fbdev: move udlfb out of staging.

udlfb has undergone a fair bit of cleanup recently and is effectively at
the point where it can be liberated from staging purgatory and promoted
to a real driver.

The outstanding cleanups are all minor, with some of them dependent on
drivers/video headers, so these will be done incrementally from udlfb's
new home.

Requested-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 files changed, 16 insertions, 281 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5eafdf4..df31a72 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -111,8 +111,6 @@ source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
 
-source "drivers/staging/udlfb/Kconfig"
-
 source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index a97a955..7a15c0c 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)	+= quatech_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
-obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
diff --git a/drivers/staging/udlfb/Kconfig b/drivers/staging/udlfb/Kconfig
deleted file mode 100644
index 65bd5db..0000000
--- a/drivers/staging/udlfb/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.
diff --git a/drivers/staging/udlfb/Makefile b/drivers/staging/udlfb/Makefile
deleted file mode 100644
index 30d9e67..0000000
--- a/drivers/staging/udlfb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_FB_UDL)		+= udlfb.o
diff --git a/drivers/staging/udlfb/udlfb.h b/drivers/staging/udlfb/udlfb.h
deleted file mode 100644
index 6f9785e..0000000
--- a/drivers/staging/udlfb/udlfb.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef UDLFB_H
-#define UDLFB_H
-
-/*
- * TODO: Propose standard fb.h ioctl for reporting damage,
- * using _IOWR() and one of the existing area structs from fb.h
- * Consider these ioctls deprecated, but they're still used by the
- * DisplayLink X server as yet - need both to be modified in tandem
- * when new ioctl(s) are ready.
- */
-#define DLFB_IOCTL_RETURN_EDID	 0xAD
-#define DLFB_IOCTL_REPORT_DAMAGE 0xAA
-struct dloarea {
-	int x, y;
-	int w, h;
-	int x2, y2;
-};
-
-struct urb_node {
-	struct list_head entry;
-	struct dlfb_data *dev;
-	struct delayed_work release_urb_work;
-	struct urb *urb;
-};
-
-struct urb_list {
-	struct list_head list;
-	spinlock_t lock;
-	struct semaphore limit_sem;
-	int available;
-	int count;
-	size_t size;
-};
-
-struct dlfb_data {
-	struct usb_device *udev;
-	struct device *gdev; /* &udev->dev */
-	struct fb_info *info;
-	struct urb_list urbs;
-	struct kref kref;
-	char *backing_buffer;
-	int fb_count;
-	bool virtualized; /* true when physical usb device not present */
-	struct delayed_work free_framebuffer_work;
-	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
-	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
-	char *edid; /* null until we read edid from hw or get from sysfs */
-	size_t edid_size;
-	int sku_pixel_limit;
-	int base16;
-	int base8;
-	u32 pseudo_palette[256];
-	/* blit-only rendering path metrics, exposed through sysfs */
-	atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
-	atomic_t bytes_identical; /* saved effort with backbuffer comparison */
-	atomic_t bytes_sent; /* to usb, after compression including overhead */
-	atomic_t cpu_kcycles_used; /* transpired during pixel processing */
-};
-
-#define NR_USB_REQUEST_I2C_SUB_IO 0x02
-#define NR_USB_REQUEST_CHANNEL 0x12
-
-/* -BULK_SIZE as per usb-skeleton. Can we get full page and avoid overhead? */
-#define BULK_SIZE 512
-#define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE)
-#define WRITES_IN_FLIGHT (4)
-
-#define MIN_EDID_SIZE 128
-#define MAX_EDID_SIZE 128
-
-#define MAX_VENDOR_DESCRIPTOR_SIZE 256
-
-#define GET_URB_TIMEOUT	HZ
-#define FREE_URB_TIMEOUT (HZ*2)
-
-#define BPP                     2
-#define MAX_CMD_PIXELS		255
-
-#define RLX_HEADER_BYTES	7
-#define MIN_RLX_PIX_BYTES       4
-#define MIN_RLX_CMD_BYTES	(RLX_HEADER_BYTES + MIN_RLX_PIX_BYTES)
-
-#define RLE_HEADER_BYTES	6
-#define MIN_RLE_PIX_BYTES	3
-#define MIN_RLE_CMD_BYTES	(RLE_HEADER_BYTES + MIN_RLE_PIX_BYTES)
-
-#define RAW_HEADER_BYTES	6
-#define MIN_RAW_PIX_BYTES	2
-#define MIN_RAW_CMD_BYTES	(RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
-
-#define DL_DEFIO_WRITE_DELAY    5 /* fb_deferred_io.delay in jiffies */
-#define DL_DEFIO_WRITE_DISABLE  (HZ*60) /* "disable" with long delay */
-
-/* remove these once align.h patch is taken into kernel */
-#define DL_ALIGN_UP(x, a) ALIGN(x, a)
-#define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a)
-
-/* remove once this gets added to sysfs.h */
-#define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)
-
-/*
- * udlfb is both a usb device, and a framebuffer device.
- * They may exist at the same time, but during various stages
- * inactivity, teardown, or "virtual" operation, only one or the
- * other will exist (one will outlive the other).  So we can't
- * call the dev_*() macros, because we don't have a stable dev object.
- */
-#define dl_err(format, arg...) \
-	pr_err("udlfb: " format, ## arg)
-#define dl_warn(format, arg...) \
-	pr_warning("udlfb: " format, ## arg)
-#define dl_notice(format, arg...) \
-	pr_notice("udlfb: " format, ## arg)
-#define dl_info(format, arg...) \
-	pr_info("udlfb: " format, ## arg)
-
-#endif
diff --git a/drivers/staging/udlfb/udlfb.txt b/drivers/staging/udlfb/udlfb.txt
deleted file mode 100644
index 7fdde2a..0000000
--- a/drivers/staging/udlfb/udlfb.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-
-What is udlfb?
-===============
-
-This is a driver for DisplayLink USB 2.0 era graphics chips.
-
-DisplayLink chips provide simple hline/blit operations with some compression,
-pairing that with a hardware framebuffer (16MB) on the other end of the
-USB wire.  That hardware framebuffer is able to drive the VGA, DVI, or HDMI
-monitor with no CPU involvement until a pixel has to change.
-
-The CPU or other local resource does all the rendering; optinally compares the
-result with a local shadow of the remote hardware framebuffer to identify
-the minimal set of pixels that have changed; and compresses and sends those
-pixels line-by-line via USB bulk transfers.
-
-Because of the efficiency of bulk transfers and a protocol on top that
-does not require any acks - the effect is very low latency that
-can support surprisingly high resolutions with good performance for
-non-gaming and non-video applications.
-
-Mode setting, EDID read, etc are other bulk or control transfers. Mode
-setting is very flexible - able to set nearly arbitrary modes from any timing.
-
-Advantages of USB graphics in general:
-
- * Ability to add a nearly arbitrary number of displays to any USB 2.0
-   capable system. On Linux, number of displays is limited by fbdev interface
-   (FB_MAX is currently 32). Of course, all USB devices on the same
-   host controller share the same 480Mbs USB 2.0 interface.
-
-Advantages of supporting DisplayLink chips with kernel framebuffer interface:
-
- * The actual hardware functionality of DisplayLink chips matches nearly
-   one-to-one with the fbdev interface, making the driver quite small and
-   tight relative to the functionality it provides.
- * X servers and other applications can use the standard fbdev interface
-   from user mode to talk to the device, without needing to know anything
-   about USB or DisplayLink's protocol at all. A "displaylink" X driver
-   and a slightly modified "fbdev" X driver are among those that already do.
-
-Disadvantages:
-
- * Fbdev's mmap interface assumes a real hardware framebuffer is mapped.
-   In the case of USB graphics, it is just an allocated (virtual) buffer.
-   Writes need to be detected and encoded into USB bulk transfers by the CPU.
-   Accurate damage/changed area notifications work around this problem.
-   In the future, hopefully fbdev will be enhanced with an small standard
-   interface to allow mmap clients to report damage, for the benefit
-   of virtual or remote framebuffers.
- * Fbdev does not arbitrate client ownership of the framebuffer well.
- * Fbcon assumes the first framebuffer it finds should be consumed for console.
- * It's not clear what the future of fbdev is, given the rise of KMS/DRM.
-
-How to use it?
-==============
-
-Udlfb, when loaded as a module, will match against all USB 2.0 generation
-DisplayLink chips (Alex and Ollie family). It will then attempt to read the EDID
-of the monitor, and set the best common mode between the DisplayLink device
-and the monitor's capabilities.
-
-If the DisplayLink device is successful, it will paint a "green screen" which
-means that from a hardware and fbdev software perspective, everything is good.
-
-At that point, a /dev/fb? interface will be present for user-mode applications
-to open and begin writing to the framebuffer of the DisplayLink device using
-standard fbdev calls.  Note that if mmap() is used, by default the user mode
-application must send down damage notifcations to trigger repaints of the
-changed regions.  Alternatively, udlfb can be recompiled with experimental
-defio support enabled, to support a page-fault based detection mechanism
-that can work without explicit notifcation.
-
-The most common client of udlfb is xf86-video-displaylink or a modified
-xf86-video-fbdev X server. These servers have no real DisplayLink specific
-code. They write to the standard framebuffer interface and rely on udlfb
-to do its thing.  The one extra feature they have is the ability to report
-rectangles from the X DAMAGE protocol extension down to udlfb via udlfb's
-damage interface (which will hopefully be standardized for all virtual
-framebuffers that need damage info). These damage notifications allow
-udlfb to efficiently process the changed pixels.
-
-Module Options
-==============
-
-Special configuration for udlfb is usually unnecessary. There are a few
-options, however.
-
-From the command line, pass options to modprobe
-modprobe udlfb defio=1 console=1
-
-Or for permanent option, create file like /etc/modprobe.d/options with text
-options udlfb defio=1 console=1
-
-Accepted options:
-
-fb_defio	Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
-		module to track changed areas of the framebuffer by page faults.
-        	Standard fbdev applications that use mmap but that do not
-		report damage, may be able to work with this enabled.
-		Disabled by default because of overhead and other issues.
-
-console		Allow fbcon to attach to udlfb provided framebuffers. This
-		is disabled by default because fbcon will aggressively consume
-		the first framebuffer it finds, which isn't usually what the
-		user wants in the case of USB displays.
-
-Sysfs Attributes
-================
-
-Udlfb creates several files in /sys/class/graphics/fb?
-Where ? is the sequential framebuffer id of the particular DisplayLink device
-
-edid	       		If a valid EDID blob is written to this file (typically
-			by a udev rule), then udlfb will use this EDID as a
-			backup in case reading the actual EDID of the monitor
-			attached to the DisplayLink device fails. This is
-			especially useful for fixed panels, etc. that cannot
-			communicate their capabilities via EDID. Reading
-			this file returns the current EDID of the attached
-			monitor (or last backup value written). This is
-			useful to get the EDID of the attached monitor,
-			which can be passed to utilities like parse-edid.
-
-metrics_bytes_rendered	32-bit count of pixel bytes rendered
-
-metrics_bytes_identical 32-bit count of how many of those bytes were found to be
-			unchanged, based on a shadow framebuffer check
-
-metrics_bytes_sent	32-bit count of how many bytes were transferred over
-			USB to communicate the resulting changed pixels to the
-			hardware. Includes compression and protocol overhead
-
-metrics_cpu_kcycles_used 32-bit count of CPU cycles used in processing the
-			above pixels (in thousands of cycles).
-
-metrics_reset		Write-only. Any write to this file resets all metrics
-			above to zero.  Note that the 32-bit counters above
-			roll over very quickly. To get reliable results, design
-			performance tests to start and finish in a very short
-			period of time (one minute or less is safe).
-
---
-Bernie Thompson <bernie@plugable.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 27c1fb4..37771d0 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2034,6 +2034,20 @@ config FB_SM501
 
 	  If unsure, say N.
 
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
 
 config FB_PNX4008_DUM
 	tristate "Display Update Module support on Philips PNX4008 board"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 485e8ed..03678e3 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -122,6 +122,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/video/udlfb.c
index fed2510..0cca487 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -26,8 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-
-#include "udlfb.h"
+#include <video/udlfb.h>
 
 static struct fb_fix_screeninfo dlfb_fix = {
 	.id =           "udlfb",