Merge branch 'bugzilla-13002' into release

22 files changed, 356 insertions, 165 deletions

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 781435d..5dd702c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1264,16 +1264,6 @@ acpi_add_single_object(struct acpi_device **child,
 	acpi_device_set_id(device, parent, handle, type);
 
 	/*
-	 * The ACPI device is attached to acpi handle before getting
-	 * the power/wakeup/peformance flags. Otherwise OS can't get
-	 * the corresponding ACPI device by the acpi handle in the course
-	 * of getting the power/wakeup/performance flags.
-	 */
-	result = acpi_device_set_context(device, type);
-	if (result)
-		goto end;
-
-	/*
 	 * Power Management
 	 * ----------------
 	 */
@@ -1303,6 +1293,8 @@ acpi_add_single_object(struct acpi_device **child,
 			goto end;
 	}
 
+	if ((result = acpi_device_set_context(device, type)))
+		goto end;
 
 	result = acpi_device_register(device, parent);
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 56b8a3f..9ac4e37 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -664,6 +664,8 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_sff_prereset(link, deadline);
 }
 
+static DEFINE_SPINLOCK(piix_lock);
+
 /**
  *	piix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -677,8 +679,9 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 
 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
-	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
+	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	unsigned int is_slave	= (adev->devno != 0);
 	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 	unsigned int slave_port	= 0x44;
@@ -708,6 +711,8 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (adev->class == ATA_DEV_ATA)
 		control |= 4;	/* PPE enable */
 
+	spin_lock_irqsave(&piix_lock, flags);
+
 	/* PIO configuration clears DTE unconditionally.  It will be
 	 * programmed in set_dmamode which is guaranteed to be called
 	 * after set_piomode if any DMA mode is available.
@@ -747,6 +752,8 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
 		pci_write_config_byte(dev, 0x48, udma_enable);
 	}
+
+	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
 /**
@@ -764,6 +771,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
 	u8 master_port		= ap->port_no ? 0x42 : 0x40;
 	u16 master_data;
 	u8 speed		= adev->dma_mode;
@@ -777,6 +785,8 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 			    { 2, 1 },
 			    { 2, 3 }, };
 
+	spin_lock_irqsave(&piix_lock, flags);
+
 	pci_read_config_word(dev, master_port, &master_data);
 	if (ap->udma_mask)
 		pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -867,6 +877,8 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 	/* Don't scribble on 0x48 if the controller does not support UDMA */
 	if (ap->udma_mask)
 		pci_write_config_byte(dev, 0x48, udma_enable);
+
+	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7537f57..5b4f87e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -222,6 +222,7 @@ typedef struct drm_i915_private {
 	unsigned int edp_support:1;
 	int lvds_ssc_freq;
 
+	int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
 	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
@@ -384,6 +385,9 @@ typedef struct drm_i915_private {
 		 */
 		struct list_head inactive_list;
 
+		/** LRU list of objects with fence regs on them. */
+		struct list_head fence_list;
+
 		/**
 		 * List of breadcrumbs associated with GPU requests currently
 		 * outstanding.
@@ -451,6 +455,9 @@ struct drm_i915_gem_object {
 	/** This object's place on the active/flushing/inactive lists */
 	struct list_head list;
 
+	/** This object's place on the fenced object LRU */
+	struct list_head fence_list;
+
 	/**
 	 * This is set if the object is on the active or flushing lists
 	 * (has pending rendering), and is not set if it's on inactive (ready
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 140bee1..0c07a75 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -978,6 +978,7 @@ int
 i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 			  struct drm_file *file_priv)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_set_domain *args = data;
 	struct drm_gem_object *obj;
 	uint32_t read_domains = args->read_domains;
@@ -1010,8 +1011,18 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 		 obj, obj->size, read_domains, write_domain);
 #endif
 	if (read_domains & I915_GEM_DOMAIN_GTT) {
+		struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
 		ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
 
+		/* Update the LRU on the fence for the CPU access that's
+		 * about to occur.
+		 */
+		if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+			list_move_tail(&obj_priv->fence_list,
+				       &dev_priv->mm.fence_list);
+		}
+
 		/* Silently promote "you're not bound, there was nothing to do"
 		 * to success, since the client was just asking us to
 		 * make sure everything was done.
@@ -1155,8 +1166,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	}
 
 	/* Need a new fence register? */
-	if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-	    obj_priv->tiling_mode != I915_TILING_NONE) {
+	if (obj_priv->tiling_mode != I915_TILING_NONE) {
 		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret) {
 			mutex_unlock(&dev->struct_mutex);
@@ -2208,6 +2218,12 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 	struct drm_i915_gem_object *old_obj_priv = NULL;
 	int i, ret, avail;
 
+	/* Just update our place in the LRU if our fence is getting used. */
+	if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+		list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+		return 0;
+	}
+
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
 		WARN(1, "allocating a fence for non-tiled object?\n");
@@ -2229,7 +2245,6 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 	}
 
 	/* First try to find a free reg */
-try_again:
 	avail = 0;
 	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
 		reg = &dev_priv->fence_regs[i];
@@ -2243,52 +2258,41 @@ try_again:
 
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
-		uint32_t seqno = dev_priv->mm.next_gem_seqno;
+		struct drm_gem_object *old_obj = NULL;
 
 		if (avail == 0)
 			return -ENOSPC;
 
-		for (i = dev_priv->fence_reg_start;
-		     i < dev_priv->num_fence_regs; i++) {
-			uint32_t this_seqno;
+		list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+				    fence_list) {
+			old_obj = old_obj_priv->obj;
 
-			reg = &dev_priv->fence_regs[i];
-			old_obj_priv = reg->obj->driver_private;
+			reg = &dev_priv->fence_regs[old_obj_priv->fence_reg];
 
 			if (old_obj_priv->pin_count)
 				continue;
 
+			/* Take a reference, as otherwise the wait_rendering
+			 * below may cause the object to get freed out from
+			 * under us.
+			 */
+			drm_gem_object_reference(old_obj);
+
 			/* i915 uses fences for GPU access to tiled buffers */
 			if (IS_I965G(dev) || !old_obj_priv->active)
 				break;
 
-			/* find the seqno of the first available fence */
-			this_seqno = old_obj_priv->last_rendering_seqno;
-			if (this_seqno != 0 &&
-			    reg->obj->write_domain == 0 &&
-			    i915_seqno_passed(seqno, this_seqno))
-				seqno = this_seqno;
-		}
-
-		/*
-		 * Now things get ugly... we have to wait for one of the
-		 * objects to finish before trying again.
-		 */
-		if (i == dev_priv->num_fence_regs) {
-			if (seqno == dev_priv->mm.next_gem_seqno) {
-				i915_gem_flush(dev,
-					       I915_GEM_GPU_DOMAINS,
-					       I915_GEM_GPU_DOMAINS);
-				seqno = i915_add_request(dev, NULL,
-							 I915_GEM_GPU_DOMAINS);
-				if (seqno == 0)
-					return -ENOMEM;
-			}
-
-			ret = i915_wait_request(dev, seqno);
-			if (ret)
+			/* This brings the object to the head of the LRU if it
+			 * had been written to.  The only way this should
+			 * result in us waiting longer than the expected
+			 * optimal amount of time is if there was a
+			 * fence-using buffer later that was read-only.
+			 */
+			i915_gem_object_flush_gpu_write_domain(old_obj);
+			ret = i915_gem_object_wait_rendering(old_obj);
+			if (ret != 0)
 				return ret;
-			goto try_again;
+			break;
 		}
 
 		/*
@@ -2296,10 +2300,15 @@ try_again:
 		 * for this object next time we need it.
 		 */
 		i915_gem_release_mmap(reg->obj);
+		i = old_obj_priv->fence_reg;
 		old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+		list_del_init(&old_obj_priv->fence_list);
+		drm_gem_object_unreference(old_obj);
 	}
 
 	obj_priv->fence_reg = i;
+	list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
 	reg->obj = obj;
 
 	if (IS_I965G(dev))
@@ -2342,6 +2351,7 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 
 	dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
+	list_del_init(&obj_priv->fence_list);
 }
 
 /**
@@ -3595,9 +3605,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 	 * Pre-965 chips need a fence register set up in order to
 	 * properly handle tiled surfaces.
 	 */
-	if (!IS_I965G(dev) &&
-	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-	    obj_priv->tiling_mode != I915_TILING_NONE) {
+	if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
 		ret = i915_gem_object_get_fence_reg(obj);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
@@ -3806,6 +3814,7 @@ int i915_gem_init_object(struct drm_gem_object *obj)
 	obj_priv->obj = obj;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
 	INIT_LIST_HEAD(&obj_priv->list);
+	INIT_LIST_HEAD(&obj_priv->fence_list);
 
 	return 0;
 }
@@ -4253,6 +4262,7 @@ i915_gem_load(struct drm_device *dev)
 	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
 	INIT_LIST_HEAD(&dev_priv->mm.request_list);
+	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
 	dev_priv->mm.next_gem_seqno = 1;
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 300aee3..f806fcc 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -59,6 +59,16 @@ find_section(struct bdb_header *bdb, int section_id)
 	return NULL;
 }
 
+static u16
+get_blocksize(void *p)
+{
+	u16 *block_ptr, block_size;
+
+	block_ptr = (u16 *)((char *)p - 2);
+	block_size = *block_ptr;
+	return block_size;
+}
+
 static void
 fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 			struct lvds_dvo_timing *dvo_timing)
@@ -215,6 +225,41 @@ parse_general_features(struct drm_i915_private *dev_priv,
 }
 
 static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+			  struct bdb_header *bdb)
+{
+	struct bdb_general_definitions *general;
+	const int crt_bus_map_table[] = {
+		GPIOB,
+		GPIOA,
+		GPIOC,
+		GPIOD,
+		GPIOE,
+		GPIOF,
+	};
+
+	/* Set sensible defaults in case we can't find the general block
+	   or it is the wrong chipset */
+	dev_priv->crt_ddc_bus = -1;
+
+	general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (general) {
+		u16 block_size = get_blocksize(general);
+		if (block_size >= sizeof(*general)) {
+			int bus_pin = general->crt_ddc_gmbus_pin;
+			DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+			if ((bus_pin >= 1) && (bus_pin <= 6)) {
+				dev_priv->crt_ddc_bus =
+					crt_bus_map_table[bus_pin-1];
+			}
+		} else {
+			DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+				  block_size);
+		}
+	}
+}
+
+static void
 parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 		       struct bdb_header *bdb)
 {
@@ -222,7 +267,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 	struct bdb_general_definitions *p_defs;
 	struct child_device_config *p_child;
 	int i, child_device_num, count;
-	u16	block_size, *block_ptr;
+	u16	block_size;
 
 	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
 	if (!p_defs) {
@@ -240,8 +285,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
 		return;
 	}
 	/* get the block size of general definitions */
-	block_ptr = (u16 *)((char *)p_defs - 2);
-	block_size = *block_ptr;
+	block_size = get_blocksize(p_defs);
 	/* get the number of child device */
 	child_device_num = (block_size - sizeof(*p_defs)) /
 				sizeof(*p_child);
@@ -362,6 +406,7 @@ intel_init_bios(struct drm_device *dev)
 
 	/* Grab useful general definitions */
 	parse_general_features(dev_priv, bdb);
+	parse_general_definitions(dev_priv, bdb);
 	parse_lfp_panel_data(dev_priv, bdb);
 	parse_sdvo_panel_data(dev_priv, bdb);
 	parse_sdvo_device_mapping(dev_priv, bdb);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4cf8e2e..590f81c 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -508,6 +508,7 @@ void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 i2c_reg;
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
@@ -527,8 +528,12 @@ void intel_crt_init(struct drm_device *dev)
 	/* Set up the DDC bus. */
 	if (IS_IGDNG(dev))
 		i2c_reg = PCH_GPIOA;
-	else
+	else {
 		i2c_reg = GPIOA;
+		/* Use VBT information for CRT DDC if available */
+		if (dev_priv->crt_ddc_bus != -1)
+			i2c_reg = dev_priv->crt_ddc_bus;
+	}
 	intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
 	if (!intel_output->ddc_bus) {
 		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
@@ -537,6 +542,10 @@ void intel_crt_init(struct drm_device *dev)
 	}
 
 	intel_output->type = INTEL_OUTPUT_ANALOG;
+	intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+				   (1 << INTEL_ANALOG_CLONE_BIT) |
+				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d6fce21..3fadb53 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -666,7 +666,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	intel_clock_t clock;
 	int err = target;
 
-	if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
 	    (I915_READ(LVDS)) != 0) {
 		/*
 		 * For LVDS, if the panel is on, just rely on its current
@@ -2396,7 +2396,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		if (is_sdvo) {
 			dpll |= DPLL_DVO_HIGH_SPEED;
 			sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
-			if (IS_I945G(dev) || IS_I945GM(dev))
+			if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
 			else if (IS_IGDNG(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
@@ -3170,7 +3170,7 @@ static int intel_connector_clones(struct drm_device *dev, int type_mask)
 
         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct intel_output *intel_output = to_intel_output(connector);
-		if (type_mask & (1 << intel_output->type))
+		if (type_mask & intel_output->clone_mask)
 			index_mask |= (1 << entry);
 		entry++;
 	}
@@ -3218,30 +3218,30 @@ static void intel_setup_outputs(struct drm_device *dev)
 			intel_dp_init(dev, PCH_DP_D);
 
 	} else if (IS_I9XX(dev)) {
-		int found;
-		u32 reg;
+		bool found = false;
 
 		if (I915_READ(SDVOB) & SDVO_DETECTED) {
 			found = intel_sdvo_init(dev, SDVOB);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOB);
+
 			if (!found && SUPPORTS_INTEGRATED_DP(dev))
 				intel_dp_init(dev, DP_B);
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
-		if (IS_G4X(dev))
-			reg = SDVOC;
-		else
-			reg = SDVOB;
 
-		if (I915_READ(reg) & SDVO_DETECTED) {
+		if (I915_READ(SDVOB) & SDVO_DETECTED)
 			found = intel_sdvo_init(dev, SDVOC);
-			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+			if (SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOC);
-			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+			if (SUPPORTS_INTEGRATED_DP(dev))
 				intel_dp_init(dev, DP_C);
 		}
+
 		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
 			intel_dp_init(dev, DP_D);
 	} else
@@ -3253,51 +3253,10 @@ static void intel_setup_outputs(struct drm_device *dev)
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct intel_output *intel_output = to_intel_output(connector);
 		struct drm_encoder *encoder = &intel_output->enc;
-		int crtc_mask = 0, clone_mask = 0;
 
-		/* valid crtcs */
-		switch(intel_output->type) {
-		case INTEL_OUTPUT_HDMI:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_HDMI));
-			break;
-		case INTEL_OUTPUT_DVO:
-		case INTEL_OUTPUT_SDVO:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-				      (1 << INTEL_OUTPUT_DVO) |
-				      (1 << INTEL_OUTPUT_SDVO));
-			break;
-		case INTEL_OUTPUT_ANALOG:
-			crtc_mask = ((1 << 0)|
-				     (1 << 1));
-			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
-				      (1 << INTEL_OUTPUT_DVO) |
-				      (1 << INTEL_OUTPUT_SDVO));
-			break;
-		case INTEL_OUTPUT_LVDS:
-			crtc_mask = (1 << 1);
-			clone_mask = (1 << INTEL_OUTPUT_LVDS);
-			break;
-		case INTEL_OUTPUT_TVOUT:
-			crtc_mask = ((1 << 0) |
-				     (1 << 1));
-			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
-			break;
-		case INTEL_OUTPUT_DISPLAYPORT:
-			crtc_mask = ((1 << 0) |
-				     (1 << 1));
-			clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
-			break;
-		case INTEL_OUTPUT_EDP:
-			crtc_mask = (1 << 1);
-			clone_mask = (1 << INTEL_OUTPUT_EDP);
-			break;
-		}
-		encoder->possible_crtcs = crtc_mask;
-		encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+		encoder->possible_crtcs = intel_output->crtc_mask;
+		encoder->possible_clones = intel_connector_clones(dev,
+						intel_output->clone_mask);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a6ff15a..f2afc4a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1254,6 +1254,18 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	else
 		intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
 
+	if (output_reg == DP_B)
+		intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+	else if (output_reg == DP_C)
+		intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+	else if (output_reg == DP_D)
+		intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+	if (IS_eDP(intel_output)) {
+		intel_output->crtc_mask = (1 << 1);
+		intel_output->clone_mask = (1 << INTEL_OUTPUT_EDP);
+	} else
+		intel_output->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d6f92ea..25aa6fa 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -57,6 +57,24 @@
 #define INTEL_OUTPUT_DISPLAYPORT 7
 #define INTEL_OUTPUT_EDP 8
 
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
 #define INTEL_DVO_CHIP_TMDS 2
@@ -86,6 +104,8 @@ struct intel_output {
 	bool needs_tv_clock;
 	void *dev_priv;
 	void (*hot_plug)(struct intel_output *);
+	int crtc_mask;
+	int clone_mask;
 };
 
 struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 13bff20..a4d2606 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -435,14 +435,20 @@ void intel_dvo_init(struct drm_device *dev)
 			continue;
 
 		intel_output->type = INTEL_OUTPUT_DVO;
+		intel_output->crtc_mask = (1 << 0) | (1 << 1);
 		switch (dvo->type) {
 		case INTEL_DVO_CHIP_TMDS:
+			intel_output->clone_mask =
+				(1 << INTEL_DVO_TMDS_CLONE_BIT) |
+				(1 << INTEL_ANALOG_CLONE_BIT);
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_DVII);
 			encoder_type = DRM_MODE_ENCODER_TMDS;
 			break;
 		case INTEL_DVO_CHIP_LVDS:
+			intel_output->clone_mask =
+				(1 << INTEL_DVO_LVDS_CLONE_BIT);
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_LVDS);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 1842290..fa304e1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -230,22 +230,28 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 
 	/* Set up the DDC bus. */
-	if (sdvox_reg == SDVOB)
+	if (sdvox_reg == SDVOB) {
+		intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
-	else if (sdvox_reg == SDVOC)
+	} else if (sdvox_reg == SDVOC) {
+		intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
-	else if (sdvox_reg == HDMIB)
+	} else if (sdvox_reg == HDMIB) {
+		intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
 								"HDMIB");
-	else if (sdvox_reg == HDMIC)
+	} else if (sdvox_reg == HDMIC) {
+		intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
 								"HDMIC");
-	else if (sdvox_reg == HDMID)
+	} else if (sdvox_reg == HDMID) {
+		intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
 		intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
 								"HDMID");
-
+	}
 	if (!intel_output->ddc_bus)
 		goto err_connector;
 
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 3f445a8..8df02ef 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -916,6 +916,8 @@ void intel_lvds_init(struct drm_device *dev)
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
 	intel_output->type = INTEL_OUTPUT_LVDS;
 
+	intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+	intel_output->crtc_mask = (1 << 1);
 	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
 	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 5371d93..d3b74ba 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1458,7 +1458,7 @@ intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
 		(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
 		caps++;
 	if (sdvo_priv->caps.output_flags &
-		(SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+		(SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
 		caps++;
 	if (sdvo_priv->caps.output_flags &
 		(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
@@ -1967,6 +1967,9 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
 			intel_sdvo_set_colorimetry(intel_output,
 						   SDVO_COLORIMETRY_RGB256);
 			connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+			intel_output->clone_mask =
+					(1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+					(1 << INTEL_ANALOG_CLONE_BIT);
 		}
 	} else if (flags & SDVO_OUTPUT_SVID0) {
 
@@ -1975,11 +1978,14 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
 		connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
 		sdvo_priv->is_tv = true;
 		intel_output->needs_tv_clock = true;
+		intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
 	} else if (flags & SDVO_OUTPUT_RGB0) {
 
 		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
 		encoder->encoder_type = DRM_MODE_ENCODER_DAC;
 		connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+		intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+					(1 << INTEL_ANALOG_CLONE_BIT);
 	} else if (flags & SDVO_OUTPUT_RGB1) {
 
 		sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
@@ -1991,12 +1997,16 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
 		encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
 		connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
 		sdvo_priv->is_lvds = true;
+		intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+					(1 << INTEL_SDVO_LVDS_CLONE_BIT);
 	} else if (flags & SDVO_OUTPUT_LVDS1) {
 
 		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
 		encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
 		connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
 		sdvo_priv->is_lvds = true;
+		intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+					(1 << INTEL_SDVO_LVDS_CLONE_BIT);
 	} else {
 
 		unsigned char bytes[2];
@@ -2009,6 +2019,7 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
 				  bytes[0], bytes[1]);
 		ret = false;
 	}
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 
 	if (ret && registered)
 		ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index da4ab4d..2fbe13a 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1718,6 +1718,7 @@ intel_tv_init(struct drm_device *dev)
 	if (!intel_output) {
 		return;
 	}
+
 	connector = &intel_output->base;
 
 	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
@@ -1729,6 +1730,7 @@ intel_tv_init(struct drm_device *dev)
 	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
 	tv_priv = (struct intel_tv_priv *)(intel_output + 1);
 	intel_output->type = INTEL_OUTPUT_TVOUT;
+	intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
 	intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
 	intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
 	intel_output->dev_priv = tv_priv;
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index 88847d1..8c1aed7 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -2,25 +2,33 @@
 # Siano Mobile Silicon Digital TV device configuration
 #
 
-config DVB_SIANO_SMS1XXX
-	tristate "Siano SMS1XXX USB dongle support"
-	depends on DVB_CORE && USB && INPUT
+config SMS_SIANO_MDTV
+	tristate "Siano SMS1xxx based MDTV receiver"
+	depends on DVB_CORE && INPUT
 	---help---
-	  Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called sms1xxx.
+	  To compile this driver as a module, choose M here
+	  (The module will be called smsmdtv).
 
-config DVB_SIANO_SMS1XXX_SMS_IDS
-	bool "Enable support for Siano Mobile Silicon default USB IDs"
-	depends on DVB_SIANO_SMS1XXX
-	default y
-	---help---
-	  Choose Y here if you have a USB dongle with a SMS1XXX chipset
-	  that uses Siano Mobile Silicon's default usb vid:pid.
+	  Further documentation on this driver can be found on the WWW
+	  at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
 
-	  Choose N here if you would prefer to use Siano's external driver.
+# Hardware interfaces support
 
-	  Further documentation on this driver can be found on the WWW at
-	  <http://www.siano-ms.com/>.
+config SMS_USB_DRV
+	tristate "USB interface support"
+	depends on DVB_CORE && USB
+	---help---
+	  Choose if you would like to have Siano's support for USB interface
 
+config SMS_SDIO_DRV
+	tristate "SDIO interface support"
+	depends on DVB_CORE && MMC
+	---help---
+	  Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
index c6644d9..c54140b 100644
--- a/drivers/media/dvb/siano/Makefile
+++ b/drivers/media/dvb/siano/Makefile
@@ -1,8 +1,9 @@
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
 
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
 
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 3ee1c39..266033a 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -325,6 +325,16 @@ static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client,
 						0 : -ETIME;
 }
 
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+	if (client->fe_status & FE_HAS_LOCK)
+		return sms_board_led_feedback(client->coredev,
+			(client->sms_stat_dvb.ReceptionData.BER
+			== 0) ? SMS_LED_HI : SMS_LED_LO);
+	else
+		return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
 static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 {
 	struct smsdvb_client_t *client;
@@ -332,6 +342,8 @@ static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 
 	*stat = client->fe_status;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -342,6 +354,8 @@ static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber)
 
 	*ber = client->sms_stat_dvb.ReceptionData.BER;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -359,6 +373,8 @@ static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 				(client->sms_stat_dvb.ReceptionData.InBandPwr
 				+ 95) * 3 / 2;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -369,6 +385,8 @@ static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr)
 
 	*snr = client->sms_stat_dvb.ReceptionData.SNR;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -379,6 +397,8 @@ static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 
 	*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
 
+	led_feedback(client);
+
 	return 0;
 }
 
@@ -404,6 +424,8 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 		u32		Data[3];
 	} Msg;
 
+	int ret;
+
 	client->fe_status = FE_HAS_SIGNAL;
 	client->event_fe_state = -1;
 	client->event_unc_state = -1;
@@ -426,6 +448,23 @@ static int smsdvb_set_frontend(struct dvb_frontend *fe,
 	case BANDWIDTH_AUTO: return -EOPNOTSUPP;
 	default: return -EINVAL;
 	}
+	/* Disable LNA, if any. An error is returned if no LNA is present */
+	ret = sms_board_lna_control(client->coredev, 0);
+	if (ret == 0) {
+		fe_status_t status;
+
+		/* tune with LNA off at first */
+		ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+						  &client->tune_done);
+
+		smsdvb_read_status(fe, &status);
+
+		if (status & FE_HAS_LOCK)
+			return ret;
+
+		/* previous tune didnt lock - enable LNA and tune again */
+		sms_board_lna_control(client->coredev, 1);
+	}
 
 	return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
 					   &client->tune_done);
@@ -451,6 +490,8 @@ static int smsdvb_init(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
+	sms_board_power(client->coredev, 1);
+
 	sms_board_dvb3_event(client, DVB3_EVENT_INIT);
 	return 0;
 }
@@ -460,6 +501,9 @@ static int smsdvb_sleep(struct dvb_frontend *fe)
 	struct smsdvb_client_t *client =
 		container_of(fe, struct smsdvb_client_t, frontend);
 
+	sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+	sms_board_power(client->coredev, 0);
+
 	sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
 
 	return 0;
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
index dfaa49a..d1d652e 100644
--- a/drivers/media/dvb/siano/smssdio.c
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -46,6 +46,7 @@
 
 #define SMSSDIO_DATA		0x00
 #define SMSSDIO_INT		0x04
+#define SMSSDIO_BLOCK_SIZE	128
 
 static const struct sdio_device_id smssdio_ids[] = {
 	{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
@@ -85,7 +86,8 @@ static int smssdio_sendrequest(void *context, void *buffer, size_t size)
 	sdio_claim_host(smsdev->func);
 
 	while (size >= smsdev->func->cur_blksize) {
-		ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+					buffer, smsdev->func->cur_blksize);
 		if (ret)
 			goto out;
 
@@ -94,8 +96,8 @@ static int smssdio_sendrequest(void *context, void *buffer, size_t size)
 	}
 
 	if (size) {
-		ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
-				       buffer, size);
+		ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+					buffer, size);
 	}
 
 out:
@@ -125,23 +127,23 @@ static void smssdio_interrupt(struct sdio_func *func)
 	 */
 	isr = sdio_readb(func, SMSSDIO_INT, &ret);
 	if (ret) {
-		dev_err(&smsdev->func->dev,
-			"Unable to read interrupt register!\n");
+		sms_err("Unable to read interrupt register!\n");
 		return;
 	}
 
 	if (smsdev->split_cb == NULL) {
 		cb = smscore_getbuffer(smsdev->coredev);
 		if (!cb) {
-			dev_err(&smsdev->func->dev,
-				"Unable to allocate data buffer!\n");
+			sms_err("Unable to allocate data buffer!\n");
 			return;
 		}
 
-		ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+		ret = sdio_memcpy_fromio(smsdev->func,
+					 cb->p,
+					 SMSSDIO_DATA,
+					 SMSSDIO_BLOCK_SIZE);
 		if (ret) {
-			dev_err(&smsdev->func->dev,
-				"Error %d reading initial block!\n", ret);
+			sms_err("Error %d reading initial block!\n", ret);
 			return;
 		}
 
@@ -152,7 +154,10 @@ static void smssdio_interrupt(struct sdio_func *func)
 			return;
 		}
 
-		size = hdr->msgLength - smsdev->func->cur_blksize;
+		if (hdr->msgLength > smsdev->func->cur_blksize)
+			size = hdr->msgLength - smsdev->func->cur_blksize;
+		else
+			size = 0;
 	} else {
 		cb = smsdev->split_cb;
 		hdr = cb->p;
@@ -162,23 +167,24 @@ static void smssdio_interrupt(struct sdio_func *func)
 		smsdev->split_cb = NULL;
 	}
 
-	if (hdr->msgLength > smsdev->func->cur_blksize) {
+	if (size) {
 		void *buffer;
 
-		size = ALIGN(size, 128);
-		buffer = cb->p + hdr->msgLength;
+		buffer = cb->p + (hdr->msgLength - size);
+		size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
 
-		BUG_ON(smsdev->func->cur_blksize != 128);
+		BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
 
 		/*
 		 * First attempt to transfer all of it in one go...
 		 */
-		ret = sdio_read_blocks(smsdev->func, buffer,
-				       SMSSDIO_DATA, size / 128);
+		ret = sdio_memcpy_fromio(smsdev->func,
+					 buffer,
+					 SMSSDIO_DATA,
+					 size);
 		if (ret && ret != -EINVAL) {
 			smscore_putbuffer(smsdev->coredev, cb);
-			dev_err(&smsdev->func->dev,
-				"Error %d reading data from card!\n", ret);
+			sms_err("Error %d reading data from card!\n", ret);
 			return;
 		}
 
@@ -191,12 +197,12 @@ static void smssdio_interrupt(struct sdio_func *func)
 		 */
 		if (ret == -EINVAL) {
 			while (size) {
-				ret = sdio_read_blocks(smsdev->func,
-						       buffer, SMSSDIO_DATA, 1);
+				ret = sdio_memcpy_fromio(smsdev->func,
+						  buffer, SMSSDIO_DATA,
+						  smsdev->func->cur_blksize);
 				if (ret) {
 					smscore_putbuffer(smsdev->coredev, cb);
-					dev_err(&smsdev->func->dev,
-						"Error %d reading "
+					sms_err("Error %d reading "
 						"data from card!\n", ret);
 					return;
 				}
@@ -269,7 +275,7 @@ static int smssdio_probe(struct sdio_func *func,
 	if (ret)
 		goto release;
 
-	ret = sdio_set_block_size(func, 128);
+	ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
 	if (ret)
 		goto disable;
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ed281f5..1c2e544 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1730,6 +1730,25 @@ static inline void em28xx_set_model(struct em28xx *dev)
 				       EM28XX_I2C_FREQ_100_KHZ;
 }
 
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+	int i;
+	unsigned char regs[][3] = {
+		{ 0x0d, 0x00, 0x01, },  /* reset and use defaults */
+		{ 0x0d, 0x00, 0x00, },
+		{ 0x0a, 0x00, 0x21, },
+		{ 0x21, 0x04, 0x00, },  /* full readout speed, no row/col skipping */
+	};
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+	return 0;
+}
+
+
 /* FIXME: Should be replaced by a proper mt9m001 driver */
 static int em28xx_initialize_mt9m001(struct em28xx *dev)
 {
@@ -1758,7 +1777,7 @@ static int em28xx_initialize_mt9m001(struct em28xx *dev)
 
 /* HINT method: webcam I2C chips
  *
- * This method work for webcams with Micron sensors
+ * This method works for webcams with Micron sensors
  */
 static int em28xx_hint_sensor(struct em28xx *dev)
 {
@@ -1804,6 +1823,23 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 		dev->vinctl = 0x00;
 
 		break;
+
+	case 0x143a:    /* MT9M111 as found in the ECS G200 */
+		dev->model = EM2750_BOARD_UNKNOWN;
+		em28xx_set_model(dev);
+
+		sensor_name = "mt9m111";
+		dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+		dev->em28xx_sensor = EM28XX_MT9M111;
+		em28xx_initialize_mt9m111(dev);
+		dev->sensor_xres = 640;
+		dev->sensor_yres = 512;
+
+		dev->vinmode = 0x0a;
+		dev->vinctl = 0x00;
+
+		break;
+
 	case 0x8431:
 		dev->model = EM2750_BOARD_UNKNOWN;
 		em28xx_set_model(dev);
@@ -1820,7 +1856,7 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 
 		break;
 	default:
-		printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
+		printk("Unknown Micron Sensor 0x%04x\n", version);
 		return -EINVAL;
 	}
 
@@ -2346,7 +2382,9 @@ void em28xx_card_setup(struct em28xx *dev)
 	}
 
 	em28xx_tuner_setup(dev);
-	em28xx_ir_init(dev);
+
+	if(!disable_ir)
+		em28xx_ir_init(dev);
 }
 
 
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8c2dc38..a2add61 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -367,6 +367,7 @@ enum em28xx_sensor {
 	EM28XX_NOSENSOR = 0,
 	EM28XX_MT9V011,
 	EM28XX_MT9M001,
+	EM28XX_MT9M111,
 };
 
 enum em28xx_adecoder {
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34f46f2..e994dca 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -114,7 +114,7 @@ config USB_GSPCA_SN9C20X
 
 config USB_GSPCA_SN9C20X_EVDEV
        bool "Enable evdev support"
-       depends on USB_GSPCA_SN9C20X
+	depends on USB_GSPCA_SN9C20X && INPUT
        ---help---
 	 Say Y here in order to enable evdev support for sn9c20x webcam button.
 
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index fc976f4..2622a6e 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -695,7 +695,7 @@ static int zr364xx_release(struct file *file)
 	for (i = 0; i < 2; i++) {
 		err =
 		    send_control_msg(udev, 1, init[cam->method][i].value,
-				     0, init[i][cam->method].bytes,
+				     0, init[cam->method][i].bytes,
 				     init[cam->method][i].size);
 		if (err < 0) {
 			dev_err(&udev->dev, "error during release sequence\n");