summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-05-24 14:58:28 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2010-05-24 14:58:28 (GMT)
commit0fed2b5cb4c04336b26b0cbf6f9a8c07081f79a6 (patch)
treea9be0f082d3c2f53eb2d5f9de9ad900c31236b34 /drivers
parent0163916f1db7f345963dad1af78b7628c759c6ee (diff)
parent41ec7ebee14189a0424176279c227168960c28ad (diff)
downloadlinux-fsl-qoriq-0fed2b5cb4c04336b26b0cbf6f9a8c07081f79a6.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/shdma.c5
-rw-r--r--drivers/mfd/Kconfig6
-rw-r--r--drivers/mfd/sh_mobile_sdhi.c28
-rw-r--r--drivers/mmc/host/tmio_mmc.c367
-rw-r--r--drivers/mmc/host/tmio_mmc.h13
-rw-r--r--drivers/serial/sh-sci.c5
6 files changed, 387 insertions, 37 deletions
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index a172752..a2a519f 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -722,6 +722,10 @@ static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan, bool all)
{
while (__ld_cleanup(sh_chan, all))
;
+
+ if (all)
+ /* Terminating - forgive uncompleted cookies */
+ sh_chan->completed_cookie = sh_chan->common.cookie;
}
static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
@@ -1188,6 +1192,7 @@ static struct platform_driver sh_dmae_driver = {
.remove = __exit_p(sh_dmae_remove),
.shutdown = sh_dmae_shutdown,
.driver = {
+ .owner = THIS_MODULE,
.name = "sh-dma-engine",
},
};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de3e74c..3c6a986 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -49,6 +49,7 @@ config MFD_SH_MOBILE_SDHI
bool "Support for SuperH Mobile SDHI"
depends on SUPERH || ARCH_SHMOBILE
select MFD_CORE
+ select TMIO_MMC_DMA
---help---
This driver supports the SDHI hardware block found in many
SuperH Mobile SoCs.
@@ -162,6 +163,11 @@ config MFD_TMIO
bool
default n
+config TMIO_MMC_DMA
+ bool
+ select DMA_ENGINE
+ select DMADEVICES
+
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
depends on ARM && HAVE_CLK
diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c
index 497f91b..cd16459 100644
--- a/drivers/mfd/sh_mobile_sdhi.c
+++ b/drivers/mfd/sh_mobile_sdhi.c
@@ -26,11 +26,15 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tmio.h>
#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/sh_dma.h>
struct sh_mobile_sdhi {
struct clk *clk;
struct tmio_mmc_data mmc_data;
struct mfd_cell cell_mmc;
+ struct sh_dmae_slave param_tx;
+ struct sh_dmae_slave param_rx;
+ struct tmio_mmc_dma dma_priv;
};
static struct resource sh_mobile_sdhi_resources[] = {
@@ -64,6 +68,8 @@ static void sh_mobile_sdhi_set_pwr(struct platform_device *tmio, int state)
static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
{
struct sh_mobile_sdhi *priv;
+ struct tmio_mmc_data *mmc_data;
+ struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
struct resource *mem;
char clk_name[8];
int ret, irq;
@@ -85,6 +91,8 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ mmc_data = &priv->mmc_data;
+
snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
priv->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(priv->clk)) {
@@ -96,12 +104,24 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
clk_enable(priv->clk);
- priv->mmc_data.hclk = clk_get_rate(priv->clk);
- priv->mmc_data.set_pwr = sh_mobile_sdhi_set_pwr;
- priv->mmc_data.capabilities = MMC_CAP_MMC_HIGHSPEED;
+ mmc_data->hclk = clk_get_rate(priv->clk);
+ mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
+ mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
+ if (p) {
+ mmc_data->flags = p->tmio_flags;
+ mmc_data->ocr_mask = p->tmio_ocr_mask;
+ }
+
+ if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+ priv->param_tx.slave_id = p->dma_slave_tx;
+ priv->param_rx.slave_id = p->dma_slave_rx;
+ priv->dma_priv.chan_priv_tx = &priv->param_tx;
+ priv->dma_priv.chan_priv_rx = &priv->param_rx;
+ mmc_data->dma = &priv->dma_priv;
+ }
memcpy(&priv->cell_mmc, &sh_mobile_sdhi_cell, sizeof(priv->cell_mmc));
- priv->cell_mmc.driver_data = &priv->mmc_data;
+ priv->cell_mmc.driver_data = mmc_data;
priv->cell_mmc.platform_data = &priv->cell_mmc;
priv->cell_mmc.data_size = sizeof(priv->cell_mmc);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index b2b577f..883fcac 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -29,6 +29,7 @@
#include <linux/irq.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
#include <linux/mmc/host.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tmio.h>
@@ -131,8 +132,8 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
host->cmd = cmd;
-/* FIXME - this seems to be ok comented out but the spec suggest this bit should
- * be set when issuing app commands.
+/* FIXME - this seems to be ok commented out but the spec suggest this bit
+ * should be set when issuing app commands.
* if(cmd->flags & MMC_FLAG_ACMD)
* c |= APP_CMD;
*/
@@ -155,12 +156,12 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
return 0;
}
-/* This chip always returns (at least?) as much data as you ask for.
+/*
+ * This chip always returns (at least?) as much data as you ask for.
* I'm unsure what happens if you ask for less than a block. This should be
* looked into to ensure that a funny length read doesnt hose the controller.
- *
*/
-static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
{
struct mmc_data *data = host->data;
unsigned short *buf;
@@ -180,7 +181,7 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
count = data->blksz;
pr_debug("count: %08x offset: %08x flags %08x\n",
- count, host->sg_off, data->flags);
+ count, host->sg_off, data->flags);
/* Transfer the data */
if (data->flags & MMC_DATA_READ)
@@ -198,7 +199,7 @@ static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
return;
}
-static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
{
struct mmc_data *data = host->data;
struct mmc_command *stop;
@@ -206,7 +207,7 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
host->data = NULL;
if (!data) {
- pr_debug("Spurious data end IRQ\n");
+ dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
return;
}
stop = data->stop;
@@ -219,7 +220,8 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
pr_debug("Completed data request\n");
- /*FIXME - other drivers allow an optional stop command of any given type
+ /*
+ * FIXME: other drivers allow an optional stop command of any given type
* which we dont do, as the chip can auto generate them.
* Perhaps we can be smarter about when to use auto CMD12 and
* only issue the auto request when we know this is the desired
@@ -227,10 +229,17 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
* upper layers expect. For now, we do what works.
*/
- if (data->flags & MMC_DATA_READ)
- disable_mmc_irqs(host, TMIO_MASK_READOP);
- else
- disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+ if (data->flags & MMC_DATA_READ) {
+ if (!host->chan_rx)
+ disable_mmc_irqs(host, TMIO_MASK_READOP);
+ dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
+ host->mrq);
+ } else {
+ if (!host->chan_tx)
+ disable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+ dev_dbg(&host->pdev->dev, "Complete Tx request %p\n",
+ host->mrq);
+ }
if (stop) {
if (stop->opcode == 12 && !stop->arg)
@@ -242,7 +251,35 @@ static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
tmio_mmc_finish_request(host);
}
-static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+ struct mmc_data *data = host->data;
+
+ if (!data)
+ return;
+
+ if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) {
+ /*
+ * Has all data been written out yet? Testing on SuperH showed,
+ * that in most cases the first interrupt comes already with the
+ * BUSY status bit clear, but on some operations, like mount or
+ * in the beginning of a write / sync / umount, there is one
+ * DATAEND interrupt with the BUSY bit set, in this cases
+ * waiting for one more interrupt fixes the problem.
+ */
+ if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
+ disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+ tasklet_schedule(&host->dma_complete);
+ }
+ } else if (host->chan_rx && (data->flags & MMC_DATA_READ)) {
+ disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+ tasklet_schedule(&host->dma_complete);
+ } else {
+ tmio_mmc_do_data_irq(host);
+ }
+}
+
+static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
unsigned int stat)
{
struct mmc_command *cmd = host->cmd;
@@ -282,10 +319,16 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
* If theres no data or we encountered an error, finish now.
*/
if (host->data && !cmd->error) {
- if (host->data->flags & MMC_DATA_READ)
- enable_mmc_irqs(host, TMIO_MASK_READOP);
- else
- enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+ if (host->data->flags & MMC_DATA_READ) {
+ if (!host->chan_rx)
+ enable_mmc_irqs(host, TMIO_MASK_READOP);
+ } else {
+ struct dma_chan *chan = host->chan_tx;
+ if (!chan)
+ enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
+ else
+ tasklet_schedule(&host->dma_issue);
+ }
} else {
tmio_mmc_finish_request(host);
}
@@ -293,7 +336,6 @@ static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
return;
}
-
static irqreturn_t tmio_mmc_irq(int irq, void *devid)
{
struct tmio_mmc_host *host = devid;
@@ -311,7 +353,7 @@ static irqreturn_t tmio_mmc_irq(int irq, void *devid)
if (!ireg) {
disable_mmc_irqs(host, status & ~irq_mask);
- pr_debug("tmio_mmc: Spurious irq, disabling! "
+ pr_warning("tmio_mmc: Spurious irq, disabling! "
"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
pr_debug_status(status);
@@ -363,16 +405,265 @@ out:
return IRQ_HANDLED;
}
+#ifdef CONFIG_TMIO_MMC_DMA
+static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
+{
+#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
+ /* Switch DMA mode on or off - SuperH specific? */
+ sd_ctrl_write16(host, 0xd8, enable ? 2 : 0);
+#endif
+}
+
+static void tmio_dma_complete(void *arg)
+{
+ struct tmio_mmc_host *host = arg;
+
+ dev_dbg(&host->pdev->dev, "Command completed\n");
+
+ if (!host->data)
+ dev_warn(&host->pdev->dev, "NULL data in DMA completion!\n");
+ else
+ enable_mmc_irqs(host, TMIO_STAT_DATAEND);
+}
+
+static int tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
+{
+ struct scatterlist *sg = host->sg_ptr;
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *chan = host->chan_rx;
+ int ret;
+
+ ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE);
+ if (ret > 0) {
+ host->dma_sglen = ret;
+ desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+ DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ }
+
+ if (desc) {
+ host->desc = desc;
+ desc->callback = tmio_dma_complete;
+ desc->callback_param = host;
+ host->cookie = desc->tx_submit(desc);
+ if (host->cookie < 0) {
+ host->desc = NULL;
+ ret = host->cookie;
+ } else {
+ chan->device->device_issue_pending(chan);
+ }
+ }
+ dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
+ __func__, host->sg_len, ret, host->cookie, host->mrq);
+
+ if (!host->desc) {
+ /* DMA failed, fall back to PIO */
+ if (ret >= 0)
+ ret = -EIO;
+ host->chan_rx = NULL;
+ dma_release_channel(chan);
+ /* Free the Tx channel too */
+ chan = host->chan_tx;
+ if (chan) {
+ host->chan_tx = NULL;
+ dma_release_channel(chan);
+ }
+ dev_warn(&host->pdev->dev,
+ "DMA failed: %d, falling back to PIO\n", ret);
+ tmio_mmc_enable_dma(host, false);
+ reset(host);
+ /* Fail this request, let above layers recover */
+ host->mrq->cmd->error = ret;
+ tmio_mmc_finish_request(host);
+ }
+
+ dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__,
+ desc, host->cookie, host->sg_len);
+
+ return ret > 0 ? 0 : ret;
+}
+
+static int tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
+{
+ struct scatterlist *sg = host->sg_ptr;
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *chan = host->chan_tx;
+ int ret;
+
+ ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE);
+ if (ret > 0) {
+ host->dma_sglen = ret;
+ desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+ DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ }
+
+ if (desc) {
+ host->desc = desc;
+ desc->callback = tmio_dma_complete;
+ desc->callback_param = host;
+ host->cookie = desc->tx_submit(desc);
+ if (host->cookie < 0) {
+ host->desc = NULL;
+ ret = host->cookie;
+ }
+ }
+ dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
+ __func__, host->sg_len, ret, host->cookie, host->mrq);
+
+ if (!host->desc) {
+ /* DMA failed, fall back to PIO */
+ if (ret >= 0)
+ ret = -EIO;
+ host->chan_tx = NULL;
+ dma_release_channel(chan);
+ /* Free the Rx channel too */
+ chan = host->chan_rx;
+ if (chan) {
+ host->chan_rx = NULL;
+ dma_release_channel(chan);
+ }
+ dev_warn(&host->pdev->dev,
+ "DMA failed: %d, falling back to PIO\n", ret);
+ tmio_mmc_enable_dma(host, false);
+ reset(host);
+ /* Fail this request, let above layers recover */
+ host->mrq->cmd->error = ret;
+ tmio_mmc_finish_request(host);
+ }
+
+ dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__,
+ desc, host->cookie);
+
+ return ret > 0 ? 0 : ret;
+}
+
+static int tmio_mmc_start_dma(struct tmio_mmc_host *host,
+ struct mmc_data *data)
+{
+ if (data->flags & MMC_DATA_READ) {
+ if (host->chan_rx)
+ return tmio_mmc_start_dma_rx(host);
+ } else {
+ if (host->chan_tx)
+ return tmio_mmc_start_dma_tx(host);
+ }
+
+ return 0;
+}
+
+static void tmio_issue_tasklet_fn(unsigned long priv)
+{
+ struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv;
+ struct dma_chan *chan = host->chan_tx;
+
+ chan->device->device_issue_pending(chan);
+}
+
+static void tmio_tasklet_fn(unsigned long arg)
+{
+ struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg;
+
+ if (host->data->flags & MMC_DATA_READ)
+ dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen,
+ DMA_FROM_DEVICE);
+ else
+ dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen,
+ DMA_TO_DEVICE);
+
+ tmio_mmc_do_data_irq(host);
+}
+
+/* It might be necessary to make filter MFD specific */
+static bool tmio_mmc_filter(struct dma_chan *chan, void *arg)
+{
+ dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg);
+ chan->private = arg;
+ return true;
+}
+
+static void tmio_mmc_request_dma(struct tmio_mmc_host *host,
+ struct tmio_mmc_data *pdata)
+{
+ host->cookie = -EINVAL;
+ host->desc = NULL;
+
+ /* We can only either use DMA for both Tx and Rx or not use it at all */
+ if (pdata->dma) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->chan_tx = dma_request_channel(mask, tmio_mmc_filter,
+ pdata->dma->chan_priv_tx);
+ dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__,
+ host->chan_tx);
+
+ if (!host->chan_tx)
+ return;
+
+ host->chan_rx = dma_request_channel(mask, tmio_mmc_filter,
+ pdata->dma->chan_priv_rx);
+ dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__,
+ host->chan_rx);
+
+ if (!host->chan_rx) {
+ dma_release_channel(host->chan_tx);
+ host->chan_tx = NULL;
+ return;
+ }
+
+ tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host);
+ tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host);
+
+ tmio_mmc_enable_dma(host, true);
+ }
+}
+
+static void tmio_mmc_release_dma(struct tmio_mmc_host *host)
+{
+ if (host->chan_tx) {
+ struct dma_chan *chan = host->chan_tx;
+ host->chan_tx = NULL;
+ dma_release_channel(chan);
+ }
+ if (host->chan_rx) {
+ struct dma_chan *chan = host->chan_rx;
+ host->chan_rx = NULL;
+ dma_release_channel(chan);
+ }
+
+ host->cookie = -EINVAL;
+ host->desc = NULL;
+}
+#else
+static int tmio_mmc_start_dma(struct tmio_mmc_host *host,
+ struct mmc_data *data)
+{
+ return 0;
+}
+
+static void tmio_mmc_request_dma(struct tmio_mmc_host *host,
+ struct tmio_mmc_data *pdata)
+{
+ host->chan_tx = NULL;
+ host->chan_rx = NULL;
+}
+
+static void tmio_mmc_release_dma(struct tmio_mmc_host *host)
+{
+}
+#endif
+
static int tmio_mmc_start_data(struct tmio_mmc_host *host,
struct mmc_data *data)
{
pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
- data->blksz, data->blocks);
+ data->blksz, data->blocks);
/* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */
if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
- printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n",
- mmc_hostname(host->mmc), data->blksz);
+ pr_err("%s: %d byte block unsupported in 4 bit mode\n",
+ mmc_hostname(host->mmc), data->blksz);
return -EINVAL;
}
@@ -383,7 +674,7 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
- return 0;
+ return tmio_mmc_start_dma(host, data);
}
/* Process requests from the MMC layer */
@@ -404,7 +695,6 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
}
ret = tmio_mmc_start_command(host, mrq->cmd);
-
if (!ret)
return;
@@ -458,11 +748,14 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
static int tmio_mmc_get_ro(struct mmc_host *mmc)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct mfd_cell *cell = host->pdev->dev.platform_data;
+ struct tmio_mmc_data *pdata = cell->driver_data;
- return (sd_ctrl_read16(host, CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+ return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1;
}
-static struct mmc_host_ops tmio_mmc_ops = {
+static const struct mmc_host_ops tmio_mmc_ops = {
.request = tmio_mmc_request,
.set_ios = tmio_mmc_set_ios,
.get_ro = tmio_mmc_get_ro,
@@ -515,6 +808,7 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
struct tmio_mmc_host *host;
struct mmc_host *mmc;
int ret = -EINVAL;
+ u32 irq_mask = TMIO_MASK_CMD;
if (dev->num_resources != 2)
goto out;
@@ -553,7 +847,10 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
mmc->caps |= pdata->capabilities;
mmc->f_max = pdata->hclk;
mmc->f_min = mmc->f_max / 512;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (pdata->ocr_mask)
+ mmc->ocr_avail = pdata->ocr_mask;
+ else
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
/* Tell the MFD core we are ready to be enabled */
if (cell->enable) {
@@ -578,13 +875,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
if (ret)
goto cell_disable;
+ /* See if we also get DMA */
+ tmio_mmc_request_dma(host, pdata);
+
mmc_add_host(mmc);
- printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
- (unsigned long)host->ctl, host->irq);
+ pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+ (unsigned long)host->ctl, host->irq);
/* Unmask the IRQs we want to know about */
- enable_mmc_irqs(host, TMIO_MASK_IRQ);
+ if (!host->chan_rx)
+ irq_mask |= TMIO_MASK_READOP;
+ if (!host->chan_tx)
+ irq_mask |= TMIO_MASK_WRITEOP;
+ enable_mmc_irqs(host, irq_mask);
return 0;
@@ -609,6 +913,7 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev)
if (mmc) {
struct tmio_mmc_host *host = mmc_priv(mmc);
mmc_remove_host(mmc);
+ tmio_mmc_release_dma(host);
free_irq(host->irq, host);
if (cell->disable)
cell->disable(dev);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index dafecfb..64f7d5d 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -10,6 +10,8 @@
*/
#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
#define CTL_SD_CMD 0x00
#define CTL_ARG_REG 0x04
@@ -106,6 +108,17 @@ struct tmio_mmc_host {
unsigned int sg_off;
struct platform_device *pdev;
+
+ /* DMA support */
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_tx;
+ struct tasklet_struct dma_complete;
+ struct tasklet_struct dma_issue;
+#ifdef CONFIG_TMIO_MMC_DMA
+ struct dma_async_tx_descriptor *desc;
+ unsigned int dma_sglen;
+ dma_cookie_t cookie;
+#endif
};
#include <linux/io.h>
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 4f73fb7..5f90fcd 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1004,8 +1004,9 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
s->chan_rx = NULL;
s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
dma_release_channel(chan);
- dma_free_coherent(port->dev, s->buf_len_rx * 2,
- sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
+ if (sg_dma_address(&s->sg_rx[0]))
+ dma_free_coherent(port->dev, s->buf_len_rx * 2,
+ sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
if (enable_pio)
sci_start_rx(port);
}