drm/i915: Add eDP support for Valleyview

Eventhough Valleyview display block is derived from Cantiga, VLV
supports eDP. So, added eDP checks in i9xx_crtc_mode_set path.

v2: use different DPIO_DIVISOR values for VGA, DP and eDP
v3: fix DPIO value calculation to use same values for all display
interfaces
v4: removed unconditional enabling of 6bpc dithering based on comments
from Daniel & Jani Nikula. Also changed the display enabling order to
force eDP detection first.

Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

2 files changed, 24 insertions, 8 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6458f95..e9c1f3c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4415,6 +4415,14 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
+	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
+		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+			pipeconf |= PIPECONF_BPP_6 |
+					PIPECONF_ENABLE |
+					I965_PIPECONF_ACTIVE;
+		}
+	}
+
 	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
 	drm_mode_debug_printmodeline(mode);
 
@@ -7673,6 +7681,10 @@ static void intel_setup_outputs(struct drm_device *dev)
 	} else if (IS_VALLEYVIEW(dev)) {
 		int found;
 
+		/* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
+		if (I915_READ(DP_C) & DP_DETECTED)
+			intel_dp_init(dev, DP_C, PORT_C);
+
 		if (I915_READ(SDVOB) & PORT_DETECTED) {
 			/* SDVOB multiplex with HDMIB */
 			found = intel_sdvo_init(dev, SDVOB, true);
@@ -7685,9 +7697,6 @@ static void intel_setup_outputs(struct drm_device *dev)
 		if (I915_READ(SDVOC) & PORT_DETECTED)
 			intel_hdmi_init(dev, SDVOC, PORT_C);
 
-		/* Shares lanes with HDMI on SDVOC */
-		if (I915_READ(DP_C) & DP_DETECTED)
-			intel_dp_init(dev, DP_C, PORT_C);
 	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
 		bool found = false;
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7fe9b9c..fcce392 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -886,7 +886,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 
 	/* Split out the IBX/CPU vs CPT settings */
 
-	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+	if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
 		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 			intel_dp->DP |= DP_SYNC_HS_HIGH;
 		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
@@ -1475,7 +1475,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
 {
 	struct drm_device *dev = intel_dp->base.base.dev;
 
-	if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+	if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
 		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
 		case DP_TRAIN_VOLTAGE_SWING_400:
 			return DP_TRAIN_PRE_EMPHASIS_6;
@@ -1774,7 +1774,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 		uint32_t    signal_levels;
 
 
-		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
 			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
 		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
@@ -1860,7 +1860,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			break;
 		}
 
-		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
 			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
 		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
@@ -2517,7 +2517,14 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 		if (intel_dpd_is_edp(dev))
 			intel_dp->is_pch_edp = true;
 
-	if (output_reg == DP_A || is_pch_edp(intel_dp)) {
+	/*
+	 * FIXME : We need to initialize built-in panels before external panels.
+	 * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup
+	 */
+	if (IS_VALLEYVIEW(dev) && output_reg == DP_C) {
+		type = DRM_MODE_CONNECTOR_eDP;
+		intel_encoder->type = INTEL_OUTPUT_EDP;
+	} else if (output_reg == DP_A || is_pch_edp(intel_dp)) {
 		type = DRM_MODE_CONNECTOR_eDP;
 		intel_encoder->type = INTEL_OUTPUT_EDP;
 	} else {