664,20 +664,20 @@ UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
 UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
 		"Y-E Data",
 		"Silicon Media R/W",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
 
 /* Reported by RTE <raszilki@yandex.ru> */
 UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
 		"JetFlash",
 		"TS1GJF2A/120",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Fabrizio Fellini <fello@libero.it> */
 UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 		"Fujifilm",
 		"Digital Camera EX-20 DSC",
-		US_SC_8070, US_PR_DEVICE, NULL, 0 ),
+		USB_SC_8070, USB_PR_DEVICE, NULL, 0 ),
 
 /* Reported by Andre Welter <a.r.welter@gmx.de>
  * This antique device predates the release of the Bulk-only Transport
@@ -688,14 +688,14 @@ UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
 		"Iomega",
 		"ZIP 100",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
 UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
 		"LaCie",
 		"DVD+-RW",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
@@ -705,7 +705,7 @@ UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 		"In-System",
 		"PyroGate External CD-ROM Enclosure (FCD-523)",
-		US_SC_SCSI, US_PR_BULK, NULL,
+		USB_SC_SCSI, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
 /* Submitted by Sven Anderson <sven-linux@anderson.de>
@@ -717,26 +717,26 @@ UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
 UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /* Reported by Avi Kivity <avi@argo.co.il> */
 UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
 
 UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /*
@@ -746,7 +746,7 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
 UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 		"Apple",
 		"iPod",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /* Reported by Dan Williams <dcbw@redhat.com>
@@ -758,14 +758,14 @@ UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x05c6, 0x1000, 0x0000, 0x9999,
 		"Option N.V.",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
 		0),
 
 /* Reported by Blake Matheny <bmatheny@purdue.edu> */
 UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 		"Lexar",
 		"USB CF Reader",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* The following two entries are for a Genesys USB to IDE
@@ -782,20 +782,20 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Optical",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
 		"Genesys Logic",
 		"USB to SATA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
 /* Reported by Hanno Boeck <hanno@gmx.de>
@@ -803,33 +803,33 @@ UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
 UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
 		"Vivitar",
 		"Vivicam 35Xx",
-		US_SC_SCSI, US_PR_BULK, NULL,
+		USB_SC_SCSI, USB_PR_BULK, NULL,
 		US_FL_FIX_INQUIRY ),
 
 UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 		"TEAC",
 		"Floppy Drive",
-		US_SC_UFI, US_PR_CB, NULL, 0 ),
+		USB_SC_UFI, USB_PR_CB, NULL, 0 ),
 
 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		"SigmaTel",
 		"USBMSC Audio Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /* Reported by Daniel Kukula <daniel.kuku@gmail.com> */
 UNUSUAL_DEV( 0x067b, 0x1063, 0x0100, 0x0100,
 		"Prolific Technology, Inc.",
 		"Prolific Storage Gadget",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BAD_SENSE ),
 
 /* Reported by Rogerio Brito <rbrito@ime.usp.br> */
 UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
 		"Prolific Technology, Inc.",
 		"Mass Storage Device",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE ),
 
 /* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
@@ -838,46 +838,47 @@ UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
 UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
 		"Prolific Technology Inc.",
 		"Mass Storage Device",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 
 /* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
 UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0101,
 		"Prolific Technology Inc.",
 		"ATAPI-6 Bridge Controller",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
 
 /* Submitted by Benny Sjostrand <benny@hostmobility.com> */
 UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
 		"Minolta",
 		"Dimage F300",
-		US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+		USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
 
 /* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
 UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
 		"Minolta",
 		"DIMAGE E223",
-		US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
+		USB_SC_SCSI, USB_PR_DEVICE, NULL, 0 ),
 
 UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
 		"Hagiwara",
 		"Flashgate",
-		US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+		USB_SC_SCSI, USB_PR_BULK, NULL, 0 ),
 
 /* Reported by David Hamilton <niftimusmaximus@lycos.com> */
 UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 		"Thomson Multimedia Inc.",
 		"RCA RD1080 MP3 Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
 UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 		"RockChip",
 		"MP3",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64 |
+		US_FL_NO_READ_CAPACITY_16),
 
 /* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
  * Support the following product :
@@ -886,7 +887,7 @@ UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
 		"RockChip",
 		"MTP",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
@@ -902,59 +903,59 @@ UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
 		"RockChip",
 		"ROCK MP3",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
 /* Reported by Olivier Blondeau <zeitoun@gmail.com> */
 UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
 		"ATMEL",
 		"SND1 Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
 /* Submitted by Roman Hodek <roman@hodek.net> */
 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 		"Sandisk",
 		"ImageMate SDDR-05a",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
 UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
 		"SanDisk Corporation",
 		"ImageMate CompactFlash USB",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 		"Sandisk",
 		"ImageMate SDDR-12",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Reported by Eero Volotinen <eero@ping-viini.org> */
 UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 		"Freecom Technologies",
 		"FHD-Classic",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 		"Microtech",
 		"USB-SCSI-DB25",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"USB-SCSI-HD50",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
 #ifdef NO_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
-		US_SC_SCSI, US_PR_CB, NULL,
+		USB_SC_SCSI, USB_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 #endif
 
@@ -967,7 +968,7 @@ UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		"Datafab",
 		"KECF-USB",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
 /* Reported by Rauch Wolke <rauchwolke@gmx.net>
@@ -976,7 +977,7 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"CF+SM Reader",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
@@ -986,42 +987,42 @@ UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
  * - They don't like the INQUIRY command. So we must handle this command
  *   of the SCSI layer ourselves.
  * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
- *   bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
- *   So don't remove the US_PR_CB override!
- * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
+ *   bInterfaceProtocol=0x00 (USB_PR_CBI) while others have 0x01 (USB_PR_CB).
+ *   So don't remove the USB_PR_CB override!
+ * - Cameras with bcdDevice=0x9009 require the USB_SC_8070 override.
  */
 UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
 		"Casio",
 		"QV DigitalCamera",
-		US_SC_8070, US_PR_CB, NULL,
+		USB_SC_8070, USB_PR_CB, NULL,
 		US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
 
 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
 		"Samsung",
 		"Digimax 410",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY),
 
 /* Reported by Luciano Rocha <luciano@eurotux.com> */
 UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001,
 		"Argosy",
 		"Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported and patched by Nguyen Anh Quynh <aquynh@gmail.com> */
 UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001,
 		"Argosy",
 		"Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
 UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
 		"Argosy",
 		"Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
@@ -1033,7 +1034,7 @@ UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
 UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		"Grandtech",
 		"DC2MEGA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
 /* Andrew Lunn <andrew@lunn.ch>
@@ -1044,14 +1045,14 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
 		"PanDigital",
 		"Photo Frame",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE),
 
 /* Submitted by Jan De Luyck <lkml@kcore.org> */
 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		"CITIZEN",
 		"X1DE-USB",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN),
 
 /* Submitted by Dylan Taft <d13f00l@gmail.com>
@@ -1060,7 +1061,7 @@ UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
 		"AIPTEK",
 		"Aiptek USB Keychain MP3 Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE),
 
 /* Entry needed for flags. Moreover, all devices with this ID use
@@ -1071,7 +1072,7 @@ UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 		"Trumpion",
 		"t33520 USB Flash Card Controller",
-		US_SC_DEVICE, US_PR_BULK, NULL,
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
 /* Reported by Filippo Bardelli <filibard@libero.it>
@@ -1080,21 +1081,21 @@ UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
 		"Trumpion Microelectronics, Inc.",
 		"33520 USB Digital Voice Recorder",
-		US_SC_UFI, US_PR_DEVICE, NULL,
+		USB_SC_UFI, USB_PR_DEVICE, NULL,
 		0),
 
 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		"Trumpion",
 		"MP3 player",
-		US_SC_RBC, US_PR_BULK, NULL,
+		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",
 		"5-in-1 Card Reader",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
 /* This Pentax still camera is not conformant
@@ -1107,7 +1108,7 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
 		"Pentax",
 		"Optio 2/3/400",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* These are virtual windows driver CDs, which the zd1211rw driver
@@ -1115,13 +1116,13 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
 UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
 		"ZyXEL",
 		"G-220F USB-WLAN Install",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
 UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
 		"SiteCom",
 		"WL-117 USB-WLAN Install",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE ),
 
 /* Reported by Dan Williams <dcbw@redhat.com>
@@ -1133,7 +1134,7 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
 UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
 		"Option N.V.",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init,
 		0),
 
 /* Reported by F. Aben <f.aben@option.com>
@@ -1143,7 +1144,7 @@ UNUSUAL_DEV(  0x0af0, 0x6971, 0x0000, 0x9999,
 UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 		"Option",
 		"GI 0401 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 /* Reported by Jan Dumon <j.dumon@option.com>
@@ -1153,104 +1154,104 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
 UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
 		"Option",
 		"GI 0431 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x7701, 0x0000, 0x0000,
 		"Option",
 		"GI 0451 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x7706, 0x0000, 0x0000,
 		"Option",
 		"GI 0451 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x7901, 0x0000, 0x0000,
 		"Option",
 		"GI 0452 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x7A01, 0x0000, 0x0000,
 		"Option",
 		"GI 0461 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x7A05, 0x0000, 0x0000,
 		"Option",
 		"GI 0461 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x8300, 0x0000, 0x0000,
 		"Option",
 		"GI 033x SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x8302, 0x0000, 0x0000,
 		"Option",
 		"GI 033x SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0000,
 		"Option",
 		"GI 033x SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
 		"Option",
 		"GI 070x SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xd057, 0x0000, 0x0000,
 		"Option",
 		"GI 1505 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xd058, 0x0000, 0x0000,
 		"Option",
 		"GI 1509 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xd157, 0x0000, 0x0000,
 		"Option",
 		"GI 1515 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xd257, 0x0000, 0x0000,
 		"Option",
 		"GI 1215 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 UNUSUAL_DEV( 0x0af0, 0xd357, 0x0000, 0x0000,
 		"Option",
 		"GI 1505 SD-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
 		"Seagate",
 		"FreeAgent Pro",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE ),
 
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 		"Maxtor",
 		"USB to SATA",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE),
 
 /*
@@ -1260,14 +1261,14 @@ UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
 		"Unknown",
 		"Unknown",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
 /* Submitted by Joris Struyve <joris@struyve.be> */
 UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 		"Medion",
 		"MD 7425",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY),
 
 /*
@@ -1278,13 +1279,13 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
 		"Jenoptik",
 		"JD 5200 z3",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
 /* Reported by  Jason Johnston <killean@shaw.ca> */
 UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
 		"Macpower Technology Co.LTD.",
 		"USB 2.0 3.5\" DEVICE",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Lubomir Blaha <tritol@trilogic.cz>
@@ -1295,7 +1296,7 @@ UNUSUAL_DEV(  0x0dc4, 0x0073, 0x0000, 0x0000,
 UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
 		"Netac",
 		"USB-CF-Card",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Reported by Edward Chapman (taken from linux-usb mailing list)
@@ -1303,7 +1304,7 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
 UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 		"Netac",
 		"USB Flash Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 
@@ -1312,28 +1313,28 @@ UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
 UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
 		"WINWARD",
 		"Music Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Ian McConnell <ian at emit.demon.co.uk> */
 UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
 		"PNP_MP3",
 		"PNP_MP3 PLAYER",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
 UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
 		"Cowon Systems",
 		"iAUDIO M5",
-		US_SC_DEVICE, US_PR_BULK, NULL,
+		USB_SC_DEVICE, USB_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 		"USB",
 		"Solid state disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Submitted by Daniel Drake <dsd@gentoo.org>
@@ -1341,14 +1342,14 @@ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
 		"Ours Technology",
 		"Flash Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
 UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 		"USB",
 		"Flash Disk",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Benjamin Schiller <sbenni@gmx.de>
@@ -1356,7 +1357,7 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
 		"Typhoon",
 		"My DJ 1820",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
 
 /* Patch by Leonid Petrov mail at lpetrov.net
@@ -1367,7 +1368,7 @@ UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
 UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
 		"Oracom Co., Ltd",
 		"ORC-200M",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* David Kuehling <dvdkhlng@gmx.de>:
@@ -1377,21 +1378,21 @@ UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
 		"C-MEX",
 		"A-VOX",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"V800-Vodafone 802",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
 /* Reported by The Solutor <thesolutor@gmail.com> */
 UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"MD400",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_DEVICE),
 
 /* Reported by Jan Mate <mate@fiit.stuba.sk>
@@ -1399,21 +1400,21 @@ UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
 UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"M600i",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
 /* Reported by Ricardo Barberis <ricardo@dattatec.com> */
 UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P1i",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
@@ -1425,13 +1426,13 @@ UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
 		"Desknote",
 		"UCR-61S2B",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_ucr61s2b_init,
 		0 ),
 
 UNUSUAL_DEV(  0x1058, 0x0704, 0x0000, 0x9999,
 		"Western Digital",
 		"External HDD",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SANE_SENSE),
 
 /* Reported by Fabio Venturi <f.venturi@tdnet.it>
@@ -1440,7 +1441,7 @@ UNUSUAL_DEV(  0x1058, 0x0704, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		"Actions Semiconductor",
 		"Mtp device",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0),
 
 /* Reported by Pascal Terjan <pterjan@mandriva.com>
@@ -1449,7 +1450,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
            "D-Link",
            "USB Mass Storage",
-           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
+           USB_SC_DEVICE, USB_PR_DEVICE, option_ms_init, US_FL_IGNORE_DEVICE),
 
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
@@ -1459,7 +1460,7 @@ UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"Sierra Wireless",
 		"USB MMC Storage",
-		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, sierra_ms_init,
 		0),
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
@@ -1469,7 +1470,7 @@ UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 		"Digitech HMG",
 		"DigiTech Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by fangxiaozhi <huananhu@huawei.com>
@@ -1478,353 +1479,353 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
 UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
 		"Minolta",
 		"Dimage Z10",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		0 ),
 
 /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
 UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 		"SWISSBIT",
 		"Black Silver",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Francesco Foresti <frafore@tiscali.it> */
 UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
 		"Super Top",
 		"IDE DEVICE",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br>
@@ -1833,7 +1834,7 @@ UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
 UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
 		"JMicron",
 		"USB to ATA/ATAPI Bridge",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
 
 /* Reported by Robert Schedel <r.schedel@yahoo.de>
@@ -1841,7 +1842,7 @@ UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		"Teac",
 		"HD-35PUK-B",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Hans de Goede <hdegoede@redhat.com>
@@ -1851,18 +1852,23 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
 		"BUILDWIN",
 		"Photo Frame",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BAD_SENSE ),
 UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
 		"BUILDWIN",
 		"Photo Frame",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
+		"BUILDWIN",
+		"Photo Frame",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_DISC_INFO ),
 
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
@@ -1871,7 +1877,7 @@ UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
 		"Motorola",
 		"RAZR V3x",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /*
@@ -1882,14 +1888,14 @@ UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
 UNUSUAL_DEV(  0x22b8, 0x6426, 0x0101, 0x0101,
 		"Motorola",
 		"MSnc.",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
 
 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		"MPIO",
 		"HS200",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
@@ -1898,21 +1904,21 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x3340, 0xffff, 0x0000, 0x0000,
 		"Mitac",
 		"Mio DigiWalker USB Sync",
-		US_SC_DEVICE,US_PR_DEVICE,NULL,
+		USB_SC_DEVICE,USB_PR_DEVICE,NULL,
 		US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
 UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
 		"iRiver",
 		"MP3 T10",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Sergey Pinaev <dfo@antex.ru> */
 UNUSUAL_DEV(  0x4102, 0x1059, 0x0000,  0x0000,
                "iRiver",
                "P7K",
-               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               USB_SC_DEVICE, USB_PR_DEVICE, NULL,
                US_FL_MAX_SECTORS_64 ),
 
 /*
@@ -1922,41 +1928,41 @@ UNUSUAL_DEV(  0x4102, 0x1059, 0x0000,  0x0000,
 UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
 		"Iomega",
 		"Micro Mini 1GB",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		"DataStor",
 		"USB4500 FW1.04",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_CAPACITY_HEURISTICS),
 
 /* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
 UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
 		"TGE",
 		"Digital MP3 Audio Player",
-		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
 /* Control/Bulk transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_RBC, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CB, USB_US_TYPE_STOR),
 
 /* Control/Bulk/Interrupt transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_RBC, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_CBI, USB_US_TYPE_STOR),
 
 /* Bulk-only transport for all SubClass values */
-USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
-USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
+USUAL_DEV(USB_SC_RBC, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8020, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_QIC, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_UFI, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_8070, USB_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0),
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 3758679..59a2611 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -21,6 +21,6 @@
 UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
 		"Freecom",
 		"USB-IDE",
-		US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+		USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index 0d99dde..14cca0c 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -21,37 +21,37 @@
 UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
 		"Sony",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
 		"In-System",
 		"USB/IDE Bridge (ATA/ATAPI)",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
 		"In-System",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
 		"In-System",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
 		"In-System",
 		"USB Storage Adapter V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 		"ATI",
 		"USB Cable 205",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index 2e549b1..54be78b 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -21,7 +21,7 @@
 UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
 		"Lexar",
 		"Jumpshot USB CF Reader",
-		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+		USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
 		US_FL_NEED_OVERRIDE),
 
 #endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index 12ae3a0..6df0397 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -21,6 +21,6 @@
 UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		"Rio",
 		"Rio Karma",
-		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
+		USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index bd9306b..0abb819 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -24,13 +24,13 @@
 UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
 		"Maxtor",
 		"OneTouch External Harddrive",
-		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
 		0),
 
 UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
 		"Maxtor",
 		"OneTouch External Harddrive",
-		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
 		0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index 50cab51..59a7e37 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -21,36 +21,36 @@
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate (DPCM_USB)",
-		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 /* This entry is from Andries.Brouwer@cwi.nl */
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB SmartMedia / CompactFlash Adapter",
-		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
 		0),
 
 UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
 		"Olympus",
 		"Camedia MAUSB-2",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR-09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate (DPCM_USB)",
-		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index ae81ef7..fcb7e12 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -22,23 +22,23 @@
 UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
 		"Datafab",
 		"MDSM-B reader",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
+		USB_SC_SCSI, USB_PR_SDDR55, NULL,
 		US_FL_FIX_INQUIRY),
 
 /* SM part - aeb <Andries.Brouwer@cwi.nl> */
 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 		"Datafab Systems, Inc.",
 		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 		"Acomdata",
 		"SM",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR55",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 80e869f..38e79c4 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -21,23 +21,23 @@
 UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
 		"HP",
 		"CD-Writer+ 8200e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
 
 UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
 		"HP",
 		"CD-Writer+ CD-4e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
 		"Shuttle/SCM",
 		"USBAT-02",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
 		"Sandisk",
 		"ImageMate SDDR-05b",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
 		US_FL_SINGLE_LUN),
 
 #endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 90bb017..4219c19 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -512,10 +512,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
-	us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
+	us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
 			idesc->bInterfaceSubClass :
 			unusual_dev->useProtocol;
-	us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
+	us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
 			idesc->bInterfaceProtocol :
 			unusual_dev->useTransport;
 	us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
@@ -552,10 +552,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 		struct usb_device_descriptor *ddesc = &dev->descriptor;
 		int msg = -1;
 
-		if (unusual_dev->useProtocol != US_SC_DEVICE &&
+		if (unusual_dev->useProtocol != USB_SC_DEVICE &&
 			us->subclass == idesc->bInterfaceSubClass)
 			msg += 1;
-		if (unusual_dev->useTransport != US_PR_DEVICE &&
+		if (unusual_dev->useTransport != USB_PR_DEVICE &&
 			us->protocol == idesc->bInterfaceProtocol)
 			msg += 2;
 		if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
@@ -582,21 +582,21 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
-	case US_PR_CB:
+	case USB_PR_CB:
 		us->transport_name = "Control/Bulk";
 		us->transport = usb_stor_CB_transport;
 		us->transport_reset = usb_stor_CB_reset;
 		us->max_lun = 7;
 		break;
 
-	case US_PR_CBI:
+	case USB_PR_CBI:
 		us->transport_name = "Control/Bulk/Interrupt";
 		us->transport = usb_stor_CB_transport;
 		us->transport_reset = usb_stor_CB_reset;
 		us->max_lun = 7;
 		break;
 
-	case US_PR_BULK:
+	case USB_PR_BULK:
 		us->transport_name = "Bulk";
 		us->transport = usb_stor_Bulk_transport;
 		us->transport_reset = usb_stor_Bulk_reset;
@@ -608,35 +608,35 @@ static void get_transport(struct us_data *us)
 static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
-	case US_SC_RBC:
+	case USB_SC_RBC:
 		us->protocol_name = "Reduced Block Commands (RBC)";
 		us->proto_handler = usb_stor_transparent_scsi_command;
 		break;
 
-	case US_SC_8020:
+	case USB_SC_8020:
 		us->protocol_name = "8020i";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_QIC:
+	case USB_SC_QIC:
 		us->protocol_name = "QIC-157";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_8070:
+	case USB_SC_8070:
 		us->protocol_name = "8070i";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_SCSI:
+	case USB_SC_SCSI:
 		us->protocol_name = "Transparent SCSI";
 		us->proto_handler = usb_stor_transparent_scsi_command;
 		break;
 
-	case US_SC_UFI:
+	case USB_SC_UFI:
 		us->protocol_name = "Uniform Floppy Interface (UFI)";
 		us->proto_handler = usb_stor_ufi_command;
 		break;
@@ -679,7 +679,7 @@ static int get_pipes(struct us_data *us)
 		}
 	}
 
-	if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
+	if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
 		US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
 		return -EIO;
 	}
@@ -834,7 +834,7 @@ static int usb_stor_scan_thread(void * __us)
 	if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
 
 		/* For bulk-only devices, determine the max LUN value */
-		if (us->protocol == US_PR_BULK &&
+		if (us->protocol == USB_PR_BULK &&
 				!(us->fflags & US_FL_SINGLE_LUN)) {
 			mutex_lock(&us->dev_mutex);
 			us->max_lun = usb_stor_Bulk_max_lun(us);