diff options
author | Andreas Westin <andreas.westin@stericsson.com> | 2012-04-30 08:11:17 (GMT) |
---|---|---|
committer | Herbert Xu <herbert@gondor.apana.org.au> | 2012-05-04 09:04:51 (GMT) |
commit | 2789c08fffeae270820dda5d096634aecc810af5 (patch) | |
tree | 113e76a6908b4b786374c53f010c472a3d663514 /drivers | |
parent | 028fdd87b79a45544a2b6902989f2cbbf73a3eac (diff) | |
download | linux-fsl-qoriq-2789c08fffeae270820dda5d096634aecc810af5.tar.xz |
crypto: ux500 - Add driver for CRYP hardware
This adds a driver for the ST-Ericsson ux500 crypto hardware
module. It supports AES, DES and 3DES, the driver implements
support for AES-ECB,CBC and CTR.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andreas Westin <andreas.westin@stericsson.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/crypto/Kconfig | 11 | ||||
-rw-r--r-- | drivers/crypto/Makefile | 1 | ||||
-rw-r--r-- | drivers/crypto/ux500/Kconfig | 21 | ||||
-rw-r--r-- | drivers/crypto/ux500/Makefile | 7 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/Makefile | 13 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp.c | 391 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp.h | 308 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp_core.c | 1785 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp_irq.c | 45 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp_irq.h | 31 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp_irqp.h | 125 | ||||
-rw-r--r-- | drivers/crypto/ux500/cryp/cryp_p.h | 124 |
12 files changed, 2862 insertions, 0 deletions
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index ab9abb4..69fdf18 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -295,4 +295,15 @@ config CRYPTO_DEV_TEGRA_AES To compile this driver as a module, choose M here: the module will be called tegra-aes. +config CRYPTO_DEV_UX500 + tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration" + depends on ARCH_U8500 + select CRYPTO_ALGAPI + help + Driver for ST-Ericsson UX500 crypto engine. + +if CRYPTO_DEV_UX500 + source "drivers/crypto/ux500/Kconfig" +endif # if CRYPTO_DEV_UX500 + endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index f3e64ea..0139032 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes.o obj-$(CONFIG_CRYPTO_DEV_PICOXCELL) += picoxcell_crypto.o obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o obj-$(CONFIG_CRYPTO_DEV_TEGRA_AES) += tegra-aes.o +obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
\ No newline at end of file diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig new file mode 100644 index 0000000..b893fa0 --- /dev/null +++ b/drivers/crypto/ux500/Kconfig @@ -0,0 +1,21 @@ +# +# Copyright (C) ST-Ericsson SA 2010 +# Author: Shujuan Chen (shujuan.chen@stericsson.com) +# License terms: GNU General Public License (GPL) version 2 +# + +config CRYPTO_DEV_UX500_CRYP + tristate "UX500 crypto driver for CRYP block" + depends on CRYPTO_DEV_UX500 + select CRYPTO_DES + help + This selects the crypto driver for the UX500_CRYP hardware. It supports + AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes. + +config CRYPTO_DEV_UX500_DEBUG + bool "Activate ux500 platform debug-mode for crypto and hash block" + depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH + default n + help + Say Y if you want to add debug prints to ux500_hash and + ux500_cryp devices. diff --git a/drivers/crypto/ux500/Makefile b/drivers/crypto/ux500/Makefile new file mode 100644 index 0000000..beb4d37 --- /dev/null +++ b/drivers/crypto/ux500/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) ST-Ericsson SA 2010 +# Author: Shujuan Chen (shujuan.chen@stericsson.com) +# License terms: GNU General Public License (GPL) version 2 +# + +obj-$(CONFIG_CRYPTO_DEV_UX500_CRYP) += cryp/ diff --git a/drivers/crypto/ux500/cryp/Makefile b/drivers/crypto/ux500/cryp/Makefile new file mode 100644 index 0000000..e5d362a --- /dev/null +++ b/drivers/crypto/ux500/cryp/Makefile @@ -0,0 +1,13 @@ +#/* +# * Copyright (C) ST-Ericsson SA 2010 +# * Author: shujuan.chen@stericsson.com for ST-Ericsson. +# * License terms: GNU General Public License (GPL) version 2 */ + +ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG +CFLAGS_cryp_core.o := -DDEBUG -O0 +CFLAGS_cryp.o := -DDEBUG -O0 +CFLAGS_cryp_irq.o := -DDEBUG -O0 +endif + +obj-$(CONFIG_CRYPTO_DEV_UX500_CRYP) += ux500_cryp.o +ux500_cryp-objs := cryp.o cryp_irq.o cryp_core.o diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c new file mode 100644 index 0000000..bd206ff --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp.c @@ -0,0 +1,391 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/types.h> + +#include <mach/hardware.h> + +#include "cryp_p.h" +#include "cryp.h" + +/** + * cryp_wait_until_done - wait until the device logic is not busy + */ +void cryp_wait_until_done(struct cryp_device_data *device_data) +{ + while (cryp_is_logic_busy(device_data)) + cpu_relax(); +} + +/** + * cryp_check - This routine checks Peripheral and PCell Id + * @device_data: Pointer to the device data struct for base address. + */ +int cryp_check(struct cryp_device_data *device_data) +{ + int peripheralid2 = 0; + + if (NULL == device_data) + return -EINVAL; + + if (cpu_is_u8500()) + peripheralid2 = CRYP_PERIPHERAL_ID2_DB8500; + else if (cpu_is_u5500()) + peripheralid2 = CRYP_PERIPHERAL_ID2_DB5500; + + /* Check Peripheral and Pcell Id Register for CRYP */ + if ((CRYP_PERIPHERAL_ID0 == + readl_relaxed(&device_data->base->periphId0)) + && (CRYP_PERIPHERAL_ID1 == + readl_relaxed(&device_data->base->periphId1)) + && (peripheralid2 == + readl_relaxed(&device_data->base->periphId2)) + && (CRYP_PERIPHERAL_ID3 == + readl_relaxed(&device_data->base->periphId3)) + && (CRYP_PCELL_ID0 == + readl_relaxed(&device_data->base->pcellId0)) + && (CRYP_PCELL_ID1 == + readl_relaxed(&device_data->base->pcellId1)) + && (CRYP_PCELL_ID2 == + readl_relaxed(&device_data->base->pcellId2)) + && (CRYP_PCELL_ID3 == + readl_relaxed(&device_data->base->pcellId3))) { + return 0; + } + + return -EPERM; +} + +/** + * cryp_activity - This routine enables/disable the cryptography function. + * @device_data: Pointer to the device data struct for base address. + * @cryp_crypen: Enable/Disable functionality + */ +void cryp_activity(struct cryp_device_data *device_data, + enum cryp_crypen cryp_crypen) +{ + CRYP_PUT_BITS(&device_data->base->cr, + cryp_crypen, + CRYP_CR_CRYPEN_POS, + CRYP_CR_CRYPEN_MASK); +} + +/** + * cryp_flush_inoutfifo - Resets both the input and the output FIFOs + * @device_data: Pointer to the device data struct for base address. + */ +void cryp_flush_inoutfifo(struct cryp_device_data *device_data) +{ + /* + * We always need to disble the hardware before trying to flush the + * FIFO. This is something that isn't written in the design + * specification, but we have been informed by the hardware designers + * that this must be done. + */ + cryp_activity(device_data, CRYP_CRYPEN_DISABLE); + cryp_wait_until_done(device_data); + + CRYP_SET_BITS(&device_data->base->cr, CRYP_CR_FFLUSH_MASK); + /* + * CRYP_SR_INFIFO_READY_MASK is the expected value on the status + * register when starting a new calculation, which means Input FIFO is + * not full and input FIFO is empty. + */ + while (readl_relaxed(&device_data->base->sr) != + CRYP_SR_INFIFO_READY_MASK) + cpu_relax(); +} + +/** + * cryp_set_configuration - This routine set the cr CRYP IP + * @device_data: Pointer to the device data struct for base address. + * @cryp_config: Pointer to the configuration parameter + * @control_register: The control register to be written later on. + */ +int cryp_set_configuration(struct cryp_device_data *device_data, + struct cryp_config *cryp_config, + u32 *control_register) +{ + u32 cr_for_kse; + + if (NULL == device_data || NULL == cryp_config) + return -EINVAL; + + *control_register |= (cryp_config->keysize << CRYP_CR_KEYSIZE_POS); + + /* Prepare key for decryption in AES_ECB and AES_CBC mode. */ + if ((CRYP_ALGORITHM_DECRYPT == cryp_config->algodir) && + ((CRYP_ALGO_AES_ECB == cryp_config->algomode) || + (CRYP_ALGO_AES_CBC == cryp_config->algomode))) { + cr_for_kse = *control_register; + /* + * This seems a bit odd, but it is indeed needed to set this to + * encrypt even though it is a decryption that we are doing. It + * also mentioned in the design spec that you need to do this. + * After the keyprepartion for decrypting is done you should set + * algodir back to decryption, which is done outside this if + * statement. + * + * According to design specification we should set mode ECB + * during key preparation even though we might be running CBC + * when enter this function. + * + * Writing to KSE_ENABLED will drop CRYPEN when key preparation + * is done. Therefore we need to set CRYPEN again outside this + * if statement when running decryption. + */ + cr_for_kse |= ((CRYP_ALGORITHM_ENCRYPT << CRYP_CR_ALGODIR_POS) | + (CRYP_ALGO_AES_ECB << CRYP_CR_ALGOMODE_POS) | + (CRYP_CRYPEN_ENABLE << CRYP_CR_CRYPEN_POS) | + (KSE_ENABLED << CRYP_CR_KSE_POS)); + + writel_relaxed(cr_for_kse, &device_data->base->cr); + cryp_wait_until_done(device_data); + } + + *control_register |= + ((cryp_config->algomode << CRYP_CR_ALGOMODE_POS) | + (cryp_config->algodir << CRYP_CR_ALGODIR_POS)); + + return 0; +} + +/** + * cryp_configure_protection - set the protection bits in the CRYP logic. + * @device_data: Pointer to the device data struct for base address. + * @p_protect_config: Pointer to the protection mode and + * secure mode configuration + */ +int cryp_configure_protection(struct cryp_device_data *device_data, + struct cryp_protection_config *p_protect_config) +{ + if (NULL == p_protect_config) + return -EINVAL; + + CRYP_WRITE_BIT(&device_data->base->cr, + (u32) p_protect_config->secure_access, + CRYP_CR_SECURE_MASK); + CRYP_PUT_BITS(&device_data->base->cr, + p_protect_config->privilege_access, + CRYP_CR_PRLG_POS, + CRYP_CR_PRLG_MASK); + + return 0; +} + +/** + * cryp_is_logic_busy - returns the busy status of the CRYP logic + * @device_data: Pointer to the device data struct for base address. + */ +int cryp_is_logic_busy(struct cryp_device_data *device_data) +{ + return CRYP_TEST_BITS(&device_data->base->sr, + CRYP_SR_BUSY_MASK); +} + +/** + * cryp_configure_for_dma - configures the CRYP IP for DMA operation + * @device_data: Pointer to the device data struct for base address. + * @dma_req: Specifies the DMA request type value. + */ +void cryp_configure_for_dma(struct cryp_device_data *device_data, + enum cryp_dma_req_type dma_req) +{ + CRYP_SET_BITS(&device_data->base->dmacr, + (u32) dma_req); +} + +/** + * cryp_configure_key_values - configures the key values for CRYP operations + * @device_data: Pointer to the device data struct for base address. + * @key_reg_index: Key value index register + * @key_value: The key value struct + */ +int cryp_configure_key_values(struct cryp_device_data *device_data, + enum cryp_key_reg_index key_reg_index, + struct cryp_key_value key_value) +{ + while (cryp_is_logic_busy(device_data)) + cpu_relax(); + + switch (key_reg_index) { + case CRYP_KEY_REG_1: + writel_relaxed(key_value.key_value_left, + &device_data->base->key_1_l); + writel_relaxed(key_value.key_value_right, + &device_data->base->key_1_r); + break; + case CRYP_KEY_REG_2: + writel_relaxed(key_value.key_value_left, + &device_data->base->key_2_l); + writel_relaxed(key_value.key_value_right, + &device_data->base->key_2_r); + break; + case CRYP_KEY_REG_3: + writel_relaxed(key_value.key_value_left, + &device_data->base->key_3_l); + writel_relaxed(key_value.key_value_right, + &device_data->base->key_3_r); + break; + case CRYP_KEY_REG_4: + writel_relaxed(key_value.key_value_left, + &device_data->base->key_4_l); + writel_relaxed(key_value.key_value_right, + &device_data->base->key_4_r); + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * cryp_configure_init_vector - configures the initialization vector register + * @device_data: Pointer to the device data struct for base address. + * @init_vector_index: Specifies the index of the init vector. + * @init_vector_value: Specifies the value for the init vector. + */ +int cryp_configure_init_vector(struct cryp_device_data *device_data, + enum cryp_init_vector_index + init_vector_index, + struct cryp_init_vector_value + init_vector_value) +{ + while (cryp_is_logic_busy(device_data)) + cpu_relax(); + + switch (init_vector_index) { + case CRYP_INIT_VECTOR_INDEX_0: + writel_relaxed(init_vector_value.init_value_left, + &device_data->base->init_vect_0_l); + writel_relaxed(init_vector_value.init_value_right, + &device_data->base->init_vect_0_r); + break; + case CRYP_INIT_VECTOR_INDEX_1: + writel_relaxed(init_vector_value.init_value_left, + &device_data->base->init_vect_1_l); + writel_relaxed(init_vector_value.init_value_right, + &device_data->base->init_vect_1_r); + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * cryp_save_device_context - Store hardware registers and + * other device context parameter + * @device_data: Pointer to the device data struct for base address. + * @ctx: Crypto device context + */ +void cryp_save_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx, + int cryp_mode) +{ + enum cryp_algo_mode algomode; + struct cryp_register *src_reg = device_data->base; + struct cryp_config *config = + (struct cryp_config *)device_data->current_ctx; + + /* + * Always start by disable the hardware and wait for it to finish the + * ongoing calculations before trying to reprogram it. + */ + cryp_activity(device_data, CRYP_CRYPEN_DISABLE); + cryp_wait_until_done(device_data); + + if (cryp_mode == CRYP_MODE_DMA) + cryp_configure_for_dma(device_data, CRYP_DMA_DISABLE_BOTH); + + if (CRYP_TEST_BITS(&src_reg->sr, CRYP_SR_IFEM_MASK) == 0) + ctx->din = readl_relaxed(&src_reg->din); + + ctx->cr = readl_relaxed(&src_reg->cr) & CRYP_CR_CONTEXT_SAVE_MASK; + + switch (config->keysize) { + case CRYP_KEY_SIZE_256: + ctx->key_4_l = readl_relaxed(&src_reg->key_4_l); + ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); + + case CRYP_KEY_SIZE_192: + ctx->key_3_l = readl_relaxed(&src_reg->key_3_l); + ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); + + case CRYP_KEY_SIZE_128: + ctx->key_2_l = readl_relaxed(&src_reg->key_2_l); + ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); + + default: + ctx->key_1_l = readl_relaxed(&src_reg->key_1_l); + ctx->key_1_r = readl_relaxed(&src_reg->key_1_r); + } + + /* Save IV for CBC mode for both AES and DES. */ + algomode = ((ctx->cr & CRYP_CR_ALGOMODE_MASK) >> CRYP_CR_ALGOMODE_POS); + if (algomode == CRYP_ALGO_TDES_CBC || + algomode == CRYP_ALGO_DES_CBC || + algomode == CRYP_ALGO_AES_CBC) { + ctx->init_vect_0_l = readl_relaxed(&src_reg->init_vect_0_l); + ctx->init_vect_0_r = readl_relaxed(&src_reg->init_vect_0_r); + ctx->init_vect_1_l = readl_relaxed(&src_reg->init_vect_1_l); + ctx->init_vect_1_r = readl_relaxed(&src_reg->init_vect_1_r); + } +} + +/** + * cryp_restore_device_context - Restore hardware registers and + * other device context parameter + * @device_data: Pointer to the device data struct for base address. + * @ctx: Crypto device context + */ +void cryp_restore_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx) +{ + struct cryp_register *reg = device_data->base; + struct cryp_config *config = + (struct cryp_config *)device_data->current_ctx; + + /* + * Fall through for all items in switch statement. DES is captured in + * the default. + */ + switch (config->keysize) { + case CRYP_KEY_SIZE_256: + writel_relaxed(ctx->key_4_l, ®->key_4_l); + writel_relaxed(ctx->key_4_r, ®->key_4_r); + + case CRYP_KEY_SIZE_192: + writel_relaxed(ctx->key_3_l, ®->key_3_l); + writel_relaxed(ctx->key_3_r, ®->key_3_r); + + case CRYP_KEY_SIZE_128: + writel_relaxed(ctx->key_2_l, ®->key_2_l); + writel_relaxed(ctx->key_2_r, ®->key_2_r); + + default: + writel_relaxed(ctx->key_1_l, ®->key_1_l); + writel_relaxed(ctx->key_1_r, ®->key_1_r); + } + + /* Restore IV for CBC mode for AES and DES. */ + if (config->algomode == CRYP_ALGO_TDES_CBC || + config->algomode == CRYP_ALGO_DES_CBC || + config->algomode == CRYP_ALGO_AES_CBC) { + writel_relaxed(ctx->init_vect_0_l, ®->init_vect_0_l); + writel_relaxed(ctx->init_vect_0_r, ®->init_vect_0_r); + writel_relaxed(ctx->init_vect_1_l, ®->init_vect_1_l); + writel_relaxed(ctx->init_vect_1_r, ®->init_vect_1_r); + } +} diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h new file mode 100644 index 0000000..14cfd05 --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp.h @@ -0,0 +1,308 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef _CRYP_H_ +#define _CRYP_H_ + +#include <linux/completion.h> +#include <linux/dmaengine.h> +#include <linux/klist.h> +#include <linux/mutex.h> + +#define DEV_DBG_NAME "crypX crypX:" + +/* CRYP enable/disable */ +enum cryp_crypen { + CRYP_CRYPEN_DISABLE = 0, + CRYP_CRYPEN_ENABLE = 1 +}; + +/* CRYP Start Computation enable/disable */ +enum cryp_start { + CRYP_START_DISABLE = 0, + CRYP_START_ENABLE = 1 +}; + +/* CRYP Init Signal enable/disable */ +enum cryp_init { + CRYP_INIT_DISABLE = 0, + CRYP_INIT_ENABLE = 1 +}; + +/* Cryp State enable/disable */ +enum cryp_state { + CRYP_STATE_DISABLE = 0, + CRYP_STATE_ENABLE = 1 +}; + +/* Key preparation bit enable */ +enum cryp_key_prep { + KSE_DISABLED = 0, + KSE_ENABLED = 1 +}; + +/* Key size for AES */ +#define CRYP_KEY_SIZE_128 (0) +#define CRYP_KEY_SIZE_192 (1) +#define CRYP_KEY_SIZE_256 (2) + +/* AES modes */ +enum cryp_algo_mode { + CRYP_ALGO_TDES_ECB, + CRYP_ALGO_TDES_CBC, + CRYP_ALGO_DES_ECB, + CRYP_ALGO_DES_CBC, + CRYP_ALGO_AES_ECB, + CRYP_ALGO_AES_CBC, + CRYP_ALGO_AES_CTR, + CRYP_ALGO_AES_XTS +}; + +/* Cryp Encryption or Decryption */ +enum cryp_algorithm_dir { + CRYP_ALGORITHM_ENCRYPT, + CRYP_ALGORITHM_DECRYPT +}; + +/* Hardware access method */ +enum cryp_mode { + CRYP_MODE_POLLING, + CRYP_MODE_INTERRUPT, + CRYP_MODE_DMA +}; + +/** + * struct cryp_config - + * @keysize: Key size for AES + * @algomode: AES modes + * @algodir: Cryp Encryption or Decryption + * + * CRYP configuration structure to be passed to set configuration + */ +struct cryp_config { + int keysize; + enum cryp_algo_mode algomode; + enum cryp_algorithm_dir algodir; +}; + +/** + * struct cryp_protection_config - + * @privilege_access: Privileged cryp state enable/disable + * @secure_access: Secure cryp state enable/disable + * + * Protection configuration structure for setting privilage access + */ +struct cryp_protection_config { + enum cryp_state privilege_access; + enum cryp_state secure_access; +}; + +/* Cryp status */ +enum cryp_status_id { + CRYP_STATUS_BUSY = 0x10, + CRYP_STATUS_OUTPUT_FIFO_FULL = 0x08, + CRYP_STATUS_OUTPUT_FIFO_NOT_EMPTY = 0x04, + CRYP_STATUS_INPUT_FIFO_NOT_FULL = 0x02, + CRYP_STATUS_INPUT_FIFO_EMPTY = 0x01 +}; + +/* Cryp DMA interface */ +enum cryp_dma_req_type { + CRYP_DMA_DISABLE_BOTH, + CRYP_DMA_ENABLE_IN_DATA, + CRYP_DMA_ENABLE_OUT_DATA, + CRYP_DMA_ENABLE_BOTH_DIRECTIONS +}; + +enum cryp_dma_channel { + CRYP_DMA_RX = 0, + CRYP_DMA_TX +}; + +/* Key registers */ +enum cryp_key_reg_index { + CRYP_KEY_REG_1, + CRYP_KEY_REG_2, + CRYP_KEY_REG_3, + CRYP_KEY_REG_4 +}; + +/* Key register left and right */ +struct cryp_key_value { + u32 key_value_left; + u32 key_value_right; +}; + +/* Cryp Initialization structure */ +enum cryp_init_vector_index { + CRYP_INIT_VECTOR_INDEX_0, + CRYP_INIT_VECTOR_INDEX_1 +}; + +/* struct cryp_init_vector_value - + * @init_value_left + * @init_value_right + * */ +struct cryp_init_vector_value { + u32 init_value_left; + u32 init_value_right; +}; + +/** + * struct cryp_device_context - structure for a cryp context. + * @cr: control register + * @dmacr: DMA control register + * @imsc: Interrupt mask set/clear register + * @key_1_l: Key 1l register + * @key_1_r: Key 1r register + * @key_2_l: Key 2l register + * @key_2_r: Key 2r register + * @key_3_l: Key 3l register + * @key_3_r: Key 3r register + * @key_4_l: Key 4l register + * @key_4_r: Key 4r register + * @init_vect_0_l: Initialization vector 0l register + * @init_vect_0_r: Initialization vector 0r register + * @init_vect_1_l: Initialization vector 1l register + * @init_vect_1_r: Initialization vector 0r register + * @din: Data in register + * @dout: Data out register + * + * CRYP power management specifc structure. + */ +struct cryp_device_context { + u32 cr; + u32 dmacr; + u32 imsc; + + u32 key_1_l; + u32 key_1_r; + u32 key_2_l; + u32 key_2_r; + u32 key_3_l; + u32 key_3_r; + u32 key_4_l; + u32 key_4_r; + + u32 init_vect_0_l; + u32 init_vect_0_r; + u32 init_vect_1_l; + u32 init_vect_1_r; + + u32 din; + u32 dout; +}; + +struct cryp_dma { + dma_cap_mask_t mask; + struct completion cryp_dma_complete; + struct dma_chan *chan_cryp2mem; + struct dma_chan *chan_mem2cryp; + struct stedma40_chan_cfg *cfg_cryp2mem; + struct stedma40_chan_cfg *cfg_mem2cryp; + int sg_src_len; + int sg_dst_len; + struct scatterlist *sg_src; + struct scatterlist *sg_dst; + int nents_src; + int nents_dst; +}; + +/** + * struct cryp_device_data - structure for a cryp device. + * @base: Pointer to the hardware base address. + * @dev: Pointer to the devices dev structure. + * @clk: Pointer to the device's clock control. + * @pwr_regulator: Pointer to the device's power control. + * @power_status: Current status of the power. + * @ctx_lock: Lock for current_ctx. + * @current_ctx: Pointer to the currently allocated context. + * @list_node: For inclusion into a klist. + * @dma: The dma structure holding channel configuration. + * @power_state: TRUE = power state on, FALSE = power state off. + * @power_state_spinlock: Spinlock for power_state. + * @restore_dev_ctx: TRUE = saved ctx, FALSE = no saved ctx. + */ +struct cryp_device_data { + struct cryp_register __iomem *base; + struct device *dev; + struct clk *clk; + struct regulator *pwr_regulator; + int power_status; + struct spinlock ctx_lock; + struct cryp_ctx *current_ctx; + struct klist_node list_node; + struct cryp_dma dma; + bool power_state; + struct spinlock power_state_spinlock; + bool restore_dev_ctx; +}; + +void cryp_wait_until_done(struct cryp_device_data *device_data); + +/* Initialization functions */ + +int cryp_check(struct cryp_device_data *device_data); + +void cryp_activity(struct cryp_device_data *device_data, + enum cryp_crypen cryp_crypen); + +void cryp_flush_inoutfifo(struct cryp_device_data *device_data); + +int cryp_set_configuration(struct cryp_device_data *device_data, + struct cryp_config *cryp_config, + u32 *control_register); + +void cryp_configure_for_dma(struct cryp_device_data *device_data, + enum cryp_dma_req_type dma_req); + +int cryp_configure_key_values(struct cryp_device_data *device_data, + enum cryp_key_reg_index key_reg_index, + struct cryp_key_value key_value); + +int cryp_configure_init_vector(struct cryp_device_data *device_data, + enum cryp_init_vector_index + init_vector_index, + struct cryp_init_vector_value + init_vector_value); + +int cryp_configure_protection(struct cryp_device_data *device_data, + struct cryp_protection_config *p_protect_config); + +/* Power management funtions */ +void cryp_save_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx, + int cryp_mode); + +void cryp_restore_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx); + +/* Data transfer and status bits. */ +int cryp_is_logic_busy(struct cryp_device_data *device_data); + +int cryp_get_status(struct cryp_device_data *device_data); + +/** + * cryp_write_indata - This routine writes 32 bit data into the data input + * register of the cryptography IP. + * @device_data: Pointer to the device data struct for base address. + * @write_data: Data to write. + */ +int cryp_write_indata(struct cryp_device_data *device_data, u32 write_data); + +/** + * cryp_read_outdata - This routine reads the data from the data output + * register of the CRYP logic + * @device_data: Pointer to the device data struct for base address. + * @read_data: Read the data from the output FIFO. + */ +int cryp_read_outdata(struct cryp_device_data *device_data, u32 *read_data); + +#endif /* _CRYP_H_ */ diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c new file mode 100644 index 0000000..7051e00 --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -0,0 +1,1785 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/crypto.h> +#include <linux/dmaengine.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irqreturn.h> +#include <linux/klist.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/semaphore.h> + +#include <crypto/aes.h> +#include <crypto/algapi.h> +#include <crypto/ctr.h> +#include <crypto/des.h> +#include <crypto/scatterwalk.h> + +#include <plat/ste_dma40.h> + +#include <mach/crypto-ux500.h> +#include <mach/hardware.h> + +#include "cryp_p.h" +#include "cryp.h" + +#define CRYP_MAX_KEY_SIZE 32 +#define BYTES_PER_WORD 4 + +static int cryp_mode; +static atomic_t session_id; + +static struct stedma40_chan_cfg *mem_to_engine; +static struct stedma40_chan_cfg *engine_to_mem; + +/** + * struct cryp_driver_data - data specific to the driver. + * + * @device_list: A list of registered devices to choose from. + * @device_allocation: A semaphore initialized with number of devices. + */ +struct cryp_driver_data { + struct klist device_list; + struct semaphore device_allocation; +}; + +/** + * struct cryp_ctx - Crypto context + * @config: Crypto mode. + * @key[CRYP_MAX_KEY_SIZE]: Key. + * @keylen: Length of key. + * @iv: Pointer to initialization vector. + * @indata: Pointer to indata. + * @outdata: Pointer to outdata. + * @datalen: Length of indata. + * @outlen: Length of outdata. + * @blocksize: Size of blocks. + * @updated: Updated flag. + * @dev_ctx: Device dependent context. + * @device: Pointer to the device. + */ +struct cryp_ctx { + struct cryp_config config; + u8 key[CRYP_MAX_KEY_SIZE]; + u32 keylen; + u8 *iv; + const u8 *indata; + u8 *outdata; + u32 datalen; + u32 outlen; + u32 blocksize; + u8 updated; + struct cryp_device_context dev_ctx; + struct cryp_device_data *device; + u32 session_id; +}; + +static struct cryp_driver_data driver_data; + +/** + * uint8p_to_uint32_be - 4*uint8 to uint32 big endian + * @in: Data to convert. + */ +static inline u32 uint8p_to_uint32_be(u8 *in) +{ + u32 *data = (u32 *)in; + + return cpu_to_be32p(data); +} + +/** + * swap_bits_in_byte - mirror the bits in a byte + * @b: the byte to be mirrored + * + * The bits are swapped the following way: + * Byte b include bits 0-7, nibble 1 (n1) include bits 0-3 and + * nibble 2 (n2) bits 4-7. + * + * Nibble 1 (n1): + * (The "old" (moved) bit is replaced with a zero) + * 1. Move bit 6 and 7, 4 positions to the left. + * 2. Move bit 3 and 5, 2 positions to the left. + * 3. Move bit 1-4, 1 position to the left. + * + * Nibble 2 (n2): + * 1. Move bit 0 and 1, 4 positions to the right. + * 2. Move bit 2 and 4, 2 positions to the right. + * 3. Move bit 3-6, 1 position to the right. + * + * Combine the two nibbles to a complete and swapped byte. + */ + +static inline u8 swap_bits_in_byte(u8 b) +{ +#define R_SHIFT_4_MASK 0xc0 /* Bits 6 and 7, right shift 4 */ +#define R_SHIFT_2_MASK 0x28 /* (After right shift 4) Bits 3 and 5, + right shift 2 */ +#define R_SHIFT_1_MASK 0x1e /* (After right shift 2) Bits 1-4, + right shift 1 */ +#define L_SHIFT_4_MASK 0x03 /* Bits 0 and 1, left shift 4 */ +#define L_SHIFT_2_MASK 0x14 /* (After left shift 4) Bits 2 and 4, + left shift 2 */ +#define L_SHIFT_1_MASK 0x78 /* (After left shift 1) Bits 3-6, + left shift 1 */ + + u8 n1; + u8 n2; + + /* Swap most significant nibble */ + /* Right shift 4, bits 6 and 7 */ + n1 = ((b & R_SHIFT_4_MASK) >> 4) | (b & ~(R_SHIFT_4_MASK >> 4)); + /* Right shift 2, bits 3 and 5 */ + n1 = ((n1 & R_SHIFT_2_MASK) >> 2) | (n1 & ~(R_SHIFT_2_MASK >> 2)); + /* Right shift 1, bits 1-4 */ + n1 = (n1 & R_SHIFT_1_MASK) >> 1; + + /* Swap least significant nibble */ + /* Left shift 4, bits 0 and 1 */ + n2 = ((b & L_SHIFT_4_MASK) << 4) | (b & ~(L_SHIFT_4_MASK << 4)); + /* Left shift 2, bits 2 and 4 */ + n2 = ((n2 & L_SHIFT_2_MASK) << 2) | (n2 & ~(L_SHIFT_2_MASK << 2)); + /* Left shift 1, bits 3-6 */ + n2 = (n2 & L_SHIFT_1_MASK) << 1; + + return n1 | n2; +} + +static inline void swap_words_in_key_and_bits_in_byte(const u8 *in, + u8 *out, u32 len) +{ + unsigned int i = 0; + int j; + int index = 0; + + j = len - BYTES_PER_WORD; + while (j >= 0) { + for (i = 0; i < BYTES_PER_WORD; i++) { + index = len - j - BYTES_PER_WORD + i; + out[j + i] = + swap_bits_in_byte(in[index]); + } + j -= BYTES_PER_WORD; + } +} + +static void add_session_id(struct cryp_ctx *ctx) +{ + /* + * We never want 0 to be a valid value, since this is the default value + * for the software context. + */ + if (unlikely(atomic_inc_and_test(&session_id))) + atomic_inc(&session_id); + + ctx->session_id = atomic_read(&session_id); +} + +static irqreturn_t cryp_interrupt_handler(int irq, void *param) +{ + struct cryp_ctx *ctx; + int i; + struct cryp_device_data *device_data; + + if (param == NULL) { + BUG_ON(!param); + return IRQ_HANDLED; + } + + /* The device is coming from the one found in hw_crypt_noxts. */ + device_data = (struct cryp_device_data *)param; + + ctx = device_data->current_ctx; + + if (ctx == NULL) { + BUG_ON(!ctx); + return IRQ_HANDLED; + } + + dev_dbg(ctx->device->dev, "[%s] (len: %d) %s, ", __func__, ctx->outlen, + cryp_pending_irq_src(device_data, CRYP_IRQ_SRC_OUTPUT_FIFO) ? + "out" : "in"); + + if (cryp_pending_irq_src(device_data, + CRYP_IRQ_SRC_OUTPUT_FIFO)) { + if (ctx->outlen / ctx->blocksize > 0) { + for (i = 0; i < ctx->blocksize / 4; i++) { + *(ctx->outdata) = readl_relaxed( + &device_data->base->dout); + ctx->outdata += 4; + ctx->outlen -= 4; + } + + if (ctx->outlen == 0) { + cryp_disable_irq_src(device_data, + CRYP_IRQ_SRC_OUTPUT_FIFO); + } + } + } else if (cryp_pending_irq_src(device_data, + CRYP_IRQ_SRC_INPUT_FIFO)) { + if (ctx->datalen / ctx->blocksize > 0) { + for (i = 0 ; i < ctx->blocksize / 4; i++) { + writel_relaxed(ctx->indata, + &device_data->base->din); + ctx->indata += 4; + ctx->datalen -= 4; + } + + if (ctx->datalen == 0) + cryp_disable_irq_src(device_data, + CRYP_IRQ_SRC_INPUT_FIFO); + + if (ctx->config.algomode == CRYP_ALGO_AES_XTS) { + CRYP_PUT_BITS(&device_data->base->cr, + CRYP_START_ENABLE, + CRYP_CR_START_POS, + CRYP_CR_START_MASK); + + cryp_wait_until_done(device_data); + } + } + } + + return IRQ_HANDLED; +} + +static int mode_is_aes(enum cryp_algo_mode mode) +{ + return CRYP_ALGO_AES_ECB == mode || + CRYP_ALGO_AES_CBC == mode || + CRYP_ALGO_AES_CTR == mode || + CRYP_ALGO_AES_XTS == mode; +} + +static int cfg_iv(struct cryp_device_data *device_data, u32 left, u32 right, + enum cryp_init_vector_index index) +{ + struct cryp_init_vector_value vector_value; + + dev_dbg(device_data->dev, "[%s]", __func__); + + vector_value.init_value_left = left; + vector_value.init_value_right = right; + + return cryp_configure_init_vector(device_data, + index, + vector_value); +} + +static int cfg_ivs(struct cryp_device_data *device_data, struct cryp_ctx *ctx) +{ + int i; + int status = 0; + int num_of_regs = ctx->blocksize / 8; + u32 iv[AES_BLOCK_SIZE / 4]; + + dev_dbg(device_data->dev, "[%s]", __func__); + + /* + * Since we loop on num_of_regs we need to have a check in case + * someone provides an incorrect blocksize which would force calling + * cfg_iv with i greater than 2 which is an error. + */ + if (num_of_regs > 2) { + dev_err(device_data->dev, "[%s] Incorrect blocksize %d", + __func__, ctx->blocksize); + return -EINVAL; + } + + for (i = 0; i < ctx->blocksize / 4; i++) + iv[i] = uint8p_to_uint32_be(ctx->iv + i*4); + + for (i = 0; i < num_of_regs; i++) { + status = cfg_iv(device_data, iv[i*2], iv[i*2+1], + (enum cryp_init_vector_index) i); + if (status != 0) + return status; + } + return status; +} + +static int set_key(struct cryp_device_data *device_data, + u32 left_key, + u32 right_key, + enum cryp_key_reg_index index) +{ + struct cryp_key_value key_value; + int cryp_error; + + dev_dbg(device_data->dev, "[%s]", __func__); + + key_value.key_value_left = left_key; + key_value.key_value_right = right_key; + + cryp_error = cryp_configure_key_values(device_data, + index, + key_value); + if (cryp_error != 0) + dev_err(device_data->dev, "[%s]: " + "cryp_configure_key_values() failed!", __func__); + + return cryp_error; +} + +static int cfg_keys(struct cryp_ctx *ctx) +{ + int i; + int num_of_regs = ctx->keylen / 8; + u32 swapped_key[CRYP_MAX_KEY_SIZE / 4]; + int cryp_error = 0; + + dev_dbg(ctx->device->dev, "[%s]", __func__); + + if (mode_is_aes(ctx->config.algomode)) { + swap_words_in_key_and_bits_in_byte((u8 *)ctx->key, + (u8 *)swapped_key, + ctx->keylen); + } else { + for (i = 0; i < ctx->keylen / 4; i++) + swapped_key[i] = uint8p_to_uint32_be(ctx->key + i*4); + } + + for (i = 0; i < num_of_regs; i++) { + cryp_error = set_key(ctx->device, + *(((u32 *)swapped_key)+i*2), + *(((u32 *)swapped_key)+i*2+1), + (enum cryp_key_reg_index) i); + + if (cryp_error != 0) { + dev_err(ctx->device->dev, "[%s]: set_key() failed!", + __func__); + return cryp_error; + } + } + return cryp_error; +} + +static int cryp_setup_context(struct cryp_ctx *ctx, + struct cryp_device_data *device_data) +{ + u32 control_register = CRYP_CR_DEFAULT; + + switch (cryp_mode) { + case CRYP_MODE_INTERRUPT: + writel_relaxed(CRYP_IMSC_DEFAULT, &device_data->base->imsc); + break; + + case CRYP_MODE_DMA: + writel_relaxed(CRYP_DMACR_DEFAULT, &device_data->base->dmacr); + break; + + default: + break; + } + + if (ctx->updated == 0) { + cryp_flush_inoutfifo(device_data); + if (cfg_keys(ctx) != 0) { + dev_err(ctx->device->dev, "[%s]: cfg_keys failed!", + __func__); + return -EINVAL; + } + + if (ctx->iv && + CRYP_ALGO_AES_ECB != ctx->config.algomode && + CRYP_ALGO_DES_ECB != ctx->config.algomode && + CRYP_ALGO_TDES_ECB != ctx->config.algomode) { + if (cfg_ivs(device_data, ctx) != 0) + return -EPERM; + } + + cryp_set_configuration(device_data, &ctx->config, + &control_register); + add_session_id(ctx); + } else if (ctx->updated == 1 && + ctx->session_id != atomic_read(&session_id)) { + cryp_flush_inoutfifo(device_data); + cryp_restore_device_context(device_data, &ctx->dev_ctx); + + add_session_id(ctx); + control_register = ctx->dev_ctx.cr; + } else + control_register = ctx->dev_ctx.cr; + + writel(control_register | + (CRYP_CRYPEN_ENABLE << CRYP_CR_CRYPEN_POS), + &device_data->base->cr); + + return 0; +} + +static int cryp_get_device_data(struct cryp_ctx *ctx, + struct cryp_device_data **device_data) +{ + int ret; + struct klist_iter device_iterator; + struct klist_node *device_node; + struct cryp_device_data *local_device_data = NULL; + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + /* Wait until a device is available */ + ret = down_interruptible(&driver_data.device_allocation); + if (ret) + return ret; /* Interrupted */ + + /* Select a device */ + klist_iter_init(&driver_data.device_list, &device_iterator); + + device_node = klist_next(&device_iterator); + while (device_node) { + local_device_data = container_of(device_node, + struct cryp_device_data, list_node); + spin_lock(&local_device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (local_device_data->current_ctx) { + device_node = klist_next(&device_iterator); + } else { + local_device_data->current_ctx = ctx; + ctx->device = local_device_data; + spin_unlock(&local_device_data->ctx_lock); + break; + } + spin_unlock(&local_device_data->ctx_lock); + } + klist_iter_exit(&device_iterator); + + if (!device_node) { + /** + * No free device found. + * Since we allocated a device with down_interruptible, this + * should not be able to happen. + * Number of available devices, which are contained in + * device_allocation, is therefore decremented by not doing + * an up(device_allocation). + */ + return -EBUSY; + } + + *device_data = local_device_data; + + return 0; +} + +static void cryp_dma_setup_channel(struct cryp_device_data *device_data, + struct device *dev) +{ + dma_cap_zero(device_data->dma.mask); + dma_cap_set(DMA_SLAVE, device_data->dma.mask); + + device_data->dma.cfg_mem2cryp = mem_to_engine; + device_data->dma.chan_mem2cryp = + dma_request_channel(device_data->dma.mask, + stedma40_filter, + device_data->dma.cfg_mem2cryp); + + device_data->dma.cfg_cryp2mem = engine_to_mem; + device_data->dma.chan_cryp2mem = + dma_request_channel(device_data->dma.mask, + stedma40_filter, + device_data->dma.cfg_cryp2mem); + + init_completion(&device_data->dma.cryp_dma_complete); +} + +static void cryp_dma_out_callback(void *data) +{ + struct cryp_ctx *ctx = (struct cryp_ctx *) data; + dev_dbg(ctx->device->dev, "[%s]: ", __func__); + + complete(&ctx->device->dma.cryp_dma_complete); +} + +static int cryp_set_dma_transfer(struct cryp_ctx *ctx, + struct scatterlist *sg, + int len, + enum dma_data_direction direction) +{ + struct dma_async_tx_descriptor *desc; + struct dma_chan *channel = NULL; + dma_cookie_t cookie; + + dev_dbg(ctx->device->dev, "[%s]: ", __func__); + + if (unlikely(!IS_ALIGNED((u32)sg, 4))) { + dev_err(ctx->device->dev, "[%s]: Data in sg list isn't " + "aligned! Addr: 0x%08x", __func__, (u32)sg); + return -EFAULT; + } + + switch (direction) { + case DMA_TO_DEVICE: + channel = ctx->device->dma.chan_mem2cryp; + ctx->device->dma.sg_src = sg; + ctx->device->dma.sg_src_len = dma_map_sg(channel->device->dev, + ctx->device->dma.sg_src, + ctx->device->dma.nents_src, + direction); + + if (!ctx->device->dma.sg_src_len) { + dev_dbg(ctx->device->dev, + "[%s]: Could not map the sg list (TO_DEVICE)", + __func__); + return -EFAULT; + } + + dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer " + "(TO_DEVICE)", __func__); + + desc = channel->device->device_prep_slave_sg(channel, + ctx->device->dma.sg_src, + ctx->device->dma.sg_src_len, + direction, + DMA_CTRL_ACK); + break; + + case DMA_FROM_DEVICE: + channel = ctx->device->dma.chan_cryp2mem; + ctx->device->dma.sg_dst = sg; + ctx->device->dma.sg_dst_len = dma_map_sg(channel->device->dev, + ctx->device->dma.sg_dst, + ctx->device->dma.nents_dst, + direction); + + if (!ctx->device->dma.sg_dst_len) { + dev_dbg(ctx->device->dev, + "[%s]: Could not map the sg list (FROM_DEVICE)", + __func__); + return -EFAULT; + } + + dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer " + "(FROM_DEVICE)", __func__); + + desc = channel->device->device_prep_slave_sg(channel, + ctx->device->dma.sg_dst, + ctx->device->dma.sg_dst_len, + direction, + DMA_CTRL_ACK | + DMA_PREP_INTERRUPT); + + desc->callback = cryp_dma_out_callback; + desc->callback_param = ctx; + break; + + default: + dev_dbg(ctx->device->dev, "[%s]: Invalid DMA direction", + __func__); + return -EFAULT; + } + + cookie = desc->tx_submit(desc); + dma_async_issue_pending(channel); + + return 0; +} + +static void cryp_dma_done(struct cryp_ctx *ctx) +{ + struct dma_chan *chan; + + dev_dbg(ctx->device->dev, "[%s]: ", __func__); + + chan = ctx->device->dma.chan_mem2cryp; + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src, + ctx->device->dma.sg_src_len, DMA_TO_DEVICE); + + chan = ctx->device->dma.chan_cryp2mem; + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst, + ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE); +} + +static int cryp_dma_write(struct cryp_ctx *ctx, struct scatterlist *sg, + int len) +{ + int error = cryp_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE); + dev_dbg(ctx->device->dev, "[%s]: ", __func__); + + if (error) { + dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() " + "failed", __func__); + return error; + } + + return len; +} + +static int cryp_dma_read(struct cryp_ctx *ctx, struct scatterlist *sg, int len) +{ + int error = cryp_set_dma_transfer(ctx, sg, len, DMA_FROM_DEVICE); + if (error) { + dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() " + "failed", __func__); + return error; + } + + return len; +} + +static void cryp_polling_mode(struct cryp_ctx *ctx, + struct cryp_device_data *device_data) +{ + int len = ctx->blocksize / BYTES_PER_WORD; + int remaining_length = ctx->datalen; + u32 *indata = (u32 *)ctx->indata; + u32 *outdata = (u32 *)ctx->outdata; + + while (remaining_length > 0) { + writesl(&device_data->base->din, indata, len); + indata += len; + remaining_length -= (len * BYTES_PER_WORD); + cryp_wait_until_done(device_data); + + readsl(&device_data->base->dout, outdata, len); + outdata += len; + cryp_wait_until_done(device_data); + } +} + +static int cryp_disable_power(struct device *dev, + struct cryp_device_data *device_data, + bool save_device_context) +{ + int ret = 0; + + dev_dbg(dev, "[%s]", __func__); + + spin_lock(&device_data->power_state_spinlock); + if (!device_data->power_state) + goto out; + + spin_lock(&device_data->ctx_lock); + if (save_device_context && device_data->current_ctx) { + cryp_save_device_context(device_data, + &device_data->current_ctx->dev_ctx, + cryp_mode); + device_data->restore_dev_ctx = true; + } + spin_unlock(&device_data->ctx_lock); + + clk_disable(device_data->clk); + ret = regulator_disable(device_data->pwr_regulator); + if (ret) + dev_err(dev, "[%s]: " + "regulator_disable() failed!", + __func__); + + device_data->power_state = false; + +out: + spin_unlock(&device_data->power_state_spinlock); + + return ret; +} + +static int cryp_enable_power( + struct device *dev, + struct cryp_device_data *device_data, + bool restore_device_context) +{ + int ret = 0; + + dev_dbg(dev, "[%s]", __func__); + + spin_lock(&device_data->power_state_spinlock); + if (!device_data->power_state) { + ret = regulator_enable(device_data->pwr_regulator); + if (ret) { + dev_err(dev, "[%s]: regulator_enable() failed!", + __func__); + goto out; + } + + ret = clk_enable(device_data->clk); + if (ret) { + dev_err(dev, "[%s]: clk_enable() failed!", + __func__); + regulator_disable(device_data->pwr_regulator); + goto out; + } + device_data->power_state = true; + } + + if (device_data->restore_dev_ctx) { + spin_lock(&device_data->ctx_lock); + if (restore_device_context && device_data->current_ctx) { + device_data->restore_dev_ctx = false; + cryp_restore_device_context(device_data, + &device_data->current_ctx->dev_ctx); + } + spin_unlock(&device_data->ctx_lock); + } +out: + spin_unlock(&device_data->power_state_spinlock); + + return ret; +} + +static int hw_crypt_noxts(struct cryp_ctx *ctx, + struct cryp_device_data *device_data) +{ + int ret = 0; + + const u8 *indata = ctx->indata; + u8 *outdata = ctx->outdata; + u32 datalen = ctx->datalen; + u32 outlen = datalen; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + ctx->outlen = ctx->datalen; + + if (unlikely(!IS_ALIGNED((u32)indata, 4))) { + pr_debug(DEV_DBG_NAME " [%s]: Data isn't aligned! Addr: " + "0x%08x", __func__, (u32)indata); + return -EINVAL; + } + + ret = cryp_setup_context(ctx, device_data); + + if (ret) + goto out; + + if (cryp_mode == CRYP_MODE_INTERRUPT) { + cryp_enable_irq_src(device_data, CRYP_IRQ_SRC_INPUT_FIFO | + CRYP_IRQ_SRC_OUTPUT_FIFO); + + /* + * ctx->outlen is decremented in the cryp_interrupt_handler + * function. We had to add cpu_relax() (barrier) to make sure + * that gcc didn't optimze away this variable. + */ + while (ctx->outlen > 0) + cpu_relax(); + } else if (cryp_mode == CRYP_MODE_POLLING || + cryp_mode == CRYP_MODE_DMA) { + /* + * The reason for having DMA in this if case is that if we are + * running cryp_mode = 2, then we separate DMA routines for + * handling cipher/plaintext > blocksize, except when + * running the normal CRYPTO_ALG_TYPE_CIPHER, then we still use + * the polling mode. Overhead of doing DMA setup eats up the + * benefits using it. + */ + cryp_polling_mode(ctx, device_data); + } else { + dev_err(ctx->device->dev, "[%s]: Invalid operation mode!", + __func__); + ret = -EPERM; + goto out; + } + + cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode); + ctx->updated = 1; + +out: + ctx->indata = indata; + ctx->outdata = outdata; + ctx->datalen = datalen; + ctx->outlen = outlen; + + return ret; +} + +static int get_nents(struct scatterlist *sg, int nbytes) +{ + int nents = 0; + + while (nbytes > 0) { + nbytes -= sg->length; + sg = scatterwalk_sg_next(sg); + nents++; + } + + return nents; +} + +static int ablk_dma_crypt(struct ablkcipher_request *areq) +{ + struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + struct cryp_device_data *device_data; + + int bytes_written = 0; + int bytes_read = 0; + int ret; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + ctx->datalen = areq->nbytes; + ctx->outlen = areq->nbytes; + + ret = cryp_get_device_data(ctx, &device_data); + if (ret) + return ret; + + ret = cryp_setup_context(ctx, device_data); + if (ret) + goto out; + + /* We have the device now, so store the nents in the dma struct. */ + ctx->device->dma.nents_src = get_nents(areq->src, ctx->datalen); + ctx->device->dma.nents_dst = get_nents(areq->dst, ctx->outlen); + + /* Enable DMA in- and output. */ + cryp_configure_for_dma(device_data, CRYP_DMA_ENABLE_BOTH_DIRECTIONS); + + bytes_written = cryp_dma_write(ctx, areq->src, ctx->datalen); + bytes_read = cryp_dma_read(ctx, areq->dst, bytes_written); + + wait_for_completion(&ctx->device->dma.cryp_dma_complete); + cryp_dma_done(ctx); + + cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode); + ctx->updated = 1; + +out: + spin_lock(&device_data->ctx_lock); + device_data->current_ctx = NULL; + ctx->device = NULL; + spin_unlock(&device_data->ctx_lock); + + /* + * The down_interruptible part for this semaphore is called in + * cryp_get_device_data. + */ + up(&driver_data.device_allocation); + + if (unlikely(bytes_written != bytes_read)) + return -EPERM; + + return 0; +} + +static int ablk_crypt(struct ablkcipher_request *areq) +{ + struct ablkcipher_walk walk; + struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + struct cryp_device_data *device_data; + unsigned long src_paddr; + unsigned long dst_paddr; + int ret; + int nbytes; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + ret = cryp_get_device_data(ctx, &device_data); + if (ret) + goto out; + + ablkcipher_walk_init(&walk, areq->dst, areq->src, areq->nbytes); + ret = ablkcipher_walk_phys(areq, &walk); + + if (ret) { + pr_err(DEV_DBG_NAME "[%s]: ablkcipher_walk_phys() failed!", + __func__); + goto out; + } + + while ((nbytes = walk.nbytes) > 0) { + ctx->iv = walk.iv; + src_paddr = (page_to_phys(walk.src.page) + walk.src.offset); + ctx->indata = phys_to_virt(src_paddr); + + dst_paddr = (page_to_phys(walk.dst.page) + walk.dst.offset); + ctx->outdata = phys_to_virt(dst_paddr); + + ctx->datalen = nbytes - (nbytes % ctx->blocksize); + + ret = hw_crypt_noxts(ctx, device_data); + if (ret) + goto out; + + nbytes -= ctx->datalen; + ret = ablkcipher_walk_done(areq, &walk, nbytes); + if (ret) + goto out; + } + ablkcipher_walk_complete(&walk); + +out: + /* Release the device */ + spin_lock(&device_data->ctx_lock); + device_data->current_ctx = NULL; + ctx->device = NULL; + spin_unlock(&device_data->ctx_lock); + + /* + * The down_interruptible part for this semaphore is called in + * cryp_get_device_data. + */ + up(&driver_data.device_allocation); + + return ret; +} + +static int aes_ablkcipher_setkey(struct crypto_ablkcipher *cipher, + const u8 *key, unsigned int keylen) +{ + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + u32 *flags = &cipher->base.crt_flags; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + switch (keylen) { + case AES_KEYSIZE_128: + ctx->config.keysize = CRYP_KEY_SIZE_128; + break; + + case AES_KEYSIZE_192: + ctx->config.keysize = CRYP_KEY_SIZE_192; + break; + + case AES_KEYSIZE_256: + ctx->config.keysize = CRYP_KEY_SIZE_256; + break; + + default: + pr_err(DEV_DBG_NAME "[%s]: Unknown keylen!", __func__); + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + memcpy(ctx->key, key, keylen); + ctx->keylen = keylen; + + ctx->updated = 0; + + return 0; +} + +static int des_ablkcipher_setkey(struct crypto_ablkcipher *cipher, + const u8 *key, unsigned int keylen) +{ + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + u32 *flags = &cipher->base.crt_flags; + u32 tmp[DES_EXPKEY_WORDS]; + int ret; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + if (keylen != DES_KEY_SIZE) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN", + __func__); + return -EINVAL; + } + + ret = des_ekey(tmp, key); + if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) { + *flags |= CRYPTO_TFM_RES_WEAK_KEY; + pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY", + __func__); + return -EINVAL; + } + + memcpy(ctx->key, key, keylen); + ctx->keylen = keylen; + + ctx->updated = 0; + return 0; +} + +static int des3_ablkcipher_setkey(struct crypto_ablkcipher *cipher, + const u8 *key, unsigned int keylen) +{ + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + u32 *flags = &cipher->base.crt_flags; + const u32 *K = (const u32 *)key; + u32 tmp[DES3_EDE_EXPKEY_WORDS]; + int i, ret; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + if (keylen != DES3_EDE_KEY_SIZE) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN", + __func__); + return -EINVAL; + } + + /* Checking key interdependency for weak key detection. */ + if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) || + !((K[2] ^ K[4]) | (K[3] ^ K[5]))) && + (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) { + *flags |= CRYPTO_TFM_RES_WEAK_KEY; + pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY", + __func__); + return -EINVAL; + } + for (i = 0; i < 3; i++) { + ret = des_ekey(tmp, key + i*DES_KEY_SIZE); + if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) { + *flags |= CRYPTO_TFM_RES_WEAK_KEY; + pr_debug(DEV_DBG_NAME " [%s]: " + "CRYPTO_TFM_REQ_WEAK_KEY", __func__); + return -EINVAL; + } + } + + memcpy(ctx->key, key, keylen); + ctx->keylen = keylen; + + ctx->updated = 0; + return 0; +} + +static int cryp_blk_encrypt(struct ablkcipher_request *areq) +{ + struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + ctx->config.algodir = CRYP_ALGORITHM_ENCRYPT; + + /* + * DMA does not work for DES due to a hw bug */ + if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode)) + return ablk_dma_crypt(areq); + + /* For everything except DMA, we run the non DMA version. */ + return ablk_crypt(areq); +} + +static int cryp_blk_decrypt(struct ablkcipher_request *areq) +{ + struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq); + struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher); + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + ctx->config.algodir = CRYP_ALGORITHM_DECRYPT; + + /* DMA does not work for DES due to a hw bug */ + if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode)) + return ablk_dma_crypt(areq); + + /* For everything except DMA, we run the non DMA version. */ + return ablk_crypt(areq); +} + +struct cryp_algo_template { + enum cryp_algo_mode algomode; + struct crypto_alg crypto; +}; + +static int cryp_cra_init(struct crypto_tfm *tfm) +{ + struct cryp_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_alg *alg = tfm->__crt_alg; + struct cryp_algo_template *cryp_alg = container_of(alg, + struct cryp_algo_template, + crypto); + + ctx->config.algomode = cryp_alg->algomode; + ctx->blocksize = crypto_tfm_alg_blocksize(tfm); + + return 0; +} + +static struct cryp_algo_template cryp_algs[] = { + { + .algomode = CRYP_ALGO_AES_ECB, + .crypto = { + .cra_name = "aes", + .cra_driver_name = "aes-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt + } + } + } + }, + { + .algomode = CRYP_ALGO_AES_ECB, + .crypto = { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + } + } + } + }, + { + .algomode = CRYP_ALGO_AES_CBC, + .crypto = { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + .ivsize = AES_BLOCK_SIZE, + } + } + } + }, + { + .algomode = CRYP_ALGO_AES_CTR, + .crypto = { + .cra_name = "ctr(aes)", + .cra_driver_name = "ctr-aes-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + .ivsize = AES_BLOCK_SIZE, + } + } + } + }, + { + .algomode = CRYP_ALGO_DES_ECB, + .crypto = { + .cra_name = "des", + .cra_driver_name = "des-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .setkey = des_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt + } + } + } + + }, + { + .algomode = CRYP_ALGO_TDES_ECB, + .crypto = { + .cra_name = "des3_ede", + .cra_driver_name = "des3_ede-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .setkey = des_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt + } + } + } + }, + { + .algomode = CRYP_ALGO_DES_ECB, + .crypto = { + .cra_name = "ecb(des)", + .cra_driver_name = "ecb-des-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .setkey = des_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + } + } + } + }, + { + .algomode = CRYP_ALGO_TDES_ECB, + .crypto = { + .cra_name = "ecb(des3_ede)", + .cra_driver_name = "ecb-des3_ede-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .setkey = des3_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + } + } + } + }, + { + .algomode = CRYP_ALGO_DES_CBC, + .crypto = { + .cra_name = "cbc(des)", + .cra_driver_name = "cbc-des-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .setkey = des_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + } + } + } + }, + { + .algomode = CRYP_ALGO_TDES_CBC, + .crypto = { + .cra_name = "cbc(des3_ede)", + .cra_driver_name = "cbc-des3_ede-ux500", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | + CRYPTO_ALG_ASYNC, + .cra_blocksize = DES3_EDE_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct cryp_ctx), + .cra_alignmask = 3, + .cra_type = &crypto_ablkcipher_type, + .cra_init = cryp_cra_init, + .cra_module = THIS_MODULE, + .cra_u = { + .ablkcipher = { + .min_keysize = DES3_EDE_KEY_SIZE, + .max_keysize = DES3_EDE_KEY_SIZE, + .setkey = des3_ablkcipher_setkey, + .encrypt = cryp_blk_encrypt, + .decrypt = cryp_blk_decrypt, + .ivsize = DES3_EDE_BLOCK_SIZE, + } + } + } + } +}; + +/** + * cryp_algs_register_all - + */ +static int cryp_algs_register_all(void) +{ + int ret; + int i; + int count; + + pr_debug("[%s]", __func__); + + for (i = 0; i < ARRAY_SIZE(cryp_algs); i++) { + ret = crypto_register_alg(&cryp_algs[i].crypto); + if (ret) { + count = i; + pr_err("[%s] alg registration failed", + cryp_algs[i].crypto.cra_driver_name); + goto unreg; + } + } + return 0; +unreg: + for (i = 0; i < count; i++) + crypto_unregister_alg(&cryp_algs[i].crypto); + return ret; +} + +/** + * cryp_algs_unregister_all - + */ +static void cryp_algs_unregister_all(void) +{ + int i; + + pr_debug(DEV_DBG_NAME " [%s]", __func__); + + for (i = 0; i < ARRAY_SIZE(cryp_algs); i++) + crypto_unregister_alg(&cryp_algs[i].crypto); +} + +static int ux500_cryp_probe(struct platform_device *pdev) +{ + int ret; + int cryp_error = 0; + struct resource *res = NULL; + struct resource *res_irq = NULL; + struct cryp_device_data *device_data; + struct cryp_protection_config prot = { + .privilege_access = CRYP_STATE_ENABLE + }; + struct device *dev = &pdev->dev; + + dev_dbg(dev, "[%s]", __func__); + device_data = kzalloc(sizeof(struct cryp_device_data), GFP_ATOMIC); + if (!device_data) { + dev_err(dev, "[%s]: kzalloc() failed!", __func__); + ret = -ENOMEM; + goto out; + } + + device_data->dev = dev; + device_data->current_ctx = NULL; + + /* Grab the DMA configuration from platform data. */ + mem_to_engine = &((struct cryp_platform_data *) + dev->platform_data)->mem_to_engine; + engine_to_mem = &((struct cryp_platform_data *) + dev->platform_data)->engine_to_mem; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "[%s]: platform_get_resource() failed", + __func__); + ret = -ENODEV; + goto out_kfree; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + dev_err(dev, "[%s]: request_mem_region() failed", + __func__); + ret = -EBUSY; + goto out_kfree; + } + + device_data->base = ioremap(res->start, resource_size(res)); + if (!device_data->base) { + dev_err(dev, "[%s]: ioremap failed!", __func__); + ret = -ENOMEM; + goto out_free_mem; + } + + spin_lock_init(&device_data->ctx_lock); + spin_lock_init(&device_data->power_state_spinlock); + + /* Enable power for CRYP hardware block */ + device_data->pwr_regulator = regulator_get(&pdev->dev, "v-ape"); + if (IS_ERR(device_data->pwr_regulator)) { + dev_err(dev, "[%s]: could not get cryp regulator", __func__); + ret = PTR_ERR(device_data->pwr_regulator); + device_data->pwr_regulator = NULL; + goto out_unmap; + } + + /* Enable the clk for CRYP hardware block */ + device_data->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(device_data->clk)) { + dev_err(dev, "[%s]: clk_get() failed!", __func__); + ret = PTR_ERR(device_data->clk); + goto out_regulator; + } + + /* Enable device power (and clock) */ + ret = cryp_enable_power(device_data->dev, device_data, false); + if (ret) { + dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__); + goto out_clk; + } + + cryp_error = cryp_check(device_data); + if (cryp_error != 0) { + dev_err(dev, "[%s]: cryp_init() failed!", __func__); + ret = -EINVAL; + goto out_power; + } + + cryp_error = cryp_configure_protection(device_data, &prot); + if (cryp_error != 0) { + dev_err(dev, "[%s]: cryp_configure_protection() failed!", + __func__); + ret = -EINVAL; + goto out_power; + } + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) { + dev_err(dev, "[%s]: IORESOURCE_IRQ unavailable", + __func__); + goto out_power; + } + + ret = request_irq(res_irq->start, + cryp_interrupt_handler, + 0, + "cryp1", + device_data); + if (ret) { + dev_err(dev, "[%s]: Unable to request IRQ", __func__); + goto out_power; + } + + if (cryp_mode == CRYP_MODE_DMA) + cryp_dma_setup_channel(device_data, dev); + + platform_set_drvdata(pdev, device_data); + + /* Put the new device into the device list... */ + klist_add_tail(&device_data->list_node, &driver_data.device_list); + + /* ... and signal that a new device is available. */ + up(&driver_data.device_allocation); + + atomic_set(&session_id, 1); + + ret = cryp_algs_register_all(); + if (ret) { + dev_err(dev, "[%s]: cryp_algs_register_all() failed!", + __func__); + goto out_power; + } + + return 0; + +out_power: + cryp_disable_power(device_data->dev, device_data, false); + +out_clk: + clk_put(device_data->clk); + +out_regulator: + regulator_put(device_data->pwr_regulator); + +out_unmap: + iounmap(device_data->base); + +out_free_mem: + release_mem_region(res->start, resource_size(res)); + +out_kfree: + kfree(device_data); +out: + return ret; +} + +static int ux500_cryp_remove(struct platform_device *pdev) +{ + struct resource *res = NULL; + struct resource *res_irq = NULL; + struct cryp_device_data *device_data; + + dev_dbg(&pdev->dev, "[%s]", __func__); + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!", + __func__); + return -ENOMEM; + } + + /* Try to decrease the number of available devices. */ + if (down_trylock(&driver_data.device_allocation)) + return -EBUSY; + + /* Check that the device is free */ + spin_lock(&device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (device_data->current_ctx) { + /* The device is busy */ + spin_unlock(&device_data->ctx_lock); + /* Return the device to the pool. */ + up(&driver_data.device_allocation); + return -EBUSY; + } + + spin_unlock(&device_data->ctx_lock); + + /* Remove the device from the list */ + if (klist_node_attached(&device_data->list_node)) + klist_remove(&device_data->list_node); + + /* If this was the last device, remove the services */ + if (list_empty(&driver_data.device_list.k_list)) + cryp_algs_unregister_all(); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable", + __func__); + else { + disable_irq(res_irq->start); + free_irq(res_irq->start, device_data); + } + + if (cryp_disable_power(&pdev->dev, device_data, false)) + dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed", + __func__); + + clk_put(device_data->clk); + regulator_put(device_data->pwr_regulator); + + iounmap(device_data->base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + + kfree(device_data); + + return 0; +} + +static void ux500_cryp_shutdown(struct platform_device *pdev) +{ + struct resource *res_irq = NULL; + struct cryp_device_data *device_data; + + dev_dbg(&pdev->dev, "[%s]", __func__); + + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!", + __func__); + return; + } + + /* Check that the device is free */ + spin_lock(&device_data->ctx_lock); + /* current_ctx allocates a device, NULL = unallocated */ + if (!device_data->current_ctx) { + if (down_trylock(&driver_data.device_allocation)) + dev_dbg(&pdev->dev, "[%s]: Cryp still in use!" + "Shutting down anyway...", __func__); + /** + * (Allocate the device) + * Need to set this to non-null (dummy) value, + * to avoid usage if context switching. + */ + device_data->current_ctx++; + } + spin_unlock(&device_data->ctx_lock); + + /* Remove the device from the list */ + if (klist_node_attached(&device_data->list_node)) + klist_remove(&device_data->list_node); + + /* If this was the last device, remove the services */ + if (list_empty(&driver_data.device_list.k_list)) + cryp_algs_unregister_all(); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable", + __func__); + else { + disable_irq(res_irq->start); + free_irq(res_irq->start, device_data); + } + + if (cryp_disable_power(&pdev->dev, device_data, false)) + dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed", + __func__); + +} + +static int ux500_cryp_suspend(struct platform_device *pdev, pm_message_t state) +{ + int ret; + struct cryp_device_data *device_data; + struct resource *res_irq; + struct cryp_ctx *temp_ctx = NULL; + + dev_dbg(&pdev->dev, "[%s]", __func__); + + /* Handle state? */ + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!", + __func__); + return -ENOMEM; + } + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + dev_err(&pdev->dev, "[%s]: IORESOURCE_IRQ, unavailable", + __func__); + else + disable_irq(res_irq->start); + + spin_lock(&device_data->ctx_lock); + if (!device_data->current_ctx) + device_data->current_ctx++; + spin_unlock(&device_data->ctx_lock); + + if (device_data->current_ctx == ++temp_ctx) { + if (down_interruptible(&driver_data.device_allocation)) + dev_dbg(&pdev->dev, "[%s]: down_interruptible() " + "failed", __func__); + ret = cryp_disable_power(&pdev->dev, device_data, false); + + } else + ret = cryp_disable_power(&pdev->dev, device_data, true); + + if (ret) + dev_err(&pdev->dev, "[%s]: cryp_disable_power()", __func__); + + return ret; +} + +static int ux500_cryp_resume(struct platform_device *pdev) +{ + int ret = 0; + struct cryp_device_data *device_data; + struct resource *res_irq; + struct cryp_ctx *temp_ctx = NULL; + + dev_dbg(&pdev->dev, "[%s]", __func__); + + device_data = platform_get_drvdata(pdev); + if (!device_data) { + dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!", + __func__); + return -ENOMEM; + } + + spin_lock(&device_data->ctx_lock); + if (device_data->current_ctx == ++temp_ctx) + device_data->current_ctx = NULL; + spin_unlock(&device_data->ctx_lock); + + + if (!device_data->current_ctx) + up(&driver_data.device_allocation); + else + ret = cryp_enable_power(&pdev->dev, device_data, true); + + if (ret) + dev_err(&pdev->dev, "[%s]: cryp_enable_power() failed!", + __func__); + else { + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + enable_irq(res_irq->start); + } + + return ret; +} + +static struct platform_driver cryp_driver = { + .probe = ux500_cryp_probe, + .remove = ux500_cryp_remove, + .shutdown = ux500_cryp_shutdown, + .suspend = ux500_cryp_suspend, + .resume = ux500_cryp_resume, + .driver = { + .owner = THIS_MODULE, + .name = "cryp1" + } +}; + +static int __init ux500_cryp_mod_init(void) +{ + pr_debug("[%s] is called!", __func__); + klist_init(&driver_data.device_list, NULL, NULL); + /* Initialize the semaphore to 0 devices (locked state) */ + sema_init(&driver_data.device_allocation, 0); + return platform_driver_register(&cryp_driver); +} + +static void __exit ux500_cryp_mod_fini(void) +{ + pr_debug("[%s] is called!", __func__); + platform_driver_unregister(&cryp_driver); + return; +} + +module_init(ux500_cryp_mod_init); +module_exit(ux500_cryp_mod_fini); + +module_param(cryp_mode, int, 0); + +MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 CRYP crypto engine."); +MODULE_ALIAS("aes-all"); +MODULE_ALIAS("des-all"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/crypto/ux500/cryp/cryp_irq.c b/drivers/crypto/ux500/cryp/cryp_irq.c new file mode 100644 index 0000000..08d291c --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp_irq.c @@ -0,0 +1,45 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2. + */ + +#include <linux/kernel.h> +#include <linux/bitmap.h> +#include <linux/device.h> + +#include "cryp.h" +#include "cryp_p.h" +#include "cryp_irq.h" +#include "cryp_irqp.h" + +void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src) +{ + u32 i; + + dev_dbg(device_data->dev, "[%s]", __func__); + + i = readl_relaxed(&device_data->base->imsc); + i = i | irq_src; + writel_relaxed(i, &device_data->base->imsc); +} + +void cryp_disable_irq_src(struct cryp_device_data *device_data, u32 irq_src) +{ + u32 i; + + dev_dbg(device_data->dev, "[%s]", __func__); + + i = readl_relaxed(&device_data->base->imsc); + i = i & ~irq_src; + writel_relaxed(i, &device_data->base->imsc); +} + +bool cryp_pending_irq_src(struct cryp_device_data *device_data, u32 irq_src) +{ + return (readl_relaxed(&device_data->base->mis) & irq_src) > 0; +} diff --git a/drivers/crypto/ux500/cryp/cryp_irq.h b/drivers/crypto/ux500/cryp/cryp_irq.h new file mode 100644 index 0000000..5a7837f --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp_irq.h @@ -0,0 +1,31 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef _CRYP_IRQ_H_ +#define _CRYP_IRQ_H_ + +#include "cryp.h" + +enum cryp_irq_src_id { + CRYP_IRQ_SRC_INPUT_FIFO = 0x1, + CRYP_IRQ_SRC_OUTPUT_FIFO = 0x2, + CRYP_IRQ_SRC_ALL = 0x3 +}; + +/** + * M0 Funtions + */ +void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src); + +void cryp_disable_irq_src(struct cryp_device_data *device_data, u32 irq_src); + +bool cryp_pending_irq_src(struct cryp_device_data *device_data, u32 irq_src); + +#endif /* _CRYP_IRQ_H_ */ diff --git a/drivers/crypto/ux500/cryp/cryp_irqp.h b/drivers/crypto/ux500/cryp/cryp_irqp.h new file mode 100644 index 0000000..8b339cc --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp_irqp.h @@ -0,0 +1,125 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CRYP_IRQP_H_ +#define __CRYP_IRQP_H_ + +#include "cryp_irq.h" + +/** + * + * CRYP Registers - Offset mapping + * +-----------------+ + * 00h | CRYP_CR | Configuration register + * +-----------------+ + * 04h | CRYP_SR | Status register + * +-----------------+ + * 08h | CRYP_DIN | Data In register + * +-----------------+ + * 0ch | CRYP_DOUT | Data out register + * +-----------------+ + * 10h | CRYP_DMACR | DMA control register + * +-----------------+ + * 14h | CRYP_IMSC | IMSC + * +-----------------+ + * 18h | CRYP_RIS | Raw interrupt status + * +-----------------+ + * 1ch | CRYP_MIS | Masked interrupt status. + * +-----------------+ + * Key registers + * IVR registers + * Peripheral + * Cell IDs + * + * Refer data structure for other register map + */ + +/** + * struct cryp_register + * @cr - Configuration register + * @status - Status register + * @din - Data input register + * @din_size - Data input size register + * @dout - Data output register + * @dout_size - Data output size register + * @dmacr - Dma control register + * @imsc - Interrupt mask set/clear register + * @ris - Raw interrupt status + * @mis - Masked interrupt statu register + * @key_1_l - Key register 1 L + * @key_1_r - Key register 1 R + * @key_2_l - Key register 2 L + * @key_2_r - Key register 2 R + * @key_3_l - Key register 3 L + * @key_3_r - Key register 3 R + * @key_4_l - Key register 4 L + * @key_4_r - Key register 4 R + * @init_vect_0_l - init vector 0 L + * @init_vect_0_r - init vector 0 R + * @init_vect_1_l - init vector 1 L + * @init_vect_1_r - init vector 1 R + * @cryp_unused1 - unused registers + * @itcr - Integration test control register + * @itip - Integration test input register + * @itop - Integration test output register + * @cryp_unused2 - unused registers + * @periphId0 - FE0 CRYP Peripheral Identication Register + * @periphId1 - FE4 + * @periphId2 - FE8 + * @periphId3 - FEC + * @pcellId0 - FF0 CRYP PCell Identication Register + * @pcellId1 - FF4 + * @pcellId2 - FF8 + * @pcellId3 - FFC + */ +struct cryp_register { + u32 cr; /* Configuration register */ + u32 sr; /* Status register */ + u32 din; /* Data input register */ + u32 din_size; /* Data input size register */ + u32 dout; /* Data output register */ + u32 dout_size; /* Data output size register */ + u32 dmacr; /* Dma control register */ + u32 imsc; /* Interrupt mask set/clear register */ + u32 ris; /* Raw interrupt status */ + u32 mis; /* Masked interrupt statu register */ + + u32 key_1_l; /*Key register 1 L */ + u32 key_1_r; /*Key register 1 R */ + u32 key_2_l; /*Key register 2 L */ + u32 key_2_r; /*Key register 2 R */ + u32 key_3_l; /*Key register 3 L */ + u32 key_3_r; /*Key register 3 R */ + u32 key_4_l; /*Key register 4 L */ + u32 key_4_r; /*Key register 4 R */ + + u32 init_vect_0_l; /*init vector 0 L */ + u32 init_vect_0_r; /*init vector 0 R */ + u32 init_vect_1_l; /*init vector 1 L */ + u32 init_vect_1_r; /*init vector 1 R */ + + u32 cryp_unused1[(0x80 - 0x58) / sizeof(u32)]; /* unused registers */ + u32 itcr; /*Integration test control register */ + u32 itip; /*Integration test input register */ + u32 itop; /*Integration test output register */ + u32 cryp_unused2[(0xFE0 - 0x8C) / sizeof(u32)]; /* unused registers */ + + u32 periphId0; /* FE0 CRYP Peripheral Identication Register */ + u32 periphId1; /* FE4 */ + u32 periphId2; /* FE8 */ + u32 periphId3; /* FEC */ + + u32 pcellId0; /* FF0 CRYP PCell Identication Register */ + u32 pcellId1; /* FF4 */ + u32 pcellId2; /* FF8 */ + u32 pcellId3; /* FFC */ +}; + +#endif diff --git a/drivers/crypto/ux500/cryp/cryp_p.h b/drivers/crypto/ux500/cryp/cryp_p.h new file mode 100644 index 0000000..0e07082 --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp_p.h @@ -0,0 +1,124 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef _CRYP_P_H_ +#define _CRYP_P_H_ + +#include <linux/io.h> +#include <linux/bitops.h> + +#include "cryp.h" +#include "cryp_irqp.h" + +/** + * Generic Macros + */ +#define CRYP_SET_BITS(reg_name, mask) \ + writel_relaxed((readl_relaxed(reg_name) | mask), reg_name) + +#define CRYP_WRITE_BIT(reg_name, val, mask) \ + writel_relaxed(((readl_relaxed(reg_name) & ~(mask)) |\ + ((val) & (mask))), reg_name) + +#define CRYP_TEST_BITS(reg_name, val) \ + (readl_relaxed(reg_name) & (val)) + +#define CRYP_PUT_BITS(reg, val, shift, mask) \ + writel_relaxed(((readl_relaxed(reg) & ~(mask)) | \ + (((u32)val << shift) & (mask))), reg) + +/** + * CRYP specific Macros + */ +#define CRYP_PERIPHERAL_ID0 0xE3 +#define CRYP_PERIPHERAL_ID1 0x05 + +#define CRYP_PERIPHERAL_ID2_DB8500 0x28 +#define CRYP_PERIPHERAL_ID2_DB5500 0x29 +#define CRYP_PERIPHERAL_ID3 0x00 + +#define CRYP_PCELL_ID0 0x0D +#define CRYP_PCELL_ID1 0xF0 +#define CRYP_PCELL_ID2 0x05 +#define CRYP_PCELL_ID3 0xB1 + +/** + * CRYP register default values + */ +#define MAX_DEVICE_SUPPORT 2 + +/* Priv set, keyrden set and datatype 8bits swapped set as default. */ +#define CRYP_CR_DEFAULT 0x0482 +#define CRYP_DMACR_DEFAULT 0x0 +#define CRYP_IMSC_DEFAULT 0x0 +#define CRYP_DIN_DEFAULT 0x0 +#define CRYP_DOUT_DEFAULT 0x0 +#define CRYP_KEY_DEFAULT 0x0 +#define CRYP_INIT_VECT_DEFAULT 0x0 + +/** + * CRYP Control register specific mask + */ +#define CRYP_CR_SECURE_MASK BIT(0) +#define CRYP_CR_PRLG_MASK BIT(1) +#define CRYP_CR_ALGODIR_MASK BIT(2) +#define CRYP_CR_ALGOMODE_MASK (BIT(5) | BIT(4) | BIT(3)) +#define CRYP_CR_DATATYPE_MASK (BIT(7) | BIT(6)) +#define CRYP_CR_KEYSIZE_MASK (BIT(9) | BIT(8)) +#define CRYP_CR_KEYRDEN_MASK BIT(10) +#define CRYP_CR_KSE_MASK BIT(11) +#define CRYP_CR_START_MASK BIT(12) +#define CRYP_CR_INIT_MASK BIT(13) +#define CRYP_CR_FFLUSH_MASK BIT(14) +#define CRYP_CR_CRYPEN_MASK BIT(15) +#define CRYP_CR_CONTEXT_SAVE_MASK (CRYP_CR_SECURE_MASK |\ + CRYP_CR_PRLG_MASK |\ + CRYP_CR_ALGODIR_MASK |\ + CRYP_CR_ALGOMODE_MASK |\ + CRYP_CR_DATATYPE_MASK |\ + CRYP_CR_KEYSIZE_MASK |\ + CRYP_CR_KEYRDEN_MASK |\ + CRYP_CR_DATATYPE_MASK) + + +#define CRYP_SR_INFIFO_READY_MASK (BIT(0) | BIT(1)) +#define CRYP_SR_IFEM_MASK BIT(0) +#define CRYP_SR_BUSY_MASK BIT(4) + +/** + * Bit position used while setting bits in register + */ +#define CRYP_CR_PRLG_POS 1 +#define CRYP_CR_ALGODIR_POS 2 +#define CRYP_CR_ALGOMODE_POS 3 +#define CRYP_CR_DATATYPE_POS 6 +#define CRYP_CR_KEYSIZE_POS 8 +#define CRYP_CR_KEYRDEN_POS 10 +#define CRYP_CR_KSE_POS 11 +#define CRYP_CR_START_POS 12 +#define CRYP_CR_INIT_POS 13 +#define CRYP_CR_CRYPEN_POS 15 + +#define CRYP_SR_BUSY_POS 4 + +/** + * CRYP PCRs------PC_NAND control register + * BIT_MASK + */ +#define CRYP_DMA_REQ_MASK (BIT(1) | BIT(0)) +#define CRYP_DMA_REQ_MASK_POS 0 + + +struct cryp_system_context { + /* CRYP Register structure */ + struct cryp_register *p_cryp_reg[MAX_DEVICE_SUPPORT]; +}; + +#endif |