Reset to 3.12.37

85 files changed, 1695 insertions, 695 deletions

diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 2d51d85..ca1123d 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -20,13 +20,13 @@
 static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 {
 	struct device *dev = ci->gadget.dev.parent;
-	int val;
 
 	switch (event) {
 	case CI_HDRC_CONTROLLER_RESET_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
 		writel(0, USB_AHBBURST);
 		writel(0, USB_AHBMODE);
+		usb_phy_init(ci->transceiver);
 		break;
 	case CI_HDRC_CONTROLLER_STOPPED_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_STOPPED_EVENT received\n");
@@ -34,10 +34,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 		 * Put the transceiver in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
-		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
+		usb_phy_notify_disconnect(ci->transceiver, USB_SPEED_UNKNOWN);
 		break;
 	default:
 		dev_dbg(dev, "unknown ci_hdrc event\n");
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 938426a..455e4e6 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1178,8 +1178,8 @@ static int ep_enable(struct usb_ep *ep,
 
 	if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
 		cap |= QH_IOS;
-	if (hwep->num)
-		cap |= QH_ZLT;
+
+	cap |= QH_ZLT;
 	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
 	/*
 	 * For ISO-TX, we set mult at QH as the largest value, and use
@@ -1325,6 +1325,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
 	unsigned long flags;
+	struct td_node *node, *tmpnode;
 
 	if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
 		hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
@@ -1335,6 +1336,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 
+	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
+		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
+		list_del(&node->td);
+		kfree(node);
+	}
+
 	/* pop request */
 	list_del_init(&hwreq->queue);
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e840431..2574b24 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -122,13 +122,23 @@ static void acm_release_minor(struct acm *acm)
 static int acm_ctrl_msg(struct acm *acm, int request, int value,
 							void *buf, int len)
 {
-	int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
+	int retval;
+
+	retval = usb_autopm_get_interface(acm->control);
+	if (retval)
+		return retval;
+
+	retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
 		request, USB_RT_ACM, value,
 		acm->control->altsetting[0].desc.bInterfaceNumber,
 		buf, len, 5000);
+
 	dev_dbg(&acm->control->dev,
 			"%s - rq 0x%02x, val %#x, len %#x, result %d\n",
 			__func__, request, value, len, retval);
+
+	usb_autopm_put_interface(acm->control);
+
 	return retval < 0 ? retval : 0;
 }
 
@@ -484,6 +494,7 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
 {
 	struct acm *acm = container_of(port, struct acm, port);
 	int retval = -ENODEV;
+	int i;
 
 	dev_dbg(&acm->control->dev, "%s\n", __func__);
 
@@ -532,6 +543,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
 	return 0;
 
 error_submit_read_urbs:
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_kill_urb(acm->read_urbs[i]);
 	acm->ctrlout = 0;
 	acm_set_control(acm, acm->ctrlout);
 error_set_control:
@@ -559,21 +572,35 @@ static void acm_port_destruct(struct tty_port *port)
 static void acm_port_shutdown(struct tty_port *port)
 {
 	struct acm *acm = container_of(port, struct acm, port);
+	struct urb *urb;
+	struct acm_wb *wb;
 	int i;
+	int pm_err;
 
 	dev_dbg(&acm->control->dev, "%s\n", __func__);
 
 	mutex_lock(&acm->mutex);
 	if (!acm->disconnected) {
-		usb_autopm_get_interface(acm->control);
+		pm_err = usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
+
+		for (;;) {
+			urb = usb_get_from_anchor(&acm->delayed);
+			if (!urb)
+				break;
+			wb = urb->context;
+			wb->use = 0;
+			usb_autopm_put_interface_async(acm->control);
+		}
+
 		usb_kill_urb(acm->ctrlurb);
 		for (i = 0; i < ACM_NW; i++)
 			usb_kill_urb(acm->wb[i].urb);
 		for (i = 0; i < acm->rx_buflimit; i++)
 			usb_kill_urb(acm->read_urbs[i]);
 		acm->control->needs_remote_wakeup = 0;
-		usb_autopm_put_interface(acm->control);
+		if (!pm_err)
+			usb_autopm_put_interface(acm->control);
 	}
 	mutex_unlock(&acm->mutex);
 }
@@ -632,14 +659,17 @@ static int acm_tty_write(struct tty_struct *tty,
 	memcpy(wb->buf, buf, count);
 	wb->len = count;
 
-	usb_autopm_get_interface_async(acm->control);
+	stat = usb_autopm_get_interface_async(acm->control);
+	if (stat) {
+		wb->use = 0;
+		spin_unlock_irqrestore(&acm->write_lock, flags);
+		return stat;
+	}
+
 	if (acm->susp_count) {
-		if (!acm->delayed_wb)
-			acm->delayed_wb = wb;
-		else
-			usb_autopm_put_interface_async(acm->control);
+		usb_anchor_urb(wb->urb, &acm->delayed);
 		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return count;	/* A white lie */
+		return count;
 	}
 	usb_mark_last_busy(acm->dev);
 
@@ -845,11 +875,12 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
-	if (!newline.dwDTERate) {
+	if (C_BAUD(tty) == B0) {
 		newline.dwDTERate = acm->line.dwDTERate;
 		newctrl &= ~ACM_CTRL_DTR;
-	} else
+	} else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
 		newctrl |=  ACM_CTRL_DTR;
+	}
 
 	if (newctrl != acm->ctrlout)
 		acm_set_control(acm, acm->ctrlout = newctrl);
@@ -1048,10 +1079,11 @@ next_desc:
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
-		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev, "no interfaces\n");
-			return -ENODEV;
-		}
+	}
+
+	if (!control_interface || !data_interface) {
+		dev_dbg(&intf->dev, "no interfaces\n");
+		return -ENODEV;
 	}
 
 	if (data_interface_num != call_interface_num)
@@ -1176,6 +1208,7 @@ made_compressed_probe:
 		acm->bInterval = epread->bInterval;
 	tty_port_init(&acm->port);
 	acm->port.ops = &acm_port_ops;
+	init_usb_anchor(&acm->delayed);
 
 	buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
@@ -1325,6 +1358,7 @@ alloc_fail8:
 				&dev_attr_wCountryCodes);
 		device_remove_file(&acm->control->dev,
 				&dev_attr_iCountryCodeRelDate);
+		kfree(acm->country_codes);
 	}
 	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
 alloc_fail7:
@@ -1420,18 +1454,15 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 	struct acm *acm = usb_get_intfdata(intf);
 	int cnt;
 
+	spin_lock_irq(&acm->read_lock);
+	spin_lock(&acm->write_lock);
 	if (PMSG_IS_AUTO(message)) {
-		int b;
-
-		spin_lock_irq(&acm->write_lock);
-		b = acm->transmitting;
-		spin_unlock_irq(&acm->write_lock);
-		if (b)
+		if (acm->transmitting) {
+			spin_unlock(&acm->write_lock);
+			spin_unlock_irq(&acm->read_lock);
 			return -EBUSY;
+		}
 	}
-
-	spin_lock_irq(&acm->read_lock);
-	spin_lock(&acm->write_lock);
 	cnt = acm->susp_count++;
 	spin_unlock(&acm->write_lock);
 	spin_unlock_irq(&acm->read_lock);
@@ -1439,8 +1470,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 	if (cnt)
 		return 0;
 
-	if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags))
-		stop_data_traffic(acm);
+	stop_data_traffic(acm);
 
 	return 0;
 }
@@ -1448,29 +1478,24 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 static int acm_resume(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
-	struct acm_wb *wb;
+	struct urb *urb;
 	int rv = 0;
-	int cnt;
 
 	spin_lock_irq(&acm->read_lock);
-	acm->susp_count -= 1;
-	cnt = acm->susp_count;
-	spin_unlock_irq(&acm->read_lock);
+	spin_lock(&acm->write_lock);
 
-	if (cnt)
-		return 0;
+	if (--acm->susp_count)
+		goto out;
 
 	if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) {
-		rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
-
-		spin_lock_irq(&acm->write_lock);
-		if (acm->delayed_wb) {
-			wb = acm->delayed_wb;
-			acm->delayed_wb = NULL;
-			spin_unlock_irq(&acm->write_lock);
-			acm_start_wb(acm, wb);
-		} else {
-			spin_unlock_irq(&acm->write_lock);
+		rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC);
+
+		for (;;) {
+			urb = usb_get_from_anchor(&acm->delayed);
+			if (!urb)
+				break;
+
+			acm_start_wb(acm, urb->context);
 		}
 
 		/*
@@ -1478,12 +1503,14 @@ static int acm_resume(struct usb_interface *intf)
 		 * do the write path at all cost
 		 */
 		if (rv < 0)
-			goto err_out;
+			goto out;
 
-		rv = acm_submit_read_urbs(acm, GFP_NOIO);
+		rv = acm_submit_read_urbs(acm, GFP_ATOMIC);
 	}
+out:
+	spin_unlock(&acm->write_lock);
+	spin_unlock_irq(&acm->read_lock);
 
-err_out:
 	return rv;
 }
 
@@ -1556,17 +1583,32 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x2184, 0x001c) },	/* GW Instek AFG-2225 */
 	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
 	},
 	/* Motorola H24 HSPA module: */
 	{ USB_DEVICE(0x22b8, 0x2d91) }, /* modem                                */
-	{ USB_DEVICE(0x22b8, 0x2d92) }, /* modem           + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port                      */
-	{ USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d96) }, /* modem                         + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d97) }, /* modem           + diagnostics + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port               + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */
+	{ USB_DEVICE(0x22b8, 0x2d92),   /* modem           + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d93),   /* modem + AT port                      */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d95),   /* modem + AT port + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d96),   /* modem                         + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d97),   /* modem           + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d99),   /* modem + AT port               + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d9a),   /* modem + AT port + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
 
 	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
 	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 0f76e4a..1683ac1 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -117,7 +117,7 @@ struct acm {
 	unsigned int throttled:1;			/* actually throttled */
 	unsigned int throttle_req:1;			/* throttle requested */
 	u8 bInterval;
-	struct acm_wb *delayed_wb;			/* write queued for a device about to be woken */
+	struct usb_anchor delayed;			/* writes queued for a device about to be woken */
 };
 
 #define CDC_DATA_INTERFACE_TYPE	0x0a
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 6524383..98cb096 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -201,6 +201,17 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 			if (n == 0)
 				n = 9;	/* 32 ms = 2^(9-1) uframes */
 			j = 16;
+
+			/*
+			 * Adjust bInterval for quirked devices.
+			 * This quirk fixes bIntervals reported in
+			 * linear microframes.
+			 */
+			if (to_usb_device(ddev)->quirks &
+				USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+				n = clamp(fls(d->bInterval), i, j);
+				i = j = n;
+			}
 			break;
 		default:		/* USB_SPEED_FULL or _LOW */
 			/* For low-speed, 10 ms is the official minimum.
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 71dc5d7..31ffd84 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1413,7 +1413,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	u = (is_in ? URB_DIR_IN : URB_DIR_OUT);
 	if (uurb->flags & USBDEVFS_URB_ISO_ASAP)
 		u |= URB_ISO_ASAP;
-	if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK)
+	if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK && is_in)
 		u |= URB_SHORT_NOT_OK;
 	if (uurb->flags & USBDEVFS_URB_NO_FSBR)
 		u |= URB_NO_FSBR;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 689433c..bfddeb3 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -959,8 +959,7 @@ EXPORT_SYMBOL_GPL(usb_deregister);
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
  *
- * The caller must hold @intf's device's lock, but not its pm_mutex
- * and not @intf->dev.sem.
+ * The caller must hold @intf's device's lock, but not @intf's lock.
  */
 void usb_forced_unbind_intf(struct usb_interface *intf)
 {
@@ -973,16 +972,37 @@ void usb_forced_unbind_intf(struct usb_interface *intf)
 	intf->needs_binding = 1;
 }
 
+/*
+ * Unbind drivers for @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set, for example by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->dev.driver && intf->needs_binding)
+				usb_forced_unbind_intf(intf);
+		}
+	}
+}
+
 /* Delayed forced unbinding of a USB interface driver and scan
  * for rebinding.
  *
- * The caller must hold @intf's device's lock, but not its pm_mutex
- * and not @intf->dev.sem.
+ * The caller must hold @intf's device's lock, but not @intf's lock.
  *
  * Note: Rebinds will be skipped if a system sleep transition is in
  * progress and the PM "complete" callback hasn't occurred yet.
  */
-void usb_rebind_intf(struct usb_interface *intf)
+static void usb_rebind_intf(struct usb_interface *intf)
 {
 	int rc;
 
@@ -999,68 +1019,66 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 }
 
-#ifdef CONFIG_PM
-
-/* Unbind drivers for @udev's interfaces that don't support suspend/resume
- * There is no check for reset_resume here because it can be determined
- * only during resume whether reset_resume is needed.
+/*
+ * Rebind drivers to @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set.
  *
  * The caller must hold @udev's device lock.
  */
-static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
+static void rebind_marked_interfaces(struct usb_device *udev)
 {
 	struct usb_host_config	*config;
 	int			i;
 	struct usb_interface	*intf;
-	struct usb_driver	*drv;
 
 	config = udev->actconfig;
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			intf = config->interface[i];
-
-			if (intf->dev.driver) {
-				drv = to_usb_driver(intf->dev.driver);
-				if (!drv->suspend || !drv->resume)
-					usb_forced_unbind_intf(intf);
-			}
+			if (intf->needs_binding)
+				usb_rebind_intf(intf);
 		}
 	}
 }
 
-/* Unbind drivers for @udev's interfaces that failed to support reset-resume.
- * These interfaces have the needs_binding flag set by usb_resume_interface().
+/*
+ * Unbind all of @udev's marked interfaces and then rebind all of them.
+ * This ordering is necessary because some drivers claim several interfaces
+ * when they are first probed.
  *
  * The caller must hold @udev's device lock.
  */
-static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev)
+void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev)
 {
-	struct usb_host_config	*config;
-	int			i;
-	struct usb_interface	*intf;
-
-	config = udev->actconfig;
-	if (config) {
-		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
-			intf = config->interface[i];
-			if (intf->dev.driver && intf->needs_binding)
-				usb_forced_unbind_intf(intf);
-		}
-	}
+	unbind_marked_interfaces(udev);
+	rebind_marked_interfaces(udev);
 }
 
-static void do_rebind_interfaces(struct usb_device *udev)
+#ifdef CONFIG_PM
+
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
 {
 	struct usb_host_config	*config;
 	int			i;
 	struct usb_interface	*intf;
+	struct usb_driver	*drv;
 
 	config = udev->actconfig;
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			intf = config->interface[i];
-			if (intf->needs_binding)
-				usb_rebind_intf(intf);
+
+			if (intf->dev.driver) {
+				drv = to_usb_driver(intf->dev.driver);
+				if (!drv->suspend || !drv->resume)
+					usb_forced_unbind_intf(intf);
+			}
 		}
 	}
 }
@@ -1389,7 +1407,7 @@ int usb_resume_complete(struct device *dev)
 	 * whose needs_binding flag is set
 	 */
 	if (udev->state != USB_STATE_NOTATTACHED)
-		do_rebind_interfaces(udev);
+		rebind_marked_interfaces(udev);
 	return 0;
 }
 
@@ -1411,7 +1429,7 @@ int usb_resume(struct device *dev, pm_message_t msg)
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
-		unbind_no_reset_resume_drivers_interfaces(udev);
+		unbind_marked_interfaces(udev);
 	}
 
 	/* Avoid PM error messages for devices disconnected while suspended
@@ -1752,10 +1770,13 @@ int usb_runtime_suspend(struct device *dev)
 	if (status == -EAGAIN || status == -EBUSY)
 		usb_mark_last_busy(udev);
 
-	/* The PM core reacts badly unless the return code is 0,
-	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
+	/*
+	 * The PM core reacts badly unless the return code is 0,
+	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error
+	 * (except for root hubs, because they don't suspend through
+	 * an upstream port like other USB devices).
 	 */
-	if (status != 0)
+	if (status != 0 && udev->parent)
 		return -EBUSY;
 	return status;
 }
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b9d3c43..5e1a179 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -75,7 +75,7 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 				PCI_SLOT(companion->devfn) != slot)
 			continue;
 		companion_hcd = pci_get_drvdata(companion);
-		if (!companion_hcd)
+		if (!companion_hcd || !companion_hcd->self.root_hub)
 			continue;
 		fn(pdev, hcd, companion, companion_hcd);
 	}
@@ -377,6 +377,8 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev)
 	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
 			hcd->driver->shutdown) {
 		hcd->driver->shutdown(hcd);
+		if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
+			free_irq(hcd->irq, hcd);
 		pci_disable_device(dev);
 	}
 }
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bf21a21..830063c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1677,9 +1677,9 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	 * and no one may trigger the above deadlock situation when
 	 * running complete() in tasklet.
 	 */
-	local_irq_save_nort(flags);
+	local_irq_save(flags);
 	urb->complete(urb);
-	local_irq_restore_nort(flags);
+	local_irq_restore(flags);
 
 	atomic_dec(&urb->use_count);
 	if (unlikely(atomic_read(&urb->reject)))
@@ -2053,6 +2053,8 @@ int usb_alloc_streams(struct usb_interface *interface,
 		return -EINVAL;
 	if (dev->speed != USB_SPEED_SUPER)
 		return -EINVAL;
+	if (dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
 
 	/* Streams only apply to bulk endpoints. */
 	for (i = 0; i < num_eps; i++)
@@ -2331,7 +2333,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 	 * when the first handler doesn't use it.  So let's just
 	 * assume it's never used.
 	 */
-	local_irq_save_nort(flags);
+	local_irq_save(flags);
 
 	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
 		rc = IRQ_NONE;
@@ -2340,7 +2342,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 	else
 		rc = IRQ_HANDLED;
 
-	local_irq_restore_nort(flags);
+	local_irq_restore(flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3670086..420bf9b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -891,6 +891,25 @@ static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
 	if (!hub_is_superspeed(hub->hdev))
 		return -EINVAL;
 
+	ret = hub_port_status(hub, port1, &portstatus, &portchange);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
+	 * Controller [1022:7814] will have spurious result making the following
+	 * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
+	 * as high-speed device if we set the usb 3.0 port link state to
+	 * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
+	 * check the state here to avoid the bug.
+	 */
+	if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_RX_DETECT) {
+		dev_dbg(&hub->ports[port1 - 1]->dev,
+			 "Not disabling port; link state is RxDetect\n");
+		return ret;
+	}
+
 	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
 	if (ret)
 		return ret;
@@ -1152,7 +1171,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			/* Tell khubd to disconnect the device or
 			 * check for a new connection
 			 */
-			if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT))
 				set_bit(port1, hub->change_bits);
 
 		} else if (portstatus & USB_PORT_STAT_ENABLE) {
@@ -1685,11 +1705,28 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 * - Change autosuspend delay of hub can avoid unnecessary auto
 	 *   suspend timer for hub, also may decrease power consumption
 	 *   of USB bus.
+	 *
+	 * - If user has indicated to prevent autosuspend by passing
+	 *   usbcore.autosuspend = -1 then keep autosuspend disabled.
+	 */
+#ifdef CONFIG_PM_RUNTIME
+	if (hdev->dev.power.autosuspend_delay >= 0)
+		pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+#endif
+
+	/*
+	 * Hubs have proper suspend/resume support, except for root hubs
+	 * where the controller driver doesn't have bus_suspend and
+	 * bus_resume methods.
 	 */
-	pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+	if (hdev->parent) {		/* normal device */
+		usb_enable_autosuspend(hdev);
+	} else {			/* root hub */
+		const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver;
 
-	/* Hubs have proper suspend/resume support. */
-	usb_enable_autosuspend(hdev);
+		if (drv->bus_suspend && drv->bus_resume)
+			usb_enable_autosuspend(hdev);
+	}
 
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
@@ -1921,8 +1958,10 @@ void usb_set_device_state(struct usb_device *udev,
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				wakeup = udev->actconfig->desc.bmAttributes
-					 & USB_CONFIG_ATT_WAKEUP;
+				wakeup = (udev->quirks &
+					USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+					udev->actconfig->desc.bmAttributes &
+					USB_CONFIG_ATT_WAKEUP;
 			else
 				wakeup = 0;
 		}
@@ -3138,6 +3177,43 @@ static int finish_port_resume(struct usb_device *udev)
 }
 
 /*
+ * There are some SS USB devices which take longer time for link training.
+ * XHCI specs 4.19.4 says that when Link training is successful, port
+ * sets CSC bit to 1. So if SW reads port status before successful link
+ * training, then it will not find device to be present.
+ * USB Analyzer log with such buggy devices show that in some cases
+ * device switch on the RX termination after long delay of host enabling
+ * the VBUS. In few other cases it has been seen that device fails to
+ * negotiate link training in first attempt. It has been
+ * reported till now that few devices take as long as 2000 ms to train
+ * the link after host enabling its VBUS and termination. Following
+ * routine implements a 2000 ms timeout for link training. If in a case
+ * link trains before timeout, loop will exit earlier.
+ *
+ * FIXME: If a device was connected before suspend, but was removed
+ * while system was asleep, then the loop in the following routine will
+ * only exit at timeout.
+ *
+ * This routine should only be called when persist is enabled for a SS
+ * device.
+ */
+static int wait_for_ss_port_enable(struct usb_device *udev,
+		struct usb_hub *hub, int *port1,
+		u16 *portchange, u16 *portstatus)
+{
+	int status = 0, delay_ms = 0;
+
+	while (delay_ms < 2000) {
+		if (status || *portstatus & USB_PORT_STAT_CONNECTION)
+			break;
+		msleep(20);
+		delay_ms += 20;
+		status = hub_port_status(hub, *port1, portstatus, portchange);
+	}
+	return status;
+}
+
+/*
  * usb_port_resume - re-activate a suspended usb device's upstream port
  * @udev: device to re-activate, not a root hub
  * Context: must be able to sleep; device not locked; pm locks held
@@ -3239,6 +3315,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	clear_bit(port1, hub->busy_bits);
 
+	if (udev->persist_enabled && hub_is_superspeed(hub->hdev))
+		status = wait_for_ss_port_enable(udev, hub, &port1, &portchange,
+				&portstatus);
+
 	status = check_port_resume_type(udev,
 			hub, port1, status, portchange, portstatus);
 	if (status == 0)
@@ -4267,6 +4347,9 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 	struct usb_qualifier_descriptor	*qual;
 	int				status;
 
+	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
+		return;
+
 	qual = kmalloc (sizeof *qual, GFP_KERNEL);
 	if (qual == NULL)
 		return;
@@ -4655,9 +4738,10 @@ static void hub_events(void)
 
 		hub = list_entry(tmp, struct usb_hub, event_list);
 		kref_get(&hub->kref);
+		hdev = hub->hdev;
+		usb_get_dev(hdev);
 		spin_unlock_irq(&hub_event_lock);
 
-		hdev = hub->hdev;
 		hub_dev = hub->intfdev;
 		intf = to_usb_interface(hub_dev);
 		dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
@@ -4870,6 +4954,7 @@ static void hub_events(void)
 		usb_autopm_put_interface(intf);
  loop_disconnected:
 		usb_unlock_device(hdev);
+		usb_put_dev(hdev);
 		kref_put(&hub->kref, hub_release);
 
         } /* end while (1) */
@@ -5308,10 +5393,11 @@ int usb_reset_device(struct usb_device *udev)
 				else if (cintf->condition ==
 						USB_INTERFACE_BOUND)
 					rebind = 1;
+				if (rebind)
+					cintf->needs_binding = 1;
 			}
-			if (ret == 0 && rebind)
-				usb_rebind_intf(cintf);
 		}
+		usb_unbind_and_rebind_marked_interfaces(udev);
 	}
 
 	usb_autosuspend_device(udev);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 1053eb6..aa77595 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Microsoft Wireless Laser Mouse 6000 Receiver */
+	{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Microsoft LifeCam-VX700 v2.0 */
 	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -92,6 +95,16 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Elan Touchscreen */
+	{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -147,6 +160,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* SKYMEDI USB_DRIVE */
 	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Razer - Razer Blade Keyboard */
+	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
+			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+
 	/* BUILDWIN Photo Frame */
 	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
 			USB_QUIRK_HONOR_BNUMINTERFACES },
@@ -154,6 +171,13 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* USB3503 */
+	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	{ }  /* terminating entry must be last */
 };
 
@@ -162,6 +186,10 @@ static const struct usb_device_id usb_interface_quirk_list[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
 	  .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	{ }  /* terminating entry must be last */
 };
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 8238577..0923add7 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -55,7 +55,7 @@ extern int usb_match_one_id_intf(struct usb_device *dev,
 extern int usb_match_device(struct usb_device *dev,
 			    const struct usb_device_id *id);
 extern void usb_forced_unbind_intf(struct usb_interface *intf);
-extern void usb_rebind_intf(struct usb_interface *intf);
+extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev);
 
 extern int usb_hub_claim_port(struct usb_device *hdev, unsigned port,
 		struct dev_state *owner);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 474162e..6adf845 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -581,12 +581,6 @@ static int dwc3_remove(struct platform_device *pdev)
 {
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
 
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-
-	pm_runtime_put(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-
 	dwc3_debugfs_exit(dwc);
 
 	switch (dwc->dr_mode) {
@@ -607,8 +601,15 @@ static int dwc3_remove(struct platform_device *pdev)
 
 	dwc3_event_buffers_cleanup(dwc);
 	dwc3_free_event_buffers(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+
 	dwc3_core_exit(dwc);
 
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f8af8d4..546e67a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -815,15 +815,15 @@ struct dwc3_event_depevt {
  *	12	- VndrDevTstRcved
  * @reserved15_12: Reserved, not used
  * @event_info: Information about this event
- * @reserved31_24: Reserved, not used
+ * @reserved31_25: Reserved, not used
  */
 struct dwc3_event_devt {
 	u32	one_bit:1;
 	u32	device_event:7;
 	u32	type:4;
 	u32	reserved15_12:4;
-	u32	event_info:8;
-	u32	reserved31_24:8;
+	u32	event_info:9;
+	u32	reserved31_25:7;
 } __packed;
 
 /**
@@ -856,6 +856,19 @@ union dwc3_event {
 	struct dwc3_event_gevt		gevt;
 };
 
+/**
+ * struct dwc3_gadget_ep_cmd_params - representation of endpoint command
+ * parameters
+ * @param2: third parameter
+ * @param1: second parameter
+ * @param0: first parameter
+ */
+struct dwc3_gadget_ep_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
 /*
  * DWC3 Features to be used as Driver Data
  */
@@ -881,11 +894,31 @@ static inline void dwc3_host_exit(struct dwc3 *dwc)
 #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_get_link_state(struct dwc3 *dwc);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
 { return 0; }
 static inline void dwc3_gadget_exit(struct dwc3 *dwc)
 { }
+static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{ return 0; }
+static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{ return 0; }
+static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
+		enum dwc3_link_state state)
+{ return 0; }
+
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{ return 0; }
+static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
+		int cmd, u32 param)
+{ return 0; }
 #endif
 
 /* power management interface */
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 7f7ea62..2a0422b 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -592,9 +592,9 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	if (omap->extcon_id_dev.edev)
 		extcon_unregister_interest(&omap->extcon_id_dev);
 	dwc3_omap_disable_irqs(omap);
+	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
 
 	return 0;
 }
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 056da97..4a1922c 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -251,7 +251,7 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
-	__dwc3_gadget_ep_set_halt(dep, 1);
+	__dwc3_gadget_ep_set_halt(dep, 1, false);
 	dep->flags = DWC3_EP_ENABLED;
 	dwc->delayed_status = false;
 
@@ -461,7 +461,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 				return -EINVAL;
 			if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
 				break;
-			ret = __dwc3_gadget_ep_set_halt(dep, set);
+			ret = __dwc3_gadget_ep_set_halt(dep, set, true);
 			if (ret)
 				return -EINVAL;
 			break;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 02e44fc..d19564d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -532,12 +532,11 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		if (!usb_endpoint_xfer_isoc(desc))
 			return 0;
 
-		memset(&trb_link, 0, sizeof(trb_link));
-
 		/* Link TRB for ISOC. The HWO bit is never reset */
 		trb_st_hw = &dep->trb_pool[0];
 
 		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		memset(trb_link, 0, sizeof(*trb_link));
 
 		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
@@ -586,6 +585,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	dwc3_remove_requests(dwc, dep);
 
+	/* make sure HW endpoint isn't stalled */
+	if (dep->flags & DWC3_EP_STALL)
+		__dwc3_gadget_ep_set_halt(dep, 0, false);
+
 	reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 	reg &= ~DWC3_DALEPENA_EP(dep->number);
 	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
@@ -884,8 +887,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 
 				if (i == (request->num_mapped_sgs - 1) ||
 						sg_is_last(s)) {
-					if (list_is_last(&req->list,
-							&dep->request_list))
+					if (list_empty(&dep->request_list))
 						last_one = true;
 					chain = false;
 				}
@@ -903,6 +905,9 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 				if (last_one)
 					break;
 			}
+
+			if (last_one)
+				break;
 		} else {
 			dma = req->request.dma;
 			length = req->request.length;
@@ -1182,7 +1187,7 @@ out0:
 	return ret;
 }
 
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 {
 	struct dwc3_gadget_ep_cmd_params	params;
 	struct dwc3				*dwc = dep->dwc;
@@ -1191,6 +1196,14 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
 	memset(&params, 0x00, sizeof(params));
 
 	if (value) {
+		if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
+				(!list_empty(&dep->req_queued) ||
+				 !list_empty(&dep->request_list)))) {
+			dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+					dep->name);
+			return -EAGAIN;
+		}
+
 		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_SETSTALL, &params);
 		if (ret)
@@ -1230,7 +1243,7 @@ static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
 		goto out;
 	}
 
-	ret = __dwc3_gadget_ep_set_halt(dep, value);
+	ret = __dwc3_gadget_ep_set_halt(dep, value, false);
 out:
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -1250,7 +1263,7 @@ static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
 	if (dep->number == 0 || dep->number == 1)
 		return dwc3_gadget_ep0_set_halt(ep, 1);
 	else
-		return dwc3_gadget_ep_set_halt(ep, 1);
+		return __dwc3_gadget_ep_set_halt(dep, 1, false);
 }
 
 /* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index febe1aa..ac625582 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -56,12 +56,6 @@ struct dwc3;
 /* DEPXFERCFG parameter 0 */
 #define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
 
-struct dwc3_gadget_ep_cmd_params {
-	u32	param2;
-	u32	param1;
-	u32	param0;
-};
-
 /* -------------------------------------------------------------------------- */
 
 #define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
@@ -85,19 +79,13 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status);
 
-int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
-int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event);
 void dwc3_ep0_out_start(struct dwc3 *dwc);
 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags);
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 48cddf3..53c95e9 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -424,7 +424,7 @@ config USB_GOKU
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	help
 	  This is a USB device driver for EG20T PCH.
@@ -445,6 +445,7 @@ config USB_EG20T
 	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
+	  This driver can be used with Intel's Quark X1000 SOC platform
 #
 # LAST -- dummy/emulated controller
 #
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 4cc4fd6..e3101ce 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -871,12 +871,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)
@@ -885,10 +883,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*
@@ -1710,16 +1708,6 @@ static int at91udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (pdev->num_resources != 2) {
-		DBG("invalid num_resources\n");
-		return -ENODEV;
-	}
-	if ((pdev->resource[0].flags != IORESOURCE_MEM)
-			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
-		DBG("invalid resource type\n");
-		return -ENODEV;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENXIO;
@@ -1791,14 +1779,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
@@ -1806,7 +1804,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
@@ -1859,6 +1857,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);
@@ -1907,6 +1912,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 2cb52e0..1e53092 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1827,12 +1827,12 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
-	udc->driver = NULL;
-
 	clk_disable_unprepare(udc->hclk);
 	clk_disable_unprepare(udc->pclk);
 
-	DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+	DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name);
+
+	udc->driver = NULL;
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index ab1065a..3384486 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -430,11 +430,12 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (acm->notify->driver_data) {
 			VDBG(cdev, "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
-		} else {
-			VDBG(cdev, "init acm ctrl interface %d\n", intf);
+		}
+
+		if (!acm->notify->desc)
 			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
 				return -EINVAL;
-		}
+
 		usb_ep_enable(acm->notify);
 		acm->notify->driver_data = acm;
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index fd2fe19..c3067f4 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1282,7 +1282,7 @@ static void ffs_data_put(struct ffs_data *ffs)
 		pr_info("%s(): freeing\n", __func__);
 		ffs_data_clear(ffs);
 		BUG_ON(waitqueue_active(&ffs->ev.waitq) ||
-		       swaitqueue_active(&ffs->ep0req_completion.wait));
+		       waitqueue_active(&ffs->ep0req_completion.wait));
 		kfree(ffs->dev_name);
 		kfree(ffs);
 	}
@@ -1389,11 +1389,13 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 	ffs->ep0req->context = ffs;
 
 	lang = ffs->stringtabs;
-	for (lang = ffs->stringtabs; *lang; ++lang) {
-		struct usb_string *str = (*lang)->strings;
-		int id = first_id;
-		for (; str->s; ++id, ++str)
-			str->id = id;
+	if (lang) {
+		for (; *lang; ++lang) {
+			struct usb_string *str = (*lang)->strings;
+			int id = first_id;
+			for (; str->s; ++id, ++str)
+				str->id = id;
+		}
 	}
 
 	ffs->gadget = cdev->gadget;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 1033ecc..4ac9e99 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -340,7 +340,7 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len)
 	spin_unlock_irq (&epdata->dev->lock);
 
 	if (likely (value == 0)) {
-		value = swait_event_interruptible (done.wait, done.done);
+		value = wait_event_interruptible (done.wait, done.done);
 		if (value != 0) {
 			spin_lock_irq (&epdata->dev->lock);
 			if (likely (epdata->ep != NULL)) {
@@ -349,7 +349,7 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len)
 				usb_ep_dequeue (epdata->ep, epdata->req);
 				spin_unlock_irq (&epdata->dev->lock);
 
-				swait_event (done.wait, done.done);
+				wait_event (done.wait, done.done);
 				if (epdata->status == -ECONNRESET)
 					epdata->status = -EINTR;
 			} else {
@@ -1504,7 +1504,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		}
 		break;
 
-#ifndef	CONFIG_USB_GADGET_PXA25X
+#ifndef	CONFIG_USB_PXA25X
 	/* PXA automagically handles this request too */
 	case USB_REQ_GET_CONFIGURATION:
 		if (ctrl->bRequestType != 0x80)
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 24174e1..ea00b27 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
  * @setup_data:		Received setup data
  * @phys_addr:		of device memory
  * @base_addr:		for mapped device memory
+ * @bar:		Indicates which PCI BAR for USB regs
  * @irq:		IRQ line for the device
  * @cfg_data:		current cfg, intf, and alt in use
  * @vbus_gpio:		GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
 	struct usb_ctrlrequest		setup_data;
 	unsigned long			phys_addr;
 	void __iomem			*base_addr;
+	unsigned			bar;
 	unsigned			irq;
 	struct pch_udc_cfg_data		cfg_data;
 	struct pch_vbus_gpio_data	vbus_gpio;
 };
 #define to_pch_udc(g)	(container_of((g), struct pch_udc_dev, gadget))
 
+#define PCH_UDC_PCI_BAR_QUARK_X1000	0
 #define PCH_UDC_PCI_BAR			1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC	0x0939
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
 #define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
 		iounmap(dev->base_addr);
 	if (dev->mem_region)
 		release_mem_region(dev->phys_addr,
-				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+				   pci_resource_len(pdev, dev->bar));
 	if (dev->active)
 		pci_disable_device(pdev);
 	kfree(dev);
@@ -3145,9 +3149,15 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	dev->active = 1;
 	pci_set_drvdata(pdev, dev);
 
+	/* Determine BAR based on PCI ID */
+	if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+		dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+	else
+		dev->bar = PCH_UDC_PCI_BAR;
+
 	/* PCI resource allocation */
-	resource = pci_resource_start(pdev, 1);
-	len = pci_resource_len(pdev, 1);
+	resource = pci_resource_start(pdev, dev->bar);
+	len = pci_resource_len(pdev, dev->bar);
 
 	if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
 		dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3213,6 +3223,12 @@ finished:
 
 static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
 	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+			   PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
+	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 0ff3339..d9e15e8 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1613,7 +1613,7 @@ static struct se_wwn *usbg_make_tport(
 		return ERR_PTR(-ENOMEM);
 	}
 	tport->tport_wwpn = wwpn;
-	snprintf(tport->tport_name, sizeof(tport->tport_name), wnn_name);
+	snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name);
 	return &tport->tport_wwn;
 }
 
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 59891b1..a4aa923 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -455,6 +455,11 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
+	if (!udc->driver) {
+		dev_err(dev, "soft-connect without a gadget driver\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (sysfs_streq(buf, "connect")) {
 		usb_gadget_udc_start(udc->gadget, udc->driver);
 		usb_gadget_connect(udc->gadget);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 0deb9d6..d31814c 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -280,7 +280,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	ss_opts->isoc_interval = gzero_options.isoc_interval;
 	ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
 	ss_opts->isoc_mult = gzero_options.isoc_mult;
-	ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 
 	func_ss = usb_get_function(func_inst_ss);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f2407b2..ce65c4e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -261,7 +261,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 		break;
 	}
 
-	if (pdata->have_sysif_regs && pdata->controller_ver &&
+	if (pdata->have_sysif_regs &&
+	    pdata->controller_ver > FSL_USB_VER_1_6 &&
 	    (phy_mode == FSL_USB2_PHY_ULPI)) {
 		/* check PHY_CLK_VALID to get phy clk valid */
 		if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 784f624..51b1f4e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -968,8 +968,6 @@ rescan:
 	}
 
 	qh->exception = 1;
-	if (ehci->rh_state < EHCI_RH_RUNNING)
-		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
 		WARN_ON(!list_empty(&qh->qtd_list));
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1bb85be..7ba8615 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1241,7 +1241,7 @@ static int ehci_hub_control (
 			if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
 				spin_unlock_irqrestore(&ehci->lock, flags);
 				retval = ehset_single_step_set_feature(hcd,
-									wIndex);
+								wIndex + 1);
 				spin_lock_irqsave(&ehci->lock, flags);
 				break;
 			}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 3e86bf4..ca7b964 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -35,6 +35,21 @@ static const char hcd_name[] = "ehci-pci";
 #define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
 
 /*-------------------------------------------------------------------------*/
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939
+static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
+{
+	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
+}
+
+/*
+ * 0x84 is the offset of in/out threshold register,
+ * and it is the same offset as the register of 'hostpc'.
+ */
+#define	intel_quark_x1000_insnreg01	hostpc
+
+/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */
+#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD	0x007f007f
 
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
@@ -50,6 +65,16 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	if (!retval)
 		ehci_dbg(ehci, "MWI active\n");
 
+	/* Reset the threshold limit */
+	if (is_intel_quark_x1000(pdev)) {
+		/*
+		 * For the Intel QUARK X1000, raise the I/O threshold to the
+		 * maximum usable value in order to improve performance.
+		 */
+		ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
+			ehci->regs->intel_quark_x1000_insnreg01);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 85dd24e..8ecf164 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1384,6 +1384,10 @@ iso_stream_schedule (
 
 	now = ehci_read_frame_index(ehci) & (mod - 1);
 
+	/* If needed, initialize last_iso_frame so that this URB will be seen */
+	if (ehci->isoc_count == 0)
+		ehci->last_iso_frame = now >> 3;
+
 	/* Typical case: reuse current schedule, stream is still active.
 	 * Hopefully there are no gaps from the host falling behind
 	 * (irq delays etc).  If there are, the behavior depends on
@@ -1493,10 +1497,6 @@ iso_stream_schedule (
 	urb->start_frame = stream->next_uframe;
 	if (!stream->highspeed)
 		urb->start_frame >>= 3;
-
-	/* Make sure scan_isoc() sees these */
-	if (ehci->isoc_count == 0)
-		ehci->last_iso_frame = now >> 3;
 	return 0;
 
  fail:
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 31b81f9..17e698f 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -289,7 +289,7 @@ ohci_dump_roothub (
 	}
 }
 
-static void ohci_dump (struct ohci_hcd *controller, int verbose)
+static void ohci_dump(struct ohci_hcd *controller)
 {
 	ohci_dbg (controller, "OHCI controller state\n");
 
@@ -408,7 +408,7 @@ ohci_dump_ed (const struct ohci_hcd *ohci, const char *label,
 }
 
 #else
-static inline void ohci_dump (struct ohci_hcd *controller, int verbose) {}
+static inline void ohci_dump (struct ohci_hcd *controller) {}
 
 #undef OHCI_VERBOSE_DEBUG
 
@@ -531,15 +531,16 @@ show_list (struct ohci_hcd *ohci, char *buf, size_t count, struct ed *ed)
 static ssize_t fill_async_buffer(struct debug_buffer *buf)
 {
 	struct ohci_hcd		*ohci;
-	size_t			temp;
+	size_t			temp, size;
 	unsigned long		flags;
 
 	ohci = buf->ohci;
+	size = PAGE_SIZE;
 
 	/* display control and bulk lists together, for simplicity */
 	spin_lock_irqsave (&ohci->lock, flags);
-	temp = show_list(ohci, buf->page, buf->count, ohci->ed_controltail);
-	temp += show_list(ohci, buf->page + temp, buf->count - temp,
+	temp = show_list(ohci, buf->page, size, ohci->ed_controltail);
+	temp += show_list(ohci, buf->page + temp, size - temp,
 			  ohci->ed_bulktail);
 	spin_unlock_irqrestore (&ohci->lock, flags);
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b691278..3770fcb 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -78,8 +78,8 @@ static const char	hcd_name [] = "ohci_hcd";
 #include "ohci.h"
 #include "pci-quirks.h"
 
-static void ohci_dump (struct ohci_hcd *ohci, int verbose);
-static void ohci_stop (struct usb_hcd *hcd);
+static void ohci_dump(struct ohci_hcd *ohci);
+static void ohci_stop(struct usb_hcd *hcd);
 
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
@@ -754,7 +754,7 @@ retry:
 		ohci->ed_to_check = NULL;
 	}
 
-	ohci_dump (ohci, 1);
+	ohci_dump(ohci);
 
 	return 0;
 }
@@ -835,7 +835,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 			usb_hc_died(hcd);
 		}
 
-		ohci_dump (ohci, 1);
+		ohci_dump(ohci);
 		ohci_usb_reset (ohci);
 	}
 
@@ -874,13 +874,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	}
 
 	if (ints & OHCI_INTR_WDH) {
-		if (ohci->hcca->done_head == 0) {
-			ints &= ~OHCI_INTR_WDH;
-		} else {
-			spin_lock (&ohci->lock);
-			dl_done_list (ohci);
-			spin_unlock (&ohci->lock);
-		}
+		spin_lock (&ohci->lock);
+		dl_done_list (ohci);
+		spin_unlock (&ohci->lock);
 	}
 
 	if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
@@ -939,7 +935,7 @@ static void ohci_stop (struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 
-	ohci_dump (ohci, 1);
+	ohci_dump(ohci);
 
 	if (quirk_nec(ohci))
 		flush_work(&ohci->nec_work);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2347ab8..dcf5708 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -90,6 +90,24 @@ __acquires(ohci->lock)
 	dl_done_list (ohci);
 	finish_unlinks (ohci, ohci_frame_no(ohci));
 
+	/*
+	 * Some controllers don't handle "global" suspend properly if
+	 * there are unsuspended ports.  For these controllers, put all
+	 * the enabled ports into suspend before suspending the root hub.
+	 */
+	if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) {
+		__hc32 __iomem	*portstat = ohci->regs->roothub.portstatus;
+		int		i;
+		unsigned	temp;
+
+		for (i = 0; i < ohci->num_ports; (++i, ++portstat)) {
+			temp = ohci_readl(ohci, portstat);
+			if ((temp & (RH_PS_PES | RH_PS_PSS)) ==
+					RH_PS_PES)
+				ohci_writel(ohci, RH_PS_PSS, portstat);
+		}
+	}
+
 	/* maybe resume can wake root hub */
 	if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
 		ohci->hc_control |= OHCI_CTRL_RWE;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 659cde1..fd9f77b 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -160,6 +160,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 	}
 
+	ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND;
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index e7f577e..4e9f6a4 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -315,8 +315,7 @@ static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed)
  *  - ED_OPER: when there's any request queued, the ED gets rescheduled
  *    immediately.  HC should be working on them.
  *
- *  - ED_IDLE:  when there's no TD queue. there's no reason for the HC
- *    to care about this ED; safe to disable the endpoint.
+ *  - ED_IDLE: when there's no TD queue or the HC isn't running.
  *
  * When finish_unlinks() runs later, after SOF interrupt, it will often
  * complete one or more URB unlinks before making that state change.
@@ -930,6 +929,10 @@ rescan_all:
 		int			completed, modified;
 		__hc32			*prev;
 
+		/* Is this ED already invisible to the hardware? */
+		if (ed->state == ED_IDLE)
+			goto ed_idle;
+
 		/* only take off EDs that the HC isn't using, accounting for
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
@@ -959,12 +962,20 @@ skip_ed:
 			}
 		}
 
+		/* ED's now officially unlinked, hc doesn't see */
+		ed->state = ED_IDLE;
+		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+			ohci->eds_scheduled--;
+		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
+		ed->hwNextED = 0;
+		wmb();
+		ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE);
+ed_idle:
+
 		/* reentrancy:  if we drop the schedule lock, someone might
 		 * have modified this list.  normally it's just prepending
 		 * entries (which we'd ignore), but paranoia won't hurt.
 		 */
-		*last = ed->ed_next;
-		ed->ed_next = NULL;
 		modified = 0;
 
 		/* unlink urbs as requested, but rescan the list after
@@ -1022,19 +1033,20 @@ rescan_this:
 		if (completed && !list_empty (&ed->td_list))
 			goto rescan_this;
 
-		/* ED's now officially unlinked, hc doesn't see */
-		ed->state = ED_IDLE;
-		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
-			ohci->eds_scheduled--;
-		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
-		ed->hwNextED = 0;
-		wmb ();
-		ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE);
-
-		/* but if there's work queued, reschedule */
-		if (!list_empty (&ed->td_list)) {
-			if (ohci->rh_state == OHCI_RH_RUNNING)
-				ed_schedule (ohci, ed);
+		/*
+		 * If no TDs are queued, take ED off the ed_rm_list.
+		 * Otherwise, if the HC is running, reschedule.
+		 * If not, leave it on the list for further dequeues.
+		 */
+		if (list_empty(&ed->td_list)) {
+			*last = ed->ed_next;
+			ed->ed_next = NULL;
+		} else if (ohci->rh_state == OHCI_RH_RUNNING) {
+			*last = ed->ed_next;
+			ed->ed_next = NULL;
+			ed_schedule(ohci, ed);
+		} else {
+			last = &ed->ed_next;
 		}
 
 		if (modified)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index cc9dd9e..45f8773 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -53,7 +53,7 @@ static int ohci_spear_start(struct usb_hcd *hcd)
 	create_debug_files(ohci);
 
 #ifdef DEBUG
-	ohci_dump(ohci, 1);
+	ohci_dump(ohci);
 #endif
 	return 0;
 }
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index e2e5faa..0b2e58c 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -405,6 +405,8 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
+#define	OHCI_QUIRK_GLOBAL_SUSPEND	0x800		/* must suspend ports */
+
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 463156d..5a45437 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -560,7 +560,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
 	u32 control;
-	u32 fminterval;
+	u32 fminterval = 0;
+	bool no_fminterval = false;
 	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
@@ -570,6 +571,13 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	if (base == NULL)
 		return;
 
+	/*
+	 * ULi M5237 OHCI controller locks the whole system when accessing
+	 * the OHCI_FMINTERVAL offset.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
+		no_fminterval = true;
+
 	control = readl(base + OHCI_CONTROL);
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
@@ -608,7 +616,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	}
 
 	/* software reset of the controller, preserving HcFmInterval */
-	fminterval = readl(base + OHCI_FMINTERVAL);
+	if (!no_fminterval)
+		fminterval = readl(base + OHCI_FMINTERVAL);
+
 	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
 	/* reset requires max 10 us delay */
@@ -617,7 +627,9 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
 			break;
 		udelay(1);
 	}
-	writel(fminterval, base + OHCI_FMINTERVAL);
+
+	if (!no_fminterval)
+		writel(fminterval, base + OHCI_FMINTERVAL);
 
 	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
@@ -645,6 +657,14 @@ static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
 			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
 		},
 	},
+	{
+		/* HASEE E200 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
+			DMI_MATCH(DMI_BOARD_NAME, "E210"),
+			DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
+		},
+	},
 	{ }
 };
 
@@ -654,9 +674,14 @@ static void ehci_bios_handoff(struct pci_dev *pdev,
 {
 	int try_handoff = 1, tried_handoff = 0;
 
-	/* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
-	 * the handoff on its unused controller.  Skip it. */
-	if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
+	/*
+	 * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+	 * the handoff on its unused controller.  Skip it.
+	 *
+	 * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
+	 */
+	if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
+			pdev->device == 0x27cc)) {
 		if (dmi_check_system(ehci_dmi_nohandoff_table))
 			try_handoff = 0;
 	}
@@ -836,6 +861,13 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
 	bool		ehci_found = false;
 	struct pci_dev	*companion = NULL;
 
+	/* Sony VAIO t-series with subsystem device ID 90a8 is not capable of
+	 * switching ports from EHCI to xHCI
+	 */
+	if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY &&
+	    xhci_pdev->subsystem_device == 0x90a8)
+		return;
+
 	/* make sure an intel EHCI controller exists */
 	for_each_pci_dev(companion) {
 		if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index e8b4c56..cd47840 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -470,7 +470,8 @@ static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
 }
 
 /* Updates Link Status for super Speed port */
-static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
 {
 	u32 pls = status_reg & PORT_PLS_MASK;
 
@@ -509,7 +510,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
 		 * in which sometimes the port enters compliance mode
 		 * caused by a delay on the host-device negotiation.
 		 */
-		if (pls == USB_SS_PORT_LS_COMP_MOD)
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
 			pls |= USB_PORT_STAT_CONNECTION;
 	}
 
@@ -668,7 +670,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	}
 	/* Update Port Link State */
 	if (hcd->speed == HCD_USB3) {
-		xhci_hub_report_usb3_link_state(&status, raw_port_status);
+		xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
 		/*
 		 * Verify if all USB3 Ports Have entered U0 already.
 		 * Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 49b8bd0..837c333 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1722,6 +1722,16 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		kfree(cur_cd);
 	}
 
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports && xhci->rh_bw; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
+		}
+	}
+
 	for (i = 1; i < MAX_HC_SLOTS; ++i)
 		xhci_free_virt_device(xhci, i);
 
@@ -1757,16 +1767,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	if (!xhci->rh_bw)
 		goto no_bw;
 
-	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
-	for (i = 0; i < num_ports; i++) {
-		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
-		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
-			struct list_head *ep = &bwt->interval_bw[j].endpoints;
-			while (!list_empty(ep))
-				list_del_init(ep->next);
-		}
-	}
-
 	for (i = 0; i < num_ports; i++) {
 		struct xhci_tt_bw_info *tt, *n;
 		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1af67a2..7dad9e5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -101,6 +101,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
@@ -135,6 +139,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
 			xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -143,9 +151,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
-			pdev->device == 0x0015 &&
-			pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
-			pdev->subsystem_device == 0xc0cd)
+			pdev->device == 0x0015)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -190,6 +196,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct usb_hcd *hcd;
 
 	driver = (struct hc_driver *)id->driver_data;
+
+	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
+	pm_runtime_get_noresume(&dev->dev);
+
 	/* Register the USB 2.0 roothub.
 	 * FIXME: USB core must know to register the USB 2.0 roothub first.
 	 * This is sort of silly, because we could just set the HCD driver flags
@@ -199,7 +209,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	retval = usb_hcd_pci_probe(dev, id);
 
 	if (retval)
-		return retval;
+		goto put_runtime_pm;
 
 	/* USB 2.0 roothub is stored in the PCI device now. */
 	hcd = dev_get_drvdata(&dev->dev);
@@ -228,12 +238,17 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (xhci->quirks & XHCI_LPM_SUPPORT)
 		hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1;
 
+	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
+	pm_runtime_put_noidle(&dev->dev);
+
 	return 0;
 
 put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
 dealloc_usb2_hcd:
 	usb_hcd_pci_remove(dev);
+put_runtime_pm:
+	pm_runtime_put_noidle(&dev->dev);
 	return retval;
 }
 
@@ -268,7 +283,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	if (xhci_compliance_mode_recovery_timer_quirk_check())
 		pdev->no_d3cold = true;
 
-	return xhci_suspend(xhci);
+	return xhci_suspend(xhci, do_wakeup);
 }
 
 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index d9c169f..bb50d30 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -203,7 +203,15 @@ static int xhci_plat_suspend(struct device *dev)
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
-	return xhci_suspend(xhci);
+	/*
+	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
+	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
+	 * only designed for system suspend, device_may_wakeup() is enough
+	 * to dertermine whether host is allowed to do wakeup. Need to
+	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
+	 * also applies to runtime suspend.
+	 */
+	return xhci_suspend(xhci, device_may_wakeup(dev));
 }
 
 static int xhci_plat_resume(struct device *dev)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bfbd80..6f052da 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -552,10 +552,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
+	struct xhci_virt_ep *ep = &dev->eps[ep_index];
 	struct xhci_ring *ep_ring;
 	struct xhci_generic_trb *trb;
-	struct xhci_ep_ctx *ep_ctx;
 	dma_addr_t addr;
+	u64 hw_dequeue;
 
 	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
 			ep_index, stream_id);
@@ -565,56 +566,65 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 				stream_id);
 		return;
 	}
-	state->new_cycle_state = 0;
-	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-			"Finding segment containing stopped TRB.");
-	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
-			dev->eps[ep_index].stopped_trb,
-			&state->new_cycle_state);
-	if (!state->new_deq_seg) {
-		WARN_ON(1);
-		return;
-	}
 
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding endpoint context");
-	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
-	state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+	/* 4.6.9 the css flag is written to the stream context for streams */
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		struct xhci_stream_ctx *ctx =
+			&ep->stream_info->stream_ctx_array[stream_id];
+		hw_dequeue = le64_to_cpu(ctx->stream_ring);
+	} else {
+		struct xhci_ep_ctx *ep_ctx
+			= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+		hw_dequeue = le64_to_cpu(ep_ctx->deq);
+	}
+
+	/* Find virtual address and segment of hardware dequeue pointer */
+	state->new_deq_seg = ep_ring->deq_seg;
+	state->new_deq_ptr = ep_ring->dequeue;
+	while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
+			!= (dma_addr_t)(hw_dequeue & ~0xf)) {
+		next_trb(xhci, ep_ring, &state->new_deq_seg,
+					&state->new_deq_ptr);
+		if (state->new_deq_ptr == ep_ring->dequeue) {
+			WARN_ON(1);
+			return;
+		}
+	}
+	/*
+	 * Find cycle state for last_trb, starting at old cycle state of
+	 * hw_dequeue. If there is only one segment ring, find_trb_seg() will
+	 * return immediately and cannot toggle the cycle state if this search
+	 * wraps around, so add one more toggle manually in that case.
+	 */
+	state->new_cycle_state = hw_dequeue & 0x1;
+	if (ep_ring->first_seg == ep_ring->first_seg->next &&
+			cur_td->last_trb < state->new_deq_ptr)
+		state->new_cycle_state ^= 0x1;
 
 	state->new_deq_ptr = cur_td->last_trb;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Finding segment containing last TRB in TD.");
 	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
-			state->new_deq_ptr,
-			&state->new_cycle_state);
+			state->new_deq_ptr, &state->new_cycle_state);
 	if (!state->new_deq_seg) {
 		WARN_ON(1);
 		return;
 	}
 
+	/* Increment to find next TRB after last_trb. Cycle if appropriate. */
 	trb = &state->new_deq_ptr->generic;
 	if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
 	    (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
 		state->new_cycle_state ^= 0x1;
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
-	/*
-	 * If there is only one segment in a ring, find_trb_seg()'s while loop
-	 * will not run, and it will return before it has a chance to see if it
-	 * needs to toggle the cycle bit.  It can't tell if the stalled transfer
-	 * ended just before the link TRB on a one-segment ring, or if the TD
-	 * wrapped around the top of the ring, because it doesn't have the TD in
-	 * question.  Look for the one-segment case where stalled TRB's address
-	 * is greater than the new dequeue pointer address.
-	 */
-	if (ep_ring->first_seg == ep_ring->first_seg->next &&
-			state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
-		state->new_cycle_state ^= 0x1;
+	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"Cycle state = 0x%x", state->new_cycle_state);
 
-	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 			"New dequeue segment = %p (virtual)",
 			state->new_deq_seg);
@@ -802,7 +812,6 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	if (list_empty(&ep->cancelled_td_list)) {
 		xhci_stop_watchdog_timer_in_irq(xhci, ep);
 		ep->stopped_td = NULL;
-		ep->stopped_trb = NULL;
 		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 		return;
 	}
@@ -870,11 +879,9 @@ remove_finished_td:
 		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
 
-	/* Clear stopped_td and stopped_trb if endpoint is not halted */
-	if (!(ep->ep_state & EP_HALTED)) {
+	/* Clear stopped_td if endpoint is not halted */
+	if (!(ep->ep_state & EP_HALTED))
 		ep->stopped_td = NULL;
-		ep->stopped_trb = NULL;
-	}
 
 	/*
 	 * Drop the lock and complete the URBs in the cancelled TD list.
@@ -1199,9 +1206,8 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 				false);
 		xhci_ring_cmd_db(xhci);
 	} else {
-		/* Clear our internal halted state and restart the ring(s) */
+		/* Clear our internal halted state */
 		xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
-		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
 }
 
@@ -1870,14 +1876,12 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 	ep->ep_state |= EP_HALTED;
 	ep->stopped_td = td;
-	ep->stopped_trb = event_trb;
 	ep->stopped_stream = stream_id;
 
 	xhci_queue_reset_ep(xhci, slot_id, ep_index);
 	xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
 
 	ep->stopped_td = NULL;
-	ep->stopped_trb = NULL;
 	ep->stopped_stream = 0;
 
 	xhci_ring_cmd_db(xhci);
@@ -1959,26 +1963,15 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		 * the ring dequeue pointer or take this TD off any lists yet.
 		 */
 		ep->stopped_td = td;
-		ep->stopped_trb = event_trb;
 		return 0;
 	} else {
-		if (trb_comp_code == COMP_STALL) {
-			/* The transfer is completed from the driver's
-			 * perspective, but we need to issue a set dequeue
-			 * command for this stalled endpoint to move the dequeue
-			 * pointer past the TD.  We can't do that here because
-			 * the halt condition must be cleared first.  Let the
-			 * USB class driver clear the stall later.
-			 */
-			ep->stopped_td = td;
-			ep->stopped_trb = event_trb;
-			ep->stopped_stream = ep_ring->stream_id;
-		} else if (xhci_requires_manual_halt_cleanup(xhci,
-					ep_ctx, trb_comp_code)) {
-			/* Other types of errors halt the endpoint, but the
-			 * class driver doesn't call usb_reset_endpoint() unless
-			 * the error is -EPIPE.  Clear the halted status in the
-			 * xHCI hardware manually.
+		if (trb_comp_code == COMP_STALL ||
+		    xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+						      trb_comp_code)) {
+			/* Issue a reset endpoint command to clear the host side
+			 * halt, followed by a set dequeue command to move the
+			 * dequeue pointer past the TD.
+			 * The class driver clears the device side halt later.
 			 */
 			xhci_cleanup_halted_endpoint(xhci,
 					slot_id, ep_index, ep_ring->stream_id,
@@ -2098,9 +2091,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		else
 			td->urb->actual_length = 0;
 
-		xhci_cleanup_halted_endpoint(xhci,
-			slot_id, ep_index, 0, td, event_trb);
-		return finish_td(xhci, td, event_trb, event, ep, status, true);
+		return finish_td(xhci, td, event_trb, event, ep, status, false);
 	}
 	/*
 	 * Did we transfer any data, despite the errors that might have
@@ -2576,7 +2567,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		 * last TRB of the previous TD. The command completion handle
 		 * will take care the rest.
 		 */
-		if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+		if (!event_seg && (trb_comp_code == COMP_STOP ||
+				   trb_comp_code == COMP_STOP_INVAL)) {
 			ret = 0;
 			goto cleanup;
 		}
@@ -2588,7 +2580,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				 * successful event after a short transfer.
 				 * Ignore it.
 				 */
-				if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && 
+				if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
 						ep_ring->last_td_was_short) {
 					ep_ring->last_td_was_short = false;
 					ret = 0;
@@ -2653,17 +2645,8 @@ cleanup:
 		if (ret) {
 			urb = td->urb;
 			urb_priv = urb->hcpriv;
-			/* Leave the TD around for the reset endpoint function
-			 * to use(but only if it's not a control endpoint,
-			 * since we already queued the Set TR dequeue pointer
-			 * command for stalled control endpoints).
-			 */
-			if (usb_endpoint_xfer_control(&urb->ep->desc) ||
-				(trb_comp_code != COMP_STALL &&
-					trb_comp_code != COMP_BABBLE))
-				xhci_urb_free_priv(xhci, urb_priv);
-			else
-				kfree(urb_priv);
+
+			xhci_urb_free_priv(xhci, urb_priv);
 
 			usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
 			if ((urb->actual_length != urb->transfer_buffer_length &&
@@ -3630,7 +3613,7 @@ static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
 		return 0;
 
 	max_burst = urb->ep->ss_ep_comp.bMaxBurst;
-	return roundup(total_packet_count, max_burst + 1) - 1;
+	return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
 }
 
 /*
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f178f76..e0ccc95 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -35,6 +35,8 @@
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
 /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
 static int link_quirk;
 module_param(link_quirk, int, S_IRUGO | S_IWUSR);
@@ -400,16 +402,16 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 
 #else
 
-static int xhci_try_enable_msi(struct usb_hcd *hcd)
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
 {
 	return 0;
 }
 
-static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
 {
 }
 
-static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
 {
 }
 
@@ -840,13 +842,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 	xhci_set_cmd_ring_deq(xhci);
 }
 
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+	int port_index;
+	__le32 __iomem **port_array;
+	unsigned long flags;
+	u32 t1, t2;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* disble usb3 ports Wake bits*/
+	port_index = xhci->num_usb3_ports;
+	port_array = xhci->usb3_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	/* disble usb2 ports Wake bits*/
+	port_index = xhci->num_usb2_ports;
+	port_array = xhci->usb2_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
  * This is called when the machine transition into S3/S4 mode.
  *
  */
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 {
 	int			rc = 0;
 	unsigned int		delay = XHCI_MAX_HALT_USEC;
@@ -857,6 +893,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	/* Clear root port wake on bits if wakeup not allowed. */
+	if (!do_wakeup)
+		xhci_disable_port_wake_on_bits(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
@@ -926,7 +966,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
  */
 int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 {
-	u32			command, temp = 0;
+	u32			command, temp = 0, status;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
@@ -1045,8 +1085,12 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
  done:
 	if (retval == 0) {
-		usb_hcd_resume_root_hub(hcd);
-		usb_hcd_resume_root_hub(xhci->shared_hcd);
+		/* Resume root hubs only when have pending events. */
+		status = readl(&xhci->op_regs->status);
+		if (status & STS_EINT) {
+			usb_hcd_resume_root_hub(hcd);
+			usb_hcd_resume_root_hub(xhci->shared_hcd);
+		}
 	}
 
 	/*
@@ -2880,64 +2924,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	}
 }
 
-/* Deal with stalled endpoints.  The core should have sent the control message
- * to clear the halt condition.  However, we need to make the xHCI hardware
- * reset its sequence number, since a device will expect a sequence number of
- * zero after the halt condition is cleared.
+/* Called when clearing halted device. The core should have sent the control
+ * message to clear the device halt condition. The host side of the halt should
+ * already be cleared with a reset endpoint command issued when the STALL tx
+ * event was received.
+ *
  * Context: in_interrupt
  */
+
 void xhci_endpoint_reset(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct usb_device *udev;
-	unsigned int ep_index;
-	unsigned long flags;
-	int ret;
-	struct xhci_virt_ep *virt_ep;
 
 	xhci = hcd_to_xhci(hcd);
-	udev = (struct usb_device *) ep->hcpriv;
-	/* Called with a root hub endpoint (or an endpoint that wasn't added
-	 * with xhci_add_endpoint()
-	 */
-	if (!ep->hcpriv)
-		return;
-	ep_index = xhci_get_endpoint_index(&ep->desc);
-	virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
-	if (!virt_ep->stopped_td) {
-		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-			"Endpoint 0x%x not halted, refusing to reset.",
-			ep->desc.bEndpointAddress);
-		return;
-	}
-	if (usb_endpoint_xfer_control(&ep->desc)) {
-		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-				"Control endpoint stall already handled.");
-		return;
-	}
 
-	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-			"Queueing reset endpoint command");
-	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
 	/*
-	 * Can't change the ring dequeue pointer until it's transitioned to the
-	 * stopped state, which is only upon a successful reset endpoint
-	 * command.  Better hope that last command worked!
+	 * We might need to implement the config ep cmd in xhci 4.8.1 note:
+	 * The Reset Endpoint Command may only be issued to endpoints in the
+	 * Halted state. If software wishes reset the Data Toggle or Sequence
+	 * Number of an endpoint that isn't in the Halted state, then software
+	 * may issue a Configure Endpoint Command with the Drop and Add bits set
+	 * for the target endpoint. that is in the Stopped state.
 	 */
-	if (!ret) {
-		xhci_cleanup_stalled_ring(xhci, udev, ep_index);
-		kfree(virt_ep->stopped_td);
-		xhci_ring_cmd_db(xhci);
-	}
-	virt_ep->stopped_td = NULL;
-	virt_ep->stopped_trb = NULL;
-	virt_ep->stopped_stream = 0;
-	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	if (ret)
-		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
+	/* For now just print debug to follow the situation */
+	xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
+		 ep->desc.bEndpointAddress);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
@@ -3922,13 +3935,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	int ret;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return 0;
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
 	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
 	if (!ctrl_ctx) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ed3a425..1703de9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -864,8 +864,6 @@ struct xhci_virt_ep {
 #define EP_GETTING_NO_STREAMS	(1 << 5)
 	/* ----  Related to URB cancellation ---- */
 	struct list_head	cancelled_td_list;
-	/* The TRB that was last reported in a stopped endpoint ring */
-	union xhci_trb		*stopped_trb;
 	struct xhci_td		*stopped_td;
 	unsigned int		stopped_stream;
 	/* Watchdog timer for stop endpoint command to cancel URBs */
@@ -1769,7 +1767,7 @@ void xhci_shutdown(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 
 #ifdef	CONFIG_PM
-int xhci_suspend(struct xhci_hcd *xhci);
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
 int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
 #else
 #define	xhci_suspend	NULL
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 3eaa83f..e2373f1 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -815,15 +815,10 @@ static void adu_disconnect(struct usb_interface *interface)
 	usb_set_intfdata(interface, NULL);
 
 	/* if the device is not opened, then we clean up right now */
-	dev_dbg(&dev->udev->dev, "%s : open count %d\n",
-		__func__, dev->open_count);
 	if (!dev->open_count)
 		adu_delete(dev);
 
 	mutex_unlock(&adutux_mutex);
-
-	dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
-		 (minor - ADU_MINOR_BASE));
 }
 
 /* usb specific object needed to register this driver with the usb subsystem */
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index de98906..0aef801 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3248,6 +3248,7 @@ static const struct usb_device_id sisusb_table[] = {
 	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x0711, 0x0920) },
 	{ USB_DEVICE(0x0711, 0x0950) },
+	{ USB_DEVICE(0x0711, 0x5200) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index aa28ac8..9a1297e 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -7,9 +7,10 @@
 #include <linux/moduleparam.h>
 #include <linux/scatterlist.h>
 #include <linux/mutex.h>
-
+#include <linux/timer.h>
 #include <linux/usb.h>
 
+#define SIMPLE_IO_TIMEOUT	10000	/* in milliseconds */
 
 /*-------------------------------------------------------------------------*/
 
@@ -366,6 +367,7 @@ static int simple_io(
 	int			max = urb->transfer_buffer_length;
 	struct completion	completion;
 	int			retval = 0;
+	unsigned long		expire;
 
 	urb->context = &completion;
 	while (retval == 0 && iterations-- > 0) {
@@ -378,9 +380,15 @@ static int simple_io(
 		if (retval != 0)
 			break;
 
-		/* NOTE:  no timeouts; can't be broken out of by interrupt */
-		wait_for_completion(&completion);
-		retval = urb->status;
+		expire = msecs_to_jiffies(SIMPLE_IO_TIMEOUT);
+		if (!wait_for_completion_timeout(&completion, expire)) {
+			usb_kill_urb(urb);
+			retval = (urb->status == -ENOENT ?
+				  -ETIMEDOUT : urb->status);
+		} else {
+			retval = urb->status;
+		}
+
 		urb->dev = udev;
 		if (retval == 0 && usb_pipein(urb->pipe))
 			retval = simple_check_buf(tdev, urb);
@@ -476,6 +484,14 @@ alloc_sglist(int nents, int max, int vary)
 	return sg;
 }
 
+static void sg_timeout(unsigned long _req)
+{
+	struct usb_sg_request	*req = (struct usb_sg_request *) _req;
+
+	req->status = -ETIMEDOUT;
+	usb_sg_cancel(req);
+}
+
 static int perform_sglist(
 	struct usbtest_dev	*tdev,
 	unsigned		iterations,
@@ -487,6 +503,9 @@ static int perform_sglist(
 {
 	struct usb_device	*udev = testdev_to_usbdev(tdev);
 	int			retval = 0;
+	struct timer_list	sg_timer;
+
+	setup_timer_on_stack(&sg_timer, sg_timeout, (unsigned long) req);
 
 	while (retval == 0 && iterations-- > 0) {
 		retval = usb_sg_init(req, udev, pipe,
@@ -497,7 +516,10 @@ static int perform_sglist(
 
 		if (retval)
 			break;
+		mod_timer(&sg_timer, jiffies +
+				msecs_to_jiffies(SIMPLE_IO_TIMEOUT));
 		usb_sg_wait(req);
+		del_timer_sync(&sg_timer);
 		retval = req->status;
 
 		/* FIXME check resulting data pattern */
@@ -1149,6 +1171,11 @@ static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
 	urb->context = &completion;
 	urb->complete = unlink1_callback;
 
+	if (usb_pipeout(urb->pipe)) {
+		simple_fill_buf(urb);
+		urb->transfer_flags |= URB_ZERO_PACKET;
+	}
+
 	/* keep the endpoint busy.  there are lots of hc/hcd-internal
 	 * states, and testing should get to all of them over time.
 	 *
@@ -1279,6 +1306,11 @@ static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num,
 				unlink_queued_callback, &ctx);
 		ctx.urbs[i]->transfer_dma = buf_dma;
 		ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+
+		if (usb_pipeout(ctx.urbs[i]->pipe)) {
+			simple_fill_buf(ctx.urbs[i]);
+			ctx.urbs[i]->transfer_flags |= URB_ZERO_PACKET;
+		}
 	}
 
 	/* Submit all the URBs and then unlink URBs num - 4 and num - 2. */
diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c
index 41ac5b5..83b97dc 100644
--- a/drivers/usb/musb/musb_am335x.c
+++ b/drivers/usb/musb/musb_am335x.c
@@ -20,21 +20,6 @@ err:
 	return ret;
 }
 
-static int of_remove_populated_child(struct device *dev, void *d)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	of_device_unregister(pdev);
-	return 0;
-}
-
-static int am335x_child_remove(struct platform_device *pdev)
-{
-	device_for_each_child(&pdev->dev, NULL, of_remove_populated_child);
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
-
 static const struct of_device_id am335x_child_of_match[] = {
 	{ .compatible = "ti,am33xx-usb" },
 	{  },
@@ -43,13 +28,17 @@ MODULE_DEVICE_TABLE(of, am335x_child_of_match);
 
 static struct platform_driver am335x_child_driver = {
 	.probe		= am335x_child_probe,
-	.remove         = am335x_child_remove,
 	.driver         = {
 		.name   = "am335x-usb-childs",
 		.of_match_table	= of_match_ptr(am335x_child_of_match),
 	},
 };
 
-module_platform_driver(am335x_child_driver);
+static int __init am335x_child_init(void)
+{
+	return platform_driver_register(&am335x_child_driver);
+}
+module_init(am335x_child_init);
+
 MODULE_DESCRIPTION("AM33xx child devices");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index f7dca0b..2cca870 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -439,7 +439,6 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl)
 {
-	struct usb_otg *otg = musb->xceiv->otg;
 	irqreturn_t handled = IRQ_NONE;
 
 	dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl,
@@ -654,7 +653,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				break;
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
-			musb->is_active = otg->gadget->b_hnp_enable;
+			musb->is_active = musb->g.b_hnp_enable;
 			if (musb->is_active) {
 				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -670,7 +669,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			break;
 		case OTG_STATE_A_HOST:
 			musb->xceiv->state = OTG_STATE_A_SUSPEND;
-			musb->is_active = otg->host->b_hnp_enable;
+			musb->is_active = musb->hcd->self.b_hnp_enable;
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 0c593af..77b475a 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -190,10 +190,11 @@ static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
 		}
 	}
 
-	if (!list_empty(&controller->early_tx_list)) {
+	if (!list_empty(&controller->early_tx_list) &&
+	    !hrtimer_is_queued(&controller->early_tx)) {
 		ret = HRTIMER_RESTART;
 		hrtimer_forward_now(&controller->early_tx,
-				ktime_set(0, 150 * NSEC_PER_USEC));
+				ktime_set(0, 50 * NSEC_PER_USEC));
 	}
 
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -266,9 +267,11 @@ static void cppi41_dma_callback(void *private_data)
 		}
 		list_add_tail(&cppi41_channel->tx_check,
 				&controller->early_tx_list);
-		if (!hrtimer_active(&controller->early_tx)) {
+		if (!hrtimer_is_queued(&controller->early_tx)) {
+			unsigned long usecs = cppi41_channel->total_len / 10;
+
 			hrtimer_start_range_ns(&controller->early_tx,
-				ktime_set(0, 140 * NSEC_PER_USEC),
+				ktime_set(0, usecs * NSEC_PER_USEC),
 				40 * NSEC_PER_USEC,
 				HRTIMER_MODE_REL);
 		}
@@ -583,9 +586,9 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		ret = of_property_read_string_index(np, "dma-names", i, &str);
 		if (ret)
 			goto err;
-		if (!strncmp(str, "tx", 2))
+		if (strstarts(str, "tx"))
 			is_tx = 1;
-		else if (!strncmp(str, "rx", 2))
+		else if (strstarts(str, "rx"))
 			is_tx = 0;
 		else {
 			dev_err(dev, "Wrong dmatype %s\n", str);
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c21679..05d1b20 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -194,30 +194,30 @@ static ssize_t musb_test_mode_write(struct file *file,
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (!strncmp(buf, "force host", 9))
+	if (strstarts(buf, "force host"))
 		test = MUSB_TEST_FORCE_HOST;
 
-	if (!strncmp(buf, "fifo access", 11))
+	if (strstarts(buf, "fifo access"))
 		test = MUSB_TEST_FIFO_ACCESS;
 
-	if (!strncmp(buf, "force full-speed", 15))
+	if (strstarts(buf, "force full-speed"))
 		test = MUSB_TEST_FORCE_FS;
 
-	if (!strncmp(buf, "force high-speed", 15))
+	if (strstarts(buf, "force high-speed"))
 		test = MUSB_TEST_FORCE_HS;
 
-	if (!strncmp(buf, "test packet", 10)) {
+	if (strstarts(buf, "test packet")) {
 		test = MUSB_TEST_PACKET;
 		musb_load_testpacket(musb);
 	}
 
-	if (!strncmp(buf, "test K", 6))
+	if (strstarts(buf, "test K"))
 		test = MUSB_TEST_K;
 
-	if (!strncmp(buf, "test J", 6))
+	if (strstarts(buf, "test J"))
 		test = MUSB_TEST_J;
 
-	if (!strncmp(buf, "test SE0 NAK", 12))
+	if (strstarts(buf, "test SE0 NAK"))
 		test = MUSB_TEST_SE0_NAK;
 
 	musb_writeb(musb->mregs, MUSB_TESTMODE, test);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9a2b8c8..d73cda3 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2631,7 +2631,6 @@ void musb_host_cleanup(struct musb *musb)
 	if (musb->port_mode == MUSB_PORT_MODE_GADGET)
 		return;
 	usb_remove_hcd(musb->hcd);
-	musb->hcd = NULL;
 }
 
 void musb_host_free(struct musb *musb)
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 59256b1..8264256 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -275,7 +275,6 @@ static int ux500_probe(struct platform_device *pdev)
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
-	musb->dev.of_node		= pdev->dev.of_node;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index d3a5160..4a2ced0 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1295,7 +1295,7 @@ isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
 		return isp1301_otg_enable(isp);
 	return 0;
 
-#elif	!defined(CONFIG_USB_GADGET_OMAP)
+#elif !IS_ENABLED(CONFIG_USB_OMAP)
 	// FIXME update its refcount
 	otg->host = host;
 
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index e9cb1cb..d85a782 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -881,8 +881,8 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
 		return -ENOMEM;
 	}
 
-	tegra_phy->config = devm_kzalloc(&pdev->dev,
-		sizeof(*tegra_phy->config), GFP_KERNEL);
+	tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config),
+					 GFP_KERNEL);
 	if (!tegra_phy->config) {
 		dev_err(&pdev->dev,
 			"unable to allocate memory for USB UTMIP config\n");
diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
index 217339d..17ea3f2 100644
--- a/drivers/usb/phy/phy-ulpi.c
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -47,6 +47,8 @@ struct ulpi_info {
 static struct ulpi_info ulpi_ids[] = {
 	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
 	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
+	ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
 };
 
 static int ulpi_set_otg_flags(struct usb_phy *phy)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index a9984c7..5d7966b 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -229,6 +229,9 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
 	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
 	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver\n");
+		if (!IS_ERR(phy))
+			phy = ERR_PTR(-ENODEV);
+
 		goto err0;
 	}
 
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 6335490..74fc63b 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -97,13 +97,19 @@ static int usb_serial_device_remove(struct device *dev)
 	struct usb_serial_port *port;
 	int retval = 0;
 	int minor;
+	int autopm_err;
 
 	port = to_usb_serial_port(dev);
 	if (!port)
 		return -ENODEV;
 
-	/* make sure suspend/resume doesn't race against port_remove */
-	usb_autopm_get_interface(port->serial->interface);
+	/*
+	 * Make sure suspend/resume doesn't race against port_remove.
+	 *
+	 * Note that no further runtime PM callbacks will be made if
+	 * autopm_get fails.
+	 */
+	autopm_err = usb_autopm_get_interface(port->serial->interface);
 
 	minor = port->minor;
 	tty_unregister_device(usb_serial_tty_driver, minor);
@@ -117,7 +123,9 @@ static int usb_serial_device_remove(struct device *dev)
 	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
 		 driver->description, minor);
 
-	usb_autopm_put_interface(port->serial->interface);
+	if (!autopm_err)
+		usb_autopm_put_interface(port->serial->interface);
+
 	return retval;
 }
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index c69bb50..e4ce48c 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -47,6 +47,8 @@ static struct console usbcons;
  * ------------------------------------------------------------
  */
 
+static const struct tty_operations usb_console_fake_tty_ops = {
+};
 
 /*
  * The parsing of the command line works exactly like the
@@ -139,14 +141,18 @@ static int usb_console_setup(struct console *co, char *options)
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
-			tty_port_tty_set(&port->port, tty);
 			tty->driver = usb_serial_tty_driver;
 			tty->index = co->index;
+			init_ldsem(&tty->ldisc_sem);
+			INIT_LIST_HEAD(&tty->tty_files);
+			kref_get(&tty->driver->kref);
+			tty->ops = &usb_console_fake_tty_ops;
 			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
 				dev_err(&port->dev, "no more memory\n");
-				goto free_tty;
+				goto put_tty;
 			}
+			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -164,7 +170,7 @@ static int usb_console_setup(struct console *co, char *options)
 			serial->type->set_termios(tty, port, &dummy);
 
 			tty_port_tty_set(&port->port, NULL);
-			kfree(tty);
+			tty_kref_put(tty);
 		}
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
@@ -180,8 +186,8 @@ static int usb_console_setup(struct console *co, char *options)
 
  fail:
 	tty_port_tty_set(&port->port, NULL);
- free_tty:
-	kfree(tty);
+ put_tty:
+	tty_kref_put(tty);
  reset_open_count:
 	port->port.count = 0;
 	usb_autopm_put_interface(serial->interface);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 6987b53..b5fa609 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -104,6 +104,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
@@ -119,8 +120,12 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x8856) },	/* CEL EM357 ZigBee USB Stick - LR */
+	{ USB_DEVICE(0x10C4, 0x8857) },	/* CEL EM357 ZigBee USB Stick */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -152,7 +157,10 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
@@ -858,9 +866,6 @@ static int cp210x_startup(struct usb_serial *serial)
 	struct usb_host_interface *cur_altsetting;
 	struct cp210x_serial_private *spriv;
 
-	/* cp210x buffers behave strangely unless device is reset */
-	usb_reset_device(serial->dev);
-
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b7f715f..00710ff 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -146,12 +146,14 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
  * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
  */
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
@@ -482,6 +484,39 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -581,6 +616,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	/*
 	 * ELV devices:
 	 */
@@ -672,6 +709,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
@@ -719,7 +760,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
-	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_1_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_3_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
@@ -736,6 +778,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
@@ -910,6 +953,45 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
 	/* Cressi Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) },
+	/* Brainboxes Devices */
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+	/* ekey Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
+	/* Infineon Devices */
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+	/* GE Healthcare devices */
+	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
 	{ }					/* Terminating entry */
 };
 
@@ -1532,14 +1614,17 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
 	struct usb_device *udev = serial->dev;
 
 	struct usb_interface *interface = serial->interface;
-	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+	struct usb_endpoint_descriptor *ep_desc;
 
 	unsigned num_endpoints;
-	int i;
+	unsigned i;
 
 	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
 	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
 
+	if (!num_endpoints)
+		return;
+
 	/* NOTE: some customers have programmed FT232R/FT245R devices
 	 * with an endpoint size of 0 - not good.  In this case, we
 	 * want to override the endpoint descriptor setting and use a
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e599fbf..e52409c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -30,6 +30,12 @@
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID		0x0000
+
 #define FTDI_LUMEL_PD12_PID	0x6002
 
 /*
@@ -42,6 +48,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_BM_ATOM_NANO_PID	0xa559	/* Basic Micro ATOM Nano USB2Serial */
+
 /*
  * Texas Instruments XDS100v2 JTAG / BeagleBone A3
  * http://processors.wiki.ti.com/index.php/XDS100
@@ -140,12 +148,19 @@
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
-#define XSENS_CONVERTER_0_PID	0xD388
-#define XSENS_CONVERTER_1_PID	0xD389
+#define XSENS_VID		0x2639
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
+#define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
+#define XSENS_CONVERTER_0_PID	0xD388	/* Xsens USB converter */
+#define XSENS_CONVERTER_1_PID	0xD389	/* Xsens Wireless Receiver */
 #define XSENS_CONVERTER_2_PID	0xD38A
-#define XSENS_CONVERTER_3_PID	0xD38B
-#define XSENS_CONVERTER_4_PID	0xD38C
-#define XSENS_CONVERTER_5_PID	0xD38D
+#define XSENS_CONVERTER_3_PID	0xD38B	/* Xsens USB-serial converter */
+#define XSENS_CONVERTER_4_PID	0xD38C	/* Xsens Wireless Receiver */
+#define XSENS_CONVERTER_5_PID	0xD38D	/* Xsens Awinda Station */
 #define XSENS_CONVERTER_6_PID	0xD38E
 #define XSENS_CONVERTER_7_PID	0xD38F
 
@@ -538,6 +553,11 @@
  */
 #define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
 
+/*
+ * NovaTech product ids (FTDI_VID)
+ */
+#define FTDI_NT_ORIONLXM_PID	0x7c90	/* OrionLXm Substation Automation Platform */
+
 
 /********************************/
 /** third-party VID/PID combos **/
@@ -579,6 +599,12 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Infineon Technologies
+ */
+#define INFINEON_VID		0x058b
+#define INFINEON_TRIBOARD_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+
+/*
  * Acton Research Corp.
  */
 #define ACTON_VID		0x0647	/* Vendor ID */
@@ -793,7 +819,8 @@
  * Submitted by Colin Leroy
  */
 #define TESTO_VID			0x128D
-#define TESTO_USB_INTERFACE_PID		0x0001
+#define TESTO_1_PID			0x0001
+#define TESTO_3_PID			0x0003
 
 /*
  * Mobility Electronics products.
@@ -820,6 +847,12 @@
 #define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
 
 /*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID			0x1a28
+#define NOVITUS_BONO_E_PID		0x6010
+
+/*
  * RT Systems programming cables for various ham radios
  */
 #define RTSYSTEMS_VID		0x2100	/* Vendor ID */
@@ -893,8 +926,8 @@
 #define BAYER_CONTOUR_CABLE_PID        0x6001
 
 /*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
+ * Matrix Orbital Intelligent USB displays.
+ * http://www.matrixorbital.com
  */
 #define MTXORB_VID			0x1B3D
 #define MTXORB_FTDI_RANGE_0100_PID	0x0100
@@ -1153,8 +1186,39 @@
 #define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
 #define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
 #define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
-
-
+#define MTXORB_FTDI_RANGE_4701_PID	0x4701
+#define MTXORB_FTDI_RANGE_9300_PID	0x9300
+#define MTXORB_FTDI_RANGE_9301_PID	0x9301
+#define MTXORB_FTDI_RANGE_9302_PID	0x9302
+#define MTXORB_FTDI_RANGE_9303_PID	0x9303
+#define MTXORB_FTDI_RANGE_9304_PID	0x9304
+#define MTXORB_FTDI_RANGE_9305_PID	0x9305
+#define MTXORB_FTDI_RANGE_9306_PID	0x9306
+#define MTXORB_FTDI_RANGE_9307_PID	0x9307
+#define MTXORB_FTDI_RANGE_9308_PID	0x9308
+#define MTXORB_FTDI_RANGE_9309_PID	0x9309
+#define MTXORB_FTDI_RANGE_930A_PID	0x930A
+#define MTXORB_FTDI_RANGE_930B_PID	0x930B
+#define MTXORB_FTDI_RANGE_930C_PID	0x930C
+#define MTXORB_FTDI_RANGE_930D_PID	0x930D
+#define MTXORB_FTDI_RANGE_930E_PID	0x930E
+#define MTXORB_FTDI_RANGE_930F_PID	0x930F
+#define MTXORB_FTDI_RANGE_9310_PID	0x9310
+#define MTXORB_FTDI_RANGE_9311_PID	0x9311
+#define MTXORB_FTDI_RANGE_9312_PID	0x9312
+#define MTXORB_FTDI_RANGE_9313_PID	0x9313
+#define MTXORB_FTDI_RANGE_9314_PID	0x9314
+#define MTXORB_FTDI_RANGE_9315_PID	0x9315
+#define MTXORB_FTDI_RANGE_9316_PID	0x9316
+#define MTXORB_FTDI_RANGE_9317_PID	0x9317
+#define MTXORB_FTDI_RANGE_9318_PID	0x9318
+#define MTXORB_FTDI_RANGE_9319_PID	0x9319
+#define MTXORB_FTDI_RANGE_931A_PID	0x931A
+#define MTXORB_FTDI_RANGE_931B_PID	0x931B
+#define MTXORB_FTDI_RANGE_931C_PID	0x931C
+#define MTXORB_FTDI_RANGE_931D_PID	0x931D
+#define MTXORB_FTDI_RANGE_931E_PID	0x931E
+#define MTXORB_FTDI_RANGE_931F_PID	0x931F
 
 /*
  * The Mobility Lab (TML)
@@ -1326,3 +1390,51 @@
  * Manufacturer: Cressi
  */
 #define FTDI_CRESSI_PID		0x87d0
+
+/*
+ * Brainboxes devices
+ */
+#define BRAINBOXES_VID			0x05d1
+#define BRAINBOXES_VX_001_PID		0x1001 /* VX-001 ExpressCard 1 Port RS232 */
+#define BRAINBOXES_VX_012_PID		0x1002 /* VX-012 ExpressCard 2 Port RS232 */
+#define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
+#define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
+#define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
+#define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
+#define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */
+#define BRAINBOXES_US_606_3_PID		0x2003 /* US-606 6 Port RS232 Serial Port 4 and 6 */
+#define BRAINBOXES_US_701_1_PID		0x2011 /* US-701 4xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_701_2_PID		0x2012 /* US-701 4xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_1_PID		0x2021 /* US-279 8xRS422 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_279_2_PID		0x2022 /* US-279 8xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_3_PID		0x2023 /* US-279 8xRS422 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_279_4_PID		0x2024 /* US-279 8xRS422 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_346_1_PID		0x3011 /* US-346 4xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_346_2_PID		0x3012 /* US-346 4xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_257_PID		0x5001 /* US-257 2xRS232 1Mbaud */
+#define BRAINBOXES_US_313_PID		0x6001 /* US-313 2xRS422/485 1Mbaud */
+#define BRAINBOXES_US_357_PID		0x7001 /* US_357 1xRS232/422/485 */
+#define BRAINBOXES_US_842_1_PID		0x8001 /* US-842 8xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_842_2_PID		0x8002 /* US-842 8xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_842_3_PID		0x8003 /* US-842 8xRS422/485 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_842_4_PID		0x8004 /* US-842 8xRS422/485 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_1_PID		0x9001 /* US-160 16xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_160_2_PID		0x9002 /* US-160 16xRS232 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_160_3_PID		0x9003 /* US-160 16xRS232 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_160_4_PID		0x9004 /* US-160 16xRS232 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_5_PID		0x9005 /* US-160 16xRS232 1Mbaud Port 9 and 10 */
+#define BRAINBOXES_US_160_6_PID		0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
+#define BRAINBOXES_US_160_7_PID		0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
+#define BRAINBOXES_US_160_8_PID		0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
+
+/*
+ * ekey biometric systems GmbH (http://ekey.net/)
+ */
+#define FTDI_EKEY_CONV_USB_PID		0xCB08	/* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID		0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID	0x0015
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index b7187bf..0385bc4 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -29,6 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/serial.h>
+#include <linux/swab.h>
 #include <linux/kfifo.h>
 #include <linux/ioctl.h>
 #include <linux/firmware.h>
@@ -281,7 +282,7 @@ static int read_download_mem(struct usb_device *dev, int start_address,
 {
 	int status = 0;
 	__u8 read_length;
-	__be16 be_start_address;
+	u16 be_start_address;
 
 	dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
 
@@ -297,10 +298,14 @@ static int read_download_mem(struct usb_device *dev, int start_address,
 		if (read_length > 1) {
 			dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
 		}
-		be_start_address = cpu_to_be16(start_address);
+		/*
+		 * NOTE: Must use swab as wIndex is sent in little-endian
+		 *       byte order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
 		status = ti_vread_sync(dev, UMPC_MEMORY_READ,
 					(__u16)address_type,
-					(__force __u16)be_start_address,
+					be_start_address,
 					buffer, read_length);
 
 		if (status) {
@@ -397,7 +402,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 	struct device *dev = &serial->serial->dev->dev;
 	int status = 0;
 	int write_length;
-	__be16 be_start_address;
+	u16 be_start_address;
 
 	/* We can only send a maximum of 1 aligned byte page at a time */
 
@@ -412,11 +417,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 		__func__, start_address, write_length);
 	usb_serial_debug_data(dev, __func__, write_length, buffer);
 
-	/* Write first page */
-	be_start_address = cpu_to_be16(start_address);
+	/*
+	 * Write first page.
+	 *
+	 * NOTE: Must use swab as wIndex is sent in little-endian byte order
+	 *       regardless of host byte order.
+	 */
+	be_start_address = swab16((u16)start_address);
 	status = ti_vsend_sync(serial->serial->dev,
 				UMPC_MEMORY_WRITE, (__u16)address_type,
-				(__force __u16)be_start_address,
+				be_start_address,
 				buffer,	write_length);
 	if (status) {
 		dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
@@ -439,11 +449,16 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 			__func__, start_address, write_length);
 		usb_serial_debug_data(dev, __func__, write_length, buffer);
 
-		/* Write next page */
-		be_start_address = cpu_to_be16(start_address);
+		/*
+		 * Write next page.
+		 *
+		 * NOTE: Must use swab as wIndex is sent in little-endian byte
+		 *       order regardless of host byte order.
+		 */
+		be_start_address = swab16((u16)start_address);
 		status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
 				(__u16)address_type,
-				(__force __u16)be_start_address,
+				be_start_address,
 				buffer, write_length);
 		if (status) {
 			dev_err(dev, "%s - ERROR %d\n", __func__, status);
@@ -590,8 +605,8 @@ static int get_descriptor_addr(struct edgeport_serial *serial,
 		if (rom_desc->Type == desc_type)
 			return start_address;
 
-		start_address = start_address + sizeof(struct ti_i2c_desc)
-							+ rom_desc->Size;
+		start_address = start_address + sizeof(struct ti_i2c_desc) +
+						le16_to_cpu(rom_desc->Size);
 
 	} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
 
@@ -604,7 +619,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
 	__u16 i;
 	__u8 cs = 0;
 
-	for (i = 0; i < rom_desc->Size; i++)
+	for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
 		cs = (__u8)(cs + buffer[i]);
 
 	if (cs != rom_desc->CheckSum) {
@@ -658,7 +673,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
 			break;
 
 		if ((start_address + sizeof(struct ti_i2c_desc) +
-					rom_desc->Size) > TI_MAX_I2C_SIZE) {
+			le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
 			status = -ENODEV;
 			dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
 			break;
@@ -673,7 +688,8 @@ static int check_i2c_image(struct edgeport_serial *serial)
 			/* Read the descriptor data */
 			status = read_rom(serial, start_address +
 						sizeof(struct ti_i2c_desc),
-						rom_desc->Size, buffer);
+						le16_to_cpu(rom_desc->Size),
+						buffer);
 			if (status)
 				break;
 
@@ -682,7 +698,7 @@ static int check_i2c_image(struct edgeport_serial *serial)
 				break;
 		}
 		start_address = start_address + sizeof(struct ti_i2c_desc) +
-								rom_desc->Size;
+						le16_to_cpu(rom_desc->Size);
 
 	} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
 				(start_address < TI_MAX_I2C_SIZE));
@@ -721,7 +737,7 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
 
 	/* Read the descriptor data */
 	status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
-						rom_desc->Size, buffer);
+					le16_to_cpu(rom_desc->Size), buffer);
 	if (status)
 		goto exit;
 
@@ -816,7 +832,7 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
 	firmware_rec =  (struct ti_i2c_firmware_rec*)i2c_header->Data;
 
 	i2c_header->Type	= I2C_DESC_TYPE_FIRMWARE_BLANK;
-	i2c_header->Size	= (__u16)buffer_size;
+	i2c_header->Size	= cpu_to_le16(buffer_size);
 	i2c_header->CheckSum	= cs;
 	firmware_rec->Ver_Major	= OperationalMajorVersion;
 	firmware_rec->Ver_Minor	= OperationalMinorVersion;
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 51f83fb..6f6a856 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -594,7 +594,7 @@ struct edge_boot_descriptor {
 
 struct ti_i2c_desc {
 	__u8	Type;			// Type of descriptor
-	__u16	Size;			// Size of data only not including header
+	__le16	Size;			// Size of data only not including header
 	__u8	CheckSum;		// Checksum (8 bit sum of data only)
 	__u8	Data[0];		// Data starts here
 } __attribute__((packed));
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index d6960ae..e58e21b 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -312,24 +312,30 @@ static void	usa26_indat_callback(struct urb *urb)
 		if ((data[0] & 0x80) == 0) {
 			/* no errors on individual bytes, only
 			   possible overrun err */
-			if (data[0] & RXERROR_OVERRUN)
-				err = TTY_OVERRUN;
-			else
-				err = 0;
+			if (data[0] & RXERROR_OVERRUN) {
+				tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+			}
 			for (i = 1; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(&port->port, data[i], err);
+				tty_insert_flip_char(&port->port, data[i],
+								TTY_NORMAL);
 		} else {
 			/* some bytes had errors, every byte has status */
 			dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
-				int stat = data[i], flag = 0;
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						flag);
 			}
@@ -416,6 +422,8 @@ static void	usa26_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -426,7 +434,7 @@ static void	usa26_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -536,6 +544,8 @@ static void	usa28_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -546,7 +556,7 @@ static void	usa28_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 		/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -619,6 +629,8 @@ static void	usa49_instat_callback(struct urb *urb)
 	}
 	port = serial->port[msg->portNumber];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -629,7 +641,7 @@ static void	usa49_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -667,14 +679,19 @@ static void	usa49_indat_callback(struct urb *urb)
 		} else {
 			/* some bytes had errors, every byte has status */
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
-				int stat = data[i], flag = 0;
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
+
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						flag);
 			}
@@ -731,15 +748,19 @@ static void usa49wg_indat_callback(struct urb *urb)
 			 */
 			for (x = 0; x + 1 < len &&
 				    i + 1 < urb->actual_length; x += 2) {
-				int stat = data[i], flag = 0;
+				int stat = data[i];
+				int flag = TTY_NORMAL;
 
-				if (stat & RXERROR_OVERRUN)
-					flag |= TTY_OVERRUN;
-				if (stat & RXERROR_FRAMING)
-					flag |= TTY_FRAME;
-				if (stat & RXERROR_PARITY)
-					flag |= TTY_PARITY;
+				if (stat & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				/* XXX should handle break (0x10) */
+				if (stat & RXERROR_PARITY)
+					flag = TTY_PARITY;
+				else if (stat & RXERROR_FRAMING)
+					flag = TTY_FRAME;
+
 				tty_insert_flip_char(&port->port, data[i+1],
 						     flag);
 				i += 2;
@@ -791,25 +812,31 @@ static void usa90_indat_callback(struct urb *urb)
 			if ((data[0] & 0x80) == 0) {
 				/* no errors on individual bytes, only
 				   possible overrun err*/
-				if (data[0] & RXERROR_OVERRUN)
-					err = TTY_OVERRUN;
-				else
-					err = 0;
+				if (data[0] & RXERROR_OVERRUN) {
+					tty_insert_flip_char(&port->port, 0,
+								TTY_OVERRUN);
+				}
 				for (i = 1; i < urb->actual_length ; ++i)
 					tty_insert_flip_char(&port->port,
-							data[i], err);
+							data[i], TTY_NORMAL);
 			}  else {
 			/* some bytes had errors, every byte has status */
 				dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
 				for (i = 0; i + 1 < urb->actual_length; i += 2) {
-					int stat = data[i], flag = 0;
-					if (stat & RXERROR_OVERRUN)
-						flag |= TTY_OVERRUN;
-					if (stat & RXERROR_FRAMING)
-						flag |= TTY_FRAME;
-					if (stat & RXERROR_PARITY)
-						flag |= TTY_PARITY;
+					int stat = data[i];
+					int flag = TTY_NORMAL;
+
+					if (stat & RXERROR_OVERRUN) {
+						tty_insert_flip_char(
+								&port->port, 0,
+								TTY_OVERRUN);
+					}
 					/* XXX should handle break (0x10) */
+					if (stat & RXERROR_PARITY)
+						flag = TTY_PARITY;
+					else if (stat & RXERROR_FRAMING)
+						flag = TTY_FRAME;
+
 					tty_insert_flip_char(&port->port,
 							data[i+1], flag);
 				}
@@ -852,6 +879,8 @@ static void	usa90_instat_callback(struct urb *urb)
 
 	port = serial->port[0];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -862,7 +891,7 @@ static void	usa90_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
@@ -923,6 +952,8 @@ static void	usa67_instat_callback(struct urb *urb)
 
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
+	if (!p_priv)
+		goto resubmit;
 
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
@@ -931,7 +962,7 @@ static void	usa67_instat_callback(struct urb *urb)
 
 	if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
 		tty_port_tty_hangup(&port->port, true);
-
+resubmit:
 	/* Resubmit urb so we continue receiving */
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err != 0)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 78b48c3..efa75b4 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -336,7 +336,8 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			port->interrupt_out_urb->transfer_buffer_length = length;
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+			result = usb_submit_urb(port->interrupt_out_urb,
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
 			todo = priv->filled - priv->cur_pos;
 
@@ -351,7 +352,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
 			result = usb_submit_urb(port->interrupt_in_urb,
-								GFP_NOIO);
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
 		}
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cbe779f..df495ea 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -219,7 +219,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* The conncected devices do not have a bulk write endpoint,
 	 * to transmit data to de barcode device the control endpoint is used */
-	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
 	if (!dr) {
 		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 68fc9fe..8b34841 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -161,6 +161,7 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
 #define NOVATELWIRELESS_PRODUCT_E362		0x9010
+#define NOVATELWIRELESS_PRODUCT_E371		0x9011
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
@@ -234,8 +235,31 @@ static void option_instat_callback(struct urb *urb);
 #define QUALCOMM_VENDOR_ID			0x05C6
 
 #define CMOTECH_VENDOR_ID			0x16d8
-#define CMOTECH_PRODUCT_6008			0x6008
-#define CMOTECH_PRODUCT_6280			0x6280
+#define CMOTECH_PRODUCT_6001			0x6001
+#define CMOTECH_PRODUCT_CMU_300			0x6002
+#define CMOTECH_PRODUCT_6003			0x6003
+#define CMOTECH_PRODUCT_6004			0x6004
+#define CMOTECH_PRODUCT_6005			0x6005
+#define CMOTECH_PRODUCT_CGU_628A		0x6006
+#define CMOTECH_PRODUCT_CHE_628S		0x6007
+#define CMOTECH_PRODUCT_CMU_301			0x6008
+#define CMOTECH_PRODUCT_CHU_628			0x6280
+#define CMOTECH_PRODUCT_CHU_628S		0x6281
+#define CMOTECH_PRODUCT_CDU_680			0x6803
+#define CMOTECH_PRODUCT_CDU_685A		0x6804
+#define CMOTECH_PRODUCT_CHU_720S		0x7001
+#define CMOTECH_PRODUCT_7002			0x7002
+#define CMOTECH_PRODUCT_CHU_629K		0x7003
+#define CMOTECH_PRODUCT_7004			0x7004
+#define CMOTECH_PRODUCT_7005			0x7005
+#define CMOTECH_PRODUCT_CGU_629			0x7006
+#define CMOTECH_PRODUCT_CHU_629S		0x700a
+#define CMOTECH_PRODUCT_CHU_720I		0x7211
+#define CMOTECH_PRODUCT_7212			0x7212
+#define CMOTECH_PRODUCT_7213			0x7213
+#define CMOTECH_PRODUCT_7251			0x7251
+#define CMOTECH_PRODUCT_7252			0x7252
+#define CMOTECH_PRODUCT_7253			0x7253
 
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
@@ -243,15 +267,21 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_DUAL		0x1005
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
+#define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE920			0x1200
+#define TELIT_PRODUCT_LE910			0x1201
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
-#define ZTE_PRODUCT_MC2718			0xffe8
 #define ZTE_PRODUCT_AC2726			0xfff1
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
+#define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -286,6 +316,7 @@ static void option_instat_callback(struct urb *urb);
 #define ALCATEL_PRODUCT_X060S_X200		0x0000
 #define ALCATEL_PRODUCT_X220_X500D		0x0017
 #define ALCATEL_PRODUCT_L100V			0x011e
+#define ALCATEL_PRODUCT_L800MA			0x0203
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -326,8 +357,12 @@ static void option_instat_callback(struct urb *urb);
 /* Zoom */
 #define ZOOM_PRODUCT_4597			0x9607
 
+/* SpeedUp SU9800 usb 3g modem */
+#define SPEEDUP_PRODUCT_SU9800			0x9800
+
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
+#define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
 /* Cinterion (formerly Siemens) products */
@@ -346,8 +381,13 @@ static void option_instat_callback(struct urb *urb);
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
+#define OLIVETTI_PRODUCT_OLICARD120		0xc001
+#define OLIVETTI_PRODUCT_OLICARD140		0xc002
 #define OLIVETTI_PRODUCT_OLICARD145		0xc003
+#define OLIVETTI_PRODUCT_OLICARD155		0xc004
 #define OLIVETTI_PRODUCT_OLICARD200		0xc005
+#define OLIVETTI_PRODUCT_OLICARD160		0xc00a
+#define OLIVETTI_PRODUCT_OLICARD500		0xc00b
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f
@@ -460,6 +500,10 @@ static void option_instat_callback(struct urb *urb);
 #define INOVIA_VENDOR_ID			0x20a6
 #define INOVIA_SEW858				0x1105
 
+/* VIA Telecom */
+#define VIATELECOM_VENDOR_ID			0x15eb
+#define VIATELECOM_PRODUCT_CDS7			0x0001
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -493,14 +537,26 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
 static const struct option_blacklist_info zte_mc2718_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
 
+static const struct option_blacklist_info net_intf0_blacklist = {
+	.reserved = BIT(0),
+};
+
 static const struct option_blacklist_info net_intf1_blacklist = {
 	.reserved = BIT(1),
 };
@@ -534,6 +590,11 @@ static const struct option_blacklist_info zte_1255_blacklist = {
 	.reserved = BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info telit_le910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(2),
+};
+
 static const struct option_blacklist_info telit_le920_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(5),
@@ -982,6 +1043,7 @@ static const struct usb_device_id option_ids[] = {
 	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1031,16 +1093,59 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
-	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
-	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
+	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
+	  .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
@@ -1408,6 +1513,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
@@ -1463,13 +1570,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
 
-	/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
@@ -1498,14 +1610,18 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
+	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
   	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
   	},
+	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
 	/* Pirelli  */
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
@@ -1537,12 +1653,21 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
-
-	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155),
+		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
-		.driver_info = (kernel_ulong_t)&net_intf6_blacklist
-	},
+		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160),
+		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
@@ -1631,6 +1756,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
+	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1824,6 +1950,8 @@ static void option_instat_callback(struct urb *urb)
 			dev_dbg(dev, "%s: type %x req %x\n", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
 		}
+	} else if (status == -ENOENT || status == -ESHUTDOWN) {
+		dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status);
 	} else
 		dev_err(dev, "%s: error %d\n", __func__, status);
 
@@ -1848,6 +1976,7 @@ static int option_send_setup(struct usb_serial_port *port)
 	struct option_private *priv = intfdata->private;
 	struct usb_wwan_port_private *portdata;
 	int val = 0;
+	int res;
 
 	portdata = usb_get_serial_port_data(port);
 
@@ -1856,9 +1985,17 @@ static int option_send_setup(struct usb_serial_port *port)
 	if (portdata->rts_state)
 		val |= 0x02;
 
-	return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	res = usb_autopm_get_interface(serial->interface);
+	if (res)
+		return res;
+
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, priv->bInterfaceNumber, NULL,
 				0, USB_CTRL_SET_TIMEOUT);
+
+	usb_autopm_put_interface(serial->interface);
+
+	return res;
 }
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index beb8edc..81ab710 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -48,6 +48,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -83,6 +84,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index c38b8c0..71fd9da 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -22,6 +22,7 @@
 #define PL2303_PRODUCT_ID_GPRS		0x0609
 #define PL2303_PRODUCT_ID_HCR331	0x331a
 #define PL2303_PRODUCT_ID_MOTOROLA	0x0307
+#define PL2303_PRODUCT_ID_ZTEK		0xe1f1
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
@@ -121,8 +122,11 @@
 #define SUPERIAL_VENDOR_ID	0x5372
 #define SUPERIAL_PRODUCT_ID	0x2303
 
-/* Hewlett-Packard LD220-HP POS Pole Display */
+/* Hewlett-Packard POS Pole Displays */
 #define HP_VENDOR_ID		0x03f0
+#define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LCM220_PRODUCT_ID	0x3139
+#define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524
 
 /* Cressi Edy (diving computer) PC interface */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 968a402..3e96d1a 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,8 +22,17 @@
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
 
+/* standard device layouts supported by this driver */
+enum qcserial_layouts {
+	QCSERIAL_G2K = 0,	/* Gobi 2000 */
+	QCSERIAL_G1K = 1,	/* Gobi 1000 */
+	QCSERIAL_SWI = 2,	/* Sierra Wireless */
+};
+
 #define DEVICE_G1K(v, p) \
-	USB_DEVICE(v, p), .driver_info = 1
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
+#define DEVICE_SWI(v, p) \
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
 
 static const struct usb_device_id id_table[] = {
 	/* Gobi 1000 devices */
@@ -126,22 +135,27 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
 
-	/* non Gobi Qualcomm serial devices */
-	{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)},	/* Sierra Wireless MC7700 Device Management */
-	{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 2)},	/* Sierra Wireless MC7700 NMEA */
-	{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 3)},	/* Sierra Wireless MC7700 Modem */
-	{USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 0)},	/* Sierra Wireless MC7750 Device Management */
-	{USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 2)},	/* Sierra Wireless MC7750 NMEA */
-	{USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 3)},	/* Sierra Wireless MC7750 Modem */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)},	/* Sierra Wireless MC7710 Device Management */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)},	/* Sierra Wireless MC7710 NMEA */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)},	/* Sierra Wireless MC7710 Modem */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)},	/* Sierra Wireless EM7700 Device Management */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)},	/* Sierra Wireless EM7700 NMEA */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)},	/* Sierra Wireless EM7700 Modem */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)},	/* Netgear AirCard 340U Device Management */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)},	/* Netgear AirCard 340U NMEA */
-	{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)},	/* Netgear AirCard 340U Modem */
+	/* non-Gobi Sierra Wireless devices */
+	{DEVICE_SWI(0x0f3d, 0x68a2)},	/* Sierra Wireless MC7700 */
+	{DEVICE_SWI(0x114f, 0x68a2)},	/* Sierra Wireless MC7750 */
+	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
+	{DEVICE_SWI(0x1199, 0x68c0)},	/* Sierra Wireless MC73xx */
+	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
+	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
+	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9041)},	/* Sierra Wireless MC7305/MC7355 */
+	{DEVICE_SWI(0x1199, 0x9051)},	/* Netgear AirCard 340U */
+	{DEVICE_SWI(0x1199, 0x9053)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9054)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9055)},	/* Netgear AirCard 341U */
+	{DEVICE_SWI(0x1199, 0x9056)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9060)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x1199, 0x9061)},	/* Sierra Wireless Modem */
+	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
 
 	{ }				/* Terminating entry */
 };
@@ -154,11 +168,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
-	bool is_gobi1k = id->driver_info ? true : false;
 	int altsetting = -1;
 
-	dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k);
-
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dev_dbg(dev, "Num Interfaces = %d\n", nintf);
 	ifnum = intf->desc.bInterfaceNumber;
@@ -193,25 +204,29 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		goto done;
 	}
 
-	if (nintf < 3 || nintf > 4) {
-		dev_err(dev, "unknown number of interfaces: %d\n", nintf);
-		goto done;
-	}
-
 	/* default to enabling interface */
 	altsetting = 0;
 
-	/* Composite mode; don't bind to the QMI/net interface as that
+	/*
+	 * Composite mode; don't bind to the QMI/net interface as that
 	 * gets handled by other drivers.
 	 */
 
-	if (is_gobi1k) {
-		/* Gobi 1K USB layout:
+	switch (id->driver_info) {
+	case QCSERIAL_G1K:
+		/*
+		 * Gobi 1K USB layout:
 		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 1: serial port (doesn't respond)
 		 * 2: AT-capable modem port
 		 * 3: QMI/net
 		 */
+		if (nintf < 3 || nintf > 4) {
+			dev_err(dev, "unknown number of interfaces: %d\n", nintf);
+			altsetting = -1;
+			goto done;
+		}
+
 		if (ifnum == 0) {
 			dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
 			altsetting = 1;
@@ -219,13 +234,21 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			dev_dbg(dev, "Modem port found\n");
 		else
 			altsetting = -1;
-	} else {
-		/* Gobi 2K+ USB layout:
+		break;
+	case QCSERIAL_G2K:
+		/*
+		 * Gobi 2K+ USB layout:
 		 * 0: QMI/net
 		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 2: AT-capable modem port
 		 * 3: NMEA
 		 */
+		if (nintf < 3 || nintf > 4) {
+			dev_err(dev, "unknown number of interfaces: %d\n", nintf);
+			altsetting = -1;
+			goto done;
+		}
+
 		switch (ifnum) {
 		case 0:
 			/* Don't claim the QMI/net interface */
@@ -246,6 +269,35 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
 			break;
 		}
+		break;
+	case QCSERIAL_SWI:
+		/*
+		 * Sierra Wireless layout:
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: NMEA
+		 * 3: AT-capable modem port
+		 * 8: QMI/net
+		 */
+		switch (ifnum) {
+		case 0:
+			dev_dbg(dev, "DM/DIAG interface found\n");
+			break;
+		case 2:
+			dev_dbg(dev, "NMEA GPS interface found\n");
+			break;
+		case 3:
+			dev_dbg(dev, "Modem port found\n");
+			break;
+		default:
+			/* don't claim any unsupported interface */
+			altsetting = -1;
+			break;
+		}
+		break;
+	default:
+		dev_err(dev, "unsupported device layout type: %lu\n",
+			id->driver_info);
+		break;
 	}
 
 done:
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index de958c5..d09a4e7 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -58,6 +58,7 @@ struct sierra_intf_private {
 	spinlock_t susp_lock;
 	unsigned int suspended:1;
 	int in_flight;
+	unsigned int open_ports;
 };
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
@@ -281,17 +282,21 @@ static const struct usb_device_id id_table[] = {
 	/* Sierra Wireless HSPA Non-Composite Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
+	/* Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
 	/* AT&T Direct IP LTE modems */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
-	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	/* Airprime/Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
-       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
@@ -768,6 +773,7 @@ static void sierra_close(struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 	struct sierra_intf_private *intfdata = port->serial->private;
+	struct urb *urb;
 
 	portdata = usb_get_serial_port_data(port);
 
@@ -776,7 +782,6 @@ static void sierra_close(struct usb_serial_port *port)
 
 	mutex_lock(&serial->disc_mutex);
 	if (!serial->disconnected) {
-		serial->interface->needs_remote_wakeup = 0;
 		/* odd error handling due to pm counters */
 		if (!usb_autopm_get_interface(serial->interface))
 			sierra_send_setup(port);
@@ -787,8 +792,22 @@ static void sierra_close(struct usb_serial_port *port)
 	mutex_unlock(&serial->disc_mutex);
 	spin_lock_irq(&intfdata->susp_lock);
 	portdata->opened = 0;
+	if (--intfdata->open_ports == 0)
+		serial->interface->needs_remote_wakeup = 0;
 	spin_unlock_irq(&intfdata->susp_lock);
 
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+		usb_autopm_put_interface_async(serial->interface);
+		spin_lock(&portdata->lock);
+		portdata->outstanding_urbs--;
+		spin_unlock(&portdata->lock);
+	}
+
 	sierra_stop_rx_urbs(port);
 	for (i = 0; i < portdata->num_in_urbs; i++) {
 		sierra_release_urb(portdata->in_urbs[i]);
@@ -825,23 +844,29 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 			usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
 
 	err = sierra_submit_rx_urbs(port, GFP_KERNEL);
-	if (err) {
-		/* get rid of everything as in close */
-		sierra_close(port);
-		/* restore balance for autopm */
-		if (!serial->disconnected)
-			usb_autopm_put_interface(serial->interface);
-		return err;
-	}
+	if (err)
+		goto err_submit;
+
 	sierra_send_setup(port);
 
-	serial->interface->needs_remote_wakeup = 1;
 	spin_lock_irq(&intfdata->susp_lock);
 	portdata->opened = 1;
+	if (++intfdata->open_ports == 1)
+		serial->interface->needs_remote_wakeup = 1;
 	spin_unlock_irq(&intfdata->susp_lock);
 	usb_autopm_put_interface(serial->interface);
 
 	return 0;
+
+err_submit:
+	sierra_stop_rx_urbs(port);
+
+	for (i = 0; i < portdata->num_in_urbs; i++) {
+		sierra_release_urb(portdata->in_urbs[i]);
+		portdata->in_urbs[i] = NULL;
+	}
+
+	return err;
 }
 
 
@@ -937,6 +962,7 @@ static int sierra_port_remove(struct usb_serial_port *port)
 	struct sierra_port_private *portdata;
 
 	portdata = usb_get_serial_port_data(port);
+	usb_set_serial_port_data(port, NULL);
 	kfree(portdata);
 
 	return 0;
@@ -953,6 +979,8 @@ static void stop_read_write_urbs(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
+		if (!portdata)
+			continue;
 		sierra_stop_rx_urbs(port);
 		usb_kill_anchored_urbs(&portdata->active);
 	}
@@ -995,6 +1023,9 @@ static int sierra_resume(struct usb_serial *serial)
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
 
+		if (!portdata)
+			continue;
+
 		while ((urb = usb_get_from_anchor(&portdata->delayed))) {
 			usb_anchor_urb(urb, &portdata->active);
 			intfdata->in_flight++;
@@ -1002,8 +1033,12 @@ static int sierra_resume(struct usb_serial *serial)
 			if (err < 0) {
 				intfdata->in_flight--;
 				usb_unanchor_urb(urb);
-				usb_scuttle_anchored_urbs(&portdata->delayed);
-				break;
+				kfree(urb->transfer_buffer);
+				usb_free_urb(urb);
+				spin_lock(&portdata->lock);
+				portdata->outstanding_urbs--;
+				spin_unlock(&portdata->lock);
+				continue;
 			}
 		}
 
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index e5750be..d667ff9 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -495,10 +495,9 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 			if (*tty_flag == TTY_NORMAL)
 				*tty_flag = TTY_FRAME;
 		}
-		if (lsr & UART_LSR_OE){
+		if (lsr & UART_LSR_OE) {
 			port->icount.overrun++;
-			if (*tty_flag == TTY_NORMAL)
-				*tty_flag = TTY_OVERRUN;
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 		}
 	}
 
@@ -516,12 +515,8 @@ static void ssu100_process_read_urb(struct urb *urb)
 	if ((len >= 4) &&
 	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
 	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
-		if (packet[2] == 0x00) {
+		if (packet[2] == 0x00)
 			ssu100_update_lsr(port, packet[3], &flag);
-			if (flag == TTY_OVERRUN)
-				tty_insert_flip_char(&port->port, 0,
-						TTY_OVERRUN);
-		}
 		if (packet[2] == 0x01)
 			ssu100_update_msr(port, packet[3]);
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6091bd5..cb6eff2 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -764,29 +764,39 @@ static int usb_serial_probe(struct usb_interface *interface,
 		if (usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
 			dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
-			bulk_in_endpoint[num_bulk_in] = endpoint;
-			++num_bulk_in;
+			if (num_bulk_in < MAX_NUM_PORTS) {
+				bulk_in_endpoint[num_bulk_in] = endpoint;
+				++num_bulk_in;
+			}
 		}
 
 		if (usb_endpoint_is_bulk_out(endpoint)) {
 			/* we found a bulk out endpoint */
 			dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
-			bulk_out_endpoint[num_bulk_out] = endpoint;
-			++num_bulk_out;
+			if (num_bulk_out < MAX_NUM_PORTS) {
+				bulk_out_endpoint[num_bulk_out] = endpoint;
+				++num_bulk_out;
+			}
 		}
 
 		if (usb_endpoint_is_int_in(endpoint)) {
 			/* we found a interrupt in endpoint */
 			dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
-			interrupt_in_endpoint[num_interrupt_in] = endpoint;
-			++num_interrupt_in;
+			if (num_interrupt_in < MAX_NUM_PORTS) {
+				interrupt_in_endpoint[num_interrupt_in] =
+						endpoint;
+				++num_interrupt_in;
+			}
 		}
 
 		if (usb_endpoint_is_int_out(endpoint)) {
 			/* we found an interrupt out endpoint */
 			dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
-			interrupt_out_endpoint[num_interrupt_out] = endpoint;
-			++num_interrupt_out;
+			if (num_interrupt_out < MAX_NUM_PORTS) {
+				interrupt_out_endpoint[num_interrupt_out] =
+						endpoint;
+				++num_interrupt_out;
+			}
 		}
 	}
 
@@ -809,8 +819,10 @@ static int usb_serial_probe(struct usb_interface *interface,
 				if (usb_endpoint_is_int_in(endpoint)) {
 					/* we found a interrupt in endpoint */
 					dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
-					interrupt_in_endpoint[num_interrupt_in] = endpoint;
-					++num_interrupt_in;
+					if (num_interrupt_in < MAX_NUM_PORTS) {
+						interrupt_in_endpoint[num_interrupt_in] = endpoint;
+						++num_interrupt_in;
+					}
 				}
 			}
 		}
@@ -850,6 +862,11 @@ static int usb_serial_probe(struct usb_interface *interface,
 			num_ports = type->num_ports;
 	}
 
+	if (num_ports > MAX_NUM_PORTS) {
+		dev_warn(ddev, "too many ports requested: %d\n", num_ports);
+		num_ports = MAX_NUM_PORTS;
+	}
+
 	serial->num_ports = num_ports;
 	serial->num_bulk_in = num_bulk_in;
 	serial->num_bulk_out = num_bulk_out;
@@ -1348,10 +1365,12 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 static void usb_serial_deregister(struct usb_serial_driver *device)
 {
 	pr_info("USB Serial deregistering driver %s\n", device->description);
+
 	mutex_lock(&table_lock);
 	list_del(&device->driver_list);
-	usb_serial_bus_deregister(device);
 	mutex_unlock(&table_lock);
+
+	usb_serial_bus_deregister(device);
 }
 
 /**
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 8536578..ad5fff4 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -228,8 +228,10 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 			usb_pipeendpoint(this_urb->pipe), i);
 
 		err = usb_autopm_get_interface_async(port->serial->interface);
-		if (err < 0)
+		if (err < 0) {
+			clear_bit(i, &portdata->out_busy);
 			break;
+		}
 
 		/* send the data */
 		memcpy(this_urb->transfer_buffer, buf, todo);
@@ -386,6 +388,14 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 	portdata = usb_get_serial_port_data(port);
 	intfdata = serial->private;
 
+	if (port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err) {
+			dev_dbg(&port->dev, "%s: submit int urb failed: %d\n",
+				__func__, err);
+		}
+	}
+
 	/* Start reading from the IN endpoint */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
@@ -412,12 +422,26 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 }
 EXPORT_SYMBOL(usb_wwan_open);
 
+static void unbusy_queued_urb(struct urb *urb,
+					struct usb_wwan_port_private *portdata)
+{
+	int i;
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		if (urb == portdata->out_urbs[i]) {
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
 void usb_wwan_close(struct usb_serial_port *port)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_port_private *portdata;
 	struct usb_wwan_intf_private *intfdata = port->serial->private;
+	struct urb *urb;
 
 	portdata = usb_get_serial_port_data(port);
 
@@ -426,10 +450,19 @@ void usb_wwan_close(struct usb_serial_port *port)
 	portdata->opened = 0;
 	spin_unlock_irq(&intfdata->susp_lock);
 
+	for (;;) {
+		urb = usb_get_from_anchor(&portdata->delayed);
+		if (!urb)
+			break;
+		unbusy_queued_urb(urb, portdata);
+		usb_autopm_put_interface_async(serial->interface);
+	}
+
 	for (i = 0; i < N_IN_URB; i++)
 		usb_kill_urb(portdata->in_urbs[i]);
 	for (i = 0; i < N_OUT_URB; i++)
 		usb_kill_urb(portdata->out_urbs[i]);
+	usb_kill_urb(port->interrupt_in_urb);
 
 	/* balancing - important as an error cannot be handled*/
 	usb_autopm_get_interface_no_resume(serial->interface);
@@ -467,9 +500,11 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	struct usb_wwan_port_private *portdata;
 	struct urb *urb;
 	u8 *buffer;
-	int err;
 	int i;
 
+	if (!port->bulk_in_size || !port->bulk_out_size)
+		return -ENODEV;
+
 	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 	if (!portdata)
 		return -ENOMEM;
@@ -477,9 +512,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	init_usb_anchor(&portdata->delayed);
 
 	for (i = 0; i < N_IN_URB; i++) {
-		if (!port->bulk_in_size)
-			break;
-
 		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error;
@@ -493,9 +525,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	}
 
 	for (i = 0; i < N_OUT_URB; i++) {
-		if (!port->bulk_out_size)
-			break;
-
 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error2;
@@ -510,13 +539,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 
 	usb_set_serial_port_data(port, portdata);
 
-	if (port->interrupt_in_urb) {
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (err)
-			dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
-				__func__, err);
-	}
-
 	return 0;
 
 bail_out_error2:
@@ -584,44 +606,29 @@ static void stop_read_write_urbs(struct usb_serial *serial)
 int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 {
 	struct usb_wwan_intf_private *intfdata = serial->private;
-	int b;
 
+	spin_lock_irq(&intfdata->susp_lock);
 	if (PMSG_IS_AUTO(message)) {
-		spin_lock_irq(&intfdata->susp_lock);
-		b = intfdata->in_flight;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		if (b)
+		if (intfdata->in_flight) {
+			spin_unlock_irq(&intfdata->susp_lock);
 			return -EBUSY;
+		}
 	}
-
-	spin_lock_irq(&intfdata->susp_lock);
 	intfdata->suspended = 1;
 	spin_unlock_irq(&intfdata->susp_lock);
+
 	stop_read_write_urbs(serial);
 
 	return 0;
 }
 EXPORT_SYMBOL(usb_wwan_suspend);
 
-static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata)
-{
-	int i;
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		if (urb == portdata->out_urbs[i]) {
-			clear_bit(i, &portdata->out_busy);
-			break;
-		}
-	}
-}
-
-static void play_delayed(struct usb_serial_port *port)
+static int play_delayed(struct usb_serial_port *port)
 {
 	struct usb_wwan_intf_private *data;
 	struct usb_wwan_port_private *portdata;
 	struct urb *urb;
-	int err;
+	int err = 0;
 
 	portdata = usb_get_serial_port_data(port);
 	data = port->serial->private;
@@ -638,6 +645,8 @@ static void play_delayed(struct usb_serial_port *port)
 			break;
 		}
 	}
+
+	return err;
 }
 
 int usb_wwan_resume(struct usb_serial *serial)
@@ -647,54 +656,51 @@ int usb_wwan_resume(struct usb_serial *serial)
 	struct usb_wwan_intf_private *intfdata = serial->private;
 	struct usb_wwan_port_private *portdata;
 	struct urb *urb;
-	int err = 0;
-
-	/* get the interrupt URBs resubmitted unconditionally */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port->interrupt_in_urb) {
-			dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__);
-			continue;
-		}
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
-		dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err);
-		if (err < 0) {
-			dev_err(&port->dev, "%s: Error %d for interrupt URB\n",
-				__func__, err);
-			goto err_out;
-		}
-	}
+	int err;
+	int err_count = 0;
 
+	spin_lock_irq(&intfdata->susp_lock);
 	for (i = 0; i < serial->num_ports; i++) {
 		/* walk all ports */
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
 
 		/* skip closed ports */
-		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata || !portdata->opened) {
-			spin_unlock_irq(&intfdata->susp_lock);
+		if (!portdata || !portdata->opened)
 			continue;
+
+		if (port->interrupt_in_urb) {
+			err = usb_submit_urb(port->interrupt_in_urb,
+					GFP_ATOMIC);
+			if (err) {
+				dev_err(&port->dev,
+					"%s: submit int urb failed: %d\n",
+					__func__, err);
+				err_count++;
+			}
 		}
 
+		err = play_delayed(port);
+		if (err)
+			err_count++;
+
 		for (j = 0; j < N_IN_URB; j++) {
 			urb = portdata->in_urbs[j];
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err < 0) {
 				dev_err(&port->dev, "%s: Error %d for bulk URB %d\n",
 					__func__, err, i);
-				spin_unlock_irq(&intfdata->susp_lock);
-				goto err_out;
+				err_count++;
 			}
 		}
-		play_delayed(port);
-		spin_unlock_irq(&intfdata->susp_lock);
 	}
-	spin_lock_irq(&intfdata->susp_lock);
 	intfdata->suspended = 0;
 	spin_unlock_irq(&intfdata->susp_lock);
-err_out:
-	return err;
+
+	if (err_count)
+		return -EIO;
+
+	return 0;
 }
 EXPORT_SYMBOL(usb_wwan_resume);
 #endif
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 36a7740..cc5a430 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -521,6 +521,10 @@ static void command_port_read_callback(struct urb *urb)
 		dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
 		return;
 	}
+	if (!urb->actual_length) {
+		dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
+		return;
+	}
 	if (status) {
 		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
 		if (status != -ENOENT)
@@ -541,7 +545,8 @@ static void command_port_read_callback(struct urb *urb)
 		/* These are unsolicited reports from the firmware, hence no
 		   waiting command to wakeup */
 		dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
-	} else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
+	} else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
+		(urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
 		memcpy(command_info->result_buffer, &data[1],
 						urb->actual_length - 1);
 		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index eae2c87..88dd32c 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -273,28 +273,8 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 }
 
 static const struct usb_device_id id_table[] = {
-	/* AC8710, AC8710T */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
-	 /* AC8700 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
 	/* MG880 */
 	{ USB_DEVICE(0x19d2, 0xfffd) },
-	{ USB_DEVICE(0x19d2, 0xfffc) },
-	{ USB_DEVICE(0x19d2, 0xfffb) },
-	/* AC8710_V3 */
-	{ USB_DEVICE(0x19d2, 0xfff6) },
-	{ USB_DEVICE(0x19d2, 0xfff7) },
-	{ USB_DEVICE(0x19d2, 0xfff8) },
-	{ USB_DEVICE(0x19d2, 0xfff9) },
-	{ USB_DEVICE(0x19d2, 0xffee) },
-	/* AC2716, MC2716 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
-	/* AD3812 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(0x19d2, 0xffec) },
-	{ USB_DEVICE(0x05C6, 0x3197) },
-	{ USB_DEVICE(0x05C6, 0x6000) },
-	{ USB_DEVICE(0x05C6, 0x9008) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 4ef2a80..008d805 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1851,7 +1851,7 @@ static int usbat_probe(struct usb_interface *intf,
 	us->transport_name = "Shuttle USBAT";
 	us->transport = usbat_flash_transport;
 	us->transport_reset = usb_stor_CB_reset;
-	us->max_lun = 1;
+	us->max_lun = 0;
 
 	result = usb_stor_probe2(us);
 	return result;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 22c7d43..b1d815e 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1118,6 +1118,31 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 		 */
 		if (result == USB_STOR_XFER_LONG)
 			fake_sense = 1;
+
+		/*
+		 * Sometimes a device will mistakenly skip the data phase
+		 * and go directly to the status phase without sending a
+		 * zero-length packet.  If we get a 13-byte response here,
+		 * check whether it really is a CSW.
+		 */
+		if (result == USB_STOR_XFER_SHORT &&
+				srb->sc_data_direction == DMA_FROM_DEVICE &&
+				transfer_length - scsi_get_resid(srb) ==
+					US_BULK_CS_WRAP_LEN) {
+			struct scatterlist *sg = NULL;
+			unsigned int offset = 0;
+
+			if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+					US_BULK_CS_WRAP_LEN, srb, &sg,
+					&offset, FROM_XFER_BUF) ==
+						US_BULK_CS_WRAP_LEN &&
+					bcs->Signature ==
+						cpu_to_le32(US_BULK_CS_SIGN)) {
+				usb_stor_dbg(us, "Device skipped data phase\n");
+				scsi_set_resid(srb, transfer_length);
+				goto skipped_data_phase;
+			}
+		}
 	}
 
 	/* See flow chart on pg 15 of the Bulk Only Transport spec for
@@ -1153,6 +1178,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
+ skipped_data_phase:
 	/* check bulk status */
 	residue = le32_to_cpu(bcs->Residue);
 	usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index d966b59..b8029ec 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -259,7 +259,7 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
 
-	WARN_ON(!spin_is_locked(&devinfo->lock));
+	lockdep_assert_held(&devinfo->lock);
 	if (cmdinfo->state & (COMMAND_INFLIGHT |
 			      DATA_IN_URB_INFLIGHT |
 			      DATA_OUT_URB_INFLIGHT |
@@ -558,7 +558,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	int err;
 
-	WARN_ON(!spin_is_locked(&devinfo->lock));
+	lockdep_assert_held(&devinfo->lock);
 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
 		err = uas_submit_sense_urb(cmnd->device->host, gfp,
 					   cmdinfo->stream);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index adbeb25..16a36b2 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -101,6 +101,12 @@ UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
 		"PhotoSmart R707",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
 
+UNUSUAL_DEV(  0x03f3, 0x0001, 0x0000, 0x9999,
+		"Adaptec",
+		"USBConnect 2000",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
  * for USB floppies that need the SINGLE_LUN enforcement.
@@ -234,6 +240,20 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Daniele Forsi <dforsi@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0350, 0x0350,
+		"Nokia",
+		"5300",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
+/* Patch submitted by Victor A. Santos <victoraur.santos@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x05af, 0x0742, 0x0742,
+		"Nokia",
+		"305",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
 /* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */
 UNUSUAL_DEV(  0x0421, 0x06aa, 0x1110, 0x1110,
 		"Nokia",
@@ -472,18 +492,24 @@ UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 		"eUSB CompactFlash Adapter",
 		USB_SC_8020, USB_PR_CB, NULL, 0),
 
-UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04e6, 0x000b, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
-UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04e6, 0x000c, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
+UNUSUAL_DEV(  0x04e6, 0x000f, 0x0000, 0x9999,
+		"SCM Microsystems",
+		"eUSB SCSI Adapter (Bus Powered)",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"Shuttle",
 		"CD-RW Device",
@@ -727,6 +753,12 @@ UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
+UNUSUAL_DEV(  0x059b, 0x0040, 0x0100, 0x0100,
+		"Iomega",
+		"Jaz USB Adapter",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
+
 /* Reported by <Hendryk.Pfeiffer@gmx.de> */
 UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
 		"LaCie",
@@ -1067,6 +1099,13 @@ UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x084b, 0xa001, 0x0000, 0x9999,
+		"Castlewood Systems",
+		"USB to SCSI cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1099,6 +1138,18 @@ UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE),
 
+UNUSUAL_DEV(  0x085a, 0x0026, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB-SCSI (Mac USB Dock)",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV(  0x085a, 0x0028, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Submitted by Jan De Luyck <lkml@kcore.org> */
 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		"CITIZEN",
@@ -1931,6 +1982,14 @@ UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
 
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
+		"Entrega Technologies",
+		"USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Robert Schedel <r.schedel@yahoo.de>
  * Note: this is a 'super top' device like the above 14cd/6600 device */
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
@@ -1953,6 +2012,12 @@ UNUSUAL_DEV(  0x177f, 0x0400, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+UNUSUAL_DEV(  0x1822, 0x0001, 0x0000, 0x9999,
+		"Ariston Technologies",
+		"iConnect USB to SCSI adapter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software
@@ -1998,6 +2063,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x9999,
+		"Double-H Technology",
+		"USB to SCSI Intelligent Cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",