drivers:staging: ti-st: delete old bt_drv driver

point the new v7 driver to build if ST_BT is selected
in Makefile and delete the old bt_drv driver.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 1 insertions, 571 deletions

diff --git a/drivers/staging/ti-st/Makefile b/drivers/staging/ti-st/Makefile
index 5f11b82..9125462 100644
--- a/drivers/staging/ti-st/Makefile
+++ b/drivers/staging/ti-st/Makefile
@@ -2,4 +2,4 @@
 # Makefile for TI's shared transport line discipline
 # and its protocol drivers (BT, FM, GPS)
 #
-obj-$(CONFIG_ST_BT) 		+= bt_drv.o
+obj-$(CONFIG_ST_BT) 		+= btwilink.o
diff --git a/drivers/staging/ti-st/bt_drv.c b/drivers/staging/ti-st/bt_drv.c
deleted file mode 100644
index 75065bf..0000000
--- a/drivers/staging/ti-st/bt_drv.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- *  Texas Instrument's Bluetooth Driver For Shared Transport.
- *
- *  Bluetooth Driver acts as interface between HCI CORE and
- *  TI Shared Transport Layer.
- *
- *  Copyright (C) 2009 Texas Instruments
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-
-#include <linux/ti_wilink_st.h>
-#include "bt_drv.h"
-
-/* Define this macro to get debug msg */
-#undef DEBUG
-
-#ifdef DEBUG
-#define BT_DRV_DBG(fmt, arg...)  printk(KERN_INFO "(btdrv):"fmt"\n" , ## arg)
-#define BTDRV_API_START()        printk(KERN_INFO "(btdrv): %s Start\n", \
-	__func__)
-#define BTDRV_API_EXIT(errno)    printk(KERN_INFO "(btdrv): %s Exit(%d)\n", \
-	__func__, errno)
-#else
-#define BT_DRV_DBG(fmt, arg...)
-#define BTDRV_API_START()
-#define BTDRV_API_EXIT(errno)
-#endif
-
-#define BT_DRV_ERR(fmt, arg...)  printk(KERN_ERR "(btdrv):"fmt"\n" , ## arg)
-
-static int reset;
-static struct hci_st *hst;
-
-/* Increments HCI counters based on pocket ID (cmd,acl,sco) */
-static inline void hci_st_tx_complete(struct hci_st *hst, int pkt_type)
-{
-	struct hci_dev *hdev;
-
-	BTDRV_API_START();
-
-	hdev = hst->hdev;
-
-	/* Update HCI stat counters */
-	switch (pkt_type) {
-	case HCI_COMMAND_PKT:
-		hdev->stat.cmd_tx++;
-		break;
-
-	case HCI_ACLDATA_PKT:
-		hdev->stat.acl_tx++;
-		break;
-
-	case HCI_SCODATA_PKT:
-		hdev->stat.cmd_tx++;
-		break;
-	}
-
-	BTDRV_API_EXIT(0);
-}
-
-/* ------- Interfaces to Shared Transport ------ */
-
-/* Called by ST layer to indicate protocol registration completion
- * status.hci_st_open() function will wait for signal from this
- * API when st_register() function returns ST_PENDING.
- */
-static void hci_st_registration_completion_cb(void *priv_data, char data)
-{
-	struct hci_st *lhst = (struct hci_st *)priv_data;
-	BTDRV_API_START();
-
-	/* hci_st_open() function needs value of 'data' to know
-	 * the registration status(success/fail),So have a back
-	 * up of it.
-	 */
-	lhst->streg_cbdata = data;
-
-	/* Got a feedback from ST for BT driver registration
-	 * request.Wackup hci_st_open() function to continue
-	 * it's open operation.
-	 */
-	complete(&lhst->wait_for_btdrv_reg_completion);
-
-	BTDRV_API_EXIT(0);
-}
-
-/* Called by Shared Transport layer when receive data is
- * available */
-static long hci_st_receive(void *priv_data, struct sk_buff *skb)
-{
-	int err;
-	int len;
-	struct hci_st *lhst = (struct hci_st *)priv_data;
-
-	BTDRV_API_START();
-
-	err = 0;
-	len = 0;
-
-	if (skb == NULL) {
-		BT_DRV_ERR("Invalid SKB received from ST");
-		BTDRV_API_EXIT(-EFAULT);
-		return -EFAULT;
-	}
-	if (!lhst) {
-		kfree_skb(skb);
-		BT_DRV_ERR("Invalid hci_st memory,freeing SKB");
-		BTDRV_API_EXIT(-EFAULT);
-		return -EFAULT;
-	}
-	if (!test_bit(BT_DRV_RUNNING, &lhst->flags)) {
-		kfree_skb(skb);
-		BT_DRV_ERR("Device is not running,freeing SKB");
-		BTDRV_API_EXIT(-EINVAL);
-		return -EINVAL;
-	}
-
-	len = skb->len;
-	skb->dev = (struct net_device *)lhst->hdev;
-
-	/* Forward skb to HCI CORE layer */
-	err = hci_recv_frame(skb);
-	if (err) {
-		kfree_skb(skb);
-		BT_DRV_ERR("Unable to push skb to HCI CORE(%d),freeing SKB",
-			   err);
-		BTDRV_API_EXIT(err);
-		return err;
-	}
-	lhst->hdev->stat.byte_rx += len;
-
-	BTDRV_API_EXIT(0);
-	return 0;
-}
-
-/* ------- Interfaces to HCI layer ------ */
-
-/* Called from HCI core to initialize the device */
-static int hci_st_open(struct hci_dev *hdev)
-{
-	static struct st_proto_s hci_st_proto;
-	unsigned long timeleft;
-	int err;
-
-	BTDRV_API_START();
-
-	err = 0;
-
-	BT_DRV_DBG("%s %p", hdev->name, hdev);
-
-	/* Already registered with ST ? */
-	if (test_bit(BT_ST_REGISTERED, &hst->flags)) {
-		BT_DRV_ERR("Registered with ST already,open called again?");
-		BTDRV_API_EXIT(0);
-		return 0;
-	}
-
-	/* Populate BT driver info required by ST */
-	memset(&hci_st_proto, 0, sizeof(hci_st_proto));
-
-	/* BT driver ID */
-	hci_st_proto.type = ST_BT;
-
-	/* Receive function which called from ST */
-	hci_st_proto.recv = hci_st_receive;
-
-	/* Packet match function may used in future */
-	hci_st_proto.match_packet = NULL;
-
-	/* Callback to be called when registration is pending */
-	hci_st_proto.reg_complete_cb = hci_st_registration_completion_cb;
-
-	/* This is write function pointer of ST. BT driver will make use of this
-	 * for sending any packets to chip. ST will assign and give to us, so
-	 * make it as NULL */
-	hci_st_proto.write = NULL;
-
-	/* send in the hst to be received at registration complete callback
-	 * and during st's receive
-	 */
-	hci_st_proto.priv_data = hst;
-
-	/* Register with ST layer */
-	err = st_register(&hci_st_proto);
-	if (err == -EINPROGRESS) {
-		/* Prepare wait-for-completion handler data structures.
-		 * Needed to syncronize this and st_registration_completion_cb()
-		 * functions.
-		 */
-		init_completion(&hst->wait_for_btdrv_reg_completion);
-
-		/* Reset ST registration callback status flag , this value
-		 * will be updated in hci_st_registration_completion_cb()
-		 * function whenever it called from ST driver.
-		 */
-		hst->streg_cbdata = -EINPROGRESS;
-
-		/* ST is busy with other protocol registration(may be busy with
-		 * firmware download).So,Wait till the registration callback
-		 * (passed as a argument to st_register() function) getting
-		 * called from ST.
-		 */
-		BT_DRV_DBG(" %s waiting for reg completion signal from ST",
-			   __func__);
-
-		timeleft =
-		    wait_for_completion_timeout
-		    (&hst->wait_for_btdrv_reg_completion,
-		     msecs_to_jiffies(BT_REGISTER_TIMEOUT));
-		if (!timeleft) {
-			BT_DRV_ERR("Timeout(%ld sec),didn't get reg"
-				   "completion signal from ST",
-				   BT_REGISTER_TIMEOUT / 1000);
-			BTDRV_API_EXIT(-ETIMEDOUT);
-			return -ETIMEDOUT;
-		}
-
-		/* Is ST registration callback called with ERROR value? */
-		if (hst->streg_cbdata != 0) {
-			BT_DRV_ERR("ST reg completion CB called with invalid"
-				   "status %d", hst->streg_cbdata);
-			BTDRV_API_EXIT(-EAGAIN);
-			return -EAGAIN;
-		}
-		err = 0;
-	} else if (err == -1) {
-		BT_DRV_ERR("st_register failed %d", err);
-		BTDRV_API_EXIT(-EAGAIN);
-		return -EAGAIN;
-	}
-
-	/* Do we have proper ST write function? */
-	if (hci_st_proto.write != NULL) {
-		/* We need this pointer for sending any Bluetooth pkts */
-		hst->st_write = hci_st_proto.write;
-	} else {
-		BT_DRV_ERR("failed to get ST write func pointer");
-
-		/* Undo registration with ST */
-		err = st_unregister(ST_BT);
-		if (err < 0)
-			BT_DRV_ERR("st_unregister failed %d", err);
-
-		hst->st_write = NULL;
-		BTDRV_API_EXIT(-EAGAIN);
-		return -EAGAIN;
-	}
-
-	/* Registration with ST layer is completed successfully,
-	 * now chip is ready to accept commands from HCI CORE.
-	 * Mark HCI Device flag as RUNNING
-	 */
-	set_bit(HCI_RUNNING, &hdev->flags);
-
-	/* Registration with ST successful */
-	set_bit(BT_ST_REGISTERED, &hst->flags);
-
-	BTDRV_API_EXIT(err);
-	return err;
-}
-
-/* Close device */
-static int hci_st_close(struct hci_dev *hdev)
-{
-	int err;
-
-	BTDRV_API_START();
-
-	err = 0;
-
-	/* Unregister from ST layer */
-	if (test_and_clear_bit(BT_ST_REGISTERED, &hst->flags)) {
-		err = st_unregister(ST_BT);
-		if (err != 0) {
-			BT_DRV_ERR("st_unregister failed %d", err);
-			BTDRV_API_EXIT(-EBUSY);
-			return -EBUSY;
-		}
-	}
-
-	hst->st_write = NULL;
-
-	/* ST layer would have moved chip to inactive state.
-	 * So,clear HCI device RUNNING flag.
-	 */
-	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) {
-		BTDRV_API_EXIT(0);
-		return 0;
-	}
-
-	BTDRV_API_EXIT(err);
-	return err;
-}
-
-/* Called from HCI CORE , Sends frames to Shared Transport */
-static int hci_st_send_frame(struct sk_buff *skb)
-{
-	struct hci_dev *hdev;
-	struct hci_st *hst;
-	long len;
-
-	BTDRV_API_START();
-
-	if (skb == NULL) {
-		BT_DRV_ERR("Invalid skb received from HCI CORE");
-		BTDRV_API_EXIT(-ENOMEM);
-		return -ENOMEM;
-	}
-	hdev = (struct hci_dev *)skb->dev;
-	if (!hdev) {
-		BT_DRV_ERR("SKB received for invalid HCI Device (hdev=NULL)");
-		BTDRV_API_EXIT(-ENODEV);
-		return -ENODEV;
-	}
-	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
-		BT_DRV_ERR("Device is not running");
-		BTDRV_API_EXIT(-EBUSY);
-		return -EBUSY;
-	}
-
-	hst = (struct hci_st *)hdev->driver_data;
-
-	/* Prepend skb with frame type */
-	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
-
-	BT_DRV_DBG(" %s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
-		   skb->len);
-
-	/* Insert skb to shared transport layer's transmit queue.
-	 * Freeing skb memory is taken care in shared transport layer,
-	 * so don't free skb memory here.
-	 */
-	if (!hst->st_write) {
-		kfree_skb(skb);
-		BT_DRV_ERR(" Can't write to ST, st_write null?");
-		BTDRV_API_EXIT(-EAGAIN);
-		return -EAGAIN;
-	}
-	len = hst->st_write(skb);
-	if (len < 0) {
-		/* Something went wrong in st write , free skb memory */
-		kfree_skb(skb);
-		BT_DRV_ERR(" ST write failed (%ld)", len);
-		BTDRV_API_EXIT(-EAGAIN);
-		return -EAGAIN;
-	}
-
-	/* ST accepted our skb. So, Go ahead and do rest */
-	hdev->stat.byte_tx += len;
-	hci_st_tx_complete(hst, bt_cb(skb)->pkt_type);
-
-	BTDRV_API_EXIT(0);
-	return 0;
-}
-
-static void hci_st_destruct(struct hci_dev *hdev)
-{
-	BTDRV_API_START();
-
-	if (!hdev) {
-		BT_DRV_ERR("Destruct called with invalid HCI Device"
-			   "(hdev=NULL)");
-		BTDRV_API_EXIT(0);
-		return;
-	}
-
-	BT_DRV_DBG("%s", hdev->name);
-
-	/* free hci_st memory */
-	if (hdev->driver_data != NULL)
-		kfree(hdev->driver_data);
-
-	BTDRV_API_EXIT(0);
-	return;
-}
-
-/* Creates new HCI device */
-static int hci_st_register_dev(struct hci_st *hst)
-{
-	struct hci_dev *hdev;
-
-	BTDRV_API_START();
-
-	/* Initialize and register HCI device */
-	hdev = hci_alloc_dev();
-	if (!hdev) {
-		BT_DRV_ERR("Can't allocate HCI device");
-		BTDRV_API_EXIT(-ENOMEM);
-		return -ENOMEM;
-	}
-	BT_DRV_DBG(" HCI device allocated. hdev= %p", hdev);
-
-	hst->hdev = hdev;
-	hdev->bus = HCI_UART;
-	hdev->driver_data = hst;
-	hdev->open = hci_st_open;
-	hdev->close = hci_st_close;
-	hdev->flush = NULL;
-	hdev->send = hci_st_send_frame;
-	hdev->destruct = hci_st_destruct;
-	hdev->owner = THIS_MODULE;
-
-	if (reset)
-		set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
-
-	if (hci_register_dev(hdev) < 0) {
-		BT_DRV_ERR("Can't register HCI device");
-		hci_free_dev(hdev);
-		BTDRV_API_EXIT(-ENODEV);
-		return -ENODEV;
-	}
-
-	BT_DRV_DBG(" HCI device registered. hdev= %p", hdev);
-	BTDRV_API_EXIT(0);
-	return 0;
-}
-
-/* ------- Module Init interface ------ */
-
-static int __init bt_drv_init(void)
-{
-	int err;
-
-	BTDRV_API_START();
-
-	err = 0;
-
-	BT_DRV_DBG(" Bluetooth Driver Version %s", VERSION);
-
-	/* Allocate local resource memory */
-	hst = kzalloc(sizeof(struct hci_st), GFP_KERNEL);
-	if (!hst) {
-		BT_DRV_ERR("Can't allocate control structure");
-		BTDRV_API_EXIT(-ENFILE);
-		return -ENFILE;
-	}
-
-	/* Expose "hciX" device to user space */
-	err = hci_st_register_dev(hst);
-	if (err) {
-		/* Release local resource memory */
-		kfree(hst);
-
-		BT_DRV_ERR("Unable to expose hci0 device(%d)", err);
-		BTDRV_API_EXIT(err);
-		return err;
-	}
-	set_bit(BT_DRV_RUNNING, &hst->flags);
-
-	BTDRV_API_EXIT(err);
-	return err;
-}
-
-/* ------- Module Exit interface ------ */
-
-static void __exit bt_drv_exit(void)
-{
-	BTDRV_API_START();
-
-	/* Deallocate local resource's memory  */
-	if (hst) {
-		struct hci_dev *hdev = hst->hdev;
-
-		if (hdev == NULL) {
-			BT_DRV_ERR("Invalid hdev memory");
-			kfree(hst);
-		} else {
-			hci_st_close(hdev);
-			if (test_and_clear_bit(BT_DRV_RUNNING, &hst->flags)) {
-				/* Remove HCI device (hciX) created
-				 * in module init.
-				 */
-				hci_unregister_dev(hdev);
-
-				/* Free HCI device memory */
-				hci_free_dev(hdev);
-			}
-		}
-	}
-	BTDRV_API_EXIT(0);
-}
-
-module_init(bt_drv_init);
-module_exit(bt_drv_exit);
-
-/* ------ Module Info ------ */
-
-module_param(reset, bool, 0644);
-MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
-MODULE_AUTHOR("Raja Mani <raja_mani@ti.com>");
-MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION);
-MODULE_VERSION(VERSION);
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/ti-st/bt_drv.h b/drivers/staging/ti-st/bt_drv.h
deleted file mode 100644
index a0beebe..0000000
--- a/drivers/staging/ti-st/bt_drv.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  Texas Instrument's Bluetooth Driver For Shared Transport.
- *
- *  Bluetooth Driver acts as interface between HCI CORE and
- *  TI Shared Transport Layer.
- *
- *  Copyright (C) 2009 Texas Instruments
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef _BT_DRV_H
-#define _BT_DRV_H
-
-/* Bluetooth Driver Version */
-#define VERSION               "1.0"
-
-/* Defines number of seconds to wait for reg completion
- * callback getting called from ST (in case,registration
- * with ST returns PENDING status)
- */
-#define BT_REGISTER_TIMEOUT   msecs_to_jiffies(6000)	/* 6 sec */
-
-/* BT driver's local status */
-#define BT_DRV_RUNNING        0
-#define BT_ST_REGISTERED      1
-
-/* BT driver operation structure */
-struct hci_st {
-
-	/* hci device pointer which binds to bt driver */
-	struct hci_dev *hdev;
-
-	/* used locally,to maintain various BT driver status */
-	unsigned long flags;
-
-	/* to hold ST registration callback  status */
-	char streg_cbdata;
-
-	/* write function pointer of ST driver */
-	long (*st_write) (struct sk_buff *);
-
-	/* Wait on comepletion handler needed to synchronize
-	 * hci_st_open() and hci_st_registration_completion_cb()
-	 * functions.*/
-	struct completion wait_for_btdrv_reg_completion;
-};
-
-#endif