diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-14 20:42:43 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-14 20:42:43 (GMT) |
commit | 2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc (patch) | |
tree | e35a625496acc6ac852846d40b8851186b9d1ac4 /drivers | |
parent | 44b7532b8b464f606053562400719c9c21276037 (diff) | |
parent | ce53895a5d24e0ee19fb92f56c17323fb4c9ab27 (diff) | |
download | linux-fsl-qoriq-2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc.tar.xz |
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
MAINTAINERS: EB110ATX is not ebsa110
MAINTAINERS: update Eric Miao's email address and status
fb: add support of LCD display controller on pxa168/910 (base layer)
[ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
[ARM] 5544/1: Trust PrimeCell resource sizes
[ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
[ARM] pxa/sharpsl_pm: drop set_irq_type calls
[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
[ARM] sa1100: remove unused collie_pm.c
[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
[ARM] 5550/1: Add default configure file for w90p910 platform
[ARM] 5549/1: Add clock api for w90p910 platform.
[ARM] 5548/1: Add gpio api for w90p910 platform
[ARM] 5551/1: Add multi-function pin api for w90p910 platform.
[ARM] Make ARM_VIC_NR depend on ARM_VIC
[ARM] 5546/1: ARM PL022 SSP/SPI driver v3
ARM: OMAP4: SMP: Update defconfig for OMAP4430
ARM: OMAP4: SMP: Enable SMP support for OMAP4430
...
Diffstat (limited to 'drivers')
43 files changed, 4145 insertions, 178 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9120717..2aa1908 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -535,6 +535,15 @@ config PATA_OPTIDMA If unsure, say N. +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + config PATA_PCMCIA tristate "PCMCIA PATA support" depends on PCMCIA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 7f1ecf9..1558059 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c new file mode 100644 index 0000000..11fb4cc --- /dev/null +++ b/drivers/ata/pata_palmld.c @@ -0,0 +1,150 @@ +/* + * drivers/ata/pata_palmld.c + * + * Driver for IDE channel in Palm LifeDrive + * + * Based on research of: + * Alex Osborne <ato@meshy.org> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * Rewritten version based on pata_ixp4xx_cf.c: + * ixp4xx PATA/Compact Flash driver + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/libata.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <scsi/scsi_host.h> +#include <mach/palmld.h> + +#define DRV_NAME "pata_palmld" + +static struct scsi_host_template palmld_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations palmld_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, +}; + +static __devinit int palmld_pata_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *mem; + int ret; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + /* remap drive's physical memory address */ + mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000); + if (!mem) + return -ENOMEM; + + /* request and activate power GPIO, IRQ GPIO */ + ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR"); + if (ret) + goto err1; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0); + if (ret) + goto err3; + + /* reset the drive */ + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0); + msleep(30); + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1); + msleep(30); + + /* setup the ata port */ + ap = host->ports[0]; + ap->ops = &palmld_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING; + + /* memory mapping voodoo */ + ap->ioaddr.cmd_addr = mem + 0x10; + ap->ioaddr.altstatus_addr = mem + 0xe; + ap->ioaddr.ctl_addr = mem + 0xe; + + /* start the port */ + ata_sff_std_ports(&ap->ioaddr); + + /* activate host */ + return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, + &palmld_sht); + +err3: + gpio_free(GPIO_NR_PALMLD_IDE_RESET); +err2: + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); +err1: + return ret; +} + +static __devexit int palmld_pata_remove(struct platform_device *dev) +{ + struct ata_host *host = platform_get_drvdata(dev); + + ata_host_detach(host); + + /* power down the HDD */ + gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0); + + gpio_free(GPIO_NR_PALMLD_IDE_RESET); + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); + + return 0; +} + +static struct platform_driver palmld_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = palmld_pata_probe, + .remove = __devexit_p(palmld_pata_remove), +}; + +static int __init palmld_pata_init(void) +{ + return platform_driver_register(&palmld_pata_platform_driver); +} + +static void __exit palmld_pata_exit(void) +{ + platform_driver_unregister(&palmld_pata_platform_driver); +} + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PalmLD PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(palmld_pata_init); +module_exit(palmld_pata_exit); diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 9c00440..f4b3f72 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO To compile this driver as a module, choose M here: the module will be called virtio-rng. If unsure, say N. + +config HW_RANDOM_MXC_RNGA + tristate "Freescale i.MX RNGA Random Number Generator" + depends on HW_RANDOM && ARCH_HAS_RNGA + ---help--- + This driver provides kernel-side support for the Random Number + Generator hardware found on Freescale i.MX processors. + + To compile this driver as a module, choose M here: the + module will be called mxc-rnga. + + If unsure, say Y. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index e81d21a..fd1ecd2 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o +obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c new file mode 100644 index 0000000..187c6be --- /dev/null +++ b/drivers/char/hw_random/mxc-rnga.c @@ -0,0 +1,247 @@ +/* + * RNG driver for Freescale RNGA + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Author: Alan Carvalho de Assis <acassis@gmail.com> + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + * + * This driver is based on other RNG drivers. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/hw_random.h> +#include <linux/io.h> + +/* RNGA Registers */ +#define RNGA_CONTROL 0x00 +#define RNGA_STATUS 0x04 +#define RNGA_ENTROPY 0x08 +#define RNGA_OUTPUT_FIFO 0x0c +#define RNGA_MODE 0x10 +#define RNGA_VERIFICATION_CONTROL 0x14 +#define RNGA_OSC_CONTROL_COUNTER 0x18 +#define RNGA_OSC1_COUNTER 0x1c +#define RNGA_OSC2_COUNTER 0x20 +#define RNGA_OSC_COUNTER_STATUS 0x24 + +/* RNGA Registers Range */ +#define RNG_ADDR_RANGE 0x28 + +/* RNGA Control Register */ +#define RNGA_CONTROL_SLEEP 0x00000010 +#define RNGA_CONTROL_CLEAR_INT 0x00000008 +#define RNGA_CONTROL_MASK_INTS 0x00000004 +#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002 +#define RNGA_CONTROL_GO 0x00000001 + +#define RNGA_STATUS_LEVEL_MASK 0x0000ff00 + +/* RNGA Status Register */ +#define RNGA_STATUS_OSC_DEAD 0x80000000 +#define RNGA_STATUS_SLEEP 0x00000010 +#define RNGA_STATUS_ERROR_INT 0x00000008 +#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004 +#define RNGA_STATUS_LAST_READ_STATUS 0x00000002 +#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001 + +static struct platform_device *rng_dev; + +static int mxc_rnga_data_present(struct hwrng *rng) +{ + int level; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* how many random numbers is in FIFO? [0-16] */ + level = ((__raw_readl(rng_base + RNGA_STATUS) & + RNGA_STATUS_LEVEL_MASK) >> 8); + + return level > 0 ? 1 : 0; +} + +static int mxc_rnga_data_read(struct hwrng *rng, u32 * data) +{ + int err; + u32 ctrl; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* retrieve a random number from FIFO */ + *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO); + + /* some error while reading this random number? */ + err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT; + + /* if error: clear error interrupt, but doesn't return random number */ + if (err) { + dev_dbg(&rng_dev->dev, "Error while reading random number!\n"); + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT, + rng_base + RNGA_CONTROL); + return 0; + } else + return 4; +} + +static int mxc_rnga_init(struct hwrng *rng) +{ + u32 ctrl, osc; + void __iomem *rng_base = (void __iomem *)rng->priv; + + /* wake up */ + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL); + + /* verify if oscillator is working */ + osc = __raw_readl(rng_base + RNGA_STATUS); + if (osc & RNGA_STATUS_OSC_DEAD) { + dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n"); + return -ENODEV; + } + + /* go running */ + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL); + + return 0; +} + +static void mxc_rnga_cleanup(struct hwrng *rng) +{ + u32 ctrl; + void __iomem *rng_base = (void __iomem *)rng->priv; + + ctrl = __raw_readl(rng_base + RNGA_CONTROL); + + /* stop rnga */ + __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL); +} + +static struct hwrng mxc_rnga = { + .name = "mxc-rnga", + .init = mxc_rnga_init, + .cleanup = mxc_rnga_cleanup, + .data_present = mxc_rnga_data_present, + .data_read = mxc_rnga_data_read +}; + +static int __init mxc_rnga_probe(struct platform_device *pdev) +{ + int err = -ENODEV; + struct clk *clk; + struct resource *res, *mem; + void __iomem *rng_base = NULL; + + if (rng_dev) + return -EBUSY; + + clk = clk_get(&pdev->dev, "rng"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Could not get rng_clk!\n"); + err = PTR_ERR(clk); + goto out; + } + + clk_enable(clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + err = -ENOENT; + goto err_region; + } + + mem = request_mem_region(res->start, resource_size(res), pdev->name); + if (mem == NULL) { + err = -EBUSY; + goto err_region; + } + + rng_base = ioremap(res->start, resource_size(res)); + if (!rng_base) { + err = -ENOMEM; + goto err_ioremap; + } + + mxc_rnga.priv = (unsigned long)rng_base; + + err = hwrng_register(&mxc_rnga); + if (err) { + dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err); + goto err_register; + } + + rng_dev = pdev; + + dev_info(&pdev->dev, "MXC RNGA Registered.\n"); + + return 0; + +err_register: + iounmap(rng_base); + rng_base = NULL; + +err_ioremap: + release_mem_region(res->start, resource_size(res)); + +err_region: + clk_disable(clk); + clk_put(clk); + +out: + return err; +} + +static int __exit mxc_rnga_remove(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + void __iomem *rng_base = (void __iomem *)mxc_rnga.priv; + struct clk *clk = clk_get(&pdev->dev, "rng"); + + hwrng_unregister(&mxc_rnga); + + iounmap(rng_base); + + release_mem_region(res->start, resource_size(res)); + + clk_disable(clk); + clk_put(clk); + + return 0; +} + +static struct platform_driver mxc_rnga_driver = { + .driver = { + .name = "mxc_rnga", + .owner = THIS_MODULE, + }, + .remove = __exit_p(mxc_rnga_remove), +}; + +static int __init mod_init(void) +{ + return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe); +} + +static void __exit mod_exit(void) +{ + platform_driver_unregister(&mxc_rnga_driver); +} + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("H/W RNGA driver for i.MX"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index acc7143..035a6c7 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -34,10 +34,24 @@ #include <linux/err.h> #include <linux/clk.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> -#include <mach/i2c.h> +#include <plat/i2c.h> + +/* + * I2C register offsets will be shifted 0 or 1 bit left, depending on + * different SoCs + */ +#define REG_SHIFT_0 (0 << 0) +#define REG_SHIFT_1 (1 << 0) +#define REG_SHIFT(d) ((d) & 0x1) + +static const struct platform_device_id i2c_pxa_id_table[] = { + { "pxa2xx-i2c", REG_SHIFT_1 }, + { "pxa3xx-pwri2c", REG_SHIFT_0 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); /* * I2C registers and bit definitions @@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev) struct pxa_i2c *i2c; struct resource *res; struct i2c_pxa_platform_data *plat = dev->dev.platform_data; + struct platform_device_id *id = platform_get_device_id(dev); int ret; int irq; @@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = -EIO; goto eremap; } - i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1; + i2c->reg_shift = REG_SHIFT(id->driver_data); i2c->iobase = res->start; i2c->iosize = res_len(res); @@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, }, + .id_table = i2c_pxa_id_table, }; static int __init i2c_adap_pxa_init(void) diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index a28c06d..89b3941 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) io->dev.parent = &dev->dev; kmi->io = io; - kmi->base = ioremap(dev->res.start, KMI_SIZE); + kmi->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!kmi->base) { ret = -ENOMEM; goto out; diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c index 1aa46a3..173d104 100644 --- a/drivers/leds/leds-h1940.c +++ b/drivers/leds/leds-h1940.c @@ -16,6 +16,8 @@ #include <linux/string.h> #include <linux/ctype.h> #include <linux/leds.h> +#include <linux/gpio.h> + #include <mach/regs-gpio.h> #include <mach/hardware.h> #include <mach/h1940-latch.h> diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c index aa2e7ae..aa7acf3 100644 --- a/drivers/leds/leds-s3c24xx.c +++ b/drivers/leds/leds-s3c24xx.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 9d48da2..57835f5 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -758,10 +758,14 @@ config VIDEO_MX1 ---help--- This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface +config MX3_VIDEO + bool + config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG + select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b4cf691..3eb87bd 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -155,7 +155,7 @@ config MMC_ATMELMCI_DMA config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" - depends on ARCH_IMX + depends on ARCH_MX1 help This selects the Motorola i.MX Multimedia card Interface. If you have a i.MX platform with a Multimedia Card slot, diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7d4febd..e1aa847 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->base = ioremap(dev->res.start, SZ_4K); + host->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!host->base) { ret = -ENOMEM; goto clk_disable; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index c40cb96..1cf9cfb 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev) mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; - mmc->ocr_avail = mmc_slot(host).ocr_mask; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; if (pdata->slots[host->slot_id].wires >= 8) @@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev) goto err_irq; } + /* initialize power supplies, gpios, etc */ if (pdata->init != NULL) { if (pdata->init(&pdev->dev) != 0) { - dev_dbg(mmc_dev(host->mmc), - "Unable to configure MMC IRQs\n"); + dev_dbg(mmc_dev(host->mmc), "late init error\n"); goto err_irq_cd_init; } } + mmc->ocr_avail = mmc_slot(host).ocr_mask; /* Request IRQ for card detect */ if ((mmc_slot(host).card_detect_irq)) { diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 2db166b..4eb4f37 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -17,6 +17,7 @@ #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/cpufreq.h> +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> @@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, last_source = source; - s3c2410_dma_devconfig(host->dma, source, 3, + s3c2410_dma_devconfig(host->dma, source, host->mem->start + host->sdidata); if (!setup_ok) { @@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: default: s3c2410_gpio_setpin(S3C2410_GPE5, 0); - s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT); if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index f2e9de1..6391e3d 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -39,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/onenand.h> #include <mach/gpio.h> -#include <mach/pm.h> #include <mach/dma.h> diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index a740053..b6d1881 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys, debug_desc(phys, desc); BUG_ON(phys & 0x1F); qmgr_put_entry(queue, phys); - BUG_ON(qmgr_stat_overflow(queue)); + /* Don't check for queue overflow here, we've allocated sufficient + length and queues >= 32 don't support this check anyway. */ } @@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget) #endif napi_complete(napi); qmgr_enable_irq(rxq); - if (!qmgr_stat_empty(rxq) && - napi_reschedule(napi)) { + if (!qmgr_stat_below_low_watermark(rxq) && + napi_reschedule(napi)) { /* not empty again */ #if DEBUG_RX printk(KERN_DEBUG "%s: eth_poll" " napi_reschedule successed\n", @@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused) port->tx_buff_tab[n_desc] = NULL; } - start = qmgr_stat_empty(port->plat->txreadyq); + start = qmgr_stat_below_low_watermark(port->plat->txreadyq); queue_put_desc(port->plat->txreadyq, phys, desc); - if (start) { + if (start) { /* TX-ready queue was empty */ #if DEBUG_TX printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n", port->netdev->name); @@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev) queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc); dev->trans_start = jiffies; - if (qmgr_stat_empty(txreadyq)) { + if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ #if DEBUG_TX printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name); #endif netif_stop_queue(dev); /* we could miss TX ready interrupt */ - if (!qmgr_stat_empty(txreadyq)) { + /* really empty in fact */ + if (!qmgr_stat_below_low_watermark(txreadyq)) { #if DEBUG_TX printk(KERN_DEBUG "%s: eth_xmit ready again\n", dev->name); @@ -814,29 +816,29 @@ static int request_queues(struct port *port) int err; err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0, - "%s:RX-free", port->netdev->name); + "%s:RX-free", port->netdev->name); if (err) return err; err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0, - "%s:RX", port->netdev->name); + "%s:RX", port->netdev->name); if (err) goto rel_rxfree; err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0, - "%s:TX", port->netdev->name); + "%s:TX", port->netdev->name); if (err) goto rel_rx; err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0, - "%s:TX-ready", port->netdev->name); + "%s:TX-ready", port->netdev->name); if (err) goto rel_tx; /* TX-done queue handles skbs sent out by the NPEs */ if (!ports_open) { err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0, - "%s:TX-done", DRV_NAME); + "%s:TX-done", DRV_NAME); if (err) goto rel_txready; } diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 329f890..f1f773b 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -45,7 +45,8 @@ defined(CONFIG_MACH_ZYLONITE) ||\ defined(CONFIG_MACH_LITTLETON) ||\ defined(CONFIG_MACH_ZYLONITE2) ||\ - defined(CONFIG_ARCH_VIPER) + defined(CONFIG_ARCH_VIPER) ||\ + defined(CONFIG_MACH_STARGATE2) #include <asm/mach-types.h> @@ -73,7 +74,7 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) { - if (machine_is_mainstone() && reg & 2) { + if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) { unsigned int v = val << 16; v |= readl(ioaddr + (reg & ~2)) & 0xffff; writel(v, ioaddr + (reg & ~2)); diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 765a7f5..a6dc317 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys, debug_desc(phys, desc); BUG_ON(phys & 0x1F); qmgr_put_entry(queue, phys); - BUG_ON(qmgr_stat_overflow(queue)); + /* Don't check for queue overflow here, we've allocated sufficient + length and queues >= 32 don't support this check anyway. */ } @@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev) free_buffer_irq(port->tx_buff_tab[n_desc]); port->tx_buff_tab[n_desc] = NULL; - start = qmgr_stat_empty(port->plat->txreadyq); + start = qmgr_stat_below_low_watermark(port->plat->txreadyq); queue_put_desc(port->plat->txreadyq, tx_desc_phys(port, n_desc), desc); - if (start) { + if (start) { /* TX-ready queue was empty */ #if DEBUG_TX printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit" " ready\n", dev->name); @@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev) queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc); dev->trans_start = jiffies; - if (qmgr_stat_empty(txreadyq)) { + if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ #if DEBUG_TX printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name); #endif netif_stop_queue(dev); /* we could miss TX ready interrupt */ - if (!qmgr_stat_empty(txreadyq)) { + if (!qmgr_stat_below_low_watermark(txreadyq)) { #if DEBUG_TX printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n", dev->name); diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 2764735..fbf965b 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -217,7 +217,7 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCH_VIPER || ARCH_PXA_ESERIES) + || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2) help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index bbac463..047394d 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o +pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c new file mode 100644 index 0000000..490749e --- /dev/null +++ b/drivers/pcmcia/pxa2xx_stargate2.c @@ -0,0 +1,174 @@ +/* + * linux/drivers/pcmcia/pxa2xx_stargate2.c + * + * Stargate 2 PCMCIA specific routines. + * + * Created: December 6, 2005 + * Author: Ed C. Epp + * Copyright: Intel Corp 2005 + * Jonathan Cameron <jic23@cam.ac.uk> 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <pcmcia/ss.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include "soc_common.h" + +#define SG2_S0_BUFF_CTL 120 +#define SG2_S0_POWER_CTL 108 +#define SG2_S0_GPIO_RESET 82 +#define SG2_S0_GPIO_DETECT 53 +#define SG2_S0_GPIO_READY 81 + +static struct pcmcia_irqs irqs[] = { + { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" }, +}; + +static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY); + return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT); + state->ready = !!gpio_get_value(SG2_S0_GPIO_READY); + state->bvd1 = 0; /* not available - battery detect on card */ + state->bvd2 = 0; /* not available */ + state->vs_3v = 1; /* not available - voltage detect for card */ + state->vs_Xv = 0; /* not available */ + state->wrprot = 0; /* not available - write protect */ +} + +static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + /* Enable card power */ + switch (state->Vcc) { + case 0: + /* sets power ctl register high */ + gpio_set_value(SG2_S0_POWER_CTL, 1); + break; + case 33: + case 50: + /* sets power control register low (clear) */ + gpio_set_value(SG2_S0_POWER_CTL, 0); + msleep(100); + break; + default: + pr_err("%s(): bad Vcc %u\n", + __func__, state->Vcc); + return -1; + } + + /* reset */ + gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); + + return 0; +} + +static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { + .owner = THIS_MODULE, + .hw_init = sg2_pcmcia_hw_init, + .hw_shutdown = sg2_pcmcia_hw_shutdown, + .socket_state = sg2_pcmcia_socket_state, + .configure_socket = sg2_pcmcia_configure_socket, + .socket_init = sg2_pcmcia_socket_init, + .socket_suspend = sg2_pcmcia_socket_suspend, + .nr = 1, +}; + +static struct platform_device *sg2_pcmcia_device; + +static int __init sg2_pcmcia_init(void) +{ + int ret; + + if (!machine_is_stargate2()) + return -ENODEV; + + sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!sg2_pcmcia_device) + return -ENOMEM; + + ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl"); + if (ret) + goto error_put_platform_device; + ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl"); + if (ret) + goto error_free_gpio_buff_ctl; + ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset"); + if (ret) + goto error_free_gpio_power_ctl; + /* Set gpio directions */ + gpio_direction_output(SG2_S0_BUFF_CTL, 0); + gpio_direction_output(SG2_S0_POWER_CTL, 1); + gpio_direction_output(SG2_S0_GPIO_RESET, 1); + + ret = platform_device_add_data(sg2_pcmcia_device, + &sg2_pcmcia_ops, + sizeof(sg2_pcmcia_ops)); + if (ret) + goto error_free_gpio_reset; + + ret = platform_device_add(sg2_pcmcia_device); + if (ret) + goto error_free_gpio_reset; + + return 0; +error_free_gpio_reset: + gpio_free(SG2_S0_GPIO_RESET); +error_free_gpio_power_ctl: + gpio_free(SG2_S0_POWER_CTL); +error_free_gpio_buff_ctl: + gpio_free(SG2_S0_BUFF_CTL); +error_put_platform_device: + platform_device_put(sg2_pcmcia_device); + + return ret; +} + +static void __exit sg2_pcmcia_exit(void) +{ + platform_device_unregister(sg2_pcmcia_device); + gpio_free(SG2_S0_BUFF_CTL); + gpio_free(SG2_S0_POWER_CTL); + gpio_free(SG2_S0_GPIO_RESET); +} + +fs_initcall(sg2_pcmcia_init); +module_exit(sg2_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c index f7a3283..551332e 100644 --- a/drivers/rtc/rtc-ep93xx.c +++ b/drivers/rtc/rtc-ep93xx.c @@ -12,32 +12,56 @@ #include <linux/module.h> #include <linux/rtc.h> #include <linux/platform_device.h> -#include <mach/hardware.h> +#include <linux/io.h> + +#define EP93XX_RTC_DATA 0x000 +#define EP93XX_RTC_MATCH 0x004 +#define EP93XX_RTC_STATUS 0x008 +#define EP93XX_RTC_STATUS_INTR (1<<0) +#define EP93XX_RTC_LOAD 0x00C +#define EP93XX_RTC_CONTROL 0x010 +#define EP93XX_RTC_CONTROL_MIE (1<<0) +#define EP93XX_RTC_SWCOMP 0x108 +#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000 +#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16 +#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff +#define EP93XX_RTC_SWCOMP_INT_SHIFT 0 + +#define DRV_VERSION "0.3" -#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x)) -#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000) -#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C) -#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108) - -#define DRV_VERSION "0.2" +/* + * struct device dev.platform_data is used to store our private data + * because struct rtc_device does not have a variable to hold it. + */ +struct ep93xx_rtc { + void __iomem *mmio_base; +}; -static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload, +static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload, unsigned short *delete) { - unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + unsigned long comp; + + comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP); if (preload) - *preload = comp & 0xffff; + *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK) + >> EP93XX_RTC_SWCOMP_INT_SHIFT; if (delete) - *delete = (comp >> 16) & 0x1f; + *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK) + >> EP93XX_RTC_SWCOMP_DEL_SHIFT; return 0; } static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm) { - unsigned long time = __raw_readl(EP93XX_RTC_DATA); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + unsigned long time; + + time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA); rtc_time_to_tm(time, tm); return 0; @@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm) static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs) { - __raw_writel(secs + 1, EP93XX_RTC_LOAD); + struct ep93xx_rtc *ep93xx_rtc = dev->platform_data; + + __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD); return 0; } @@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq) { unsigned short preload, delete; - ep93xx_get_swcomp(dev, &preload, &delete); + ep93xx_rtc_get_swcomp(dev, &preload, &delete); seq_printf(seq, "preload\t\t: %d\n", preload); seq_printf(seq, "delete\t\t: %d\n", delete); @@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = { .proc = ep93xx_rtc_proc, }; -static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev, +static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev, struct device_attribute *attr, char *buf) { unsigned short preload; - ep93xx_get_swcomp(dev, &preload, NULL); + ep93xx_rtc_get_swcomp(dev, &preload, NULL); return sprintf(buf, "%d\n", preload); } -static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL); +static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL); -static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev, +static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev, struct device_attribute *attr, char *buf) { unsigned short delete; - ep93xx_get_swcomp(dev, NULL, &delete); + ep93xx_rtc_get_swcomp(dev, NULL, &delete); return sprintf(buf, "%d\n", delete); } -static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL); +static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL); -static int __devinit ep93xx_rtc_probe(struct platform_device *dev) +static int __init ep93xx_rtc_probe(struct platform_device *pdev) { - struct rtc_device *rtc = rtc_device_register("ep93xx", - &dev->dev, &ep93xx_rtc_ops, THIS_MODULE); + struct ep93xx_rtc *ep93xx_rtc; + struct resource *res; + struct rtc_device *rtc; + int err; + + ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL); + if (ep93xx_rtc == NULL) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENXIO; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) + return -EBUSY; + + ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res)); + if (ep93xx_rtc->mmio_base == NULL) { + err = -ENXIO; + goto fail; + } + pdev->dev.platform_data = ep93xx_rtc; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { - return PTR_ERR(rtc); + err = PTR_ERR(rtc); + goto fail; } - platform_set_drvdata(dev, rtc); + platform_set_drvdata(pdev, rtc); - device_create_file(&dev->dev, &dev_attr_comp_preload); - device_create_file(&dev->dev, &dev_attr_comp_delete); + err = device_create_file(&pdev->dev, &dev_attr_comp_preload); + if (err) + goto fail; + err = device_create_file(&pdev->dev, &dev_attr_comp_delete); + if (err) { + device_remove_file(&pdev->dev, &dev_attr_comp_preload); + goto fail; + } return 0; + +fail: + if (ep93xx_rtc->mmio_base) { + iounmap(ep93xx_rtc->mmio_base); + pdev->dev.platform_data = NULL; + } + release_mem_region(res->start, resource_size(res)); + return err; } -static int __devexit ep93xx_rtc_remove(struct platform_device *dev) +static int __exit ep93xx_rtc_remove(struct platform_device *pdev) { - struct rtc_device *rtc = platform_get_drvdata(dev); + struct rtc_device *rtc = platform_get_drvdata(pdev); + struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data; + struct resource *res; + + /* cleanup sysfs */ + device_remove_file(&pdev->dev, &dev_attr_comp_delete); + device_remove_file(&pdev->dev, &dev_attr_comp_preload); + + rtc_device_unregister(rtc); + + iounmap(ep93xx_rtc->mmio_base); + pdev->dev.platform_data = NULL; - if (rtc) - rtc_device_unregister(rtc); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); - platform_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); return 0; } @@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:ep93xx-rtc"); -static struct platform_driver ep93xx_rtc_platform_driver = { +static struct platform_driver ep93xx_rtc_driver = { .driver = { .name = "ep93xx-rtc", .owner = THIS_MODULE, }, - .probe = ep93xx_rtc_probe, - .remove = __devexit_p(ep93xx_rtc_remove), + .remove = __exit_p(ep93xx_rtc_remove), }; static int __init ep93xx_rtc_init(void) { - return platform_driver_register(&ep93xx_rtc_platform_driver); + return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe); } static void __exit ep93xx_rtc_exit(void) { - platform_driver_unregister(&ep93xx_rtc_platform_driver); + platform_driver_unregister(&ep93xx_rtc_driver); } MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index aaf1f75..457231b 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, struct amba_id *id) goto err_rtc; } - rtc->base = ioremap(dev->res.start, SZ_4K); + rtc->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!rtc->base) { ret = -ENOMEM; goto err_map; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 451fc13..f41873f 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id) goto out; } - ldata->base = ioremap(adev->res.start, - adev->res.end - adev->res.start + 1); + ldata->base = ioremap(adev->res.start, resource_size(&adev->res)); if (!ldata->base) { ret = -ENOMEM; goto out_no_remap; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index cdc049d..58a4879 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, struct amba_id *id) goto out; } - base = ioremap(dev->res.start, PAGE_SIZE); + base = ioremap(dev->res.start, resource_size(&dev->res)); if (!base) { ret = -ENOMEM; goto free; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 88fdac5..bf82e28 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -70,6 +70,23 @@ struct uart_amba_port { struct clk *clk; unsigned int im; /* interrupt mask */ unsigned int old_status; + unsigned int ifls; /* vendor-specific */ +}; + +/* There is by now at least one vendor with differing details, so handle it */ +struct vendor_data { + unsigned int ifls; + unsigned int fifosize; +}; + +static struct vendor_data vendor_arm = { + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fifosize = 16, +}; + +static struct vendor_data vendor_st = { + .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fifosize = 64, }; static void pl011_stop_tx(struct uart_port *port) @@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - uap->port.membase + UART011_IFLS); + writew(uap->ifls, uap->port.membase + UART011_IFLS); /* * Provoke TX FIFO interrupt into asserting. @@ -732,6 +748,7 @@ static struct uart_driver amba_reg = { static int pl011_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; + struct vendor_data *vendor = id->data; void __iomem *base; int i, ret; @@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id) goto out; } - base = ioremap(dev->res.start, PAGE_SIZE); + base = ioremap(dev->res.start, resource_size(&dev->res)); if (!base) { ret = -ENOMEM; goto free; @@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id) goto unmap; } + uap->ifls = vendor->ifls; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; uap->port.iotype = UPIO_MEM; uap->port.irq = dev->irq[0]; - uap->port.fifosize = 16; + uap->port.fifosize = vendor->fifosize; uap->port.ops = &amba_pl011_pops; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = i; @@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = { { .id = 0x00041011, .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + .id = 0x00380802, + .mask = 0x00ffffff, + .data = &vendor_st, }, { 0, 0 }, }; @@ -845,7 +869,11 @@ static void __exit pl011_exit(void) uart_unregister_driver(&amba_reg); } -module_init(pl011_init); +/* + * While this can be a module, if builtin it's most likely the console + * So let's leave module_exit but move module_init to an earlier place + */ +arch_initcall(pl011_init); module_exit(pl011_exit); MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 7b5d1de..285b414 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -71,7 +71,7 @@ #define ONEMS 0xb0 /* One Millisecond register */ #define UTS 0xb4 /* UART Test Register */ #endif -#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) +#ifdef CONFIG_ARCH_MX1 #define BIPR1 0xb0 /* Incremental Preset Register 1 */ #define BIPR2 0xb4 /* Incremental Preset Register 2 */ #define BIPR3 0xb8 /* Incremental Preset Register 3 */ @@ -101,7 +101,7 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) +#ifdef CONFIG_ARCH_MX1 #define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ #endif #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 @@ -132,7 +132,7 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#ifdef CONFIG_ARCH_IMX +#ifdef CONFIG_ARCH_MX1 #define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ #define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ #endif @@ -186,13 +186,6 @@ #define UTS_SOFTRST (1<<0) /* Software reset */ /* We've been assigned a range on the "Low-density serial ports" major */ -#ifdef CONFIG_ARCH_IMX -#define SERIAL_IMX_MAJOR 204 -#define MINOR_START 41 -#define DEV_NAME "ttySMX" -#define MAX_INTERNAL_IRQ IMX_IRQS -#endif - #ifdef CONFIG_ARCH_MXC #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9574947..e8aae22 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -118,7 +118,7 @@ config SPI_GPIO config SPI_IMX tristate "Freescale iMX SPI controller" - depends on ARCH_IMX && EXPERIMENTAL + depends on ARCH_MX1 && EXPERIMENTAL help This enables using the Freescale iMX SPI controller in master mode. @@ -171,6 +171,15 @@ config SPI_ORION help This enables using the SPI master controller on the Orion chips. +config SPI_PL022 + tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)" + depends on ARM_AMBA && EXPERIMENTAL + default y if MACH_U300 + help + This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP + controller. If you have an embedded system with an AMBA(R) + bus and a PL022 controller, say Y or M here. + config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on ARCH_PXA && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5d04519..ecfadb1 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o obj-$(CONFIG_SPI_ORION) += orion_spi.o +obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c new file mode 100644 index 0000000..da76797 --- /dev/null +++ b/drivers/spi/amba-pl022.c @@ -0,0 +1,1866 @@ +/* + * drivers/spi/amba-pl022.c + * + * A driver for the ARM PL022 PrimeCell SSP/SPI bus master. + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * Copyright (C) 2006 STMicroelectronics Pvt. Ltd. + * + * Author: Linus Walleij <linus.walleij@stericsson.com> + * + * Initial version inspired by: + * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c + * Initial adoption to PL022 by: + * Sachin Verma <sachin.verma@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * TODO: + * - add timeout on polled transfers + * - add generic DMA framework support + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl022.h> +#include <linux/io.h> +#include <linux/delay.h> + +/* + * This macro is used to define some register default values. + * reg is masked with mask, the OR:ed with an (again masked) + * val shifted sb steps to the left. + */ +#define SSP_WRITE_BITS(reg, val, mask, sb) \ + ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask)))) + +/* + * This macro is also used to define some default values. + * It will just shift val by sb steps to the left and mask + * the result with mask. + */ +#define GEN_MASK_BITS(val, mask, sb) \ + (((val)<<(sb)) & (mask)) + +#define DRIVE_TX 0 +#define DO_NOT_DRIVE_TX 1 + +#define DO_NOT_QUEUE_DMA 0 +#define QUEUE_DMA 1 + +#define RX_TRANSFER 1 +#define TX_TRANSFER 2 + +/* + * Macros to access SSP Registers with their offsets + */ +#define SSP_CR0(r) (r + 0x000) +#define SSP_CR1(r) (r + 0x004) +#define SSP_DR(r) (r + 0x008) +#define SSP_SR(r) (r + 0x00C) +#define SSP_CPSR(r) (r + 0x010) +#define SSP_IMSC(r) (r + 0x014) +#define SSP_RIS(r) (r + 0x018) +#define SSP_MIS(r) (r + 0x01C) +#define SSP_ICR(r) (r + 0x020) +#define SSP_DMACR(r) (r + 0x024) +#define SSP_ITCR(r) (r + 0x080) +#define SSP_ITIP(r) (r + 0x084) +#define SSP_ITOP(r) (r + 0x088) +#define SSP_TDR(r) (r + 0x08C) + +#define SSP_PID0(r) (r + 0xFE0) +#define SSP_PID1(r) (r + 0xFE4) +#define SSP_PID2(r) (r + 0xFE8) +#define SSP_PID3(r) (r + 0xFEC) + +#define SSP_CID0(r) (r + 0xFF0) +#define SSP_CID1(r) (r + 0xFF4) +#define SSP_CID2(r) (r + 0xFF8) +#define SSP_CID3(r) (r + 0xFFC) + +/* + * SSP Control Register 0 - SSP_CR0 + */ +#define SSP_CR0_MASK_DSS (0x1FUL << 0) +#define SSP_CR0_MASK_HALFDUP (0x1UL << 5) +#define SSP_CR0_MASK_SPO (0x1UL << 6) +#define SSP_CR0_MASK_SPH (0x1UL << 7) +#define SSP_CR0_MASK_SCR (0xFFUL << 8) +#define SSP_CR0_MASK_CSS (0x1FUL << 16) +#define SSP_CR0_MASK_FRF (0x3UL << 21) + +/* + * SSP Control Register 0 - SSP_CR1 + */ +#define SSP_CR1_MASK_LBM (0x1UL << 0) +#define SSP_CR1_MASK_SSE (0x1UL << 1) +#define SSP_CR1_MASK_MS (0x1UL << 2) +#define SSP_CR1_MASK_SOD (0x1UL << 3) +#define SSP_CR1_MASK_RENDN (0x1UL << 4) +#define SSP_CR1_MASK_TENDN (0x1UL << 5) +#define SSP_CR1_MASK_MWAIT (0x1UL << 6) +#define SSP_CR1_MASK_RXIFLSEL (0x7UL << 7) +#define SSP_CR1_MASK_TXIFLSEL (0x7UL << 10) + +/* + * SSP Data Register - SSP_DR + */ +#define SSP_DR_MASK_DATA 0xFFFFFFFF + +/* + * SSP Status Register - SSP_SR + */ +#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */ +#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */ +#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */ +#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */ +#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */ + +/* + * SSP Clock Prescale Register - SSP_CPSR + */ +#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0) + +/* + * SSP Interrupt Mask Set/Clear Register - SSP_IMSC + */ +#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */ +#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */ +#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */ +#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */ + +/* + * SSP Raw Interrupt Status Register - SSP_RIS + */ +/* Receive Overrun Raw Interrupt status */ +#define SSP_RIS_MASK_RORRIS (0x1UL << 0) +/* Receive Timeout Raw Interrupt status */ +#define SSP_RIS_MASK_RTRIS (0x1UL << 1) +/* Receive FIFO Raw Interrupt status */ +#define SSP_RIS_MASK_RXRIS (0x1UL << 2) +/* Transmit FIFO Raw Interrupt status */ +#define SSP_RIS_MASK_TXRIS (0x1UL << 3) + +/* + * SSP Masked Interrupt Status Register - SSP_MIS + */ +/* Receive Overrun Masked Interrupt status */ +#define SSP_MIS_MASK_RORMIS (0x1UL << 0) +/* Receive Timeout Masked Interrupt status */ +#define SSP_MIS_MASK_RTMIS (0x1UL << 1) +/* Receive FIFO Masked Interrupt status */ +#define SSP_MIS_MASK_RXMIS (0x1UL << 2) +/* Transmit FIFO Masked Interrupt status */ +#define SSP_MIS_MASK_TXMIS (0x1UL << 3) + +/* + * SSP Interrupt Clear Register - SSP_ICR + */ +/* Receive Overrun Raw Clear Interrupt bit */ +#define SSP_ICR_MASK_RORIC (0x1UL << 0) +/* Receive Timeout Clear Interrupt bit */ +#define SSP_ICR_MASK_RTIC (0x1UL << 1) + +/* + * SSP DMA Control Register - SSP_DMACR + */ +/* Receive DMA Enable bit */ +#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0) +/* Transmit DMA Enable bit */ +#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) + +/* + * SSP Integration Test control Register - SSP_ITCR + */ +#define SSP_ITCR_MASK_ITEN (0x1UL << 0) +#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1) + +/* + * SSP Integration Test Input Register - SSP_ITIP + */ +#define ITIP_MASK_SSPRXD (0x1UL << 0) +#define ITIP_MASK_SSPFSSIN (0x1UL << 1) +#define ITIP_MASK_SSPCLKIN (0x1UL << 2) +#define ITIP_MASK_RXDMAC (0x1UL << 3) +#define ITIP_MASK_TXDMAC (0x1UL << 4) +#define ITIP_MASK_SSPTXDIN (0x1UL << 5) + +/* + * SSP Integration Test output Register - SSP_ITOP + */ +#define ITOP_MASK_SSPTXD (0x1UL << 0) +#define ITOP_MASK_SSPFSSOUT (0x1UL << 1) +#define ITOP_MASK_SSPCLKOUT (0x1UL << 2) +#define ITOP_MASK_SSPOEn (0x1UL << 3) +#define ITOP_MASK_SSPCTLOEn (0x1UL << 4) +#define ITOP_MASK_RORINTR (0x1UL << 5) +#define ITOP_MASK_RTINTR (0x1UL << 6) +#define ITOP_MASK_RXINTR (0x1UL << 7) +#define ITOP_MASK_TXINTR (0x1UL << 8) +#define ITOP_MASK_INTR (0x1UL << 9) +#define ITOP_MASK_RXDMABREQ (0x1UL << 10) +#define ITOP_MASK_RXDMASREQ (0x1UL << 11) +#define ITOP_MASK_TXDMABREQ (0x1UL << 12) +#define ITOP_MASK_TXDMASREQ (0x1UL << 13) + +/* + * SSP Test Data Register - SSP_TDR + */ +#define TDR_MASK_TESTDATA (0xFFFFFFFF) + +/* + * Message State + * we use the spi_message.state (void *) pointer to + * hold a single state value, that's why all this + * (void *) casting is done here. + */ +#define STATE_START ((void *) 0) +#define STATE_RUNNING ((void *) 1) +#define STATE_DONE ((void *) 2) +#define STATE_ERROR ((void *) -1) + +/* + * Queue State + */ +#define QUEUE_RUNNING (0) +#define QUEUE_STOPPED (1) +/* + * SSP State - Whether Enabled or Disabled + */ +#define SSP_DISABLED (0) +#define SSP_ENABLED (1) + +/* + * SSP DMA State - Whether DMA Enabled or Disabled + */ +#define SSP_DMA_DISABLED (0) +#define SSP_DMA_ENABLED (1) + +/* + * SSP Clock Defaults + */ +#define NMDK_SSP_DEFAULT_CLKRATE 0x2 +#define NMDK_SSP_DEFAULT_PRESCALE 0x40 + +/* + * SSP Clock Parameter ranges + */ +#define CPSDVR_MIN 0x02 +#define CPSDVR_MAX 0xFE +#define SCR_MIN 0x00 +#define SCR_MAX 0xFF + +/* + * SSP Interrupt related Macros + */ +#define DEFAULT_SSP_REG_IMSC 0x0UL +#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC +#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC) + +#define CLEAR_ALL_INTERRUPTS 0x3 + + +/* + * The type of reading going on on this chip + */ +enum ssp_reading { + READING_NULL, + READING_U8, + READING_U16, + READING_U32 +}; + +/** + * The type of writing going on on this chip + */ +enum ssp_writing { + WRITING_NULL, + WRITING_U8, + WRITING_U16, + WRITING_U32 +}; + +/** + * struct vendor_data - vendor-specific config parameters + * for PL022 derivates + * @fifodepth: depth of FIFOs (both) + * @max_bpw: maximum number of bits per word + * @unidir: supports unidirection transfers + */ +struct vendor_data { + int fifodepth; + int max_bpw; + bool unidir; +}; + +/** + * struct pl022 - This is the private SSP driver data structure + * @adev: AMBA device model hookup + * @phybase: The physical memory where the SSP device resides + * @virtbase: The virtual memory where the SSP is mapped + * @master: SPI framework hookup + * @master_info: controller-specific data from machine setup + * @regs: SSP controller register's virtual address + * @pump_messages: Work struct for scheduling work to the workqueue + * @lock: spinlock to syncronise access to driver data + * @workqueue: a workqueue on which any spi_message request is queued + * @busy: workqueue is busy + * @run: workqueue is running + * @pump_transfers: Tasklet used in Interrupt Transfer mode + * @cur_msg: Pointer to current spi_message being processed + * @cur_transfer: Pointer to current spi_transfer + * @cur_chip: pointer to current clients chip(assigned from controller_state) + * @tx: current position in TX buffer to be read + * @tx_end: end position in TX buffer to be read + * @rx: current position in RX buffer to be written + * @rx_end: end position in RX buffer to be written + * @readingtype: the type of read currently going on + * @writingtype: the type or write currently going on + */ +struct pl022 { + struct amba_device *adev; + struct vendor_data *vendor; + resource_size_t phybase; + void __iomem *virtbase; + struct clk *clk; + struct spi_master *master; + struct pl022_ssp_controller *master_info; + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t queue_lock; + struct list_head queue; + int busy; + int run; + /* Message transfer pump */ + struct tasklet_struct pump_transfers; + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + enum ssp_reading read; + enum ssp_writing write; +}; + +/** + * struct chip_data - To maintain runtime state of SSP for each client chip + * @cr0: Value of control register CR0 of SSP + * @cr1: Value of control register CR1 of SSP + * @dmacr: Value of DMA control Register of SSP + * @cpsr: Value of Clock prescale register + * @n_bytes: how many bytes(power of 2) reqd for a given data width of client + * @enable_dma: Whether to enable DMA or not + * @write: function ptr to be used to write when doing xfer for this chip + * @read: function ptr to be used to read when doing xfer for this chip + * @cs_control: chip select callback provided by chip + * @xfer_type: polling/interrupt/DMA + * + * Runtime state of the SSP controller, maintained per chip, + * This would be set according to the current message that would be served + */ +struct chip_data { + u16 cr0; + u16 cr1; + u16 dmacr; + u16 cpsr; + u8 n_bytes; + u8 enable_dma:1; + enum ssp_reading read; + enum ssp_writing write; + void (*cs_control) (u32 command); + int xfer_type; +}; + +/** + * null_cs_control - Dummy chip select function + * @command: select/delect the chip + * + * If no chip select function is provided by client this is used as dummy + * chip select + */ +static void null_cs_control(u32 command) +{ + pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); +} + +/** + * giveback - current spi_message is over, schedule next message and call + * callback of this message. Assumes that caller already + * set message->status; dma and pio irqs are blocked + * @pl022: SSP driver private data structure + */ +static void giveback(struct pl022 *pl022) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + void (*curr_cs_control) (u32 command); + + /* + * This local reference to the chip select function + * is needed because we set curr_chip to NULL + * as a step toward termininating the message. + */ + curr_cs_control = pl022->cur_chip->cs_control; + spin_lock_irqsave(&pl022->queue_lock, flags); + msg = pl022->cur_msg; + pl022->cur_msg = NULL; + pl022->cur_transfer = NULL; + pl022->cur_chip = NULL; + queue_work(pl022->workqueue, &pl022->pump_messages); + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + /* Delay if requested before any change in chip select */ + if (last_transfer->delay_usecs) + /* + * FIXME: This runs in interrupt context. + * Is this really smart? + */ + udelay(last_transfer->delay_usecs); + + /* + * Drop chip select UNLESS cs_change is true or we are returning + * a message with an error, or next message is for another chip + */ + if (!last_transfer->cs_change) + curr_cs_control(SSP_CHIP_DESELECT); + else { + struct spi_message *next_msg; + + /* Holding of cs was hinted, but we need to make sure + * the next message is for the same chip. Don't waste + * time with the following tests unless this was hinted. + * + * We cannot postpone this until pump_messages, because + * after calling msg->complete (below) the driver that + * sent the current message could be unloaded, which + * could invalidate the cs_control() callback... + */ + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&pl022->queue_lock, flags); + if (list_empty(&pl022->queue)) + next_msg = NULL; + else + next_msg = list_entry(pl022->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + /* see if the next and current messages point + * to the same chip + */ + if (next_msg && next_msg->spi != msg->spi) + next_msg = NULL; + if (!next_msg || msg->state == STATE_ERROR) + curr_cs_control(SSP_CHIP_DESELECT); + } + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); + /* This message is completed, so let's turn off the clock! */ + clk_disable(pl022->clk); +} + +/** + * flush - flush the FIFO to reach a clean state + * @pl022: SSP driver private data structure + */ +static int flush(struct pl022 *pl022) +{ + unsigned long limit = loops_per_jiffy << 1; + + dev_dbg(&pl022->adev->dev, "flush\n"); + do { + while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + readw(SSP_DR(pl022->virtbase)); + } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--); + return limit; +} + +/** + * restore_state - Load configuration of current chip + * @pl022: SSP driver private data structure + */ +static void restore_state(struct pl022 *pl022) +{ + struct chip_data *chip = pl022->cur_chip; + + writew(chip->cr0, SSP_CR0(pl022->virtbase)); + writew(chip->cr1, SSP_CR1(pl022->virtbase)); + writew(chip->dmacr, SSP_DMACR(pl022->virtbase)); + writew(chip->cpsr, SSP_CPSR(pl022->virtbase)); + writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); +} + +/** + * load_ssp_default_config - Load default configuration for SSP + * @pl022: SSP driver private data structure + */ + +/* + * Default SSP Register Values + */ +#define DEFAULT_SSP_REG_CR0 ( \ + GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ + GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \ + GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ + GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \ + GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ + GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \ + GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \ +) + +#define DEFAULT_SSP_REG_CR1 ( \ + GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \ + GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ + GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ + GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \ + GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \ + GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \ + GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\ + GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \ + GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \ +) + +#define DEFAULT_SSP_REG_CPSR ( \ + GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \ +) + +#define DEFAULT_SSP_REG_DMACR (\ + GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \ + GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \ +) + + +static void load_ssp_default_config(struct pl022 *pl022) +{ + writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase)); + writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase)); + writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase)); + writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); +} + +/** + * This will write to TX and read from RX according to the parameters + * set in pl022. + */ +static void readwriter(struct pl022 *pl022) +{ + + /* + * The FIFO depth is different inbetween primecell variants. + * I believe filling in too much in the FIFO might cause + * errons in 8bit wide transfers on ARM variants (just 8 words + * FIFO, means only 8x8 = 64 bits in FIFO) at least. + * + * FIXME: currently we have no logic to account for this. + * perhaps there is even something broken in HW regarding + * 8bit transfers (it doesn't fail on 16bit) so this needs + * more investigation... + */ + dev_dbg(&pl022->adev->dev, + "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n", + __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end); + + /* Read as much as you can */ + while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + && (pl022->rx < pl022->rx_end)) { + switch (pl022->read) { + case READING_NULL: + readw(SSP_DR(pl022->virtbase)); + break; + case READING_U8: + *(u8 *) (pl022->rx) = + readw(SSP_DR(pl022->virtbase)) & 0xFFU; + break; + case READING_U16: + *(u16 *) (pl022->rx) = + (u16) readw(SSP_DR(pl022->virtbase)); + break; + case READING_U32: + *(u32 *) (pl022->rx) = + readl(SSP_DR(pl022->virtbase)); + break; + } + pl022->rx += (pl022->cur_chip->n_bytes); + } + /* + * Write as much as you can, while keeping an eye on the RX FIFO! + */ + while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) + && (pl022->tx < pl022->tx_end)) { + switch (pl022->write) { + case WRITING_NULL: + writew(0x0, SSP_DR(pl022->virtbase)); + break; + case WRITING_U8: + writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase)); + break; + case WRITING_U16: + writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase)); + break; + case WRITING_U32: + writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase)); + break; + } + pl022->tx += (pl022->cur_chip->n_bytes); + /* + * This inner reader takes care of things appearing in the RX + * FIFO as we're transmitting. This will happen a lot since the + * clock starts running when you put things into the TX FIFO, + * and then things are continously clocked into the RX FIFO. + */ + while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) + && (pl022->rx < pl022->rx_end)) { + switch (pl022->read) { + case READING_NULL: + readw(SSP_DR(pl022->virtbase)); + break; + case READING_U8: + *(u8 *) (pl022->rx) = + readw(SSP_DR(pl022->virtbase)) & 0xFFU; + break; + case READING_U16: + *(u16 *) (pl022->rx) = + (u16) readw(SSP_DR(pl022->virtbase)); + break; + case READING_U32: + *(u32 *) (pl022->rx) = + readl(SSP_DR(pl022->virtbase)); + break; + } + pl022->rx += (pl022->cur_chip->n_bytes); + } + } + /* + * When we exit here the TX FIFO should be full and the RX FIFO + * should be empty + */ +} + + +/** + * next_transfer - Move to the Next transfer in the current spi message + * @pl022: SSP driver private data structure + * + * This function moves though the linked list of spi transfers in the + * current spi message and returns with the state of current spi + * message i.e whether its last transfer is done(STATE_DONE) or + * Next transfer is ready(STATE_RUNNING) + */ +static void *next_transfer(struct pl022 *pl022) +{ + struct spi_message *msg = pl022->cur_msg; + struct spi_transfer *trans = pl022->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + pl022->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, transfer_list); + return STATE_RUNNING; + } + return STATE_DONE; +} +/** + * pl022_interrupt_handler - Interrupt handler for SSP controller + * + * This function handles interrupts generated for an interrupt based transfer. + * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the + * current message's state as STATE_ERROR and schedule the tasklet + * pump_transfers which will do the postprocessing of the current message by + * calling giveback(). Otherwise it reads data from RX FIFO till there is no + * more data, and writes data in TX FIFO till it is not full. If we complete + * the transfer we move to the next transfer and schedule the tasklet. + */ +static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) +{ + struct pl022 *pl022 = dev_id; + struct spi_message *msg = pl022->cur_msg; + u16 irq_status = 0; + u16 flag = 0; + + if (unlikely(!msg)) { + dev_err(&pl022->adev->dev, + "bad message state in interrupt handler"); + /* Never fail */ + return IRQ_HANDLED; + } + + /* Read the Interrupt Status Register */ + irq_status = readw(SSP_MIS(pl022->virtbase)); + + if (unlikely(!irq_status)) + return IRQ_NONE; + + /* This handles the error code interrupts */ + if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { + /* + * Overrun interrupt - bail out since our Data has been + * corrupted + */ + dev_err(&pl022->adev->dev, + "FIFO overrun\n"); + if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) + dev_err(&pl022->adev->dev, + "RXFIFO is full\n"); + if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) + dev_err(&pl022->adev->dev, + "TXFIFO is full\n"); + + /* + * Disable and clear interrupts, disable SSP, + * mark message with bad status so it can be + * retried. + */ + writew(DISABLE_ALL_INTERRUPTS, + SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); + writew((readw(SSP_CR1(pl022->virtbase)) & + (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); + msg->state = STATE_ERROR; + + /* Schedule message queue handler */ + tasklet_schedule(&pl022->pump_transfers); + return IRQ_HANDLED; + } + + readwriter(pl022); + + if ((pl022->tx == pl022->tx_end) && (flag == 0)) { + flag = 1; + /* Disable Transmit interrupt */ + writew(readw(SSP_IMSC(pl022->virtbase)) & + (~SSP_IMSC_MASK_TXIM), + SSP_IMSC(pl022->virtbase)); + } + + /* + * Since all transactions must write as much as shall be read, + * we can conclude the entire transaction once RX is complete. + * At this point, all TX will always be finished. + */ + if (pl022->rx >= pl022->rx_end) { + writew(DISABLE_ALL_INTERRUPTS, + SSP_IMSC(pl022->virtbase)); + writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); + if (unlikely(pl022->rx > pl022->rx_end)) { + dev_warn(&pl022->adev->dev, "read %u surplus " + "bytes (did you request an odd " + "number of bytes on a 16bit bus?)\n", + (u32) (pl022->rx - pl022->rx_end)); + } + /* Update total bytes transfered */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); + return IRQ_HANDLED; + } + + return IRQ_HANDLED; +} + +/** + * This sets up the pointers to memory for the next message to + * send out on the SPI bus. + */ +static int set_up_next_transfer(struct pl022 *pl022, + struct spi_transfer *transfer) +{ + int residue; + + /* Sanity check the message for this bus width */ + residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes; + if (unlikely(residue != 0)) { + dev_err(&pl022->adev->dev, + "message of %u bytes to transmit but the current " + "chip bus has a data width of %u bytes!\n", + pl022->cur_transfer->len, + pl022->cur_chip->n_bytes); + dev_err(&pl022->adev->dev, "skipping this message\n"); + return -EIO; + } + pl022->tx = (void *)transfer->tx_buf; + pl022->tx_end = pl022->tx + pl022->cur_transfer->len; + pl022->rx = (void *)transfer->rx_buf; + pl022->rx_end = pl022->rx + pl022->cur_transfer->len; + pl022->write = + pl022->tx ? pl022->cur_chip->write : WRITING_NULL; + pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL; + return 0; +} + +/** + * pump_transfers - Tasklet function which schedules next interrupt transfer + * when running in interrupt transfer mode. + * @data: SSP driver private data structure + * + */ +static void pump_transfers(unsigned long data) +{ + struct pl022 *pl022 = (struct pl022 *) data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + + /* Get current state information */ + message = pl022->cur_msg; + transfer = pl022->cur_transfer; + + /* Handle for abort */ + if (message->state == STATE_ERROR) { + message->status = -EIO; + giveback(pl022); + return; + } + + /* Handle end of message */ + if (message->state == STATE_DONE) { + message->status = 0; + giveback(pl022); + return; + } + + /* Delay if requested at end of transfer before CS change */ + if (message->state == STATE_RUNNING) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + /* + * FIXME: This runs in interrupt context. + * Is this really smart? + */ + udelay(previous->delay_usecs); + + /* Drop chip select only if cs_change is requested */ + if (previous->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } else { + /* STATE_START */ + message->state = STATE_RUNNING; + } + + if (set_up_next_transfer(pl022, transfer)) { + message->state = STATE_ERROR; + message->status = -EIO; + giveback(pl022); + return; + } + /* Flush the FIFOs and let's go! */ + flush(pl022); + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); +} + +/** + * NOT IMPLEMENTED + * configure_dma - It configures the DMA pipes for DMA transfers + * @data: SSP driver's private data structure + * + */ +static int configure_dma(void *data) +{ + struct pl022 *pl022 = data; + dev_dbg(&pl022->adev->dev, "configure DMA\n"); + return -ENOTSUPP; +} + +/** + * do_dma_transfer - It handles transfers of the current message + * if it is DMA xfer. + * NOT FULLY IMPLEMENTED + * @data: SSP driver's private data structure + */ +static void do_dma_transfer(void *data) +{ + struct pl022 *pl022 = data; + + if (configure_dma(data)) { + dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n"); + goto err_config_dma; + } + + /* TODO: Implememt DMA setup of pipes here */ + + /* Enable target chip, set up transfer */ + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + if (set_up_next_transfer(pl022, pl022->cur_transfer)) { + /* Error path */ + pl022->cur_msg->state = STATE_ERROR; + pl022->cur_msg->status = -EIO; + giveback(pl022); + return; + } + /* Enable SSP */ + writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), + SSP_CR1(pl022->virtbase)); + + /* TODO: Enable the DMA transfer here */ + return; + + err_config_dma: + pl022->cur_msg->state = STATE_ERROR; + pl022->cur_msg->status = -EIO; + giveback(pl022); + return; +} + +static void do_interrupt_transfer(void *data) +{ + struct pl022 *pl022 = data; + + /* Enable target chip */ + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + if (set_up_next_transfer(pl022, pl022->cur_transfer)) { + /* Error path */ + pl022->cur_msg->state = STATE_ERROR; + pl022->cur_msg->status = -EIO; + giveback(pl022); + return; + } + /* Enable SSP, turn on interrupts */ + writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), + SSP_CR1(pl022->virtbase)); + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); +} + +static void do_polling_transfer(void *data) +{ + struct pl022 *pl022 = data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct chip_data *chip; + + chip = pl022->cur_chip; + message = pl022->cur_msg; + + while (message->state != STATE_DONE) { + /* Handle for abort */ + if (message->state == STATE_ERROR) + break; + transfer = pl022->cur_transfer; + + /* Delay if requested at end of transfer */ + if (message->state == STATE_RUNNING) { + previous = + list_entry(transfer->transfer_list.prev, + struct spi_transfer, transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + if (previous->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } else { + /* STATE_START */ + message->state = STATE_RUNNING; + pl022->cur_chip->cs_control(SSP_CHIP_SELECT); + } + + /* Configuration Changing Per Transfer */ + if (set_up_next_transfer(pl022, transfer)) { + /* Error path */ + message->state = STATE_ERROR; + break; + } + /* Flush FIFOs and enable SSP */ + flush(pl022); + writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), + SSP_CR1(pl022->virtbase)); + + dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n"); + /* FIXME: insert a timeout so we don't hang here indefinately */ + while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) + readwriter(pl022); + + /* Update total byte transfered */ + message->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip->cs_control(SSP_CHIP_DESELECT); + /* Move to next transfer */ + message->state = next_transfer(pl022); + } + + /* Handle end of message */ + if (message->state == STATE_DONE) + message->status = 0; + else + message->status = -EIO; + + giveback(pl022); + return; +} + +/** + * pump_messages - Workqueue function which processes spi message queue + * @data: pointer to private data of SSP driver + * + * This function checks if there is any spi message in the queue that + * needs processing and delegate control to appropriate function + * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer() + * based on the kind of the transfer + * + */ +static void pump_messages(struct work_struct *work) +{ + struct pl022 *pl022 = + container_of(work, struct pl022, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&pl022->queue_lock, flags); + if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) { + pl022->busy = 0; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return; + } + /* Make sure we are not already running a message */ + if (pl022->cur_msg) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return; + } + /* Extract head of queue */ + pl022->cur_msg = + list_entry(pl022->queue.next, struct spi_message, queue); + + list_del_init(&pl022->cur_msg->queue); + pl022->busy = 1; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + /* Initial message state */ + pl022->cur_msg->state = STATE_START; + pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + + /* Setup the SPI using the per chip configuration */ + pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi); + /* + * We enable the clock here, then the clock will be disabled when + * giveback() is called in each method (poll/interrupt/DMA) + */ + clk_enable(pl022->clk); + restore_state(pl022); + flush(pl022); + + if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) + do_polling_transfer(pl022); + else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER) + do_interrupt_transfer(pl022); + else + do_dma_transfer(pl022); +} + + +static int __init init_queue(struct pl022 *pl022) +{ + INIT_LIST_HEAD(&pl022->queue); + spin_lock_init(&pl022->queue_lock); + + pl022->run = QUEUE_STOPPED; + pl022->busy = 0; + + tasklet_init(&pl022->pump_transfers, + pump_transfers, (unsigned long)pl022); + + INIT_WORK(&pl022->pump_messages, pump_messages); + pl022->workqueue = create_singlethread_workqueue( + dev_name(pl022->master->dev.parent)); + if (pl022->workqueue == NULL) + return -EBUSY; + + return 0; +} + + +static int start_queue(struct pl022 *pl022) +{ + unsigned long flags; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + if (pl022->run == QUEUE_RUNNING || pl022->busy) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return -EBUSY; + } + + pl022->run = QUEUE_RUNNING; + pl022->cur_msg = NULL; + pl022->cur_transfer = NULL; + pl022->cur_chip = NULL; + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + queue_work(pl022->workqueue, &pl022->pump_messages); + + return 0; +} + + +static int stop_queue(struct pl022 *pl022) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + /* This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the pl022->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead */ + pl022->run = QUEUE_STOPPED; + while (!list_empty(&pl022->queue) && pl022->busy && limit--) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + msleep(10); + spin_lock_irqsave(&pl022->queue_lock, flags); + } + + if (!list_empty(&pl022->queue) || pl022->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&pl022->queue_lock, flags); + + return status; +} + +static int destroy_queue(struct pl022 *pl022) +{ + int status; + + status = stop_queue(pl022); + /* we are unloading the module or failing to load (only two calls + * to this routine), and neither call can handle a return value. + * However, destroy_workqueue calls flush_workqueue, and that will + * block until all work is done. If the reason that stop_queue + * timed out is that the work will never finish, then it does no + * good to call destroy_workqueue, so return anyway. */ + if (status != 0) + return status; + + destroy_workqueue(pl022->workqueue); + + return 0; +} + +static int verify_controller_parameters(struct pl022 *pl022, + struct pl022_config_chip *chip_info) +{ + if ((chip_info->lbm != LOOPBACK_ENABLED) + && (chip_info->lbm != LOOPBACK_DISABLED)) { + dev_err(chip_info->dev, + "loopback Mode is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) + || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { + dev_err(chip_info->dev, + "interface is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && + (!pl022->vendor->unidir)) { + dev_err(chip_info->dev, + "unidirectional mode not supported in this " + "hardware version\n"); + return -EINVAL; + } + if ((chip_info->hierarchy != SSP_MASTER) + && (chip_info->hierarchy != SSP_SLAVE)) { + dev_err(chip_info->dev, + "hierarchy is configured incorrectly\n"); + return -EINVAL; + } + if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) + || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { + dev_err(chip_info->dev, + "cpsdvsr is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->endian_rx != SSP_RX_MSB) + && (chip_info->endian_rx != SSP_RX_LSB)) { + dev_err(chip_info->dev, + "RX FIFO endianess is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->endian_tx != SSP_TX_MSB) + && (chip_info->endian_tx != SSP_TX_LSB)) { + dev_err(chip_info->dev, + "TX FIFO endianess is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->data_size < SSP_DATA_BITS_4) + || (chip_info->data_size > SSP_DATA_BITS_32)) { + dev_err(chip_info->dev, + "DATA Size is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->com_mode != INTERRUPT_TRANSFER) + && (chip_info->com_mode != DMA_TRANSFER) + && (chip_info->com_mode != POLLING_TRANSFER)) { + dev_err(chip_info->dev, + "Communication mode is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) + || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { + dev_err(chip_info->dev, + "RX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) + || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { + dev_err(chip_info->dev, + "TX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { + if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE) + && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) { + dev_err(chip_info->dev, + "Clock Phase is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW) + && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) { + dev_err(chip_info->dev, + "Clock Polarity is configured incorrectly\n"); + return -EINVAL; + } + } + if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { + if ((chip_info->ctrl_len < SSP_BITS_4) + || (chip_info->ctrl_len > SSP_BITS_32)) { + dev_err(chip_info->dev, + "CTRL LEN is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) + && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { + dev_err(chip_info->dev, + "Wait State is configured incorrectly\n"); + return -EINVAL; + } + if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) + && (chip_info->duplex != + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { + dev_err(chip_info->dev, + "DUPLEX is configured incorrectly\n"); + return -EINVAL; + } + } + if (chip_info->cs_control == NULL) { + dev_warn(chip_info->dev, + "Chip Select Function is NULL for this chip\n"); + chip_info->cs_control = null_cs_control; + } + return 0; +} + +/** + * pl022_transfer - transfer function registered to SPI master framework + * @spi: spi device which is requesting transfer + * @msg: spi message which is to handled is queued to driver queue + * + * This function is registered to the SPI framework for this SPI master + * controller. It will queue the spi_message in the queue of driver if + * the queue is not stopped and return. + */ +static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct pl022 *pl022 = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&pl022->queue_lock, flags); + + if (pl022->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return -ESHUTDOWN; + } + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = STATE_START; + + list_add_tail(&msg->queue, &pl022->queue); + if (pl022->run == QUEUE_RUNNING && !pl022->busy) + queue_work(pl022->workqueue, &pl022->pump_messages); + + spin_unlock_irqrestore(&pl022->queue_lock, flags); + return 0; +} + +static int calculate_effective_freq(struct pl022 *pl022, + int freq, + struct ssp_clock_params *clk_freq) +{ + /* Lets calculate the frequency parameters */ + u16 cpsdvsr = 2; + u16 scr = 0; + bool freq_found = false; + u32 rate; + u32 max_tclk; + u32 min_tclk; + + rate = clk_get_rate(pl022->clk); + /* cpsdvscr = 2 & scr 0 */ + max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN))); + /* cpsdvsr = 254 & scr = 255 */ + min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX))); + + if ((freq <= max_tclk) && (freq >= min_tclk)) { + while (cpsdvsr <= CPSDVR_MAX && !freq_found) { + while (scr <= SCR_MAX && !freq_found) { + if ((rate / + (cpsdvsr * (1 + scr))) > freq) + scr += 1; + else { + /* + * This bool is made true when + * effective frequency >= + * target frequency is found + */ + freq_found = true; + if ((rate / + (cpsdvsr * (1 + scr))) != freq) { + if (scr == SCR_MIN) { + cpsdvsr -= 2; + scr = SCR_MAX; + } else + scr -= 1; + } + } + } + if (!freq_found) { + cpsdvsr += 2; + scr = SCR_MIN; + } + } + if (cpsdvsr != 0) { + dev_dbg(&pl022->adev->dev, + "SSP Effective Frequency is %u\n", + (rate / (cpsdvsr * (1 + scr)))); + clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF); + clk_freq->scr = (u8) (scr & 0xFF); + dev_dbg(&pl022->adev->dev, + "SSP cpsdvsr = %d, scr = %d\n", + clk_freq->cpsdvsr, clk_freq->scr); + } + } else { + dev_err(&pl022->adev->dev, + "controller data is incorrect: out of range frequency"); + return -EINVAL; + } + return 0; +} + +/** + * NOT IMPLEMENTED + * process_dma_info - Processes the DMA info provided by client drivers + * @chip_info: chip info provided by client device + * @chip: Runtime state maintained by the SSP controller for each spi device + * + * This function processes and stores DMA config provided by client driver + * into the runtime state maintained by the SSP controller driver + */ +static int process_dma_info(struct pl022_config_chip *chip_info, + struct chip_data *chip) +{ + dev_err(chip_info->dev, + "cannot process DMA info, DMA not implemented!\n"); + return -ENOTSUPP; +} + +/** + * pl022_setup - setup function registered to SPI master framework + * @spi: spi device which is requesting setup + * + * This function is registered to the SPI framework for this SPI master + * controller. If it is the first time when setup is called by this device, + * this function will initialize the runtime state for this chip and save + * the same in the device structure. Else it will update the runtime info + * with the updated chip info. Nothing is really being written to the + * controller hardware here, that is not done until the actual transfer + * commence. + */ + +/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */ +#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ + | SPI_LSB_FIRST | SPI_LOOP) + +static int pl022_setup(struct spi_device *spi) +{ + struct pl022_config_chip *chip_info; + struct chip_data *chip; + int status = 0; + struct pl022 *pl022 = spi_master_get_devdata(spi->master); + + if (spi->mode & ~MODEBITS) { + dev_dbg(&spi->dev, "unsupported mode bits %x\n", + spi->mode & ~MODEBITS); + return -EINVAL; + } + + if (!spi->max_speed_hz) + return -EINVAL; + + /* Get controller_state if one is supplied */ + chip = spi_get_ctldata(spi); + + if (chip == NULL) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, + "cannot allocate controller state\n"); + return -ENOMEM; + } + dev_dbg(&spi->dev, + "allocated memory for controller's runtime state\n"); + } + + /* Get controller data if one is supplied */ + chip_info = spi->controller_data; + + if (chip_info == NULL) { + /* spi_board_info.controller_data not is supplied */ + dev_dbg(&spi->dev, + "using default controller_data settings\n"); + + chip_info = + kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL); + + if (!chip_info) { + dev_err(&spi->dev, + "cannot allocate controller data\n"); + status = -ENOMEM; + goto err_first_setup; + } + + dev_dbg(&spi->dev, "allocated memory for controller data\n"); + + /* Pointer back to the SPI device */ + chip_info->dev = &spi->dev; + /* + * Set controller data default values: + * Polling is supported by default + */ + chip_info->lbm = LOOPBACK_DISABLED; + chip_info->com_mode = POLLING_TRANSFER; + chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; + chip_info->hierarchy = SSP_SLAVE; + chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; + chip_info->endian_tx = SSP_TX_LSB; + chip_info->endian_rx = SSP_RX_LSB; + chip_info->data_size = SSP_DATA_BITS_12; + chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; + chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; + chip_info->clk_phase = SSP_CLK_FALLING_EDGE; + chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; + chip_info->ctrl_len = SSP_BITS_8; + chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; + chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; + chip_info->cs_control = null_cs_control; + } else { + dev_dbg(&spi->dev, + "using user supplied controller_data settings\n"); + } + + /* + * We can override with custom divisors, else we use the board + * frequency setting + */ + if ((0 == chip_info->clk_freq.cpsdvsr) + && (0 == chip_info->clk_freq.scr)) { + status = calculate_effective_freq(pl022, + spi->max_speed_hz, + &chip_info->clk_freq); + if (status < 0) + goto err_config_params; + } else { + if ((chip_info->clk_freq.cpsdvsr % 2) != 0) + chip_info->clk_freq.cpsdvsr = + chip_info->clk_freq.cpsdvsr - 1; + } + status = verify_controller_parameters(pl022, chip_info); + if (status) { + dev_err(&spi->dev, "controller data is incorrect"); + goto err_config_params; + } + /* Now set controller state based on controller data */ + chip->xfer_type = chip_info->com_mode; + chip->cs_control = chip_info->cs_control; + + if (chip_info->data_size <= 8) { + dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n"); + chip->n_bytes = 1; + chip->read = READING_U8; + chip->write = WRITING_U8; + } else if (chip_info->data_size <= 16) { + dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); + chip->n_bytes = 2; + chip->read = READING_U16; + chip->write = WRITING_U16; + } else { + if (pl022->vendor->max_bpw >= 32) { + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; + } else { + dev_err(&spi->dev, + "illegal data size for this controller!\n"); + dev_err(&spi->dev, + "a standard pl022 can only handle " + "1 <= n <= 16 bit words\n"); + goto err_config_params; + } + } + + /* Now Initialize all register settings required for this chip */ + chip->cr0 = 0; + chip->cr1 = 0; + chip->dmacr = 0; + chip->cpsr = 0; + if ((chip_info->com_mode == DMA_TRANSFER) + && ((pl022->master_info)->enable_dma)) { + chip->enable_dma = 1; + dev_dbg(&spi->dev, "DMA mode set in controller state\n"); + status = process_dma_info(chip_info, chip); + if (status < 0) + goto err_config_params; + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, + SSP_DMACR_MASK_RXDMAE, 0); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, + SSP_DMACR_MASK_TXDMAE, 1); + } else { + chip->enable_dma = 0; + dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, + SSP_DMACR_MASK_RXDMAE, 0); + SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, + SSP_DMACR_MASK_TXDMAE, 1); + } + + chip->cpsr = chip_info->clk_freq.cpsdvsr; + + SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0); + SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5); + SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6); + SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7); + SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); + SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16); + SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21); + SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0); + SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); + SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); + SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); + SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4); + SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5); + SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6); + SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7); + SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10); + + /* Save controller_state */ + spi_set_ctldata(spi, chip); + return status; + err_config_params: + err_first_setup: + kfree(chip); + return status; +} + +/** + * pl022_cleanup - cleanup function registered to SPI master framework + * @spi: spi device which is requesting cleanup + * + * This function is registered to the SPI framework for this SPI master + * controller. It will free the runtime state of chip. + */ +static void pl022_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + + spi_set_ctldata(spi, NULL); + kfree(chip); +} + + +static int __init +pl022_probe(struct amba_device *adev, struct amba_id *id) +{ + struct device *dev = &adev->dev; + struct pl022_ssp_controller *platform_info = adev->dev.platform_data; + struct spi_master *master; + struct pl022 *pl022 = NULL; /*Data for this driver */ + int status = 0; + + dev_info(&adev->dev, + "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid); + if (platform_info == NULL) { + dev_err(&adev->dev, "probe - no platform data supplied\n"); + status = -ENODEV; + goto err_no_pdata; + } + + /* Allocate master with space for data */ + master = spi_alloc_master(dev, sizeof(struct pl022)); + if (master == NULL) { + dev_err(&adev->dev, "probe - cannot alloc SPI master\n"); + status = -ENOMEM; + goto err_no_master; + } + + pl022 = spi_master_get_devdata(master); + pl022->master = master; + pl022->master_info = platform_info; + pl022->adev = adev; + pl022->vendor = id->data; + + /* + * Bus Number Which has been Assigned to this SSP controller + * on this board + */ + master->bus_num = platform_info->bus_id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = pl022_cleanup; + master->setup = pl022_setup; + master->transfer = pl022_transfer; + + dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); + + status = amba_request_regions(adev, NULL); + if (status) + goto err_no_ioregion; + + pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); + if (pl022->virtbase == NULL) { + status = -ENOMEM; + goto err_no_ioremap; + } + printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", + adev->res.start, pl022->virtbase); + + pl022->clk = clk_get(&adev->dev, NULL); + if (IS_ERR(pl022->clk)) { + status = PTR_ERR(pl022->clk); + dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n"); + goto err_no_clk; + } + + /* Disable SSP */ + clk_enable(pl022->clk); + writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), + SSP_CR1(pl022->virtbase)); + load_ssp_default_config(pl022); + clk_disable(pl022->clk); + + status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022", + pl022); + if (status < 0) { + dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); + goto err_no_irq; + } + /* Initialize and start queue */ + status = init_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, "probe - problem initializing queue\n"); + goto err_init_queue; + } + status = start_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, "probe - problem starting queue\n"); + goto err_start_queue; + } + /* Register with the SPI framework */ + amba_set_drvdata(adev, pl022); + status = spi_register_master(master); + if (status != 0) { + dev_err(&adev->dev, + "probe - problem registering spi master\n"); + goto err_spi_register; + } + dev_dbg(dev, "probe succeded\n"); + return 0; + + err_spi_register: + err_start_queue: + err_init_queue: + destroy_queue(pl022); + free_irq(adev->irq[0], pl022); + err_no_irq: + clk_put(pl022->clk); + err_no_clk: + iounmap(pl022->virtbase); + err_no_ioremap: + amba_release_regions(adev); + err_no_ioregion: + spi_master_put(master); + err_no_master: + err_no_pdata: + return status; +} + +static int __exit +pl022_remove(struct amba_device *adev) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + if (!pl022) + return 0; + + /* Remove the queue */ + status = destroy_queue(pl022); + if (status != 0) { + dev_err(&adev->dev, + "queue remove failed (%d)\n", status); + return status; + } + load_ssp_default_config(pl022); + free_irq(adev->irq[0], pl022); + clk_disable(pl022->clk); + clk_put(pl022->clk); + iounmap(pl022->virtbase); + amba_release_regions(adev); + tasklet_disable(&pl022->pump_transfers); + spi_unregister_master(pl022->master); + spi_master_put(pl022->master); + amba_set_drvdata(adev, NULL); + dev_dbg(&adev->dev, "remove succeded\n"); + return 0; +} + +#ifdef CONFIG_PM +static int pl022_suspend(struct amba_device *adev, pm_message_t state) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + + status = stop_queue(pl022); + if (status) { + dev_warn(&adev->dev, "suspend cannot stop queue\n"); + return status; + } + + clk_enable(pl022->clk); + load_ssp_default_config(pl022); + clk_disable(pl022->clk); + dev_dbg(&adev->dev, "suspended\n"); + return 0; +} + +static int pl022_resume(struct amba_device *adev) +{ + struct pl022 *pl022 = amba_get_drvdata(adev); + int status = 0; + + /* Start the queue running */ + status = start_queue(pl022); + if (status) + dev_err(&adev->dev, "problem starting queue (%d)\n", status); + else + dev_dbg(&adev->dev, "resumed\n"); + + return status; +} +#else +#define pl022_suspend NULL +#define pl022_resume NULL +#endif /* CONFIG_PM */ + +static struct vendor_data vendor_arm = { + .fifodepth = 8, + .max_bpw = 16, + .unidir = false, +}; + + +static struct vendor_data vendor_st = { + .fifodepth = 32, + .max_bpw = 32, + .unidir = false, +}; + +static struct amba_id pl022_ids[] = { + { + /* + * ARM PL022 variant, this has a 16bit wide + * and 8 locations deep TX/RX FIFO + */ + .id = 0x00041022, + .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + /* + * ST Micro derivative, this has 32bit wide + * and 32 locations deep TX/RX FIFO + */ + .id = 0x00108022, + .mask = 0xffffffff, + .data = &vendor_st, + }, + { 0, 0 }, +}; + +static struct amba_driver pl022_driver = { + .drv = { + .name = "ssp-pl022", + }, + .id_table = pl022_ids, + .probe = pl022_probe, + .remove = __exit_p(pl022_remove), + .suspend = pl022_suspend, + .resume = pl022_resume, +}; + + +static int __init pl022_init(void) +{ + return amba_driver_register(&pl022_driver); +} + +module_init(pl022_init); + +static void __exit pl022_exit(void) +{ + amba_driver_unregister(&pl022_driver); +} + +module_exit(pl022_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("PL022 SSP Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index f2447a5..bbf9371 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -17,6 +17,7 @@ #include <linux/spinlock.h> #include <linux/workqueue.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 7cf74f8..b0dbf41 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, struct usb_hcd *hcd; if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); + dbg("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; } @@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { - pr_debug("ioremap failed"); + dbg("ioremap failed"); retval = -ENOMEM; goto err2; } - usb_host_clock = clk_get(&pdev->dev, "usb_host"); + usb_host_clock = clk_get(&pdev->dev, NULL); + if (IS_ERR(usb_host_clock)) { + dbg("clk_get failed"); + retval = PTR_ERR(usb_host_clock); + goto err3; + } + ep93xx_start_hc(&pdev->dev); ohci_hcd_init(hcd_to_ohci(hcd)); @@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, return retval; ep93xx_stop_hc(&pdev->dev); +err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 74712cb..2b5a691 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -397,7 +397,7 @@ config FB_SA1100 config FB_IMX tristate "Motorola i.MX LCD support" - depends on FB && (ARCH_IMX || ARCH_MX2) + depends on FB && (ARCH_MX1 || ARCH_MX2) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1759,6 +1759,16 @@ config FB_68328 Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. +config FB_PXA168 + tristate "PXA168/910 LCD framebuffer support" + depends on FB && (CPU_PXA168 || CPU_PXA910) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the built-in LCD controller in the Marvell + MMP processor. + config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA diff --git a/drivers/video/Makefile b/drivers/video/Makefile index d8d0be5..01a819f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE) += gbefb.o obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o +obj-$(CONFIG_FB_PXA168) += pxa168fb.o obj-$(CONFIG_FB_W100) += w100fb.o obj-$(CONFIG_FB_TMIO) += tmiofb.o obj-$(CONFIG_FB_AU1100) += au1100fb.o diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index d1f80ba..fb8163d 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb) } fb->fb.fix.mmio_start = fb->dev->res.start; - fb->fb.fix.mmio_len = 4096; + fb->fb.fix.mmio_len = resource_size(&fb->dev->res); fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len); if (!fb->regs) { diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 9894de1..b7af525 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg) dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); /* We only need one interrupt, it will be re-enabled as needed */ - disable_irq(ichannel->eof_irq); + disable_irq_nosync(ichannel->eof_irq); complete(&mx3_fbi->flip_cmpl); } @@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) mx3fb_blank(FB_BLANK_UNBLANK, fbi); - dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); + dev_info(dev, "registered, using mode %s\n", fb_mode); ret = register_framebuffer(fbi); if (ret < 0) diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c index 8aa6e47..5d4f348 100644 --- a/drivers/video/omap/hwa742.c +++ b/drivers/video/omap/hwa742.c @@ -133,8 +133,7 @@ struct { struct lcd_ctrl_extif *extif; struct lcd_ctrl *int_ctrl; - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); + struct clk *sys_ck; } hwa742; struct lcd_ctrl hwa742_ctrl; @@ -915,14 +914,13 @@ static void hwa742_suspend(void) hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); /* Enable sleep mode */ hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1); - if (hwa742.power_down != NULL) - hwa742.power_down(hwa742.fbdev->dev); + clk_disable(hwa742.sys_ck); } static void hwa742_resume(void) { - if (hwa742.power_up != NULL) - hwa742.power_up(hwa742.fbdev->dev); + clk_enable(hwa742.sys_ck); + /* Disable sleep mode */ hwa742_write_reg(HWA742_POWER_SAVE, 0); while (1) { @@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, omapfb_conf = fbdev->dev->platform_data; ctrl_conf = omapfb_conf->ctrl_platform_data; - if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) { + if (ctrl_conf == NULL) { dev_err(fbdev->dev, "HWA742: missing platform data\n"); r = -ENOENT; goto err1; } - hwa742.power_down = ctrl_conf->power_down; - hwa742.power_up = ctrl_conf->power_up; + hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck"); spin_lock_init(&hwa742.req_lock); @@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, if ((r = hwa742.extif->init(fbdev)) < 0) goto err2; - ext_clk = ctrl_conf->get_clock_rate(fbdev->dev); + ext_clk = clk_get_rate(hwa742.sys_ck); if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) goto err3; hwa742.extif->set_timings(&hwa742.reg_timings); - if (hwa742.power_up != NULL) - hwa742.power_up(fbdev->dev); + clk_enable(hwa742.sys_ck); calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) @@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, return 0; err4: - if (hwa742.power_down != NULL) - hwa742.power_down(fbdev->dev); + clk_disable(hwa742.sys_ck); err3: hwa742.extif->cleanup(); err2: @@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void) hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); hwa742.extif->cleanup(); hwa742.int_ctrl->cleanup(); - if (hwa742.power_down != NULL) - hwa742.power_down(hwa742.fbdev->dev); + clk_disable(hwa742.sys_ck); } struct lcd_ctrl hwa742_ctrl = { diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c new file mode 100644 index 0000000..84d8327 --- /dev/null +++ b/drivers/video/pxa168fb.c @@ -0,0 +1,803 @@ +/* + * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller + * + * Copyright (C) 2008 Marvell International Ltd. + * All rights reserved. + * + * 2009-02-16 adapted from original version for PXA168/910 + * Jun Nie <njun@marvell.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/uaccess.h> +#include <video/pxa168fb.h> + +#include "pxa168fb.h" + +#define DEFAULT_REFRESH 60 /* Hz */ + +static int determine_best_pix_fmt(struct fb_var_screeninfo *var) +{ + /* + * Pseudocolor mode? + */ + if (var->bits_per_pixel == 8) + return PIX_FMT_PSEUDOCOLOR; + + /* + * Check for 565/1555. + */ + if (var->bits_per_pixel == 16 && var->red.length <= 5 && + var->green.length <= 6 && var->blue.length <= 5) { + if (var->transp.length == 0) { + if (var->red.offset >= var->blue.offset) + return PIX_FMT_RGB565; + else + return PIX_FMT_BGR565; + } + + if (var->transp.length == 1 && var->green.length <= 5) { + if (var->red.offset >= var->blue.offset) + return PIX_FMT_RGB1555; + else + return PIX_FMT_BGR1555; + } + + /* fall through */ + } + + /* + * Check for 888/A888. + */ + if (var->bits_per_pixel <= 32 && var->red.length <= 8 && + var->green.length <= 8 && var->blue.length <= 8) { + if (var->bits_per_pixel == 24 && var->transp.length == 0) { + if (var->red.offset >= var->blue.offset) + return PIX_FMT_RGB888PACK; + else + return PIX_FMT_BGR888PACK; + } + + if (var->bits_per_pixel == 32 && var->transp.length == 8) { + if (var->red.offset >= var->blue.offset) + return PIX_FMT_RGBA888; + else + return PIX_FMT_BGRA888; + } else { + if (var->red.offset >= var->blue.offset) + return PIX_FMT_RGB888UNPACK; + else + return PIX_FMT_BGR888UNPACK; + } + + /* fall through */ + } + + return -EINVAL; +} + +static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt) +{ + switch (pix_fmt) { + case PIX_FMT_RGB565: + var->bits_per_pixel = 16; + var->red.offset = 11; var->red.length = 5; + var->green.offset = 5; var->green.length = 6; + var->blue.offset = 0; var->blue.length = 5; + var->transp.offset = 0; var->transp.length = 0; + break; + case PIX_FMT_BGR565: + var->bits_per_pixel = 16; + var->red.offset = 0; var->red.length = 5; + var->green.offset = 5; var->green.length = 6; + var->blue.offset = 11; var->blue.length = 5; + var->transp.offset = 0; var->transp.length = 0; + break; + case PIX_FMT_RGB1555: + var->bits_per_pixel = 16; + var->red.offset = 10; var->red.length = 5; + var->green.offset = 5; var->green.length = 5; + var->blue.offset = 0; var->blue.length = 5; + var->transp.offset = 15; var->transp.length = 1; + break; + case PIX_FMT_BGR1555: + var->bits_per_pixel = 16; + var->red.offset = 0; var->red.length = 5; + var->green.offset = 5; var->green.length = 5; + var->blue.offset = 10; var->blue.length = 5; + var->transp.offset = 15; var->transp.length = 1; + break; + case PIX_FMT_RGB888PACK: + var->bits_per_pixel = 24; + var->red.offset = 16; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 0; var->transp.length = 0; + break; + case PIX_FMT_BGR888PACK: + var->bits_per_pixel = 24; + var->red.offset = 0; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 16; var->blue.length = 8; + var->transp.offset = 0; var->transp.length = 0; + break; + case PIX_FMT_RGBA888: + var->bits_per_pixel = 32; + var->red.offset = 16; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 24; var->transp.length = 8; + break; + case PIX_FMT_BGRA888: + var->bits_per_pixel = 32; + var->red.offset = 0; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 16; var->blue.length = 8; + var->transp.offset = 24; var->transp.length = 8; + break; + case PIX_FMT_PSEUDOCOLOR: + var->bits_per_pixel = 8; + var->red.offset = 0; var->red.length = 8; + var->green.offset = 0; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 0; var->transp.length = 0; + break; + } +} + +static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var, + struct fb_videomode *mode, int pix_fmt, int ystretch) +{ + struct fb_info *info = fbi->info; + + set_pix_fmt(var, pix_fmt); + + var->xres = mode->xres; + var->yres = mode->yres; + var->xres_virtual = max(var->xres, var->xres_virtual); + if (ystretch) + var->yres_virtual = info->fix.smem_len / + (var->xres_virtual * (var->bits_per_pixel >> 3)); + else + var->yres_virtual = max(var->yres, var->yres_virtual); + var->grayscale = 0; + var->accel_flags = FB_ACCEL_NONE; + var->pixclock = mode->pixclock; + var->left_margin = mode->left_margin; + var->right_margin = mode->right_margin; + var->upper_margin = mode->upper_margin; + var->lower_margin = mode->lower_margin; + var->hsync_len = mode->hsync_len; + var->vsync_len = mode->vsync_len; + var->sync = mode->sync; + var->vmode = FB_VMODE_NONINTERLACED; + var->rotate = FB_ROTATE_UR; +} + +static int pxa168fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + int pix_fmt; + + /* + * Determine which pixel format we're going to use. + */ + pix_fmt = determine_best_pix_fmt(var); + if (pix_fmt < 0) + return pix_fmt; + set_pix_fmt(var, pix_fmt); + fbi->pix_fmt = pix_fmt; + + /* + * Basic geometry sanity checks. + */ + if (var->xoffset + var->xres > var->xres_virtual) + return -EINVAL; + if (var->yoffset + var->yres > var->yres_virtual) + return -EINVAL; + if (var->xres + var->right_margin + + var->hsync_len + var->left_margin > 2048) + return -EINVAL; + if (var->yres + var->lower_margin + + var->vsync_len + var->upper_margin > 2048) + return -EINVAL; + + /* + * Check size of framebuffer. + */ + if (var->xres_virtual * var->yres_virtual * + (var->bits_per_pixel >> 3) > info->fix.smem_len) + return -EINVAL; + + return 0; +} + +/* + * The hardware clock divider has an integer and a fractional + * stage: + * + * clk2 = clk_in / integer_divider + * clk_out = clk2 * (1 - (fractional_divider >> 12)) + * + * Calculate integer and fractional divider for given clk_in + * and clk_out. + */ +static void set_clock_divider(struct pxa168fb_info *fbi, + const struct fb_videomode *m) +{ + int divider_int; + int needed_pixclk; + u64 div_result; + u32 x = 0; + + /* + * Notice: The field pixclock is used by linux fb + * is in pixel second. E.g. struct fb_videomode & + * struct fb_var_screeninfo + */ + + /* + * Check input values. + */ + if (!m || !m->pixclock || !m->refresh) { + dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n"); + return; + } + + /* + * Using PLL/AXI clock. + */ + x = 0x80000000; + + /* + * Calc divider according to refresh rate. + */ + div_result = 1000000000000ll; + do_div(div_result, m->pixclock); + needed_pixclk = (u32)div_result; + + divider_int = clk_get_rate(fbi->clk) / needed_pixclk; + + /* check whether divisor is too small. */ + if (divider_int < 2) { + dev_warn(fbi->dev, "Warning: clock source is too slow." + "Try smaller resolution\n"); + divider_int = 2; + } + + /* + * Set setting to reg. + */ + x |= divider_int; + writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV); +} + +static void set_dma_control0(struct pxa168fb_info *fbi) +{ + u32 x; + + /* + * Set bit to enable graphics DMA. + */ + x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); + x |= fbi->active ? 0x00000100 : 0; + fbi->active = 0; + + /* + * If we are in a pseudo-color mode, we need to enable + * palette lookup. + */ + if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) + x |= 0x10000000; + + /* + * Configure hardware pixel format. + */ + x &= ~(0xF << 16); + x |= (fbi->pix_fmt >> 1) << 16; + + /* + * Check red and blue pixel swap. + * 1. source data swap + * 2. panel output data swap + */ + x &= ~(1 << 12); + x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12; + + writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0); +} + +static void set_dma_control1(struct pxa168fb_info *fbi, int sync) +{ + u32 x; + + /* + * Configure default bits: vsync triggers DMA, gated clock + * enable, power save enable, configure alpha registers to + * display 100% graphics, and set pixel command. + */ + x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1); + x |= 0x2032ff81; + + /* + * We trigger DMA on the falling edge of vsync if vsync is + * active low, or on the rising edge if vsync is active high. + */ + if (!(sync & FB_SYNC_VERT_HIGH_ACT)) + x |= 0x08000000; + + writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1); +} + +static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset) +{ + struct pxa168fb_info *fbi = info->par; + struct fb_var_screeninfo *var = &info->var; + int pixel_offset; + unsigned long addr; + + pixel_offset = (yoffset * var->xres_virtual) + xoffset; + + addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3)); + writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0); +} + +static void set_dumb_panel_control(struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + struct pxa168fb_mach_info *mi = fbi->dev->platform_data; + u32 x; + + /* + * Preserve enable flag. + */ + x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001; + + x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28; + x |= mi->gpio_output_data << 20; + x |= mi->gpio_output_mask << 12; + x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0; + x |= mi->invert_composite_blank ? 0x00000040 : 0; + x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0; + x |= mi->invert_pix_val_ena ? 0x00000010 : 0; + x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008; + x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004; + x |= mi->invert_pixclock ? 0x00000002 : 0; + + writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL); +} + +static void set_dumb_screen_dimensions(struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + struct fb_var_screeninfo *v = &info->var; + int x; + int y; + + x = v->xres + v->right_margin + v->hsync_len + v->left_margin; + y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin; + + writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL); +} + +static int pxa168fb_set_par(struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + struct fb_var_screeninfo *var = &info->var; + struct fb_videomode mode; + u32 x; + struct pxa168fb_mach_info *mi; + + mi = fbi->dev->platform_data; + + /* + * Set additional mode info. + */ + if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + else + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; + info->fix.ypanstep = var->yres; + + /* + * Disable panel output while we setup the display. + */ + x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); + writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL); + + /* + * Configure global panel parameters. + */ + writel((var->yres << 16) | var->xres, + fbi->reg_base + LCD_SPU_V_H_ACTIVE); + + /* + * convet var to video mode + */ + fb_var_to_videomode(&mode, &info->var); + + /* Calculate clock divisor. */ + set_clock_divider(fbi, &mode); + + /* Configure dma ctrl regs. */ + set_dma_control0(fbi); + set_dma_control1(fbi, info->var.sync); + + /* + * Configure graphics DMA parameters. + */ + x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH); + x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3); + writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH); + writel((var->yres << 16) | var->xres, + fbi->reg_base + LCD_SPU_GRA_HPXL_VLN); + writel((var->yres << 16) | var->xres, + fbi->reg_base + LCD_SPU_GZM_HPXL_VLN); + + /* + * Configure dumb panel ctrl regs & timings. + */ + set_dumb_panel_control(info); + set_dumb_screen_dimensions(info); + + writel((var->left_margin << 16) | var->right_margin, + fbi->reg_base + LCD_SPU_H_PORCH); + writel((var->upper_margin << 16) | var->lower_margin, + fbi->reg_base + LCD_SPU_V_PORCH); + + /* + * Re-enable panel output. + */ + x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); + writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL); + + return 0; +} + +static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset; +} + +static u32 to_rgb(u16 red, u16 green, u16 blue) +{ + red >>= 8; + green >>= 8; + blue >>= 8; + + return (red << 16) | (green << 8) | blue; +} + +static int +pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int trans, struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + u32 val; + + if (info->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + + if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) { + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue , &info->var.blue); + fbi->pseudo_palette[regno] = val; + } + + if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) { + val = to_rgb(red, green, blue); + writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT); + writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL); + } + + return 0; +} + +static int pxa168fb_blank(int blank, struct fb_info *info) +{ + struct pxa168fb_info *fbi = info->par; + + fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1; + set_dumb_panel_control(info); + + return 0; +} + +static int pxa168fb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + set_graphics_start(info, var->xoffset, var->yoffset); + + return 0; +} + +static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id) +{ + struct pxa168fb_info *fbi = dev_id; + u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR); + + if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) { + + writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK), + fbi->reg_base + SPU_IRQ_ISR); + + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static struct fb_ops pxa168fb_ops = { + .owner = THIS_MODULE, + .fb_check_var = pxa168fb_check_var, + .fb_set_par = pxa168fb_set_par, + .fb_setcolreg = pxa168fb_setcolreg, + .fb_blank = pxa168fb_blank, + .fb_pan_display = pxa168fb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static int __init pxa168fb_init_mode(struct fb_info *info, + struct pxa168fb_mach_info *mi) +{ + struct pxa168fb_info *fbi = info->par; + struct fb_var_screeninfo *var = &info->var; + int ret = 0; + u32 total_w, total_h, refresh; + u64 div_result; + const struct fb_videomode *m; + + /* + * Set default value + */ + refresh = DEFAULT_REFRESH; + + /* try to find best video mode. */ + m = fb_find_best_mode(&info->var, &info->modelist); + if (m) + fb_videomode_to_var(&info->var, m); + + /* Init settings. */ + var->xres_virtual = var->xres; + var->yres_virtual = info->fix.smem_len / + (var->xres_virtual * (var->bits_per_pixel >> 3)); + dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n", + var->xres, var->yres); + + /* correct pixclock. */ + total_w = var->xres + var->left_margin + var->right_margin + + var->hsync_len; + total_h = var->yres + var->upper_margin + var->lower_margin + + var->vsync_len; + + div_result = 1000000000000ll; + do_div(div_result, total_w * total_h * refresh); + var->pixclock = (u32)div_result; + + return ret; +} + +static int __init pxa168fb_probe(struct platform_device *pdev) +{ + struct pxa168fb_mach_info *mi; + struct fb_info *info = 0; + struct pxa168fb_info *fbi = 0; + struct resource *res; + struct clk *clk; + int irq, ret; + + mi = pdev->dev.platform_data; + if (mi == NULL) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + clk = clk_get(&pdev->dev, "LCDCLK"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get LCDCLK"); + return PTR_ERR(clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no IO memory defined\n"); + return -ENOENT; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no IRQ defined\n"); + return -ENOENT; + } + + info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev); + if (info == NULL) { + clk_put(clk); + return -ENOMEM; + } + + /* Initialize private data */ + fbi = info->par; + fbi->info = info; + fbi->clk = clk; + fbi->dev = info->dev = &pdev->dev; + fbi->panel_rbswap = mi->panel_rbswap; + fbi->is_blanked = 0; + fbi->active = mi->active; + + /* + * Initialise static fb parameters. + */ + info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | + FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; + info->node = -1; + strlcpy(info->fix.id, mi->id, 16); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.type_aux = 0; + info->fix.xpanstep = 0; + info->fix.ypanstep = 0; + info->fix.ywrapstep = 0; + info->fix.mmio_start = res->start; + info->fix.mmio_len = res->end - res->start + 1; + info->fix.accel = FB_ACCEL_NONE; + info->fbops = &pxa168fb_ops; + info->pseudo_palette = fbi->pseudo_palette; + + /* + * Map LCD controller registers. + */ + fbi->reg_base = ioremap_nocache(res->start, res->end - res->start); + if (fbi->reg_base == NULL) { + ret = -ENOMEM; + goto failed; + } + + /* + * Allocate framebuffer memory. + */ + info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE); + + info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len, + &fbi->fb_start_dma, GFP_KERNEL); + if (info->screen_base == NULL) { + ret = -ENOMEM; + goto failed; + } + + info->fix.smem_start = (unsigned long)fbi->fb_start_dma; + + /* + * Set video mode according to platform data. + */ + set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1); + + fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist); + + /* + * init video mode data. + */ + pxa168fb_init_mode(info, mi); + + ret = pxa168fb_check_var(&info->var, info); + if (ret) + goto failed_free_fbmem; + + /* + * Fill in sane defaults. + */ + ret = pxa168fb_check_var(&info->var, info); + if (ret) + goto failed; + + /* + * enable controller clock + */ + clk_enable(fbi->clk); + + pxa168fb_set_par(info); + + /* + * Configure default register values. + */ + writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR); + writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL); + writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1); + writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN); + writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0); + writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1), + fbi->reg_base + LCD_SPU_SRAM_PARA1); + + /* + * Allocate color map. + */ + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { + ret = -ENOMEM; + goto failed_free_clk; + } + + /* + * Register irq handler. + */ + ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED, + info->fix.id, fbi); + if (ret < 0) { + dev_err(&pdev->dev, "unable to request IRQ\n"); + ret = -ENXIO; + goto failed_free_cmap; + } + + /* + * Enable GFX interrupt + */ + writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA); + + /* + * Register framebuffer. + */ + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret); + ret = -ENXIO; + goto failed_free_irq; + } + + platform_set_drvdata(pdev, fbi); + return 0; + +failed_free_irq: + free_irq(irq, fbi); +failed_free_cmap: + fb_dealloc_cmap(&info->cmap); +failed_free_clk: + clk_disable(fbi->clk); +failed_free_fbmem: + dma_free_coherent(fbi->dev, info->fix.smem_len, + info->screen_base, fbi->fb_start_dma); +failed: + kfree(info); + clk_put(clk); + + dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret); + return ret; +} + +static struct platform_driver pxa168fb_driver = { + .driver = { + .name = "pxa168-fb", + .owner = THIS_MODULE, + }, + .probe = pxa168fb_probe, +}; + +static int __devinit pxa168fb_init(void) +{ + return platform_driver_register(&pxa168fb_driver); +} +module_init(pxa168fb_init); + +MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> " + "Green Wan <gwan@marvell.com>"); +MODULE_DESCRIPTION("Framebuffer driver for PXA168/910"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h new file mode 100644 index 0000000..eee0927 --- /dev/null +++ b/drivers/video/pxa168fb.h @@ -0,0 +1,558 @@ +#ifndef __PXA168FB_H__ +#define __PXA168FB_H__ + +/* ------------< LCD register >------------ */ +/* Video Frame 0&1 start address registers */ +#define LCD_SPU_DMA_START_ADDR_Y0 0x00C0 +#define LCD_SPU_DMA_START_ADDR_U0 0x00C4 +#define LCD_SPU_DMA_START_ADDR_V0 0x00C8 +#define LCD_CFG_DMA_START_ADDR_0 0x00CC /* Cmd address */ +#define LCD_SPU_DMA_START_ADDR_Y1 0x00D0 +#define LCD_SPU_DMA_START_ADDR_U1 0x00D4 +#define LCD_SPU_DMA_START_ADDR_V1 0x00D8 +#define LCD_CFG_DMA_START_ADDR_1 0x00DC /* Cmd address */ + +/* YC & UV Pitch */ +#define LCD_SPU_DMA_PITCH_YC 0x00E0 +#define SPU_DMA_PITCH_C(c) ((c) << 16) +#define SPU_DMA_PITCH_Y(y) (y) +#define LCD_SPU_DMA_PITCH_UV 0x00E4 +#define SPU_DMA_PITCH_V(v) ((v) << 16) +#define SPU_DMA_PITCH_U(u) (u) + +/* Video Starting Point on Screen Register */ +#define LCD_SPUT_DMA_OVSA_HPXL_VLN 0x00E8 +#define CFG_DMA_OVSA_VLN(y) ((y) << 16) /* 0~0xfff */ +#define CFG_DMA_OVSA_HPXL(x) (x) /* 0~0xfff */ + +/* Video Size Register */ +#define LCD_SPU_DMA_HPXL_VLN 0x00EC +#define CFG_DMA_VLN(y) ((y) << 16) +#define CFG_DMA_HPXL(x) (x) + +/* Video Size After zooming Register */ +#define LCD_SPU_DZM_HPXL_VLN 0x00F0 +#define CFG_DZM_VLN(y) ((y) << 16) +#define CFG_DZM_HPXL(x) (x) + +/* Graphic Frame 0&1 Starting Address Register */ +#define LCD_CFG_GRA_START_ADDR0 0x00F4 +#define LCD_CFG_GRA_START_ADDR1 0x00F8 + +/* Graphic Frame Pitch */ +#define LCD_CFG_GRA_PITCH 0x00FC + +/* Graphic Starting Point on Screen Register */ +#define LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100 +#define CFG_GRA_OVSA_VLN(y) ((y) << 16) +#define CFG_GRA_OVSA_HPXL(x) (x) + +/* Graphic Size Register */ +#define LCD_SPU_GRA_HPXL_VLN 0x0104 +#define CFG_GRA_VLN(y) ((y) << 16) +#define CFG_GRA_HPXL(x) (x) + +/* Graphic Size after Zooming Register */ +#define LCD_SPU_GZM_HPXL_VLN 0x0108 +#define CFG_GZM_VLN(y) ((y) << 16) +#define CFG_GZM_HPXL(x) (x) + +/* HW Cursor Starting Point on Screen Register */ +#define LCD_SPU_HWC_OVSA_HPXL_VLN 0x010C +#define CFG_HWC_OVSA_VLN(y) ((y) << 16) +#define CFG_HWC_OVSA_HPXL(x) (x) + +/* HW Cursor Size */ +#define LCD_SPU_HWC_HPXL_VLN 0x0110 +#define CFG_HWC_VLN(y) ((y) << 16) +#define CFG_HWC_HPXL(x) (x) + +/* Total Screen Size Register */ +#define LCD_SPUT_V_H_TOTAL 0x0114 +#define CFG_V_TOTAL(y) ((y) << 16) +#define CFG_H_TOTAL(x) (x) + +/* Total Screen Active Size Register */ +#define LCD_SPU_V_H_ACTIVE 0x0118 +#define CFG_V_ACTIVE(y) ((y) << 16) +#define CFG_H_ACTIVE(x) (x) + +/* Screen H&V Porch Register */ +#define LCD_SPU_H_PORCH 0x011C +#define CFG_H_BACK_PORCH(b) ((b) << 16) +#define CFG_H_FRONT_PORCH(f) (f) +#define LCD_SPU_V_PORCH 0x0120 +#define CFG_V_BACK_PORCH(b) ((b) << 16) +#define CFG_V_FRONT_PORCH(f) (f) + +/* Screen Blank Color Register */ +#define LCD_SPU_BLANKCOLOR 0x0124 +#define CFG_BLANKCOLOR_MASK 0x00FFFFFF +#define CFG_BLANKCOLOR_R_MASK 0x000000FF +#define CFG_BLANKCOLOR_G_MASK 0x0000FF00 +#define CFG_BLANKCOLOR_B_MASK 0x00FF0000 + +/* HW Cursor Color 1&2 Register */ +#define LCD_SPU_ALPHA_COLOR1 0x0128 +#define CFG_HWC_COLOR1 0x00FFFFFF +#define CFG_HWC_COLOR1_R(red) ((red) << 16) +#define CFG_HWC_COLOR1_G(green) ((green) << 8) +#define CFG_HWC_COLOR1_B(blue) (blue) +#define CFG_HWC_COLOR1_R_MASK 0x000000FF +#define CFG_HWC_COLOR1_G_MASK 0x0000FF00 +#define CFG_HWC_COLOR1_B_MASK 0x00FF0000 +#define LCD_SPU_ALPHA_COLOR2 0x012C +#define CFG_HWC_COLOR2 0x00FFFFFF +#define CFG_HWC_COLOR2_R_MASK 0x000000FF +#define CFG_HWC_COLOR2_G_MASK 0x0000FF00 +#define CFG_HWC_COLOR2_B_MASK 0x00FF0000 + +/* Video YUV Color Key Control */ +#define LCD_SPU_COLORKEY_Y 0x0130 +#define CFG_CKEY_Y2(y2) ((y2) << 24) +#define CFG_CKEY_Y2_MASK 0xFF000000 +#define CFG_CKEY_Y1(y1) ((y1) << 16) +#define CFG_CKEY_Y1_MASK 0x00FF0000 +#define CFG_CKEY_Y(y) ((y) << 8) +#define CFG_CKEY_Y_MASK 0x0000FF00 +#define CFG_ALPHA_Y(y) (y) +#define CFG_ALPHA_Y_MASK 0x000000FF +#define LCD_SPU_COLORKEY_U 0x0134 +#define CFG_CKEY_U2(u2) ((u2) << 24) +#define CFG_CKEY_U2_MASK 0xFF000000 +#define CFG_CKEY_U1(u1) ((u1) << 16) +#define CFG_CKEY_U1_MASK 0x00FF0000 +#define CFG_CKEY_U(u) ((u) << 8) +#define CFG_CKEY_U_MASK 0x0000FF00 +#define CFG_ALPHA_U(u) (u) +#define CFG_ALPHA_U_MASK 0x000000FF +#define LCD_SPU_COLORKEY_V 0x0138 +#define CFG_CKEY_V2(v2) ((v2) << 24) +#define CFG_CKEY_V2_MASK 0xFF000000 +#define CFG_CKEY_V1(v1) ((v1) << 16) +#define CFG_CKEY_V1_MASK 0x00FF0000 +#define CFG_CKEY_V(v) ((v) << 8) +#define CFG_CKEY_V_MASK 0x0000FF00 +#define CFG_ALPHA_V(v) (v) +#define CFG_ALPHA_V_MASK 0x000000FF + +/* SPI Read Data Register */ +#define LCD_SPU_SPI_RXDATA 0x0140 + +/* Smart Panel Read Data Register */ +#define LCD_SPU_ISA_RSDATA 0x0144 +#define ISA_RXDATA_16BIT_1_DATA_MASK 0x000000FF +#define ISA_RXDATA_16BIT_2_DATA_MASK 0x0000FF00 +#define ISA_RXDATA_16BIT_3_DATA_MASK 0x00FF0000 +#define ISA_RXDATA_16BIT_4_DATA_MASK 0xFF000000 +#define ISA_RXDATA_32BIT_1_DATA_MASK 0x00FFFFFF + +/* HWC SRAM Read Data Register */ +#define LCD_SPU_HWC_RDDAT 0x0158 + +/* Gamma Table SRAM Read Data Register */ +#define LCD_SPU_GAMMA_RDDAT 0x015c +#define CFG_GAMMA_RDDAT_MASK 0x000000FF + +/* Palette Table SRAM Read Data Register */ +#define LCD_SPU_PALETTE_RDDAT 0x0160 +#define CFG_PALETTE_RDDAT_MASK 0x00FFFFFF + +/* I/O Pads Input Read Only Register */ +#define LCD_SPU_IOPAD_IN 0x0178 +#define CFG_IOPAD_IN_MASK 0x0FFFFFFF + +/* Reserved Read Only Registers */ +#define LCD_CFG_RDREG5F 0x017C +#define IRE_FRAME_CNT_MASK 0x000000C0 +#define IPE_FRAME_CNT_MASK 0x00000030 +#define GRA_FRAME_CNT_MASK 0x0000000C /* Graphic */ +#define DMA_FRAME_CNT_MASK 0x00000003 /* Video */ + +/* SPI Control Register. */ +#define LCD_SPU_SPI_CTRL 0x0180 +#define CFG_SCLKCNT(div) ((div) << 24) /* 0xFF~0x2 */ +#define CFG_SCLKCNT_MASK 0xFF000000 +#define CFG_RXBITS(rx) ((rx) << 16) /* 0x1F~0x1 */ +#define CFG_RXBITS_MASK 0x00FF0000 +#define CFG_TXBITS(tx) ((tx) << 8) /* 0x1F~0x1 */ +#define CFG_TXBITS_MASK 0x0000FF00 +#define CFG_CLKINV(clk) ((clk) << 7) +#define CFG_CLKINV_MASK 0x00000080 +#define CFG_KEEPXFER(transfer) ((transfer) << 6) +#define CFG_KEEPXFER_MASK 0x00000040 +#define CFG_RXBITSTO0(rx) ((rx) << 5) +#define CFG_RXBITSTO0_MASK 0x00000020 +#define CFG_TXBITSTO0(tx) ((tx) << 4) +#define CFG_TXBITSTO0_MASK 0x00000010 +#define CFG_SPI_ENA(spi) ((spi) << 3) +#define CFG_SPI_ENA_MASK 0x00000008 +#define CFG_SPI_SEL(spi) ((spi) << 2) +#define CFG_SPI_SEL_MASK 0x00000004 +#define CFG_SPI_3W4WB(wire) ((wire) << 1) +#define CFG_SPI_3W4WB_MASK 0x00000002 +#define CFG_SPI_START(start) (start) +#define CFG_SPI_START_MASK 0x00000001 + +/* SPI Tx Data Register */ +#define LCD_SPU_SPI_TXDATA 0x0184 + +/* + 1. Smart Pannel 8-bit Bus Control Register. + 2. AHB Slave Path Data Port Register +*/ +#define LCD_SPU_SMPN_CTRL 0x0188 + +/* DMA Control 0 Register */ +#define LCD_SPU_DMA_CTRL0 0x0190 +#define CFG_NOBLENDING(nb) ((nb) << 31) +#define CFG_NOBLENDING_MASK 0x80000000 +#define CFG_GAMMA_ENA(gn) ((gn) << 30) +#define CFG_GAMMA_ENA_MASK 0x40000000 +#define CFG_CBSH_ENA(cn) ((cn) << 29) +#define CFG_CBSH_ENA_MASK 0x20000000 +#define CFG_PALETTE_ENA(pn) ((pn) << 28) +#define CFG_PALETTE_ENA_MASK 0x10000000 +#define CFG_ARBFAST_ENA(an) ((an) << 27) +#define CFG_ARBFAST_ENA_MASK 0x08000000 +#define CFG_HWC_1BITMOD(mode) ((mode) << 26) +#define CFG_HWC_1BITMOD_MASK 0x04000000 +#define CFG_HWC_1BITENA(mn) ((mn) << 25) +#define CFG_HWC_1BITENA_MASK 0x02000000 +#define CFG_HWC_ENA(cn) ((cn) << 24) +#define CFG_HWC_ENA_MASK 0x01000000 +#define CFG_DMAFORMAT(dmaformat) ((dmaformat) << 20) +#define CFG_DMAFORMAT_MASK 0x00F00000 +#define CFG_GRAFORMAT(graformat) ((graformat) << 16) +#define CFG_GRAFORMAT_MASK 0x000F0000 +/* for graphic part */ +#define CFG_GRA_FTOGGLE(toggle) ((toggle) << 15) +#define CFG_GRA_FTOGGLE_MASK 0x00008000 +#define CFG_GRA_HSMOOTH(smooth) ((smooth) << 14) +#define CFG_GRA_HSMOOTH_MASK 0x00004000 +#define CFG_GRA_TSTMODE(test) ((test) << 13) +#define CFG_GRA_TSTMODE_MASK 0x00002000 +#define CFG_GRA_SWAPRB(swap) ((swap) << 12) +#define CFG_GRA_SWAPRB_MASK 0x00001000 +#define CFG_GRA_SWAPUV(swap) ((swap) << 11) +#define CFG_GRA_SWAPUV_MASK 0x00000800 +#define CFG_GRA_SWAPYU(swap) ((swap) << 10) +#define CFG_GRA_SWAPYU_MASK 0x00000400 +#define CFG_YUV2RGB_GRA(cvrt) ((cvrt) << 9) +#define CFG_YUV2RGB_GRA_MASK 0x00000200 +#define CFG_GRA_ENA(gra) ((gra) << 8) +#define CFG_GRA_ENA_MASK 0x00000100 +/* for video part */ +#define CFG_DMA_FTOGGLE(toggle) ((toggle) << 7) +#define CFG_DMA_FTOGGLE_MASK 0x00000080 +#define CFG_DMA_HSMOOTH(smooth) ((smooth) << 6) +#define CFG_DMA_HSMOOTH_MASK 0x00000040 +#define CFG_DMA_TSTMODE(test) ((test) << 5) +#define CFG_DMA_TSTMODE_MASK 0x00000020 +#define CFG_DMA_SWAPRB(swap) ((swap) << 4) +#define CFG_DMA_SWAPRB_MASK 0x00000010 +#define CFG_DMA_SWAPUV(swap) ((swap) << 3) +#define CFG_DMA_SWAPUV_MASK 0x00000008 +#define CFG_DMA_SWAPYU(swap) ((swap) << 2) +#define CFG_DMA_SWAPYU_MASK 0x00000004 +#define CFG_DMA_SWAP_MASK 0x0000001C +#define CFG_YUV2RGB_DMA(cvrt) ((cvrt) << 1) +#define CFG_YUV2RGB_DMA_MASK 0x00000002 +#define CFG_DMA_ENA(video) (video) +#define CFG_DMA_ENA_MASK 0x00000001 + +/* DMA Control 1 Register */ +#define LCD_SPU_DMA_CTRL1 0x0194 +#define CFG_FRAME_TRIG(trig) ((trig) << 31) +#define CFG_FRAME_TRIG_MASK 0x80000000 +#define CFG_VSYNC_TRIG(trig) ((trig) << 28) +#define CFG_VSYNC_TRIG_MASK 0x70000000 +#define CFG_VSYNC_INV(inv) ((inv) << 27) +#define CFG_VSYNC_INV_MASK 0x08000000 +#define CFG_COLOR_KEY_MODE(cmode) ((cmode) << 24) +#define CFG_COLOR_KEY_MASK 0x07000000 +#define CFG_CARRY(carry) ((carry) << 23) +#define CFG_CARRY_MASK 0x00800000 +#define CFG_LNBUF_ENA(lnbuf) ((lnbuf) << 22) +#define CFG_LNBUF_ENA_MASK 0x00400000 +#define CFG_GATED_ENA(gated) ((gated) << 21) +#define CFG_GATED_ENA_MASK 0x00200000 +#define CFG_PWRDN_ENA(power) ((power) << 20) +#define CFG_PWRDN_ENA_MASK 0x00100000 +#define CFG_DSCALE(dscale) ((dscale) << 18) +#define CFG_DSCALE_MASK 0x000C0000 +#define CFG_ALPHA_MODE(amode) ((amode) << 16) +#define CFG_ALPHA_MODE_MASK 0x00030000 +#define CFG_ALPHA(alpha) ((alpha) << 8) +#define CFG_ALPHA_MASK 0x0000FF00 +#define CFG_PXLCMD(pxlcmd) (pxlcmd) +#define CFG_PXLCMD_MASK 0x000000FF + +/* SRAM Control Register */ +#define LCD_SPU_SRAM_CTRL 0x0198 +#define CFG_SRAM_INIT_WR_RD(mode) ((mode) << 14) +#define CFG_SRAM_INIT_WR_RD_MASK 0x0000C000 +#define CFG_SRAM_ADDR_LCDID(id) ((id) << 8) +#define CFG_SRAM_ADDR_LCDID_MASK 0x00000F00 +#define CFG_SRAM_ADDR(addr) (addr) +#define CFG_SRAM_ADDR_MASK 0x000000FF + +/* SRAM Write Data Register */ +#define LCD_SPU_SRAM_WRDAT 0x019C + +/* SRAM RTC/WTC Control Register */ +#define LCD_SPU_SRAM_PARA0 0x01A0 + +/* SRAM Power Down Control Register */ +#define LCD_SPU_SRAM_PARA1 0x01A4 +#define CFG_CSB_256x32(hwc) ((hwc) << 15) /* HWC */ +#define CFG_CSB_256x32_MASK 0x00008000 +#define CFG_CSB_256x24(palette) ((palette) << 14) /* Palette */ +#define CFG_CSB_256x24_MASK 0x00004000 +#define CFG_CSB_256x8(gamma) ((gamma) << 13) /* Gamma */ +#define CFG_CSB_256x8_MASK 0x00002000 +#define CFG_PDWN256x32(pdwn) ((pdwn) << 7) /* HWC */ +#define CFG_PDWN256x32_MASK 0x00000080 +#define CFG_PDWN256x24(pdwn) ((pdwn) << 6) /* Palette */ +#define CFG_PDWN256x24_MASK 0x00000040 +#define CFG_PDWN256x8(pdwn) ((pdwn) << 5) /* Gamma */ +#define CFG_PDWN256x8_MASK 0x00000020 +#define CFG_PDWN32x32(pdwn) ((pdwn) << 3) +#define CFG_PDWN32x32_MASK 0x00000008 +#define CFG_PDWN16x66(pdwn) ((pdwn) << 2) +#define CFG_PDWN16x66_MASK 0x00000004 +#define CFG_PDWN32x66(pdwn) ((pdwn) << 1) +#define CFG_PDWN32x66_MASK 0x00000002 +#define CFG_PDWN64x66(pdwn) (pdwn) +#define CFG_PDWN64x66_MASK 0x00000001 + +/* Smart or Dumb Panel Clock Divider */ +#define LCD_CFG_SCLK_DIV 0x01A8 +#define SCLK_SOURCE_SELECT(src) ((src) << 31) +#define SCLK_SOURCE_SELECT_MASK 0x80000000 +#define CLK_FRACDIV(frac) ((frac) << 16) +#define CLK_FRACDIV_MASK 0x0FFF0000 +#define CLK_INT_DIV(div) (div) +#define CLK_INT_DIV_MASK 0x0000FFFF + +/* Video Contrast Register */ +#define LCD_SPU_CONTRAST 0x01AC +#define CFG_BRIGHTNESS(bright) ((bright) << 16) +#define CFG_BRIGHTNESS_MASK 0xFFFF0000 +#define CFG_CONTRAST(contrast) (contrast) +#define CFG_CONTRAST_MASK 0x0000FFFF + +/* Video Saturation Register */ +#define LCD_SPU_SATURATION 0x01B0 +#define CFG_C_MULTS(mult) ((mult) << 16) +#define CFG_C_MULTS_MASK 0xFFFF0000 +#define CFG_SATURATION(sat) (sat) +#define CFG_SATURATION_MASK 0x0000FFFF + +/* Video Hue Adjust Register */ +#define LCD_SPU_CBSH_HUE 0x01B4 +#define CFG_SIN0(sin0) ((sin0) << 16) +#define CFG_SIN0_MASK 0xFFFF0000 +#define CFG_COS0(con0) (con0) +#define CFG_COS0_MASK 0x0000FFFF + +/* Dump LCD Panel Control Register */ +#define LCD_SPU_DUMB_CTRL 0x01B8 +#define CFG_DUMBMODE(mode) ((mode) << 28) +#define CFG_DUMBMODE_MASK 0xF0000000 +#define CFG_LCDGPIO_O(data) ((data) << 20) +#define CFG_LCDGPIO_O_MASK 0x0FF00000 +#define CFG_LCDGPIO_ENA(gpio) ((gpio) << 12) +#define CFG_LCDGPIO_ENA_MASK 0x000FF000 +#define CFG_BIAS_OUT(bias) ((bias) << 8) +#define CFG_BIAS_OUT_MASK 0x00000100 +#define CFG_REVERSE_RGB(rRGB) ((rRGB) << 7) +#define CFG_REVERSE_RGB_MASK 0x00000080 +#define CFG_INV_COMPBLANK(blank) ((blank) << 6) +#define CFG_INV_COMPBLANK_MASK 0x00000040 +#define CFG_INV_COMPSYNC(sync) ((sync) << 5) +#define CFG_INV_COMPSYNC_MASK 0x00000020 +#define CFG_INV_HENA(hena) ((hena) << 4) +#define CFG_INV_HENA_MASK 0x00000010 +#define CFG_INV_VSYNC(vsync) ((vsync) << 3) +#define CFG_INV_VSYNC_MASK 0x00000008 +#define CFG_INV_HSYNC(hsync) ((hsync) << 2) +#define CFG_INV_HSYNC_MASK 0x00000004 +#define CFG_INV_PCLK(pclk) ((pclk) << 1) +#define CFG_INV_PCLK_MASK 0x00000002 +#define CFG_DUMB_ENA(dumb) (dumb) +#define CFG_DUMB_ENA_MASK 0x00000001 + +/* LCD I/O Pads Control Register */ +#define SPU_IOPAD_CONTROL 0x01BC +#define CFG_GRA_VM_ENA(vm) ((vm) << 15) /* gfx */ +#define CFG_GRA_VM_ENA_MASK 0x00008000 +#define CFG_DMA_VM_ENA(vm) ((vm) << 13) /* video */ +#define CFG_DMA_VM_ENA_MASK 0x00002000 +#define CFG_CMD_VM_ENA(vm) ((vm) << 13) +#define CFG_CMD_VM_ENA_MASK 0x00000800 +#define CFG_CSC(csc) ((csc) << 8) /* csc */ +#define CFG_CSC_MASK 0x00000300 +#define CFG_AXICTRL(axi) ((axi) << 4) +#define CFG_AXICTRL_MASK 0x000000F0 +#define CFG_IOPADMODE(iopad) (iopad) +#define CFG_IOPADMODE_MASK 0x0000000F + +/* LCD Interrupt Control Register */ +#define SPU_IRQ_ENA 0x01C0 +#define DMA_FRAME_IRQ0_ENA(irq) ((irq) << 31) +#define DMA_FRAME_IRQ0_ENA_MASK 0x80000000 +#define DMA_FRAME_IRQ1_ENA(irq) ((irq) << 30) +#define DMA_FRAME_IRQ1_ENA_MASK 0x40000000 +#define DMA_FF_UNDERFLOW_ENA(ff) ((ff) << 29) +#define DMA_FF_UNDERFLOW_ENA_MASK 0x20000000 +#define GRA_FRAME_IRQ0_ENA(irq) ((irq) << 27) +#define GRA_FRAME_IRQ0_ENA_MASK 0x08000000 +#define GRA_FRAME_IRQ1_ENA(irq) ((irq) << 26) +#define GRA_FRAME_IRQ1_ENA_MASK 0x04000000 +#define GRA_FF_UNDERFLOW_ENA(ff) ((ff) << 25) +#define GRA_FF_UNDERFLOW_ENA_MASK 0x02000000 +#define VSYNC_IRQ_ENA(vsync_irq) ((vsync_irq) << 23) +#define VSYNC_IRQ_ENA_MASK 0x00800000 +#define DUMB_FRAMEDONE_ENA(fdone) ((fdone) << 22) +#define DUMB_FRAMEDONE_ENA_MASK 0x00400000 +#define TWC_FRAMEDONE_ENA(fdone) ((fdone) << 21) +#define TWC_FRAMEDONE_ENA_MASK 0x00200000 +#define HWC_FRAMEDONE_ENA(fdone) ((fdone) << 20) +#define HWC_FRAMEDONE_ENA_MASK 0x00100000 +#define SLV_IRQ_ENA(irq) ((irq) << 19) +#define SLV_IRQ_ENA_MASK 0x00080000 +#define SPI_IRQ_ENA(irq) ((irq) << 18) +#define SPI_IRQ_ENA_MASK 0x00040000 +#define PWRDN_IRQ_ENA(irq) ((irq) << 17) +#define PWRDN_IRQ_ENA_MASK 0x00020000 +#define ERR_IRQ_ENA(irq) ((irq) << 16) +#define ERR_IRQ_ENA_MASK 0x00010000 +#define CLEAN_SPU_IRQ_ISR(irq) (irq) +#define CLEAN_SPU_IRQ_ISR_MASK 0x0000FFFF + +/* LCD Interrupt Status Register */ +#define SPU_IRQ_ISR 0x01C4 +#define DMA_FRAME_IRQ0(irq) ((irq) << 31) +#define DMA_FRAME_IRQ0_MASK 0x80000000 +#define DMA_FRAME_IRQ1(irq) ((irq) << 30) +#define DMA_FRAME_IRQ1_MASK 0x40000000 +#define DMA_FF_UNDERFLOW(ff) ((ff) << 29) +#define DMA_FF_UNDERFLOW_MASK 0x20000000 +#define GRA_FRAME_IRQ0(irq) ((irq) << 27) +#define GRA_FRAME_IRQ0_MASK 0x08000000 +#define GRA_FRAME_IRQ1(irq) ((irq) << 26) +#define GRA_FRAME_IRQ1_MASK 0x04000000 +#define GRA_FF_UNDERFLOW(ff) ((ff) << 25) +#define GRA_FF_UNDERFLOW_MASK 0x02000000 +#define VSYNC_IRQ(vsync_irq) ((vsync_irq) << 23) +#define VSYNC_IRQ_MASK 0x00800000 +#define DUMB_FRAMEDONE(fdone) ((fdone) << 22) +#define DUMB_FRAMEDONE_MASK 0x00400000 +#define TWC_FRAMEDONE(fdone) ((fdone) << 21) +#define TWC_FRAMEDONE_MASK 0x00200000 +#define HWC_FRAMEDONE(fdone) ((fdone) << 20) +#define HWC_FRAMEDONE_MASK 0x00100000 +#define SLV_IRQ(irq) ((irq) << 19) +#define SLV_IRQ_MASK 0x00080000 +#define SPI_IRQ(irq) ((irq) << 18) +#define SPI_IRQ_MASK 0x00040000 +#define PWRDN_IRQ(irq) ((irq) << 17) +#define PWRDN_IRQ_MASK 0x00020000 +#define ERR_IRQ(irq) ((irq) << 16) +#define ERR_IRQ_MASK 0x00010000 +/* read-only */ +#define DMA_FRAME_IRQ0_LEVEL_MASK 0x00008000 +#define DMA_FRAME_IRQ1_LEVEL_MASK 0x00004000 +#define DMA_FRAME_CNT_ISR_MASK 0x00003000 +#define GRA_FRAME_IRQ0_LEVEL_MASK 0x00000800 +#define GRA_FRAME_IRQ1_LEVEL_MASK 0x00000400 +#define GRA_FRAME_CNT_ISR_MASK 0x00000300 +#define VSYNC_IRQ_LEVEL_MASK 0x00000080 +#define DUMB_FRAMEDONE_LEVEL_MASK 0x00000040 +#define TWC_FRAMEDONE_LEVEL_MASK 0x00000020 +#define HWC_FRAMEDONE_LEVEL_MASK 0x00000010 +#define SLV_FF_EMPTY_MASK 0x00000008 +#define DMA_FF_ALLEMPTY_MASK 0x00000004 +#define GRA_FF_ALLEMPTY_MASK 0x00000002 +#define PWRDN_IRQ_LEVEL_MASK 0x00000001 + + +/* + * defined Video Memory Color format for DMA control 0 register + * DMA0 bit[23:20] + */ +#define VMODE_RGB565 0x0 +#define VMODE_RGB1555 0x1 +#define VMODE_RGB888PACKED 0x2 +#define VMODE_RGB888UNPACKED 0x3 +#define VMODE_RGBA888 0x4 +#define VMODE_YUV422PACKED 0x5 +#define VMODE_YUV422PLANAR 0x6 +#define VMODE_YUV420PLANAR 0x7 +#define VMODE_SMPNCMD 0x8 +#define VMODE_PALETTE4BIT 0x9 +#define VMODE_PALETTE8BIT 0xa +#define VMODE_RESERVED 0xb + +/* + * defined Graphic Memory Color format for DMA control 0 register + * DMA0 bit[19:16] + */ +#define GMODE_RGB565 0x0 +#define GMODE_RGB1555 0x1 +#define GMODE_RGB888PACKED 0x2 +#define GMODE_RGB888UNPACKED 0x3 +#define GMODE_RGBA888 0x4 +#define GMODE_YUV422PACKED 0x5 +#define GMODE_YUV422PLANAR 0x6 +#define GMODE_YUV420PLANAR 0x7 +#define GMODE_SMPNCMD 0x8 +#define GMODE_PALETTE4BIT 0x9 +#define GMODE_PALETTE8BIT 0xa +#define GMODE_RESERVED 0xb + +/* + * define for DMA control 1 register + */ +#define DMA1_FRAME_TRIG 31 /* bit location */ +#define DMA1_VSYNC_MODE 28 +#define DMA1_VSYNC_INV 27 +#define DMA1_CKEY 24 +#define DMA1_CARRY 23 +#define DMA1_LNBUF_ENA 22 +#define DMA1_GATED_ENA 21 +#define DMA1_PWRDN_ENA 20 +#define DMA1_DSCALE 18 +#define DMA1_ALPHA_MODE 16 +#define DMA1_ALPHA 08 +#define DMA1_PXLCMD 00 + +/* + * defined for Configure Dumb Mode + * DUMB LCD Panel bit[31:28] + */ +#define DUMB16_RGB565_0 0x0 +#define DUMB16_RGB565_1 0x1 +#define DUMB18_RGB666_0 0x2 +#define DUMB18_RGB666_1 0x3 +#define DUMB12_RGB444_0 0x4 +#define DUMB12_RGB444_1 0x5 +#define DUMB24_RGB888_0 0x6 +#define DUMB_BLANK 0x7 + +/* + * defined for Configure I/O Pin Allocation Mode + * LCD LCD I/O Pads control register bit[3:0] + */ +#define IOPAD_DUMB24 0x0 +#define IOPAD_DUMB18SPI 0x1 +#define IOPAD_DUMB18GPIO 0x2 +#define IOPAD_DUMB16SPI 0x3 +#define IOPAD_DUMB16GPIO 0x4 +#define IOPAD_DUMB12 0x5 +#define IOPAD_SMART18SPI 0x6 +#define IOPAD_SMART16SPI 0x7 +#define IOPAD_SMART8BOTH 0x8 + +#endif /* __PXA168FB_H__ */ diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 5eb8f21..5744cac 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG NOTE: once enabled, this timer cannot be disabled. Say N if you are unsure. -config ORION5X_WATCHDOG - tristate "Orion5x watchdog" - depends on ARCH_ORION5X +config ORION_WATCHDOG + tristate "Orion watchdog" + depends on ARCH_ORION5X || ARCH_KIRKWOOD help Say Y here if to include support for the watchdog timer - in the Orion5x ARM SoCs. + in the Marvell Orion5x and Kirkwood ARM SoCs. To compile this driver as a module, choose M here: the - module will be called orion5x_wdt. + module will be called orion_wdt. # AVR32 Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7f8c56b..c3afa14 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o -obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o +obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c index 2cde568..2d9fb96 100644 --- a/drivers/watchdog/orion5x_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -1,7 +1,7 @@ /* - * drivers/watchdog/orion5x_wdt.c + * drivers/watchdog/orion_wdt.c * - * Watchdog driver for Orion5x processors + * Watchdog driver for Orion/Kirkwood processors * * Author: Sylver Bruneau <sylver.bruneau@googlemail.com> * @@ -23,7 +23,7 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <mach/bridge-regs.h> -#include <plat/orion5x_wdt.h> +#include <plat/orion_wdt.h> /* * Watchdog timer block registers. @@ -43,7 +43,7 @@ static unsigned int wdt_tclk; static unsigned long wdt_status; static spinlock_t wdt_lock; -static void orion5x_wdt_ping(void) +static void orion_wdt_ping(void) { spin_lock(&wdt_lock); @@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void) spin_unlock(&wdt_lock); } -static void orion5x_wdt_enable(void) +static void orion_wdt_enable(void) { u32 reg; @@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void) writel(reg, TIMER_CTRL); /* Enable reset on watchdog */ - reg = readl(CPU_RESET_MASK); - reg |= WDT_RESET; - writel(reg, CPU_RESET_MASK); + reg = readl(RSTOUTn_MASK); + reg |= WDT_RESET_OUT_EN; + writel(reg, RSTOUTn_MASK); spin_unlock(&wdt_lock); } -static void orion5x_wdt_disable(void) +static void orion_wdt_disable(void) { u32 reg; spin_lock(&wdt_lock); /* Disable reset on watchdog */ - reg = readl(CPU_RESET_MASK); - reg &= ~WDT_RESET; - writel(reg, CPU_RESET_MASK); + reg = readl(RSTOUTn_MASK); + reg &= ~WDT_RESET_OUT_EN; + writel(reg, RSTOUTn_MASK); /* Disable watchdog timer */ reg = readl(TIMER_CTRL); @@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void) spin_unlock(&wdt_lock); } -static int orion5x_wdt_get_timeleft(int *time_left) +static int orion_wdt_get_timeleft(int *time_left) { spin_lock(&wdt_lock); *time_left = readl(WDT_VAL) / wdt_tclk; @@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left) return 0; } -static int orion5x_wdt_open(struct inode *inode, struct file *file) +static int orion_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - orion5x_wdt_enable(); + orion_wdt_enable(); return nonseekable_open(inode, file); } -static ssize_t orion5x_wdt_write(struct file *file, const char *data, +static ssize_t orion_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) { if (len) { @@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data, set_bit(WDT_OK_TO_CLOSE, &wdt_status); } } - orion5x_wdt_ping(); + orion_wdt_ping(); } return len; } -static int orion5x_wdt_settimeout(int new_time) +static int orion_wdt_settimeout(int new_time) { if ((new_time <= 0) || (new_time > wdt_max_duration)) return -EINVAL; /* Set new watchdog time to be used when - * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */ + * orion_wdt_enable() or orion_wdt_ping() is called. */ heartbeat = new_time; return 0; } @@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time) static const struct watchdog_info ident = { .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, - .identity = "Orion5x Watchdog", + .identity = "Orion Watchdog", }; -static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, +static long orion_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; @@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_KEEPALIVE: - orion5x_wdt_ping(); + orion_wdt_ping(); ret = 0; break; @@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, if (ret) break; - if (orion5x_wdt_settimeout(time)) { + if (orion_wdt_settimeout(time)) { ret = -EINVAL; break; } - orion5x_wdt_ping(); + orion_wdt_ping(); /* Fall through */ case WDIOC_GETTIMEOUT: @@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_GETTIMELEFT: - if (orion5x_wdt_get_timeleft(&time)) { + if (orion_wdt_get_timeleft(&time)) { ret = -EINVAL; break; } @@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd, return ret; } -static int orion5x_wdt_release(struct inode *inode, struct file *file) +static int orion_wdt_release(struct inode *inode, struct file *file) { if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) - orion5x_wdt_disable(); + orion_wdt_disable(); else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); @@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file) } -static const struct file_operations orion5x_wdt_fops = { +static const struct file_operations orion_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .write = orion5x_wdt_write, - .unlocked_ioctl = orion5x_wdt_ioctl, - .open = orion5x_wdt_open, - .release = orion5x_wdt_release, + .write = orion_wdt_write, + .unlocked_ioctl = orion_wdt_ioctl, + .open = orion_wdt_open, + .release = orion_wdt_release, }; -static struct miscdevice orion5x_wdt_miscdev = { +static struct miscdevice orion_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &orion5x_wdt_fops, + .fops = &orion_wdt_fops, }; -static int __devinit orion5x_wdt_probe(struct platform_device *pdev) +static int __devinit orion_wdt_probe(struct platform_device *pdev) { - struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data; + struct orion_wdt_platform_data *pdata = pdev->dev.platform_data; int ret; if (pdata) { wdt_tclk = pdata->tclk; } else { - printk(KERN_ERR "Orion5x Watchdog misses platform data\n"); + printk(KERN_ERR "Orion Watchdog misses platform data\n"); return -ENODEV; } - if (orion5x_wdt_miscdev.parent) + if (orion_wdt_miscdev.parent) return -EBUSY; - orion5x_wdt_miscdev.parent = &pdev->dev; + orion_wdt_miscdev.parent = &pdev->dev; wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk; - if (orion5x_wdt_settimeout(heartbeat)) + if (orion_wdt_settimeout(heartbeat)) heartbeat = wdt_max_duration; - ret = misc_register(&orion5x_wdt_miscdev); + ret = misc_register(&orion_wdt_miscdev); if (ret) return ret; - printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n", + printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n", heartbeat, nowayout ? ", nowayout" : ""); return 0; } -static int __devexit orion5x_wdt_remove(struct platform_device *pdev) +static int __devexit orion_wdt_remove(struct platform_device *pdev) { int ret; if (test_bit(WDT_IN_USE, &wdt_status)) { - orion5x_wdt_disable(); + orion_wdt_disable(); clear_bit(WDT_IN_USE, &wdt_status); } - ret = misc_deregister(&orion5x_wdt_miscdev); + ret = misc_deregister(&orion_wdt_miscdev); if (!ret) - orion5x_wdt_miscdev.parent = NULL; + orion_wdt_miscdev.parent = NULL; return ret; } -static void orion5x_wdt_shutdown(struct platform_device *pdev) +static void orion_wdt_shutdown(struct platform_device *pdev) { if (test_bit(WDT_IN_USE, &wdt_status)) - orion5x_wdt_disable(); + orion_wdt_disable(); } -static struct platform_driver orion5x_wdt_driver = { - .probe = orion5x_wdt_probe, - .remove = __devexit_p(orion5x_wdt_remove), - .shutdown = orion5x_wdt_shutdown, +static struct platform_driver orion_wdt_driver = { + .probe = orion_wdt_probe, + .remove = __devexit_p(orion_wdt_remove), + .shutdown = orion_wdt_shutdown, .driver = { .owner = THIS_MODULE, - .name = "orion5x_wdt", + .name = "orion_wdt", }, }; -static int __init orion5x_wdt_init(void) +static int __init orion_wdt_init(void) { spin_lock_init(&wdt_lock); - return platform_driver_register(&orion5x_wdt_driver); + return platform_driver_register(&orion_wdt_driver); } -static void __exit orion5x_wdt_exit(void) +static void __exit orion_wdt_exit(void) { - platform_driver_unregister(&orion5x_wdt_driver); + platform_driver_unregister(&orion_wdt_driver); } -module_init(orion5x_wdt_init); -module_exit(orion5x_wdt_exit); +module_init(orion_wdt_init); +module_exit(orion_wdt_exit); MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>"); -MODULE_DESCRIPTION("Orion5x Processor Watchdog"); +MODULE_DESCRIPTION("Orion Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); |