diff options
author | Ondrej Zajicek <santiago@crfreenet.org> | 2007-02-12 08:54:49 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-02-12 17:48:41 (GMT) |
commit | a268422de8bf1b4c0cb97987b6c329c9f6a3da4b (patch) | |
tree | 521e88fddb250dc193893c07bd889b5a28b7ded5 /drivers | |
parent | 59ae6c6b87711ceb2d1ea5f9e08bb13aee947a29 (diff) | |
download | linux-fsl-qoriq-a268422de8bf1b4c0cb97987b6c329c9f6a3da4b.tar.xz |
[PATCH] fbdev driver for S3 Trio/Virge
Add a driver for S3 Trio / S3 Virge. Driver is tested with most versions
of S3 Trio and with S3 Virge/DX, on i386.
(akpm: We kind-of have support for this hardware already, but...
virgefb.c
- amiga/zorro specific,
- broken (according to Kconfig),
- uses obsolete/nonexistent interface (struct display_switch)
- recent Adrian Bunk's patch removes this driver
S3triofb.c
- ppc/openfirmware specific
- minimal functionality
- broken (according to Kconfig),
- uses obsolete/nonexistent interface (struct display_switch)
)
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/video/Kconfig | 19 | ||||
-rw-r--r-- | drivers/video/Makefile | 2 | ||||
-rw-r--r-- | drivers/video/s3fb.c | 1180 | ||||
-rw-r--r-- | drivers/video/svgalib.c | 632 |
4 files changed, 1833 insertions, 0 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 45fe65d..3ab0631 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -85,6 +85,14 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_SVGALIB + tristate + depends on FB + default n + ---help--- + Common utility functions useful to fbdev drivers of VGA-based + cards. + config FB_MACMODES tristate depends on FB @@ -1147,6 +1155,17 @@ config FB_S3TRIO help If you have a S3 Trio say Y. Say N for S3 Virge. +config FB_S3 + tristate "S3 Trio/Virge support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + ---help--- + Driver for graphics boards with S3 Trio / S3 Virge chip. + config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 309a26d..d4e2b15 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SYSFS) += backlight/ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o +obj-$(CONFIG_FB_SVGALIB) += svgalib.o obj-$(CONFIG_FB_MACMODES) += macmodes.o obj-$(CONFIG_FB_DDC) += fb_ddc.o @@ -54,6 +55,7 @@ obj-$(CONFIG_FB_S3TRIO) += S3triofb.o obj-$(CONFIG_FB_FM2) += fm2fb.o obj-$(CONFIG_FB_CYBLA) += cyblafb.o obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_S3) += s3fb.o vgastate.o obj-$(CONFIG_FB_STI) += stifb.o obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c new file mode 100644 index 0000000..3162c37 --- /dev/null +++ b/drivers/video/s3fb.c @@ -0,0 +1,1180 @@ +/* + * linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge + * + * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) + * which is based on the code of neofb. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/svga.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/console.h> /* Why should fb driver call console functions? because acquire_console_sem() */ +#include <video/vga.h> + +#ifdef CONFIG_MTRR +#include <asm/mtrr.h> +#endif + +struct s3fb_info { + int chip, rev, mclk_freq; + int mtrr_reg; + struct vgastate state; + struct mutex open_lock; + unsigned int ref_count; + u32 pseudo_palette[16]; +}; + + +/* ------------------------------------------------------------------------- */ + +static const struct svga_fb_format s3fb_formats[] = { + { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, + FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16}, + { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16}, + { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1, + FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16}, + { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8}, + {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, + {16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, + {24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, + {32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, + FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, + SVGA_FORMAT_END +}; + + +static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3, + 60000, 240000, 14318}; + +static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512}; + +static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+", + "S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX", + "S3 Plato/PX", "S3 Aurora64VP", "S3 Virge", + "S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX", + "S3 Virge/GX2", "S3 Virge/GX2P", "S3 Virge/GX2P"}; + +#define CHIP_UNKNOWN 0x00 +#define CHIP_732_TRIO32 0x01 +#define CHIP_764_TRIO64 0x02 +#define CHIP_765_TRIO64VP 0x03 +#define CHIP_767_TRIO64UVP 0x04 +#define CHIP_775_TRIO64V2_DX 0x05 +#define CHIP_785_TRIO64V2_GX 0x06 +#define CHIP_551_PLATO_PX 0x07 +#define CHIP_M65_AURORA64VP 0x08 +#define CHIP_325_VIRGE 0x09 +#define CHIP_988_VIRGE_VX 0x0A +#define CHIP_375_VIRGE_DX 0x0B +#define CHIP_385_VIRGE_GX 0x0C +#define CHIP_356_VIRGE_GX2 0x0D +#define CHIP_357_VIRGE_GX2P 0x0E +#define CHIP_359_VIRGE_GX2P 0x0F + +#define CHIP_XXX_TRIO 0x80 +#define CHIP_XXX_TRIO64V2_DXGX 0x81 +#define CHIP_XXX_VIRGE_DXGX 0x82 + +#define CHIP_UNDECIDED_FLAG 0x80 +#define CHIP_MASK 0xFF + +/* CRT timing register sets */ + +static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END}; +static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END}; +static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END}; +static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END}; +static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END}; +static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END}; + +static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END}; +static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END}; +static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END}; +static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END}; +static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END}; +static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END}; + +static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END}; +static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x31, 4, 5}, {0x51, 0, 1}, VGA_REGSET_END}; +static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */ + +static const struct svga_timing_regs s3_timing_regs = { + s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs, + s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs, + s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs, + s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs, +}; + + +/* ------------------------------------------------------------------------- */ + +/* Module parameters */ + + +static char *mode = "640x480-8@60"; + +#ifdef CONFIG_MTRR +static int mtrr = 1; +#endif + +static int fasttext = 1; + + +MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge"); + +module_param(mode, charp, 0444); +MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc)"); + +#ifdef CONFIG_MTRR +module_param(mtrr, int, 0444); +MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)"); +#endif + +module_param(fasttext, int, 0644); +MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)"); + + +/* ------------------------------------------------------------------------- */ + +/* Set font in S3 fast text mode */ + +static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map) +{ + const u8 *font = map->data; + u8* fb = (u8 *) info->screen_base; + int i, c; + + if ((map->width != 8) || (map->height != 16) || + (map->depth != 1) || (map->length != 256)) { + printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n", + info->node, map->width, map->height, map->depth, map->length); + return; + } + + fb += 2; + for (i = 0; i < map->height; i++) { + for (c = 0; c < map->length; c++) { + fb[c * 4] = font[c * map->height + i]; + } + fb += 1024; + } +} + + + +static struct fb_tile_ops s3fb_tile_ops = { + .fb_settile = svga_settile, + .fb_tilecopy = svga_tilecopy, + .fb_tilefill = svga_tilefill, + .fb_tileblit = svga_tileblit, + .fb_tilecursor = svga_tilecursor, +}; + +static struct fb_tile_ops s3fb_fast_tile_ops = { + .fb_settile = s3fb_settile_fast, + .fb_tilecopy = svga_tilecopy, + .fb_tilefill = svga_tilefill, + .fb_tileblit = svga_tileblit, + .fb_tilecursor = svga_tilecursor, +}; + + +/* ------------------------------------------------------------------------- */ + +/* image data is MSB-first, fb structure is MSB-first too */ +static inline u32 expand_color(u32 c) +{ + return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF; +} + +/* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */ +static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image) +{ + u32 fg = expand_color(image->fg_color); + u32 bg = expand_color(image->bg_color); + const u8 *src1, *src; + u8 __iomem *dst1; + u32 __iomem *dst; + u32 val; + int x, y; + + src1 = image->data; + dst1 = info->screen_base + (image->dy * info->fix.line_length) + + ((image->dx / 8) * 4); + + for (y = 0; y < image->height; y++) { + src = src1; + dst = (u32 __iomem *) dst1; + for (x = 0; x < image->width; x += 8) { + val = *(src++) * 0x01010101; + val = (val & fg) | (~val & bg); + fb_writel(val, dst++); + } + src1 += image->width / 8; + dst1 += info->fix.line_length; + } + +} + +/* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */ +static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + u32 fg = expand_color(rect->color); + u8 __iomem *dst1; + u32 __iomem *dst; + int x, y; + + dst1 = info->screen_base + (rect->dy * info->fix.line_length) + + ((rect->dx / 8) * 4); + + for (y = 0; y < rect->height; y++) { + dst = (u32 __iomem *) dst1; + for (x = 0; x < rect->width; x += 8) { + fb_writel(fg, dst++); + } + dst1 += info->fix.line_length; + } +} + + +/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */ +static inline u32 expand_pixel(u32 c) +{ + return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) | + ((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF; +} + +/* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */ +static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image) +{ + u32 fg = image->fg_color * 0x11111111; + u32 bg = image->bg_color * 0x11111111; + const u8 *src1, *src; + u8 __iomem *dst1; + u32 __iomem *dst; + u32 val; + int x, y; + + src1 = image->data; + dst1 = info->screen_base + (image->dy * info->fix.line_length) + + ((image->dx / 8) * 4); + + for (y = 0; y < image->height; y++) { + src = src1; + dst = (u32 __iomem *) dst1; + for (x = 0; x < image->width; x += 8) { + val = expand_pixel(*(src++)); + val = (val & fg) | (~val & bg); + fb_writel(val, dst++); + } + src1 += image->width / 8; + dst1 += info->fix.line_length; + } +} + +static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if ((info->var.bits_per_pixel == 4) && (image->depth == 1) + && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) { + if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES) + s3fb_iplan_imageblit(info, image); + else + s3fb_cfb4_imageblit(info, image); + } else + cfb_imageblit(info, image); +} + +static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + if ((info->var.bits_per_pixel == 4) + && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0) + && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)) + s3fb_iplan_fillrect(info, rect); + else + cfb_fillrect(info, rect); +} + + + +/* ------------------------------------------------------------------------- */ + + +static void s3_set_pixclock(struct fb_info *info, u32 pixclock) +{ + u16 m, n, r; + u8 regval; + + svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); + + /* Set VGA misc register */ + regval = vga_r(NULL, VGA_MIS_R); + vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD); + + /* Set S3 clock registers */ + vga_wseq(NULL, 0x12, ((n - 2) | (r << 5))); + vga_wseq(NULL, 0x13, m - 2); + + udelay(1000); + + /* Activate clock - write 0, 1, 0 to seq/15 bit 5 */ + regval = vga_rseq (NULL, 0x15); /* | 0x80; */ + vga_wseq(NULL, 0x15, regval & ~(1<<5)); + vga_wseq(NULL, 0x15, regval | (1<<5)); + vga_wseq(NULL, 0x15, regval & ~(1<<5)); +} + + +/* Open framebuffer */ + +static int s3fb_open(struct fb_info *info, int user) +{ + struct s3fb_info *par = info->par; + + mutex_lock(&(par->open_lock)); + if (par->ref_count == 0) { + memset(&(par->state), 0, sizeof(struct vgastate)); + par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP; + par->state.num_crtc = 0x70; + par->state.num_seq = 0x20; + save_vga(&(par->state)); + } + + par->ref_count++; + mutex_unlock(&(par->open_lock)); + + return 0; +} + +/* Close framebuffer */ + +static int s3fb_release(struct fb_info *info, int user) +{ + struct s3fb_info *par = info->par; + + mutex_lock(&(par->open_lock)); + if (par->ref_count == 0) { + mutex_unlock(&(par->open_lock)); + return -EINVAL; + } + + if (par->ref_count == 1) + restore_vga(&(par->state)); + + par->ref_count--; + mutex_unlock(&(par->open_lock)); + + return 0; +} + +/* Validate passed in var */ + +static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct s3fb_info *par = info->par; + int rv, mem, step; + + /* Find appropriate format */ + rv = svga_match_format (s3fb_formats, var, NULL); + if ((rv < 0) || ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6))) + { /* 24bpp on VIRGE VX, 32bpp on others */ + printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node); + return rv; + } + + /* Do not allow to have real resoulution larger than virtual */ + if (var->xres > var->xres_virtual) + var->xres_virtual = var->xres; + + if (var->yres > var->yres_virtual) + var->yres_virtual = var->yres; + + /* Round up xres_virtual to have proper alignment of lines */ + step = s3fb_formats[rv].xresstep - 1; + var->xres_virtual = (var->xres_virtual+step) & ~step; + + /* Check whether have enough memory */ + mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual; + if (mem > info->screen_size) + { + printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", + info->node, mem >> 10, (unsigned int) (info->screen_size >> 10)); + return -EINVAL; + } + + rv = svga_check_timings (&s3_timing_regs, var, info->node); + if (rv < 0) + { + printk(KERN_ERR "fb%d: invalid timings requested\n", info->node); + return rv; + } + + return 0; +} + +/* Set video mode from par */ + +static int s3fb_set_par(struct fb_info *info) +{ + struct s3fb_info *par = info->par; + u32 value, mode, hmul, offset_value, screen_size, multiplex; + u32 bpp = info->var.bits_per_pixel; + + if (bpp != 0) { + info->fix.ypanstep = 1; + info->fix.line_length = (info->var.xres_virtual * bpp) / 8; + + info->flags &= ~FBINFO_MISC_TILEBLITTING; + info->tileops = NULL; + + offset_value = (info->var.xres_virtual * bpp) / 64; + screen_size = info->var.yres_virtual * info->fix.line_length; + } else { + info->fix.ypanstep = 16; + info->fix.line_length = 0; + + info->flags |= FBINFO_MISC_TILEBLITTING; + info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops; + + offset_value = info->var.xres_virtual / 16; + screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64; + } + + info->var.xoffset = 0; + info->var.yoffset = 0; + info->var.activate = FB_ACTIVATE_NOW; + + /* Unlock registers */ + vga_wcrt(NULL, 0x38, 0x48); + vga_wcrt(NULL, 0x39, 0xA5); + vga_wseq(NULL, 0x08, 0x06); + svga_wcrt_mask(0x11, 0x00, 0x80); + + /* Blank screen and turn off sync */ + svga_wseq_mask(0x01, 0x20, 0x20); + svga_wcrt_mask(0x17, 0x00, 0x80); + + /* Set default values */ + svga_set_default_gfx_regs(); + svga_set_default_atc_regs(); + svga_set_default_seq_regs(); + svga_set_default_crt_regs(); + svga_wcrt_multi(s3_line_compare_regs, 0xFFFFFFFF); + svga_wcrt_multi(s3_start_address_regs, 0); + + /* S3 specific initialization */ + svga_wcrt_mask(0x58, 0x10, 0x10); /* enable linear framebuffer */ + svga_wcrt_mask(0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */ + +/* svga_wcrt_mask(0x33, 0x08, 0x08); */ /* DDR ? */ +/* svga_wcrt_mask(0x43, 0x01, 0x01); */ /* DDR ? */ + svga_wcrt_mask(0x33, 0x00, 0x08); /* no DDR ? */ + svga_wcrt_mask(0x43, 0x00, 0x01); /* no DDR ? */ + + svga_wcrt_mask(0x5D, 0x00, 0x28); // Clear strange HSlen bits + +/* svga_wcrt_mask(0x58, 0x03, 0x03); */ + +/* svga_wcrt_mask(0x53, 0x12, 0x13); */ /* enable MMIO */ +/* svga_wcrt_mask(0x40, 0x08, 0x08); */ /* enable write buffer */ + + + /* Set the offset register */ + pr_debug("fb%d: offset register : %d\n", info->node, offset_value); + svga_wcrt_multi(s3_offset_regs, offset_value); + + vga_wcrt(NULL, 0x54, 0x18); /* M parameter */ + vga_wcrt(NULL, 0x60, 0xff); /* N parameter */ + vga_wcrt(NULL, 0x61, 0xff); /* L parameter */ + vga_wcrt(NULL, 0x62, 0xff); /* L parameter */ + + vga_wcrt(NULL, 0x3A, 0x35); + svga_wattr(0x33, 0x00); + + if (info->var.vmode & FB_VMODE_DOUBLE) + svga_wcrt_mask(0x09, 0x80, 0x80); + else + svga_wcrt_mask(0x09, 0x00, 0x80); + + if (info->var.vmode & FB_VMODE_INTERLACED) + svga_wcrt_mask(0x42, 0x20, 0x20); + else + svga_wcrt_mask(0x42, 0x00, 0x20); + + /* Disable hardware graphics cursor */ + svga_wcrt_mask(0x45, 0x00, 0x01); + /* Disable Streams engine */ + svga_wcrt_mask(0x67, 0x00, 0x0C); + + mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix)); + + /* S3 virge DX hack */ + if (par->chip == CHIP_375_VIRGE_DX) { + vga_wcrt(NULL, 0x86, 0x80); + vga_wcrt(NULL, 0x90, 0x00); + } + + /* S3 virge VX hack */ + if (par->chip == CHIP_988_VIRGE_VX) { + vga_wcrt(NULL, 0x50, 0x00); + vga_wcrt(NULL, 0x67, 0x50); + + vga_wcrt(NULL, 0x63, (mode <= 2) ? 0x90 : 0x09); + vga_wcrt(NULL, 0x66, 0x90); + } + + svga_wcrt_mask(0x31, 0x00, 0x40); + multiplex = 0; + hmul = 1; + + /* Set mode-specific register values */ + switch (mode) { + case 0: + pr_debug("fb%d: text mode\n", info->node); + svga_set_textmode_vga_regs(); + + /* Set additional registers like in 8-bit mode */ + svga_wcrt_mask(0x50, 0x00, 0x30); + svga_wcrt_mask(0x67, 0x00, 0xF0); + + /* Disable enhanced mode */ + svga_wcrt_mask(0x3A, 0x00, 0x30); + + if (fasttext) { + pr_debug("fb%d: high speed text mode set\n", info->node); + svga_wcrt_mask(0x31, 0x40, 0x40); + } + break; + case 1: + pr_debug("fb%d: 4 bit pseudocolor\n", info->node); + vga_wgfx(NULL, VGA_GFX_MODE, 0x40); + + /* Set additional registers like in 8-bit mode */ + svga_wcrt_mask(0x50, 0x00, 0x30); + svga_wcrt_mask(0x67, 0x00, 0xF0); + + /* disable enhanced mode */ + svga_wcrt_mask(0x3A, 0x00, 0x30); + break; + case 2: + pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node); + + /* Set additional registers like in 8-bit mode */ + svga_wcrt_mask(0x50, 0x00, 0x30); + svga_wcrt_mask(0x67, 0x00, 0xF0); + + /* disable enhanced mode */ + svga_wcrt_mask(0x3A, 0x00, 0x30); + break; + case 3: + pr_debug("fb%d: 8 bit pseudocolor\n", info->node); + if (info->var.pixclock > 20000) { + svga_wcrt_mask(0x50, 0x00, 0x30); + svga_wcrt_mask(0x67, 0x00, 0xF0); + } else { + svga_wcrt_mask(0x50, 0x00, 0x30); + svga_wcrt_mask(0x67, 0x10, 0xF0); + multiplex = 1; + } + break; + case 4: + pr_debug("fb%d: 5/5/5 truecolor\n", info->node); + if (par->chip == CHIP_988_VIRGE_VX) { + if (info->var.pixclock > 20000) + svga_wcrt_mask(0x67, 0x20, 0xF0); + else + svga_wcrt_mask(0x67, 0x30, 0xF0); + } else { + svga_wcrt_mask(0x50, 0x10, 0x30); + svga_wcrt_mask(0x67, 0x30, 0xF0); + hmul = 2; + } + break; + case 5: + pr_debug("fb%d: 5/6/5 truecolor\n", info->node); + if (par->chip == CHIP_988_VIRGE_VX) { + if (info->var.pixclock > 20000) + svga_wcrt_mask(0x67, 0x40, 0xF0); + else + svga_wcrt_mask(0x67, 0x50, 0xF0); + } else { + svga_wcrt_mask(0x50, 0x10, 0x30); + svga_wcrt_mask(0x67, 0x50, 0xF0); + hmul = 2; + } + break; + case 6: + /* VIRGE VX case */ + pr_debug("fb%d: 8/8/8 truecolor\n", info->node); + svga_wcrt_mask(0x67, 0xD0, 0xF0); + break; + case 7: + pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node); + svga_wcrt_mask(0x50, 0x30, 0x30); + svga_wcrt_mask(0x67, 0xD0, 0xF0); + break; + default: + printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node); + return -EINVAL; + } + + if (par->chip != CHIP_988_VIRGE_VX) { + svga_wseq_mask(0x15, multiplex ? 0x10 : 0x00, 0x10); + svga_wseq_mask(0x18, multiplex ? 0x80 : 0x00, 0x80); + } + + s3_set_pixclock(info, info->var.pixclock); + svga_set_timings(&s3_timing_regs, &(info->var), hmul, 1, + (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, + (info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1, + hmul, info->node); + + /* Set interlaced mode start/end register */ + value = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len; + value = ((value * hmul) / 8) - 5; + vga_wcrt(NULL, 0x3C, (value + 1) / 2); + + memset((u8*)info->screen_base, 0x00, screen_size); + /* Device and screen back on */ + svga_wcrt_mask(0x17, 0x80, 0x80); + svga_wseq_mask(0x01, 0x00, 0x20); + + return 0; +} + +/* Set a colour register */ + +static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *fb) +{ + switch (fb->var.bits_per_pixel) { + case 0: + case 4: + if (regno >= 16) + return -EINVAL; + + if ((fb->var.bits_per_pixel == 4) && + (fb->var.nonstd == 0)) { + outb(0xF0, VGA_PEL_MSK); + outb(regno*16, VGA_PEL_IW); + } else { + outb(0x0F, VGA_PEL_MSK); + outb(regno, VGA_PEL_IW); + } + outb(red >> 10, VGA_PEL_D); + outb(green >> 10, VGA_PEL_D); + outb(blue >> 10, VGA_PEL_D); + break; + case 8: + if (regno >= 256) + return -EINVAL; + + outb(0xFF, VGA_PEL_MSK); + outb(regno, VGA_PEL_IW); + outb(red >> 10, VGA_PEL_D); + outb(green >> 10, VGA_PEL_D); + outb(blue >> 10, VGA_PEL_D); + break; + case 16: + if (regno >= 16) + return -EINVAL; + + if (fb->var.green.length == 5) + ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) | + ((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11); + else if (fb->var.green.length == 6) + ((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) | + ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11); + else return -EINVAL; + break; + case 24: + case 32: + if (regno >= 16) + return -EINVAL; + + ((u32*)fb->pseudo_palette)[regno] = ((transp & 0xFF00) << 16) | ((red & 0xFF00) << 8) | + (green & 0xFF00) | ((blue & 0xFF00) >> 8); + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* Set the display blanking state */ + +static int s3fb_blank(int blank_mode, struct fb_info *info) +{ + switch (blank_mode) { + case FB_BLANK_UNBLANK: + pr_debug("fb%d: unblank\n", info->node); + svga_wcrt_mask(0x56, 0x00, 0x06); + svga_wseq_mask(0x01, 0x00, 0x20); + break; + case FB_BLANK_NORMAL: + pr_debug("fb%d: blank\n", info->node); + svga_wcrt_mask(0x56, 0x00, 0x06); + svga_wseq_mask(0x01, 0x20, 0x20); + break; + case FB_BLANK_HSYNC_SUSPEND: + pr_debug("fb%d: hsync\n", info->node); + svga_wcrt_mask(0x56, 0x02, 0x06); + svga_wseq_mask(0x01, 0x20, 0x20); + break; + case FB_BLANK_VSYNC_SUSPEND: + pr_debug("fb%d: vsync\n", info->node); + svga_wcrt_mask(0x56, 0x04, 0x06); + svga_wseq_mask(0x01, 0x20, 0x20); + break; + case FB_BLANK_POWERDOWN: + pr_debug("fb%d: sync down\n", info->node); + svga_wcrt_mask(0x56, 0x06, 0x06); + svga_wseq_mask(0x01, 0x20, 0x20); + break; + } + + return 0; +} + + +/* Pan the display */ + +static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { + + unsigned int offset; + + /* Validate the offsets */ + if ((var->xoffset + var->xres) > var->xres_virtual) + return -EINVAL; + if ((var->yoffset + var->yres) > var->yres_virtual) + return -EINVAL; + + /* Calculate the offset */ + if (var->bits_per_pixel == 0) { + offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2); + offset = offset >> 2; + } else { + offset = (var->yoffset * info->fix.line_length) + + (var->xoffset * var->bits_per_pixel / 8); + offset = offset >> 2; + } + + /* Set the offset */ + svga_wcrt_multi(s3_start_address_regs, offset); + + return 0; +} + +/* ------------------------------------------------------------------------- */ + +/* Frame buffer operations */ + +static struct fb_ops s3fb_ops = { + .owner = THIS_MODULE, + .fb_open = s3fb_open, + .fb_release = s3fb_release, + .fb_check_var = s3fb_check_var, + .fb_set_par = s3fb_set_par, + .fb_setcolreg = s3fb_setcolreg, + .fb_blank = s3fb_blank, + .fb_pan_display = s3fb_pan_display, + .fb_fillrect = s3fb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = s3fb_imageblit, +}; + +/* ------------------------------------------------------------------------- */ + +static int __devinit s3_identification(int chip) +{ + if (chip == CHIP_XXX_TRIO) { + u8 cr30 = vga_rcrt(NULL, 0x30); + u8 cr2e = vga_rcrt(NULL, 0x2e); + u8 cr2f = vga_rcrt(NULL, 0x2f); + + if ((cr30 == 0xE0) || (cr30 == 0xE1)) { + if (cr2e == 0x10) + return CHIP_732_TRIO32; + if (cr2e == 0x11) { + if (! (cr2f & 0x40)) + return CHIP_764_TRIO64; + else + return CHIP_765_TRIO64VP; + } + } + } + + if (chip == CHIP_XXX_TRIO64V2_DXGX) { + u8 cr6f = vga_rcrt(NULL, 0x6f); + + if (! (cr6f & 0x01)) + return CHIP_775_TRIO64V2_DX; + else + return CHIP_785_TRIO64V2_GX; + } + + if (chip == CHIP_XXX_VIRGE_DXGX) { + u8 cr6f = vga_rcrt(NULL, 0x6f); + + if (! (cr6f & 0x01)) + return CHIP_375_VIRGE_DX; + else + return CHIP_385_VIRGE_GX; + } + + return CHIP_UNKNOWN; +} + + +/* PCI probe */ + +static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct fb_info *info; + struct s3fb_info *par; + int rc; + u8 regval, cr38, cr39; + + /* Ignore secondary VGA device because there is no VGA arbitration */ + if (! svga_primary_device(dev)) { + dev_info(&(dev->dev), "ignoring secondary device\n"); + return -ENODEV; + } + + /* Allocate and fill driver data structure */ + info = framebuffer_alloc(sizeof(struct s3fb_info), NULL); + if (!info) { + dev_err(&(dev->dev), "cannot allocate memory\n"); + return -ENOMEM; + } + + par = info->par; + mutex_init(&par->open_lock); + + info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN; + info->fbops = &s3fb_ops; + + /* Prepare PCI device */ + rc = pci_enable_device(dev); + if (rc < 0) { + dev_err(&(dev->dev), "cannot enable PCI device\n"); + goto err_enable_device; + } + + rc = pci_request_regions(dev, "s3fb"); + if (rc < 0) { + dev_err(&(dev->dev), "cannot reserve framebuffer region\n"); + goto err_request_regions; + } + + + info->fix.smem_start = pci_resource_start(dev, 0); + info->fix.smem_len = pci_resource_len(dev, 0); + + /* Map physical IO memory address into kernel space */ + info->screen_base = pci_iomap(dev, 0, 0); + if (! info->screen_base) { + rc = -ENOMEM; + dev_err(&(dev->dev), "iomap for framebuffer failed\n"); + goto err_iomap; + } + + /* Unlock regs */ + cr38 = vga_rcrt(NULL, 0x38); + cr39 = vga_rcrt(NULL, 0x39); + vga_wseq(NULL, 0x08, 0x06); + vga_wcrt(NULL, 0x38, 0x48); + vga_wcrt(NULL, 0x39, 0xA5); + + /* Find how many physical memory there is on card */ + /* 0x36 register is accessible even if other registers are locked */ + regval = vga_rcrt(NULL, 0x36); + info->screen_size = s3_memsizes[regval >> 5] << 10; + info->fix.smem_len = info->screen_size; + + par->chip = id->driver_data & CHIP_MASK; + par->rev = vga_rcrt(NULL, 0x2f); + if (par->chip & CHIP_UNDECIDED_FLAG) + par->chip = s3_identification(par->chip); + + /* Find MCLK frequency */ + regval = vga_rseq(NULL, 0x10); + par->mclk_freq = ((vga_rseq(NULL, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2); + par->mclk_freq = par->mclk_freq >> (regval >> 5); + + /* Restore locks */ + vga_wcrt(NULL, 0x38, cr38); + vga_wcrt(NULL, 0x39, cr39); + + strcpy(info->fix.id, s3_names [par->chip]); + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + info->fix.ypanstep = 0; + info->fix.accel = FB_ACCEL_NONE; + info->pseudo_palette = (void*) (par->pseudo_palette); + + /* Prepare startup mode */ + rc = fb_find_mode(&(info->var), info, mode, NULL, 0, NULL, 8); + if (! ((rc == 1) || (rc == 2))) { + rc = -EINVAL; + dev_err(&(dev->dev), "mode %s not found\n", mode); + goto err_find_mode; + } + + rc = fb_alloc_cmap(&info->cmap, 256, 0); + if (rc < 0) { + dev_err(&(dev->dev), "cannot allocate colormap\n"); + goto err_alloc_cmap; + } + + rc = register_framebuffer(info); + if (rc < 0) { + dev_err(&(dev->dev), "cannot register framebuffer\n"); + goto err_reg_fb; + } + + printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id, + pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000); + + if (par->chip == CHIP_UNKNOWN) + printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n", + info->node, vga_rcrt(NULL, 0x2d), vga_rcrt(NULL, 0x2e), + vga_rcrt(NULL, 0x2f), vga_rcrt(NULL, 0x30)); + + /* Record a reference to the driver data */ + pci_set_drvdata(dev, info); + +#ifdef CONFIG_MTRR + if (mtrr) { + par->mtrr_reg = -1; + par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1); + } +#endif + + return 0; + + /* Error handling */ +err_reg_fb: + fb_dealloc_cmap(&info->cmap); +err_alloc_cmap: +err_find_mode: + pci_iounmap(dev, info->screen_base); +err_iomap: + pci_release_regions(dev); +err_request_regions: +/* pci_disable_device(dev); */ +err_enable_device: + framebuffer_release(info); + return rc; +} + + +/* PCI remove */ + +static void __devexit s3_pci_remove(struct pci_dev *dev) +{ + struct fb_info *info = pci_get_drvdata(dev); + struct s3fb_info *par = info->par; + + if (info) { + +#ifdef CONFIG_MTRR + if (par->mtrr_reg >= 0) { + mtrr_del(par->mtrr_reg, 0, 0); + par->mtrr_reg = -1; + } +#endif + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + + pci_iounmap(dev, info->screen_base); + pci_release_regions(dev); +/* pci_disable_device(dev); */ + + pci_set_drvdata(dev, NULL); + framebuffer_release(info); + } +} + +/* PCI suspend */ + +static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state) +{ + struct fb_info *info = pci_get_drvdata(dev); + struct s3fb_info *par = info->par; + + dev_info(&(dev->dev), "suspend\n"); + + acquire_console_sem(); + mutex_lock(&(par->open_lock)); + + if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) { + mutex_unlock(&(par->open_lock)); + release_console_sem(); + return 0; + } + + fb_set_suspend(info, 1); + + pci_save_state(dev); + pci_disable_device(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + + mutex_unlock(&(par->open_lock)); + release_console_sem(); + + return 0; +} + + +/* PCI resume */ + +static int s3_pci_resume(struct pci_dev* dev) +{ + struct fb_info *info = pci_get_drvdata(dev); + struct s3fb_info *par = info->par; + + dev_info(&(dev->dev), "resume\n"); + + acquire_console_sem(); + mutex_lock(&(par->open_lock)); + + if (par->ref_count == 0) { + mutex_unlock(&(par->open_lock)); + release_console_sem(); + return 0; + } + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + pci_enable_device(dev); + pci_set_master(dev); + + s3fb_set_par(info); + fb_set_suspend(info, 0); + + mutex_unlock(&(par->open_lock)); + release_console_sem(); + + return 0; +} + + +/* List of boards that we are trying to support */ + +static struct pci_device_id s3_devices[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX}, + + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_356_VIRGE_GX2}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_357_VIRGE_GX2P}, + {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P}, + + {0, 0, 0, 0, 0, 0, 0} +}; + + +MODULE_DEVICE_TABLE(pci, s3_devices); + +static struct pci_driver s3fb_pci_driver = { + .name = "s3fb", + .id_table = s3_devices, + .probe = s3_pci_probe, + .remove = __devexit_p(s3_pci_remove), + .suspend = s3_pci_suspend, + .resume = s3_pci_resume, +}; + +/* Parse user speficied options */ + +#ifndef MODULE +static int __init s3fb_setup(char *options) +{ + char *opt; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + + if (!*opt) + continue; +#ifdef CONFIG_MTRR + else if (!strcmp(opt, "mtrr:")) + mtrr = simple_strtoul(opt + 5, NULL, 0); +#endif + else if (!strcmp(opt, "fasttext:")) + mtrr = simple_strtoul(opt + 9, NULL, 0); + else + mode = opt; + } + + return 0; +} +#endif + +/* Cleanup */ + +static void __exit s3fb_cleanup(void) +{ + pr_debug("s3fb: cleaning up\n"); + pci_unregister_driver(&s3fb_pci_driver); +} + +/* Driver Initialisation */ + +static int __init s3fb_init(void) +{ + +#ifndef MODULE + char *option = NULL; + + if (fb_get_options("s3fb", &option)) + return -ENODEV; + s3fb_setup(option); +#endif + + pr_debug("s3fb: initializing\n"); + return pci_register_driver(&s3fb_pci_driver); +} + +/* ------------------------------------------------------------------------- */ + +/* Modularization */ + +module_init(s3fb_init); +module_exit(s3fb_cleanup); diff --git a/drivers/video/svgalib.c b/drivers/video/svgalib.c new file mode 100644 index 0000000..68b30d9 --- /dev/null +++ b/drivers/video/svgalib.c @@ -0,0 +1,632 @@ +/* + * Common utility functions for VGA-based graphics cards. + * + * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Some parts are based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <linux/svga.h> +#include <linux/slab.h> +#include <asm/types.h> +#include <asm/io.h> + + +/* Write a CRT register value spread across multiple registers */ +void svga_wcrt_multi(const struct vga_regset *regset, u32 value) { + + u8 regval, bitval, bitnum; + + while (regset->regnum != VGA_REGSET_END_VAL) { + regval = vga_rcrt(NULL, regset->regnum); + bitnum = regset->lowbit; + while (bitnum <= regset->highbit) { + bitval = 1 << bitnum; + regval = regval & ~bitval; + if (value & 1) regval = regval | bitval; + bitnum ++; + value = value >> 1; + } + vga_wcrt(NULL, regset->regnum, regval); + regset ++; + } +} + +/* Write a sequencer register value spread across multiple registers */ +void svga_wseq_multi(const struct vga_regset *regset, u32 value) { + + u8 regval, bitval, bitnum; + + while (regset->regnum != VGA_REGSET_END_VAL) { + regval = vga_rseq(NULL, regset->regnum); + bitnum = regset->lowbit; + while (bitnum <= regset->highbit) { + bitval = 1 << bitnum; + regval = regval & ~bitval; + if (value & 1) regval = regval | bitval; + bitnum ++; + value = value >> 1; + } + vga_wseq(NULL, regset->regnum, regval); + regset ++; + } +} + +static unsigned int svga_regset_size(const struct vga_regset *regset) +{ + u8 count = 0; + + while (regset->regnum != VGA_REGSET_END_VAL) { + count += regset->highbit - regset->lowbit + 1; + regset ++; + } + return 1 << count; +} + + +/* ------------------------------------------------------------------------- */ + + +/* Set graphics controller registers to sane values */ +void svga_set_default_gfx_regs(void) +{ + /* All standard GFX registers (GR00 - GR08) */ + vga_wgfx(NULL, VGA_GFX_SR_VALUE, 0x00); + vga_wgfx(NULL, VGA_GFX_SR_ENABLE, 0x00); + vga_wgfx(NULL, VGA_GFX_COMPARE_VALUE, 0x00); + vga_wgfx(NULL, VGA_GFX_DATA_ROTATE, 0x00); + vga_wgfx(NULL, VGA_GFX_PLANE_READ, 0x00); + vga_wgfx(NULL, VGA_GFX_MODE, 0x00); +/* vga_wgfx(NULL, VGA_GFX_MODE, 0x20); */ +/* vga_wgfx(NULL, VGA_GFX_MODE, 0x40); */ + vga_wgfx(NULL, VGA_GFX_MISC, 0x05); +/* vga_wgfx(NULL, VGA_GFX_MISC, 0x01); */ + vga_wgfx(NULL, VGA_GFX_COMPARE_MASK, 0x0F); + vga_wgfx(NULL, VGA_GFX_BIT_MASK, 0xFF); +} + +/* Set attribute controller registers to sane values */ +void svga_set_default_atc_regs(void) +{ + u8 count; + + vga_r(NULL, 0x3DA); + vga_w(NULL, VGA_ATT_W, 0x00); + + /* All standard ATC registers (AR00 - AR14) */ + for (count = 0; count <= 0xF; count ++) + svga_wattr(count, count); + + svga_wattr(VGA_ATC_MODE, 0x01); +/* svga_wattr(VGA_ATC_MODE, 0x41); */ + svga_wattr(VGA_ATC_OVERSCAN, 0x00); + svga_wattr(VGA_ATC_PLANE_ENABLE, 0x0F); + svga_wattr(VGA_ATC_PEL, 0x00); + svga_wattr(VGA_ATC_COLOR_PAGE, 0x00); + + vga_r(NULL, 0x3DA); + vga_w(NULL, VGA_ATT_W, 0x20); +} + +/* Set sequencer registers to sane values */ +void svga_set_default_seq_regs(void) +{ + /* Standard sequencer registers (SR01 - SR04), SR00 is not set */ + vga_wseq(NULL, VGA_SEQ_CLOCK_MODE, VGA_SR01_CHAR_CLK_8DOTS); + vga_wseq(NULL, VGA_SEQ_PLANE_WRITE, VGA_SR02_ALL_PLANES); + vga_wseq(NULL, VGA_SEQ_CHARACTER_MAP, 0x00); +/* vga_wseq(NULL, VGA_SEQ_MEMORY_MODE, VGA_SR04_EXT_MEM | VGA_SR04_SEQ_MODE | VGA_SR04_CHN_4M); */ + vga_wseq(NULL, VGA_SEQ_MEMORY_MODE, VGA_SR04_EXT_MEM | VGA_SR04_SEQ_MODE); +} + +/* Set CRTC registers to sane values */ +void svga_set_default_crt_regs(void) +{ + /* Standard CRT registers CR03 CR08 CR09 CR14 CR17 */ + svga_wcrt_mask(0x03, 0x80, 0x80); /* Enable vertical retrace EVRA */ + vga_wcrt(NULL, VGA_CRTC_PRESET_ROW, 0); + svga_wcrt_mask(VGA_CRTC_MAX_SCAN, 0, 0x1F); + vga_wcrt(NULL, VGA_CRTC_UNDERLINE, 0); + vga_wcrt(NULL, VGA_CRTC_MODE, 0xE3); +} + +void svga_set_textmode_vga_regs(void) +{ + /* svga_wseq_mask(0x1, 0x00, 0x01); */ /* Switch 8/9 pixel per char */ + vga_wseq(NULL, VGA_SEQ_MEMORY_MODE, VGA_SR04_EXT_MEM); + vga_wseq(NULL, VGA_SEQ_PLANE_WRITE, 0x03); + + vga_wcrt(NULL, VGA_CRTC_MAX_SCAN, 0x0f); /* 0x4f */ + vga_wcrt(NULL, VGA_CRTC_UNDERLINE, 0x1f); + svga_wcrt_mask(VGA_CRTC_MODE, 0x23, 0x7f); + + vga_wcrt(NULL, VGA_CRTC_CURSOR_START, 0x0d); + vga_wcrt(NULL, VGA_CRTC_CURSOR_END, 0x0e); + vga_wcrt(NULL, VGA_CRTC_CURSOR_HI, 0x00); + vga_wcrt(NULL, VGA_CRTC_CURSOR_LO, 0x00); + + vga_wgfx(NULL, VGA_GFX_MODE, 0x10); /* Odd/even memory mode */ + vga_wgfx(NULL, VGA_GFX_MISC, 0x0E); /* Misc graphics register - text mode enable */ + vga_wgfx(NULL, VGA_GFX_COMPARE_MASK, 0x00); + + vga_r(NULL, 0x3DA); + vga_w(NULL, VGA_ATT_W, 0x00); + + svga_wattr(0x10, 0x0C); /* Attribute Mode Control Register - text mode, blinking and line graphics */ + svga_wattr(0x13, 0x08); /* Horizontal Pixel Panning Register */ + + vga_r(NULL, 0x3DA); + vga_w(NULL, VGA_ATT_W, 0x20); +} + +#if 0 +void svga_dump_var(struct fb_var_screeninfo *var, int node) +{ + pr_debug("fb%d: var.vmode : 0x%X\n", node, var->vmode); + pr_debug("fb%d: var.xres : %d\n", node, var->xres); + pr_debug("fb%d: var.yres : %d\n", node, var->yres); + pr_debug("fb%d: var.bits_per_pixel: %d\n", node, var->bits_per_pixel); + pr_debug("fb%d: var.xres_virtual : %d\n", node, var->xres_virtual); + pr_debug("fb%d: var.yres_virtual : %d\n", node, var->yres_virtual); + pr_debug("fb%d: var.left_margin : %d\n", node, var->left_margin); + pr_debug("fb%d: var.right_margin : %d\n", node, var->right_margin); + pr_debug("fb%d: var.upper_margin : %d\n", node, var->upper_margin); + pr_debug("fb%d: var.lower_margin : %d\n", node, var->lower_margin); + pr_debug("fb%d: var.hsync_len : %d\n", node, var->hsync_len); + pr_debug("fb%d: var.vsync_len : %d\n", node, var->vsync_len); + pr_debug("fb%d: var.sync : 0x%X\n", node, var->sync); + pr_debug("fb%d: var.pixclock : %d\n\n", node, var->pixclock); +} +#endif /* 0 */ + + +/* ------------------------------------------------------------------------- */ + + +void svga_settile(struct fb_info *info, struct fb_tilemap *map) +{ + const u8 *font = map->data; + u8* fb = (u8 *) info->screen_base; + int i, c; + + if ((map->width != 8) || (map->height != 16) || + (map->depth != 1) || (map->length != 256)) { + printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n", + info->node, map->width, map->height, map->depth, map->length); + return; + } + + fb += 2; + for (c = 0; c < map->length; c++) { + for (i = 0; i < map->height; i++) { + fb[i * 4] = font[i]; + } + fb += 128; + font += map->height; + } +} + +/* Copy area in text (tileblit) mode */ +void svga_tilecopy(struct fb_info *info, struct fb_tilearea *area) +{ + int dx, dy; + /* colstride is halved in this function because u16 are used */ + int colstride = 1 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); + int rowstride = colstride * (info->var.xres_virtual / 8); + u16 *fb = (u16 *) info->screen_base; + u16 *src, *dst; + + if ((area->sy > area->dy) || + ((area->sy == area->dy) && (area->sx > area->dx))) { + src = fb + area->sx * colstride + area->sy * rowstride; + dst = fb + area->dx * colstride + area->dy * rowstride; + } else { + src = fb + (area->sx + area->width - 1) * colstride + + (area->sy + area->height - 1) * rowstride; + dst = fb + (area->dx + area->width - 1) * colstride + + (area->dy + area->height - 1) * rowstride; + + colstride = -colstride; + rowstride = -rowstride; + } + + for (dy = 0; dy < area->height; dy++) { + u16* src2 = src; + u16* dst2 = dst; + for (dx = 0; dx < area->width; dx++) { + *dst2 = *src2; + src2 += colstride; + dst2 += colstride; + } + src += rowstride; + dst += rowstride; + } +} + +/* Fill area in text (tileblit) mode */ +void svga_tilefill(struct fb_info *info, struct fb_tilerect *rect) +{ + int dx, dy; + int colstride = 2 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); + int rowstride = colstride * (info->var.xres_virtual / 8); + int attr = (0x0F & rect->bg) << 4 | (0x0F & rect->fg); + u8 *fb = (u8 *) info->screen_base; + fb += rect->sx * colstride + rect->sy * rowstride; + + for (dy = 0; dy < rect->height; dy++) { + u8* fb2 = fb; + for (dx = 0; dx < rect->width; dx++) { + fb2[0] = rect->index; + fb2[1] = attr; + fb2 += colstride; + } + fb += rowstride; + } +} + +/* Write text in text (tileblit) mode */ +void svga_tileblit(struct fb_info *info, struct fb_tileblit *blit) +{ + int dx, dy, i; + int colstride = 2 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); + int rowstride = colstride * (info->var.xres_virtual / 8); + int attr = (0x0F & blit->bg) << 4 | (0x0F & blit->fg); + u8* fb = (u8 *) info->screen_base; + fb += blit->sx * colstride + blit->sy * rowstride; + + i=0; + for (dy=0; dy < blit->height; dy ++) { + u8* fb2 = fb; + for (dx = 0; dx < blit->width; dx ++) { + fb2[0] = blit->indices[i]; + fb2[1] = attr; + fb2 += colstride; + i ++; + if (i == blit->length) return; + } + fb += rowstride; + } + +} + +/* Set cursor in text (tileblit) mode */ +void svga_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor) +{ + u8 cs = 0x0d; + u8 ce = 0x0e; + u16 pos = cursor->sx + (info->var.xoffset / 8) + + (cursor->sy + (info->var.yoffset / 16)) + * (info->var.xres_virtual / 8); + + if (! cursor -> mode) + return; + + svga_wcrt_mask(0x0A, 0x20, 0x20); /* disable cursor */ + + if (cursor -> shape == FB_TILE_CURSOR_NONE) + return; + + switch (cursor -> shape) { + case FB_TILE_CURSOR_UNDERLINE: + cs = 0x0d; + break; + case FB_TILE_CURSOR_LOWER_THIRD: + cs = 0x09; + break; + case FB_TILE_CURSOR_LOWER_HALF: + cs = 0x07; + break; + case FB_TILE_CURSOR_TWO_THIRDS: + cs = 0x05; + break; + case FB_TILE_CURSOR_BLOCK: + cs = 0x01; + break; + } + + /* set cursor position */ + vga_wcrt(NULL, 0x0E, pos >> 8); + vga_wcrt(NULL, 0x0F, pos & 0xFF); + + vga_wcrt(NULL, 0x0B, ce); /* set cursor end */ + vga_wcrt(NULL, 0x0A, cs); /* set cursor start and enable it */ +} + + +/* ------------------------------------------------------------------------- */ + + +/* + * Compute PLL settings (M, N, R) + * F_VCO = (F_BASE * M) / N + * F_OUT = F_VCO / (2^R) + */ + +static inline u32 abs_diff(u32 a, u32 b) +{ + return (a > b) ? (a - b) : (b - a); +} + +int svga_compute_pll(const struct svga_pll *pll, u32 f_wanted, u16 *m, u16 *n, u16 *r, int node) +{ + u16 am, an, ar; + u32 f_vco, f_current, delta_current, delta_best; + + pr_debug("fb%d: ideal frequency: %d kHz\n", node, (unsigned int) f_wanted); + + ar = pll->r_max; + f_vco = f_wanted << ar; + + /* overflow check */ + if ((f_vco >> ar) != f_wanted) + return -EINVAL; + + /* It is usually better to have greater VCO clock + because of better frequency stability. + So first try r_max, then r smaller. */ + while ((ar > pll->r_min) && (f_vco > pll->f_vco_max)) { + ar--; + f_vco = f_vco >> 1; + } + + /* VCO bounds check */ + if ((f_vco < pll->f_vco_min) || (f_vco > pll->f_vco_max)) + return -EINVAL; + + delta_best = 0xFFFFFFFF; + *m = 0; + *n = 0; + *r = ar; + + am = pll->m_min; + an = pll->n_min; + + while ((am <= pll->m_max) && (an <= pll->n_max)) { + f_current = (pll->f_base * am) / an; + delta_current = abs_diff (f_current, f_vco); + + if (delta_current < delta_best) { + delta_best = delta_current; + *m = am; + *n = an; + } + + if (f_current <= f_vco) { + am ++; + } else { + an ++; + } + } + + f_current = (pll->f_base * *m) / *n; + pr_debug("fb%d: found frequency: %d kHz (VCO %d kHz)\n", node, (int) (f_current >> ar), (int) f_current); + pr_debug("fb%d: m = %d n = %d r = %d\n", node, (unsigned int) *m, (unsigned int) *n, (unsigned int) *r); + return 0; +} + + +/* ------------------------------------------------------------------------- */ + + +/* Check CRT timing values */ +int svga_check_timings(const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, int node) +{ + u32 value; + + var->xres = (var->xres+7)&~7; + var->left_margin = (var->left_margin+7)&~7; + var->right_margin = (var->right_margin+7)&~7; + var->hsync_len = (var->hsync_len+7)&~7; + + /* Check horizontal total */ + value = var->xres + var->left_margin + var->right_margin + var->hsync_len; + if (((value / 8) - 5) >= svga_regset_size (tm->h_total_regs)) + return -EINVAL; + + /* Check horizontal display and blank start */ + value = var->xres; + if (((value / 8) - 1) >= svga_regset_size (tm->h_display_regs)) + return -EINVAL; + if (((value / 8) - 1) >= svga_regset_size (tm->h_blank_start_regs)) + return -EINVAL; + + /* Check horizontal sync start */ + value = var->xres + var->right_margin; + if (((value / 8) - 1) >= svga_regset_size (tm->h_sync_start_regs)) + return -EINVAL; + + /* Check horizontal blank end (or length) */ + value = var->left_margin + var->right_margin + var->hsync_len; + if ((value == 0) || ((value / 8) >= svga_regset_size (tm->h_blank_end_regs))) + return -EINVAL; + + /* Check horizontal sync end (or length) */ + value = var->hsync_len; + if ((value == 0) || ((value / 8) >= svga_regset_size (tm->h_sync_end_regs))) + return -EINVAL; + + /* Check vertical total */ + value = var->yres + var->upper_margin + var->lower_margin + var->vsync_len; + if ((value - 1) >= svga_regset_size(tm->v_total_regs)) + return -EINVAL; + + /* Check vertical display and blank start */ + value = var->yres; + if ((value - 1) >= svga_regset_size(tm->v_display_regs)) + return -EINVAL; + if ((value - 1) >= svga_regset_size(tm->v_blank_start_regs)) + return -EINVAL; + + /* Check vertical sync start */ + value = var->yres + var->lower_margin; + if ((value - 1) >= svga_regset_size(tm->v_sync_start_regs)) + return -EINVAL; + + /* Check vertical blank end (or length) */ + value = var->upper_margin + var->lower_margin + var->vsync_len; + if ((value == 0) || (value >= svga_regset_size (tm->v_blank_end_regs))) + return -EINVAL; + + /* Check vertical sync end (or length) */ + value = var->vsync_len; + if ((value == 0) || (value >= svga_regset_size (tm->v_sync_end_regs))) + return -EINVAL; + + return 0; +} + +/* Set CRT timing registers */ +void svga_set_timings(const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, + u32 hmul, u32 hdiv, u32 vmul, u32 vdiv, u32 hborder, int node) +{ + u8 regval; + u32 value; + + value = var->xres + var->left_margin + var->right_margin + var->hsync_len; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal total : %d\n", node, value); + svga_wcrt_multi(tm->h_total_regs, (value / 8) - 5); + + value = var->xres; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal display : %d\n", node, value); + svga_wcrt_multi(tm->h_display_regs, (value / 8) - 1); + + value = var->xres; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal blank start: %d\n", node, value); + svga_wcrt_multi(tm->h_blank_start_regs, (value / 8) - 1 + hborder); + + value = var->xres + var->left_margin + var->right_margin + var->hsync_len; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal blank end : %d\n", node, value); + svga_wcrt_multi(tm->h_blank_end_regs, (value / 8) - 1 - hborder); + + value = var->xres + var->right_margin; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal sync start : %d\n", node, value); + svga_wcrt_multi(tm->h_sync_start_regs, (value / 8)); + + value = var->xres + var->right_margin + var->hsync_len; + value = (value * hmul) / hdiv; + pr_debug("fb%d: horizontal sync end : %d\n", node, value); + svga_wcrt_multi(tm->h_sync_end_regs, (value / 8)); + + value = var->yres + var->upper_margin + var->lower_margin + var->vsync_len; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical total : %d\n", node, value); + svga_wcrt_multi(tm->v_total_regs, value - 2); + + value = var->yres; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical display : %d\n", node, value); + svga_wcrt_multi(tm->v_display_regs, value - 1); + + value = var->yres; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical blank start : %d\n", node, value); + svga_wcrt_multi(tm->v_blank_start_regs, value); + + value = var->yres + var->upper_margin + var->lower_margin + var->vsync_len; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical blank end : %d\n", node, value); + svga_wcrt_multi(tm->v_blank_end_regs, value - 2); + + value = var->yres + var->lower_margin; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical sync start : %d\n", node, value); + svga_wcrt_multi(tm->v_sync_start_regs, value); + + value = var->yres + var->lower_margin + var->vsync_len; + value = (value * vmul) / vdiv; + pr_debug("fb%d: vertical sync end : %d\n", node, value); + svga_wcrt_multi(tm->v_sync_end_regs, value); + + /* Set horizontal and vertical sync pulse polarity in misc register */ + + regval = vga_r(NULL, VGA_MIS_R); + if (var->sync & FB_SYNC_HOR_HIGH_ACT) { + pr_debug("fb%d: positive horizontal sync\n", node); + regval = regval & ~0x80; + } else { + pr_debug("fb%d: negative horizontal sync\n", node); + regval = regval | 0x80; + } + if (var->sync & FB_SYNC_VERT_HIGH_ACT) { + pr_debug("fb%d: positive vertical sync\n", node); + regval = regval & ~0x40; + } else { + pr_debug("fb%d: negative vertical sync\n\n", node); + regval = regval | 0x40; + } + vga_w(NULL, VGA_MIS_W, regval); +} + + +/* ------------------------------------------------------------------------- */ + + +int svga_match_format(const struct svga_fb_format *frm, struct fb_var_screeninfo *var, struct fb_fix_screeninfo *fix) +{ + int i = 0; + + while (frm->bits_per_pixel != SVGA_FORMAT_END_VAL) + { + if ((var->bits_per_pixel == frm->bits_per_pixel) && + (var->red.length <= frm->red.length) && + (var->green.length <= frm->green.length) && + (var->blue.length <= frm->blue.length) && + (var->transp.length <= frm->transp.length) && + (var->nonstd == frm->nonstd)) { + var->bits_per_pixel = frm->bits_per_pixel; + var->red = frm->red; + var->green = frm->green; + var->blue = frm->blue; + var->transp = frm->transp; + var->nonstd = frm->nonstd; + if (fix != NULL) { + fix->type = frm->type; + fix->type_aux = frm->type_aux; + fix->visual = frm->visual; + fix->xpanstep = frm->xpanstep; + } + return i; + } + i++; + frm++; + } + return -EINVAL; +} + + +EXPORT_SYMBOL(svga_wcrt_multi); +EXPORT_SYMBOL(svga_wseq_multi); + +EXPORT_SYMBOL(svga_set_default_gfx_regs); +EXPORT_SYMBOL(svga_set_default_atc_regs); +EXPORT_SYMBOL(svga_set_default_seq_regs); +EXPORT_SYMBOL(svga_set_default_crt_regs); +EXPORT_SYMBOL(svga_set_textmode_vga_regs); + +EXPORT_SYMBOL(svga_settile); +EXPORT_SYMBOL(svga_tilecopy); +EXPORT_SYMBOL(svga_tilefill); +EXPORT_SYMBOL(svga_tileblit); +EXPORT_SYMBOL(svga_tilecursor); + +EXPORT_SYMBOL(svga_compute_pll); +EXPORT_SYMBOL(svga_check_timings); +EXPORT_SYMBOL(svga_set_timings); +EXPORT_SYMBOL(svga_match_format); + +MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>"); +MODULE_DESCRIPTION("Common utility functions for VGA-based graphics cards"); +MODULE_LICENSE("GPL"); |