diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-11-11 07:49:45 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-11-11 07:49:45 (GMT) |
commit | aac59e3efce3dca787b11e34726001603ce3d161 (patch) | |
tree | 855d3f967b102877a179e23382be3c2c7fc8d66c /drivers | |
parent | 21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff) | |
parent | 005ff5fb077ebf93882bd643932f932a9b402529 (diff) | |
download | linux-fsl-qoriq-aac59e3efce3dca787b11e34726001603ce3d161.tar.xz |
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Among the things new for this release
are:
- More support for the AM33xx platforms from TI
- Tegra 124 support, and some updates to older tegra families as well
- imx cleanups and updates across the board
- A rename of Broadcom's Mobile platforms which were introduced as
ARCH_BCM, and turned out to be too broad a name. New name is
ARCH_BCM_MOBILE.
- A whole bunch of updates and fixes for integrator, making the
platform code more modern and switches over to DT-only booting.
- Support for two new Renesas shmobile chipsets. Next up for them is
more work on consolidation instead of introduction of new
non-multiplatform SoCs, we're all looking forward to that!
- Misc cleanups for older Samsung platforms, some Allwinner updates,
etc"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
ARM: bcm_defconfig: Run "make savedefconfig"
ARM: bcm281xx: Add ARCH Timers to config
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
ARM: vexpress: Enable platform-specific options in defconfig
ARM: vexpress: Make defconfig work again
ARM: sunxi: remove .init_time hooks
ARM: imx: enable suspend for imx6sl
ARM: imx: ensure dsm_request signal is not asserted when setting LPM
ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
ARM: imx6q: move low-power code out of clock driver
ARM: imx: drop extern with function prototypes in common.h
ARM: imx: reset core along with enable/disable operation
ARM: imx: do not return from imx_cpu_die() call
ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
ARM: imx: replace imx6q_restart() with mxc_restart()
ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/clk/samsung/Makefile | 2 | ||||
-rw-r--r-- | drivers/cpufreq/integrator-cpufreq.c | 61 | ||||
-rw-r--r-- | drivers/cpuidle/Kconfig.arm | 2 | ||||
-rw-r--r-- | drivers/cpuidle/cpuidle-calxeda.c | 61 | ||||
-rw-r--r-- | drivers/dma/Kconfig | 2 | ||||
-rw-r--r-- | drivers/usb/host/ohci-s3c2410.c | 8 |
6 files changed, 71 insertions, 65 deletions
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 3413380..8eb4799 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,6 +8,4 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o -ifdef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o -endif diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c index f7c99df..3d79bca 100644 --- a/drivers/cpufreq/integrator-cpufreq.c +++ b/drivers/cpufreq/integrator-cpufreq.c @@ -15,18 +15,19 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> -#include <mach/hardware.h> -#include <mach/platform.h> #include <asm/mach-types.h> #include <asm/hardware/icst.h> -static struct cpufreq_driver integrator_driver; +static void __iomem *cm_base; +/* The cpufreq driver only use the OSC register */ +#define INTEGRATOR_HDR_OSC_OFFSET 0x08 +#define INTEGRATOR_HDR_LOCK_OFFSET 0x14 -#define CM_ID __io_address(INTEGRATOR_HDR_ID) -#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) -#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) -#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) +static struct cpufreq_driver integrator_driver; static const struct icst_params lclk_params = { .ref = 24000000, @@ -100,7 +101,7 @@ static int integrator_set_target(struct cpufreq_policy *policy, BUG_ON(cpu != smp_processor_id()); /* get current setting */ - cm_osc = __raw_readl(CM_OSC); + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); if (machine_is_integrator()) { vco.s = (cm_osc >> 8) & 7; @@ -128,7 +129,7 @@ static int integrator_set_target(struct cpufreq_policy *policy, cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - cm_osc = __raw_readl(CM_OSC); + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); if (machine_is_integrator()) { cm_osc &= 0xfffff800; @@ -138,9 +139,9 @@ static int integrator_set_target(struct cpufreq_policy *policy, } cm_osc |= vco.v; - __raw_writel(0xa05f, CM_LOCK); - __raw_writel(cm_osc, CM_OSC); - __raw_writel(0, CM_LOCK); + __raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET); + __raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET); + __raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET); /* * Restore the CPUs allowed mask. @@ -165,7 +166,7 @@ static unsigned int integrator_get(unsigned int cpu) BUG_ON(cpu != smp_processor_id()); /* detect memory etc. */ - cm_osc = __raw_readl(CM_OSC); + cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET); if (machine_is_integrator()) { vco.s = (cm_osc >> 8) & 7; @@ -202,19 +203,43 @@ static struct cpufreq_driver integrator_driver = { .name = "integrator", }; -static int __init integrator_cpu_init(void) +static int __init integrator_cpufreq_probe(struct platform_device *pdev) { + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!cm_base) + return -ENODEV; + return cpufreq_register_driver(&integrator_driver); } -static void __exit integrator_cpu_exit(void) +static void __exit integrator_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&integrator_driver); } +static const struct of_device_id integrator_cpufreq_match[] = { + { .compatible = "arm,core-module-integrator"}, + { }, +}; + +static struct platform_driver integrator_cpufreq_driver = { + .driver = { + .name = "integrator-cpufreq", + .owner = THIS_MODULE, + .of_match_table = integrator_cpufreq_match, + }, + .remove = __exit_p(integrator_cpufreq_remove), +}; + +module_platform_driver_probe(integrator_cpufreq_driver, + integrator_cpufreq_probe); + MODULE_AUTHOR ("Russell M. King"); MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs"); MODULE_LICENSE ("GPL"); - -module_init(integrator_cpu_init); -module_exit(integrator_cpu_exit); diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 8e36603..d6f57d5 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -4,7 +4,7 @@ config ARM_HIGHBANK_CPUIDLE bool "CPU Idle Driver for Calxeda processors" - depends on ARCH_HIGHBANK + depends on ARM_PSCI select ARM_CPU_SUSPEND help Select this to enable cpuidle on Calxeda processors. diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c index 3460584..3679563 100644 --- a/drivers/cpuidle/cpuidle-calxeda.c +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -21,53 +21,30 @@ */ #include <linux/cpuidle.h> +#include <linux/cpu_pm.h> #include <linux/init.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/time.h> -#include <linux/delay.h> -#include <linux/suspend.h> +#include <linux/mm.h> +#include <linux/platform_device.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> #include <asm/suspend.h> -#include <asm/cacheflush.h> -#include <asm/cp15.h> - -extern void highbank_set_cpu_jump(int cpu, void *jump_addr); -extern void __iomem *scu_base_addr; - -static noinline void calxeda_idle_restore(void) -{ - set_cr(get_cr() | CR_C); - set_auxcr(get_auxcr() | 0x40); - scu_power_mode(scu_base_addr, SCU_PM_NORMAL); -} +#include <asm/psci.h> static int calxeda_idle_finish(unsigned long val) { - /* Already flushed cache, but do it again as the outer cache functions - * dirty the cache with spinlocks */ - flush_cache_all(); - - set_auxcr(get_auxcr() & ~0x40); - set_cr(get_cr() & ~CR_C); - - scu_power_mode(scu_base_addr, SCU_PM_DORMANT); - - cpu_do_idle(); - - /* Restore things if we didn't enter power-gating */ - calxeda_idle_restore(); - return 1; + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + return psci_ops.cpu_suspend(ps, __pa(cpu_resume)); } static int calxeda_pwrdown_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - highbank_set_cpu_jump(smp_processor_id(), cpu_resume); + cpu_pm_enter(); cpu_suspend(0, calxeda_idle_finish); + cpu_pm_exit(); + return index; } @@ -88,11 +65,17 @@ static struct cpuidle_driver calxeda_idle_driver = { .state_count = 2, }; -static int __init calxeda_cpuidle_init(void) +static int __init calxeda_cpuidle_probe(struct platform_device *pdev) { - if (!of_machine_is_compatible("calxeda,highbank")) - return -ENODEV; - return cpuidle_register(&calxeda_idle_driver, NULL); } -module_init(calxeda_cpuidle_init); + +static struct platform_driver calxeda_cpuidle_plat_driver = { + .driver = { + .name = "cpuidle-calxeda", + .owner = THIS_MODULE, + }, + .probe = calxeda_cpuidle_probe, +}; + +module_platform_driver(calxeda_cpuidle_plat_driver); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f238cfd..56fe803 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -195,7 +195,7 @@ config SIRF_DMA config TI_EDMA bool "TI EDMA support" - depends on ARCH_DAVINCI || ARCH_OMAP + depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE select DMA_ENGINE select DMA_VIRTUAL_CHANNELS select TI_PRIV_EDMA diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index be3429e..f90101b 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -64,10 +64,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); - clk_enable(usb_clk); + clk_prepare_enable(usb_clk); mdelay(2); /* let the bus clock stabilise */ - clk_enable(clk); + clk_prepare_enable(clk); if (info != NULL) { info->hcd = hcd; @@ -92,8 +92,8 @@ static void s3c2410_stop_hc(struct platform_device *dev) (info->enable_oc)(info, 0); } - clk_disable(clk); - clk_disable(usb_clk); + clk_disable_unprepare(clk); + clk_disable_unprepare(usb_clk); } /* ohci_s3c2410_hub_status_data |