USB: move common alchemy USB routines to arch/mips/alchemy/common.c

A previous patch converted the Alchemy platform to use the OHCI and EHCI
platform drivers. As a result, all the common logic to handle USB present in
drivers/usb/host/alchemy-common.c has no reason to remain here, so we move it
to arch/mips/alchemy/common/usb.c which is a more appropriate place. This
change was suggested by Manuel Lauss.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 0 insertions, 615 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 9e0a89c..332ed89 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -40,6 +40,5 @@ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
 obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
deleted file mode 100644
index 936af83..0000000
--- a/drivers/usb/host/alchemy-common.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- * USB block power/access management abstraction.
- *
- * Au1000+: The OHCI block control register is at the far end of the OHCI memory
- *	    area. Au1550 has OHCI on different base address. No need to handle
- *	    UDC here.
- * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
- *	    as well as the PHY for EHCI and UDC.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
-#include <asm/mach-au1x00/au1000.h>
-
-/* control register offsets */
-#define AU1000_OHCICFG	0x7fffc
-#define AU1550_OHCICFG	0x07ffc
-#define AU1200_USBCFG	0x04
-
-/* Au1000 USB block config bits */
-#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
-#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
-#define USBHEN_E	(1 << 2)		/* OHCI block enable */
-#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
-#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
-
-/* Au1200 USB config bits */
-#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
-#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
-#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
-#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
-#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
-#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
-#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
-#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
-#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
-#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
-#define USBCFG_GME	(1 << 6)		/* OTG mem access */
-#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
-#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
-#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
-#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
-#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
-#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
-#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
-				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
-				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
-				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
-				 USBCFG_OME)
-
-/* Au1300 USB config registers */
-#define USB_DWC_CTRL1		0x00
-#define USB_DWC_CTRL2		0x04
-#define USB_VBUS_TIMER		0x10
-#define USB_SBUS_CTRL		0x14
-#define USB_MSR_ERR		0x18
-#define USB_DWC_CTRL3		0x1C
-#define USB_DWC_CTRL4		0x20
-#define USB_OTG_STATUS		0x28
-#define USB_DWC_CTRL5		0x2C
-#define USB_DWC_CTRL6		0x30
-#define USB_DWC_CTRL7		0x34
-#define USB_PHY_STATUS		0xC0
-#define USB_INT_STATUS		0xC4
-#define USB_INT_ENABLE		0xC8
-
-#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
-#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
-#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */
-
-#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
-#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
-#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */
-
-#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
-#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
-#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
-#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)
-
-#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */
-
-#define USB_INTEN_FORCE			0x20
-#define USB_INTEN_PHY			0x10
-#define USB_INTEN_UDC			0x08
-#define USB_INTEN_EHCI			0x04
-#define USB_INTEN_OHCI1			0x02
-#define USB_INTEN_OHCI0			0x01
-
-static DEFINE_SPINLOCK(alchemy_usb_lock);
-
-static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
-{
-	unsigned long r, s;
-
-	r = __raw_readl(base + USB_DWC_CTRL2);
-	s = __raw_readl(base + USB_DWC_CTRL3);
-
-	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
-		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
-
-	if (enable) {
-		/* simply enable all PHYs */
-		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
-		     USB_DWC_CTRL2_PHYRS;
-		__raw_writel(r, base + USB_DWC_CTRL2);
-		wmb();
-	} else if (!s) {
-		/* no USB block active, do disable all PHYs */
-		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
-		       USB_DWC_CTRL2_PHYRS);
-		__raw_writel(r, base + USB_DWC_CTRL2);
-		wmb();
-	}
-}
-
-static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
-{
-	unsigned long r;
-
-	if (enable) {
-		__raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
-		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
-			       : USB_DWC_CTRL3_OHCI1_CKEN;
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */
-
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-
-		/* reset the OHCI start clock bit */
-		__raw_writel(0, base + USB_DWC_CTRL7);
-		wmb();
-	} else {
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL3);
-		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
-				 : USB_DWC_CTRL3_OHCI1_CKEN);
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-	}
-}
-
-static inline void __au1300_ehci_control(void __iomem *base, int enable)
-{
-	unsigned long r;
-
-	if (enable) {
-		r = __raw_readl(base + USB_DWC_CTRL3);
-		r |= USB_DWC_CTRL3_EHCI0_CKEN;
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r |= USB_DWC_CTRL1_HSTRS;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r |= USB_INTEN_EHCI;
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-	} else {
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r &= ~USB_INTEN_EHCI;
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r &= ~USB_DWC_CTRL1_HSTRS;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL3);
-		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-	}
-}
-
-static inline void __au1300_udc_control(void __iomem *base, int enable)
-{
-	unsigned long r;
-
-	if (enable) {
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r |= USB_DWC_CTRL1_DCRS;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r |= USB_INTEN_UDC;
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-	} else {
-		r = __raw_readl(base + USB_INT_ENABLE);
-		r &= ~USB_INTEN_UDC;
-		__raw_writel(r, base + USB_INT_ENABLE);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r &= ~USB_DWC_CTRL1_DCRS;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-	}
-}
-
-static inline void __au1300_otg_control(void __iomem *base, int enable)
-{
-	unsigned long r;
-	if (enable) {
-		r = __raw_readl(base + USB_DWC_CTRL3);
-		r |= USB_DWC_CTRL3_OTG0_CKEN;
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r &= ~USB_DWC_CTRL1_OTGD;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-	} else {
-		r = __raw_readl(base + USB_DWC_CTRL1);
-		r |= USB_DWC_CTRL1_OTGD;
-		__raw_writel(r, base + USB_DWC_CTRL1);
-		wmb();
-
-		r = __raw_readl(base + USB_DWC_CTRL3);
-		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
-		__raw_writel(r, base + USB_DWC_CTRL3);
-		wmb();
-
-		__au1300_usb_phyctl(base, enable);
-	}
-}
-
-static inline int au1300_usb_control(int block, int enable)
-{
-	void __iomem *base =
-		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-	int ret = 0;
-
-	switch (block) {
-	case ALCHEMY_USB_OHCI0:
-		__au1300_ohci_control(base, enable, 0);
-		break;
-	case ALCHEMY_USB_OHCI1:
-		__au1300_ohci_control(base, enable, 1);
-		break;
-	case ALCHEMY_USB_EHCI0:
-		__au1300_ehci_control(base, enable);
-		break;
-	case ALCHEMY_USB_UDC0:
-		__au1300_udc_control(base, enable);
-		break;
-	case ALCHEMY_USB_OTG0:
-		__au1300_otg_control(base, enable);
-		break;
-	default:
-		ret = -ENODEV;
-	}
-	return ret;
-}
-
-static inline void au1300_usb_init(void)
-{
-	void __iomem *base =
-		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-
-	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
-	 * here at all: Port 2 routing (EHCI or UDC) must be set either
-	 * by boot firmware or platform init code; I can't autodetect
-	 * a sane setting.
-	 */
-	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
-	wmb();
-	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
-	wmb();
-	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
-	wmb();
-	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
-	wmb();
-	/* set coherent access bit */
-	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
-	wmb();
-}
-
-static inline void __au1200_ohci_control(void __iomem *base, int enable)
-{
-	unsigned long r = __raw_readl(base + AU1200_USBCFG);
-	if (enable) {
-		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
-		wmb();
-		udelay(2000);
-	} else {
-		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
-		wmb();
-		udelay(1000);
-	}
-}
-
-static inline void __au1200_ehci_control(void __iomem *base, int enable)
-{
-	unsigned long r = __raw_readl(base + AU1200_USBCFG);
-	if (enable) {
-		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
-		wmb();
-		udelay(1000);
-	} else {
-		if (!(r & USBCFG_UCE))		/* UDC also off? */
-			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
-		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
-		wmb();
-		udelay(1000);
-	}
-}
-
-static inline void __au1200_udc_control(void __iomem *base, int enable)
-{
-	unsigned long r = __raw_readl(base + AU1200_USBCFG);
-	if (enable) {
-		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
-		wmb();
-	} else {
-		if (!(r & USBCFG_ECE))		/* EHCI also off? */
-			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
-		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
-		wmb();
-	}
-}
-
-static inline int au1200_coherency_bug(void)
-{
-#if defined(CONFIG_DMA_COHERENT)
-	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
-		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
-		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
-				 " the kernel\n");
-		return -ENODEV;
-	}
-#endif
-	return 0;
-}
-
-static inline int au1200_usb_control(int block, int enable)
-{
-	void __iomem *base =
-			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
-	int ret = 0;
-
-	switch (block) {
-	case ALCHEMY_USB_OHCI0:
-		ret = au1200_coherency_bug();
-		if (ret && enable)
-			goto out;
-		__au1200_ohci_control(base, enable);
-		break;
-	case ALCHEMY_USB_UDC0:
-		__au1200_udc_control(base, enable);
-		break;
-	case ALCHEMY_USB_EHCI0:
-		ret = au1200_coherency_bug();
-		if (ret && enable)
-			goto out;
-		__au1200_ehci_control(base, enable);
-		break;
-	default:
-		ret = -ENODEV;
-	}
-out:
-	return ret;
-}
-
-
-/* initialize USB block(s) to a known working state */
-static inline void au1200_usb_init(void)
-{
-	void __iomem *base =
-			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
-	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
-	wmb();
-	udelay(1000);
-}
-
-static inline void au1000_usb_init(unsigned long rb, int reg)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
-	unsigned long r = __raw_readl(base);
-
-#if defined(__BIG_ENDIAN)
-	r |= USBHEN_BE;
-#endif
-	r |= USBHEN_C;
-
-	__raw_writel(r, base);
-	wmb();
-	udelay(1000);
-}
-
-
-static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
-	unsigned long r = __raw_readl(base + creg);
-
-	if (enable) {
-		__raw_writel(r | USBHEN_CE, base + creg);
-		wmb();
-		udelay(1000);
-		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
-		wmb();
-		udelay(1000);
-
-		/* wait for reset complete (read reg twice: au1500 erratum) */
-		while (__raw_readl(base + creg),
-			!(__raw_readl(base + creg) & USBHEN_RD))
-			udelay(1000);
-	} else {
-		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
-		wmb();
-	}
-}
-
-static inline int au1000_usb_control(int block, int enable, unsigned long rb,
-				     int creg)
-{
-	int ret = 0;
-
-	switch (block) {
-	case ALCHEMY_USB_OHCI0:
-		__au1xx0_ohci_control(enable, rb, creg);
-		break;
-	default:
-		ret = -ENODEV;
-	}
-	return ret;
-}
-
-/*
- * alchemy_usb_control - control Alchemy on-chip USB blocks
- * @block:	USB block to target
- * @enable:	set 1 to enable a block, 0 to disable
- */
-int alchemy_usb_control(int block, int enable)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&alchemy_usb_lock, flags);
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1000:
-	case ALCHEMY_CPU_AU1500:
-	case ALCHEMY_CPU_AU1100:
-		ret = au1000_usb_control(block, enable,
-				AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
-		break;
-	case ALCHEMY_CPU_AU1550:
-		ret = au1000_usb_control(block, enable,
-				AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
-		break;
-	case ALCHEMY_CPU_AU1200:
-		ret = au1200_usb_control(block, enable);
-		break;
-	case ALCHEMY_CPU_AU1300:
-		ret = au1300_usb_control(block, enable);
-		break;
-	default:
-		ret = -ENODEV;
-	}
-	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(alchemy_usb_control);
-
-
-static unsigned long alchemy_usb_pmdata[2];
-
-static void au1000_usb_pm(unsigned long br, int creg, int susp)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
-
-	if (susp) {
-		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
-		/* There appears to be some undocumented reset register.... */
-		__raw_writel(0, base + 0x04);
-		wmb();
-		__raw_writel(0, base + creg);
-		wmb();
-	} else {
-		__raw_writel(alchemy_usb_pmdata[0], base + creg);
-		wmb();
-	}
-}
-
-static void au1200_usb_pm(int susp)
-{
-	void __iomem *base =
-			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
-	if (susp) {
-		/* save OTG_CAP/MUX registers which indicate port routing */
-		/* FIXME: write an OTG driver to do that */
-		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
-		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
-	} else {
-		/* restore access to all MMIO areas */
-		au1200_usb_init();
-
-		/* restore OTG_CAP/MUX registers */
-		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
-		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
-		wmb();
-	}
-}
-
-static void au1300_usb_pm(int susp)
-{
-	void __iomem *base =
-			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
-	/* remember Port2 routing */
-	if (susp) {
-		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
-	} else {
-		au1300_usb_init();
-		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
-		wmb();
-	}
-}
-
-static void alchemy_usb_pm(int susp)
-{
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1000:
-	case ALCHEMY_CPU_AU1500:
-	case ALCHEMY_CPU_AU1100:
-		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
-		break;
-	case ALCHEMY_CPU_AU1550:
-		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
-		break;
-	case ALCHEMY_CPU_AU1200:
-		au1200_usb_pm(susp);
-		break;
-	case ALCHEMY_CPU_AU1300:
-		au1300_usb_pm(susp);
-		break;
-	}
-}
-
-static int alchemy_usb_suspend(void)
-{
-	alchemy_usb_pm(1);
-	return 0;
-}
-
-static void alchemy_usb_resume(void)
-{
-	alchemy_usb_pm(0);
-}
-
-static struct syscore_ops alchemy_usb_pm_ops = {
-	.suspend	= alchemy_usb_suspend,
-	.resume		= alchemy_usb_resume,
-};
-
-static int __init alchemy_usb_init(void)
-{
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1000:
-	case ALCHEMY_CPU_AU1500:
-	case ALCHEMY_CPU_AU1100:
-		au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
-		break;
-	case ALCHEMY_CPU_AU1550:
-		au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
-		break;
-	case ALCHEMY_CPU_AU1200:
-		au1200_usb_init();
-		break;
-	case ALCHEMY_CPU_AU1300:
-		au1300_usb_init();
-		break;
-	}
-
-	register_syscore_ops(&alchemy_usb_pm_ops);
-
-	return 0;
-}
-arch_initcall(alchemy_usb_init);