diff options
author | Krzysztof Hałasa <khalasa@piap.pl> | 2011-02-11 12:32:11 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-02-18 20:37:03 (GMT) |
commit | 908113d8ebd26fea48e0d7b6e78b67ae6fc735ac (patch) | |
tree | ffeb214ba6c048c4d8f247631215a1abeb64f742 /drivers | |
parent | 856e22d3cd3c38399be796b80bcf57769eefeee3 (diff) | |
download | linux-fsl-qoriq-908113d8ebd26fea48e0d7b6e78b67ae6fc735ac.tar.xz |
staging: Solo6x10: Add support for SOLO6110 chip.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/staging/solo6x10/solo6010-core.c | 40 | ||||
-rw-r--r-- | drivers/staging/solo6x10/solo6010-enc.c | 27 | ||||
-rw-r--r-- | drivers/staging/solo6x10/solo6010-p2m.c | 16 | ||||
-rw-r--r-- | drivers/staging/solo6x10/solo6010-registers.h | 40 | ||||
-rw-r--r-- | drivers/staging/solo6x10/solo6010-v4l2-enc.c | 86 | ||||
-rw-r--r-- | drivers/staging/solo6x10/solo6010.h | 4 |
6 files changed, 181 insertions, 32 deletions
diff --git a/drivers/staging/solo6x10/solo6010-core.c b/drivers/staging/solo6x10/solo6010-core.c index c433136..c713a74 100644 --- a/drivers/staging/solo6x10/solo6010-core.c +++ b/drivers/staging/solo6x10/solo6010-core.c @@ -136,6 +136,7 @@ static int __devinit solo6010_pci_probe(struct pci_dev *pdev, int ret; int sdram; u8 chip_id; + u32 reg; solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL); if (solo_dev == NULL) @@ -181,14 +182,43 @@ static int __devinit solo6010_pci_probe(struct pci_dev *pdev, solo_dev->nr_ext = 1; } + solo_dev->flags = id->driver_data; + /* Disable all interrupts to start */ solo6010_irq_off(solo_dev, ~0); + reg = SOLO_SYS_CFG_SDRAM64BIT; /* Initial global settings */ - solo_reg_write(solo_dev, SOLO_SYS_CFG, SOLO_SYS_CFG_SDRAM64BIT | - SOLO_SYS_CFG_INPUTDIV(25) | - SOLO_SYS_CFG_FEEDBACKDIV((SOLO_CLOCK_MHZ * 2) - 2) | - SOLO_SYS_CFG_OUTDIV(3)); + if (!(solo_dev->flags & FLAGS_6110)) + reg |= SOLO6010_SYS_CFG_INPUTDIV(25) | + SOLO6010_SYS_CFG_FEEDBACKDIV((SOLO_CLOCK_MHZ * 2) - 2) | + SOLO6010_SYS_CFG_OUTDIV(3); + solo_reg_write(solo_dev, SOLO_SYS_CFG, reg); + + if (solo_dev->flags & FLAGS_6110) { + u32 sys_clock_MHz = SOLO_CLOCK_MHZ; + u32 pll_DIVQ; + u32 pll_DIVF; + + if (sys_clock_MHz < 125) { + pll_DIVQ = 3; + pll_DIVF = (sys_clock_MHz * 4) / 3; + } else { + pll_DIVQ = 2; + pll_DIVF = (sys_clock_MHz * 2) / 3; + } + + solo_reg_write(solo_dev, SOLO6110_PLL_CONFIG, + SOLO6110_PLL_RANGE_5_10MHZ | + SOLO6110_PLL_DIVR(9) | + SOLO6110_PLL_DIVQ_EXP(pll_DIVQ) | + SOLO6110_PLL_DIVF(pll_DIVF) | SOLO6110_PLL_FSEN); + mdelay(1); // PLL Locking time (1ms) + + solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 3 << 8); /* ? */ + } else + solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 1 << 8); /* ? */ + solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM, SOLO_CLOCK_MHZ - 1); /* PLL locking time of 1ms */ @@ -264,6 +294,8 @@ static void __devexit solo6010_pci_remove(struct pci_dev *pdev) static struct pci_device_id solo6010_id_table[] = { /* 6010 based cards */ {PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010)}, + {PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6110), + .driver_data = FLAGS_6110}, {PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4)}, {PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9)}, {PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16)}, diff --git a/drivers/staging/solo6x10/solo6010-enc.c b/drivers/staging/solo6x10/solo6010-enc.c index 7e28f7d..743734d 100644 --- a/drivers/staging/solo6x10/solo6010-enc.c +++ b/drivers/staging/solo6x10/solo6010-enc.c @@ -155,19 +155,26 @@ int solo_osd_print(struct solo_enc_dev *solo_enc) static void solo_jpeg_config(struct solo6010_dev *solo_dev) { - solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL, - (2 << 24) | (2 << 16) | (2 << 8) | (2 << 0)); + u32 reg; + if (solo_dev->flags & FLAGS_6110) + reg = (4 << 24) | (3 << 16) | (2 << 8) | (1 << 0); + else + reg = (2 << 24) | (2 << 16) | (2 << 8) | (2 << 0); + solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL, reg); solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_L, 0); solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_H, 0); solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG, (SOLO_JPEG_EXT_SIZE(solo_dev) & 0xffff0000) | ((SOLO_JPEG_EXT_ADDR(solo_dev) >> 16) & 0x0000ffff)); solo_reg_write(solo_dev, SOLO_VE_JPEG_CTRL, 0xffffffff); + /* que limit, samp limit, pos limit */ + solo_reg_write(solo_dev, 0x0688, (0 << 16) | (30 << 8) | 60); } static void solo_mp4e_config(struct solo6010_dev *solo_dev) { int i; + u32 reg; /* We can only use VE_INTR_CTRL(0) if we want to support mjpeg */ solo_reg_write(solo_dev, SOLO_VE_CFG0, @@ -184,17 +191,21 @@ static void solo_mp4e_config(struct solo6010_dev *solo_dev) solo_reg_write(solo_dev, SOLO_VE_ENCRYP_POLY, 0); solo_reg_write(solo_dev, SOLO_VE_ENCRYP_INIT, 0); - solo_reg_write(solo_dev, SOLO_VE_ATTR, - SOLO_VE_LITTLE_ENDIAN | - SOLO_COMP_ATTR_FCODE(1) | - SOLO_COMP_TIME_INC(0) | - SOLO_COMP_TIME_WIDTH(15) | - SOLO_DCT_INTERVAL(36 / 4)); + reg = SOLO_VE_LITTLE_ENDIAN | SOLO_COMP_ATTR_FCODE(1) | + SOLO_COMP_TIME_INC(0) | SOLO_COMP_TIME_WIDTH(15); + if (solo_dev->flags & FLAGS_6110) + reg |= SOLO_DCT_INTERVAL(10); + else + reg |= SOLO_DCT_INTERVAL(36 / 4); + solo_reg_write(solo_dev, SOLO_VE_ATTR, reg); for (i = 0; i < solo_dev->nr_chans; i++) solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE(i), (SOLO_EREF_EXT_ADDR(solo_dev) + (i * SOLO_EREF_EXT_SIZE)) >> 16); + + if (solo_dev->flags & FLAGS_6110) + solo_reg_write(solo_dev, 0x0634, 0x00040008); /* ? */ } int solo_enc_init(struct solo6010_dev *solo_dev) diff --git a/drivers/staging/solo6x10/solo6010-p2m.c b/drivers/staging/solo6x10/solo6010-p2m.c index 956dea0..90de963 100644 --- a/drivers/staging/solo6x10/solo6010-p2m.c +++ b/drivers/staging/solo6x10/solo6010-p2m.c @@ -66,18 +66,18 @@ int solo_p2m_dma_t(struct solo6010_dev *solo_dev, u8 id, int wr, void solo_p2m_push_desc(struct p2m_desc *desc, int wr, dma_addr_t dma_addr, u32 ext_addr, u32 size, int repeat, u32 ext_size) { - desc->ta = dma_addr; - desc->fa = ext_addr; + desc->ta = cpu_to_le32(dma_addr); + desc->fa = cpu_to_le32(ext_addr); - desc->ext = SOLO_P2M_COPY_SIZE(size >> 2); - desc->ctrl = SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) | - (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON; + desc->ext = cpu_to_le32(SOLO_P2M_COPY_SIZE(size >> 2)); + desc->ctrl = cpu_to_le32(SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) | + (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON); /* Ext size only matters when we're repeating */ if (repeat) { - desc->ext |= SOLO_P2M_EXT_INC(ext_size >> 2); - desc->ctrl |= SOLO_P2M_PCI_INC(size >> 2) | - SOLO_P2M_REPEAT(repeat); + desc->ext |= cpu_to_le32(SOLO_P2M_EXT_INC(ext_size >> 2)); + desc->ctrl |= cpu_to_le32(SOLO_P2M_PCI_INC(size >> 2) | + SOLO_P2M_REPEAT(repeat)); } } diff --git a/drivers/staging/solo6x10/solo6010-registers.h b/drivers/staging/solo6x10/solo6010-registers.h index a1dad57..db291bf 100644 --- a/drivers/staging/solo6x10/solo6010-registers.h +++ b/drivers/staging/solo6x10/solo6010-registers.h @@ -24,16 +24,16 @@ /* Global 6010 system configuration */ #define SOLO_SYS_CFG 0x0000 -#define SOLO_SYS_CFG_FOUT_EN 0x00000001 -#define SOLO_SYS_CFG_PLL_BYPASS 0x00000002 -#define SOLO_SYS_CFG_PLL_PWDN 0x00000004 -#define SOLO_SYS_CFG_OUTDIV(__n) (((__n) & 0x003) << 3) -#define SOLO_SYS_CFG_FEEDBACKDIV(__n) (((__n) & 0x1ff) << 5) -#define SOLO_SYS_CFG_INPUTDIV(__n) (((__n) & 0x01f) << 14) +#define SOLO6010_SYS_CFG_FOUT_EN 0x00000001 /* 6010 only */ +#define SOLO6010_SYS_CFG_PLL_BYPASS 0x00000002 /* 6010 only */ +#define SOLO6010_SYS_CFG_PLL_PWDN 0x00000004 /* 6010 only */ +#define SOLO6010_SYS_CFG_OUTDIV(__n) (((__n) & 0x003) << 3) /* 6010 only */ +#define SOLO6010_SYS_CFG_FEEDBACKDIV(__n) (((__n) & 0x1ff) << 5) /* 6010 only */ +#define SOLO6010_SYS_CFG_INPUTDIV(__n) (((__n) & 0x01f) << 14) /* 6010 only */ #define SOLO_SYS_CFG_CLOCK_DIV 0x00080000 #define SOLO_SYS_CFG_NCLK_DELAY(__n) (((__n) & 0x003) << 24) #define SOLO_SYS_CFG_PCLK_DELAY(__n) (((__n) & 0x00f) << 26) -#define SOLO_SYS_CFG_SDRAM64BIT 0x40000000 +#define SOLO_SYS_CFG_SDRAM64BIT 0x40000000 /* 6110: must be set */ #define SOLO_SYS_CFG_RESET 0x80000000 #define SOLO_DMA_CTRL 0x0004 @@ -45,6 +45,7 @@ #define SOLO_DMA_CTRL_READ_DATA_SELECT (1<<3) #define SOLO_DMA_CTRL_READ_CLK_SELECT (1<<2) #define SOLO_DMA_CTRL_LATENCY(n) ((n)<<0) +#define SOLO_DMA_CTRL1 0x0008 #define SOLO_SYS_VCLK 0x000C #define SOLO_VCLK_INVERT (1<<22) @@ -81,6 +82,23 @@ #define SOLO_CHIP_OPTION 0x001C #define SOLO_CHIP_ID_MASK 0x00000007 +#define SOLO6110_PLL_CONFIG 0x0020 +#define SOLO6110_PLL_RANGE_BYPASS (0 << 20) +#define SOLO6110_PLL_RANGE_5_10MHZ (1 << 20) +#define SOLO6110_PLL_RANGE_8_16MHZ (2 << 20) +#define SOLO6110_PLL_RANGE_13_26MHZ (3 << 20) +#define SOLO6110_PLL_RANGE_21_42MHZ (4 << 20) +#define SOLO6110_PLL_RANGE_34_68MHZ (5 << 20) +#define SOLO6110_PLL_RANGE_54_108MHZ (6 << 20) +#define SOLO6110_PLL_RANGE_88_200MHZ (7 << 20) +#define SOLO6110_PLL_DIVR(x) (((x) - 1) << 15) +#define SOLO6110_PLL_DIVQ_EXP(x) ((x) << 12) +#define SOLO6110_PLL_DIVF(x) (((x) - 1) << 4) +#define SOLO6110_PLL_RESET (1 << 3) +#define SOLO6110_PLL_BYPASS (1 << 2) +#define SOLO6110_PLL_FSEN (1 << 1) +#define SOLO6110_PLL_FB (1 << 0) + #define SOLO_EEPROM_CTRL 0x0060 #define SOLO_EEPROM_ACCESS_EN (1<<7) #define SOLO_EEPROM_CS (1<<3) @@ -383,7 +401,9 @@ #define SOLO_VE_BLOCK_BASE(n) ((n)<<0) #define SOLO_VE_CFG1 0x0614 -#define SOLO_VE_BYTE_ALIGN(n) ((n)<<24) +#define SOLO6110_VE_MPEG_SIZE_H(n) ((n)<<28) /* 6110 only */ +#define SOLO6010_VE_BYTE_ALIGN(n) ((n)<<24) /* 6010 only */ +#define SOLO6110_VE_JPEG_SIZE_H(n) ((n)<<20) /* 6110 only */ #define SOLO_VE_INSERT_INDEX (1<<18) #define SOLO_VE_MOTION_MODE(n) ((n)<<16) #define SOLO_VE_MOTION_BASE(n) ((n)<<0) @@ -415,7 +435,7 @@ #define SOLO_VE_OSD_OPT 0x069C #define SOLO_VE_CH_INTL(ch) (0x0700+((ch)*4)) -#define SOLO_VE_CH_MOT(ch) (0x0740+((ch)*4)) +#define SOLO6010_VE_CH_MOT(ch) (0x0740+((ch)*4)) /* 6010 only */ #define SOLO_VE_CH_QP(ch) (0x0780+((ch)*4)) #define SOLO_VE_CH_QP_E(ch) (0x07C0+((ch)*4)) #define SOLO_VE_CH_GOP(ch) (0x0800+((ch)*4)) @@ -427,7 +447,7 @@ #define SOLO_VE_JPEG_QUE(n) (0x0A04+((n)*8)) #define SOLO_VD_CFG0 0x0900 -#define SOLO_VD_CFG_NO_WRITE_NO_WINDOW (1<<24) +#define SOLO6010_VD_CFG_NO_WRITE_NO_WINDOW (1<<24) /* 6010 only */ #define SOLO_VD_CFG_BUSY_WIAT_CODE (1<<23) #define SOLO_VD_CFG_BUSY_WIAT_REF (1<<22) #define SOLO_VD_CFG_BUSY_WIAT_RES (1<<21) diff --git a/drivers/staging/solo6x10/solo6010-v4l2-enc.c b/drivers/staging/solo6x10/solo6010-v4l2-enc.c index b504d59..6fbd50e 100644 --- a/drivers/staging/solo6x10/solo6010-v4l2-enc.c +++ b/drivers/staging/solo6x10/solo6010-v4l2-enc.c @@ -479,6 +479,26 @@ static void write_bits(u8 **out, unsigned *bits, u32 value, unsigned count) } } +static void write_ue(u8 **out, unsigned *bits, unsigned value) /* H.264 only */ +{ + uint32_t max = 0, cnt = 0; + + while (value > max) { + max = (max + 2) * 2 - 2; + cnt++; + } + write_bits(out, bits, 1, cnt + 1); + write_bits(out, bits, ~(max - value), cnt); +} + +static void write_se(u8 **out, unsigned *bits, int value) /* H.264 only */ +{ + if (value <= 0) + write_ue(out, bits, -value * 2); + else + write_ue(out, bits, value * 2 - 1); +} + static void write_mpeg4_end(u8 **out, unsigned *bits) { write_bits(out, bits, 0, 1); @@ -487,6 +507,16 @@ static void write_mpeg4_end(u8 **out, unsigned *bits) write_bits(out, bits, 0xFFFFFFFF, 32 - *bits % 32); } +static void write_h264_end(u8 **out, unsigned *bits, int align) +{ + write_bits(out, bits, 1, 1); + while ((*bits) % 8) + write_bits(out, bits, 0, 1); + if (align) + while ((*bits) % 32) + write_bits(out, bits, 0, 1); +} + static void mpeg4_write_vol(u8 **out, struct solo6010_dev *solo_dev, __le32 *vh, unsigned fps, unsigned interval) { @@ -541,6 +571,54 @@ static void mpeg4_write_vol(u8 **out, struct solo6010_dev *solo_dev, write_mpeg4_end(out, &bits); } +static void h264_write_vol(u8 **out, struct solo6010_dev *solo_dev, __le32 *vh) +{ + static const u8 sps[] = { + 0, 0, 0, 1 /* start code */, 0x67, 66 /* profile_idc */, + 0 /* constraints */, 30 /* level_idc */ + }; + static const u8 pps[] = { + 0, 0, 0, 1 /* start code */, 0x68 + }; + + unsigned bits = 0; + unsigned mbs_w = vop_hsize(vh); + unsigned mbs_h = vop_vsize(vh); + + write_bytes(out, &bits, sps, sizeof(sps)); + write_ue(out, &bits, 0); /* seq_parameter_set_id */ + write_ue(out, &bits, 5); /* log2_max_frame_num_minus4 */ + write_ue(out, &bits, 0); /* pic_order_cnt_type */ + write_ue(out, &bits, 6); /* log2_max_pic_order_cnt_lsb_minus4 */ + write_ue(out, &bits, 1); /* max_num_ref_frames */ + write_bits(out, &bits, 0, 1); /* gaps_in_frame_num_value_allowed_flag */ + write_ue(out, &bits, mbs_w - 1); /* pic_width_in_mbs_minus1 */ + write_ue(out, &bits, mbs_h - 1); /* pic_height_in_map_units_minus1 */ + write_bits(out, &bits, 1, 1); /* frame_mbs_only_flag */ + write_bits(out, &bits, 1, 1); /* direct_8x8_frame_field_flag */ + write_bits(out, &bits, 0, 1); /* frame_cropping_flag */ + write_bits(out, &bits, 0, 1); /* vui_parameters_present_flag */ + write_h264_end(out, &bits, 0); + + write_bytes(out, &bits, pps, sizeof(pps)); + write_ue(out, &bits, 0); /* pic_parameter_set_id */ + write_ue(out, &bits, 0); /* seq_parameter_set_id */ + write_bits(out, &bits, 0, 1); /* entropy_coding_mode_flag */ + write_bits(out, &bits, 0, 1); /* bottom_field_pic_order_in_frame_present_flag */ + write_ue(out, &bits, 0); /* num_slice_groups_minus1 */ + write_ue(out, &bits, 0); /* num_ref_idx_l0_default_active_minus1 */ + write_ue(out, &bits, 0); /* num_ref_idx_l1_default_active_minus1 */ + write_bits(out, &bits, 0, 1); /* weighted_pred_flag */ + write_bits(out, &bits, 0, 2); /* weighted_bipred_idc */ + write_se(out, &bits, 0); /* pic_init_qp_minus26 */ + write_se(out, &bits, 0); /* pic_init_qs_minus26 */ + write_se(out, &bits, 2); /* chroma_qp_index_offset */ + write_bits(out, &bits, 0, 1); /* deblocking_filter_control_present_flag */ + write_bits(out, &bits, 1, 1); /* constrained_intra_pred_flag */ + write_bits(out, &bits, 0, 1); /* redundant_pic_cnt_present_flag */ + write_h264_end(out, &bits, 1); +} + static int solo_fill_mpeg(struct solo_enc_fh *fh, struct solo_enc_buf *enc_buf, struct videobuf_buffer *vb, struct videobuf_dmabuf *vbuf) @@ -575,8 +653,12 @@ static int solo_fill_mpeg(struct solo_enc_fh *fh, struct solo_enc_buf *enc_buf, if (!enc_buf->vop) { u8 header[MAX_VOL_HEADER_LENGTH], *out = header; - mpeg4_write_vol(&out, solo_dev, vh, solo_dev->fps * 1000, - solo_enc->interval * 1000); + if (solo_dev->flags & FLAGS_6110) + h264_write_vol(&out, solo_dev, vh); + else + mpeg4_write_vol(&out, solo_dev, vh, + solo_dev->fps * 1000, + solo_enc->interval * 1000); skip = out - header; enc_write_sg(vbuf->sglist, header, skip); /* Adjust the dma buffer past this header */ diff --git a/drivers/staging/solo6x10/solo6010.h b/drivers/staging/solo6x10/solo6010.h index 9c930f3..4532e12 100644 --- a/drivers/staging/solo6x10/solo6010.h +++ b/drivers/staging/solo6x10/solo6010.h @@ -40,6 +40,7 @@ #ifndef PCI_VENDOR_ID_SOFTLOGIC #define PCI_VENDOR_ID_SOFTLOGIC 0x9413 #define PCI_DEVICE_ID_SOLO6010 0x6010 +#define PCI_DEVICE_ID_SOLO6110 0x6110 #endif #ifndef PCI_VENDOR_ID_BLUECHERRY @@ -70,6 +71,8 @@ #define SOLO6010_VER_NUM \ KERNEL_VERSION(SOLO6010_VER_MAJOR, SOLO6010_VER_MINOR, SOLO6010_VER_SUB) +#define FLAGS_6110 1 + /* * The SOLO6010 actually has 8 i2c channels, but we only use 2. * 0 - Techwell chip(s) @@ -183,6 +186,7 @@ struct solo6010_dev { u8 __iomem *reg_base; int nr_chans; int nr_ext; + u32 flags; u32 irq_mask; u32 motion_mask; spinlock_t reg_io_lock; |