Staging: w35und: remove unused bssdscpt.h header

The bssdscpt.h header file contains definitions that are not actually used for
anything.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 1 insertions, 185 deletions

diff --git a/drivers/staging/winbond/bssdscpt.h b/drivers/staging/winbond/bssdscpt.h
deleted file mode 100644
index 3a71d4e..0000000
--- a/drivers/staging/winbond/bssdscpt.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef __WINBOND_BSSDSCPT_H
-#define __WINBOND_BSSDSCPT_H
-
-#include <linux/types.h>
-
-#include "mds_s.h"
-#include "mlme_s.h"
-
-//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-//	bssdscpt.c
-//		BSS descriptor data base
-//	history :
-//
-//	Description:
-//		BSS descriptor data base will store the information of the stations at the
-//		surrounding environment. The first entry( psBSS(0) ) will not be used and the
-//		second one( psBSS(1) ) will be used for the broadcast address.
-//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-//#define MAX_ACC_RSSI_COUNT		10
-#define MAX_ACC_RSSI_COUNT		6
-
-///////////////////////////////////////////////////////////////////////////
-//
-// BSS Description set Element , to store scan received Beacon information
-//
-// Our's differs slightly from the specs. The specify a PHY_Parameter_Set.
-// Since we're only doing a DS design right now, we just have a DS structure.
-//////////////////////////////////////////////////////////////////////////////
-typedef struct BSSDescriptionElement
-{
-	u32		SlotValid;
-	u32		PowerSaveMode;
-	RXLAYER1	RxLayer1;
-
-    u8		abPeerAddress[ MAC_ADDR_LENGTH + 2 ]; // peer MAC Address associated with this session. 6-OCTET value
-    u32		dwBgScanStamp;		// BgScan Sequence Counter stamp, record psROAM->dwScanCounter.
-
-	u16		Beacon_Period;
-	u16		wATIM_Window;
-
-    u8		abBssID[ MAC_ADDR_LENGTH + 2 ];				// 6B
-
-    u8		bBssType;
-    u8		DTIM_Period;        // 1 octet usually from TIM element, if present
-	u8		boInTimerHandler;
-	u8		boERP;			// analysis ERP or (extended) supported rate element
-
-	u8		Timestamp[8];
-	u8		BasicRate[32];
-	u8		OperationalRate[32];
-	u32		dwBasicRateBitmap;			//bit map, retrieve from SupportedRateSet
-	u32		dwOperationalRateBitmap;	//bit map, retrieve from SupportedRateSet and
-										// ExtendedSupportedRateSet
-	// For RSSI calculating
-	u32		HalRssi[MAX_ACC_RSSI_COUNT]; // Encode. It must use MACRO of HAL to get the LNA and AGC data
-	u32		HalRssiIndex;
-
-	////From beacon/probe response
-    struct SSID_Element SSID;				// 34B
-	u8	reserved_1[ 2 ];
-
-    struct Capability_Information_Element   CapabilityInformation;  // 2B
-	u8	reserved_2[ 2 ];
-
-    struct CF_Parameter_Set_Element    CF_Parameter_Set;		// 8B
-    struct IBSS_Parameter_Set_Element  IBSS_Parameter_Set;		// 4B
-    struct TIM_Element                 TIM_Element_Set; 			// 256B
-
-    struct DS_Parameter_Set_Element    DS_Parameter_Set;		// 3B
-	u8	reserved_3;
-
-	struct ERP_Information_Element		ERP_Information_Set;	// 3B
-	u8	reserved_4;
-
-    struct Supported_Rates_Element     SupportedRateSet;			// 10B
-	u8	reserved_5[2];
-
-	struct Extended_Supported_Rates_Element	ExtendedSupportedRateSet;	// 257B
-	u8	reserved_6[3];
-
-	u8	band;
-	u8	reserved_7[3];
-
-	// for MLME module
-    u16		wState;			// the current state of the system
-	u16		wIndex;			// THIS BSS element entry index
-
-	void*	psadapter;		// pointer to THIS adapter
-	struct timer_list timer;  // MLME timer
-
-    // Authentication
-    u16		wAuthAlgo;      // peer MAC MLME use Auth algorithm, default OPEN_AUTH
-    u16		wAuthSeqNum;    // current local MAC sendout AuthReq sequence number
-
-	u8		auth_challengeText[128];
-
-	////For XP:
-    u32		ies_len;		// information element length
-    u8		ies[256];		// information element
-
-	////For WPA
-	u8	RsnIe_Type[2];		//added by ws for distinguish WPA and WPA2 05/14/04
-	u8	RsnIe_len;
-    u8	Rsn_Num;
-
-    // to record the rsn cipher suites,addded by ws 09/05/04
-	SUITE_SELECTOR			group_cipher; // 4B
-	SUITE_SELECTOR			pairwise_key_cipher_suites[WLAN_MAX_PAIRWISE_CIPHER_SUITE_COUNT];
-	SUITE_SELECTOR			auth_key_mgt_suites[WLAN_MAX_AUTH_KEY_MGT_SUITE_LIST_COUNT];
-
-	u16					pairwise_key_cipher_suite_count;
-	u16					auth_key_mgt_suite_count;
-
-	u8					pairwise_key_cipher_suite_selected;
-	u8					auth_key_mgt_suite_selected;
-	u8					reserved_8[2];
-
-	struct RSN_Capability_Element  rsn_capabilities; // 2B
-	u8					reserved_9[2];
-
-    //to record the rsn cipher suites for WPA2
-    #ifdef _WPA2_
-	u32					pre_auth;		//added by WS for distinguish for 05/04/04
-    SUITE_SELECTOR			wpa2_group_cipher; // 4B
-	SUITE_SELECTOR			wpa2_pairwise_key_cipher_suites[WLAN_MAX_PAIRWISE_CIPHER_SUITE_COUNT];
-	SUITE_SELECTOR			wpa2_auth_key_mgt_suites[WLAN_MAX_AUTH_KEY_MGT_SUITE_LIST_COUNT];
-
-	u16					wpa2_pairwise_key_cipher_suite_count;
-	u16					wpa2_auth_key_mgt_suite_count;
-
-	u8					wpa2_pairwise_key_cipher_suite_selected;
-	u8					wpa2_auth_key_mgt_suite_selected;
-	u8					reserved_10[2];
-
-	struct RSN_Capability_Element  wpa2_rsn_capabilities; // 2B
-	u8					reserved_11[2];
-    #endif //endif _WPA2_
-
-	//For Replay protection
-//	u8		PairwiseTSC[6];
-//	u8		GroupTSC[6];
-
-	////For up-to-date
-	u32		ScanTimeStamp;	//for the decision whether the station/AP(may exist at
-							//different channels) has left. It must be detected by
-							//scanning. Local device may connected or disconnected.
-	u32		BssTimeStamp;	//Only for the decision whether the station/AP(exist in
-							//the same channel, and no scanning) if local device has
-							//connected successfully.
-
-	// 20061108 Add for storing WPS_IE. [E id][Length][OUI][Data]
-	u8		WPS_IE_Data[MAX_IE_APPEND_SIZE];
-	u16		WPS_IE_length;
-	u16		WPS_IE_length_tmp; // For verify there is an WPS_IE in Beacon or probe response
-
-} WB_BSSDESCRIPTION, *PWB_BSSDESCRIPTION;
-
-#define wBSSConnectedSTA(adapter)             \
-    ((u16)(adapter)->sLocalPara.wConnectedSTAindex)
-
-#define psBSS(i)			(&(adapter->asBSSDescriptElement[(i)]))
-
-#endif
diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h
index cd6a419..eb4c090 100644
--- a/drivers/staging/winbond/core.h
+++ b/drivers/staging/winbond/core.h
@@ -3,7 +3,7 @@
 
 #include <linux/wireless.h>
 
-#include "bssdscpt.h"
+#include "mlme_s.h"
 #include "wbhal_s.h"
 #include "mto.h"
 
@@ -15,7 +15,6 @@ struct wbsoft_priv {
 	u32 adapterIndex;	// 20060703.4 Add for using padapterContext global adapter point
 
 	WB_LOCALDESCRIPT sLocalPara;	// Myself connected parameters
-	PWB_BSSDESCRIPTION asBSSDescriptElement;
 
 	MLME_FRAME sMlmeFrame;	// connect to peerSTA parameters
 
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
index ebf61e3..0508588 100644
--- a/drivers/staging/winbond/mds_s.h
+++ b/drivers/staging/winbond/mds_s.h
@@ -17,26 +17,8 @@
 #define AUTH_REQUEST_PAIRWISE_ERROR			0		// _F flag setting
 #define AUTH_REQUEST_GROUP_ERROR			1		// _F flag setting
 
-// For variable setting
-#define CURRENT_BSS_TYPE				psBSS(psLOCAL->wConnectedSTAindex)->bBssType
-#define CURRENT_WEP_MODE				psSME->_dot11PrivacyInvoked
-#define CURRENT_BSSID					psBSS(psLOCAL->wConnectedSTAindex)->abBssID
-#define CURRENT_DESIRED_WPA_ENABLE		((psSME->bDesiredAuthMode==WPA_AUTH)||(psSME->bDesiredAuthMode==WPAPSK_AUTH))
-#ifdef _WPA2_
-#define CURRENT_DESIRED_WPA2_ENABLE		((psSME->bDesiredAuthMode==WPA2_AUTH)||(psSME->bDesiredAuthMode==WPA2PSK_AUTH))
-#endif //end def _WPA2_
-#define CURRENT_PAIRWISE_KEY_OK			psSME->pairwise_key_ok
-//[20040712 WS]
-#define CURRENT_GROUP_KEY_OK			psSME->group_key_ok
-#define CURRENT_PAIRWISE_KEY			psSME->tx_mic_key
-#define CURRENT_GROUP_KEY				psSME->group_tx_mic_key
-#define CURRENT_ENCRYPT_STATUS			psSME->encrypt_status
-#define CURRENT_WEP_ID					adapter->sSmePara._dot11WEPDefaultKeyID
-#define CURRENT_CONTROL_PORT_BLOCK		( psSME->wpa_ok!=1 || (adapter->Mds.boCounterMeasureBlock==1 && (CURRENT_ENCRYPT_STATUS==ENCRYPT_TKIP)) )
 #define CURRENT_FRAGMENT_THRESHOLD		(adapter->Mds.TxFragmentThreshold & ~0x1)
 #define CURRENT_PREAMBLE_MODE			psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG
-#define CURRENT_TX_RATE					adapter->sLocalPara.CurrentTxRate
-#define CURRENT_FALL_BACK_TX_RATE		adapter->sLocalPara.CurrentTxFallbackRate
 #define CURRENT_TX_RATE_FOR_MNG			adapter->sLocalPara.CurrentTxRateForMng
 #define CURRENT_PROTECT_MECHANISM		psLOCAL->boProtectMechanism
 #define CURRENT_RTS_THRESHOLD			adapter->Mds.TxRTSThreshold
diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h
index 248b710..56f2465 100644
--- a/drivers/staging/winbond/mto.h
+++ b/drivers/staging/winbond/mto.h
@@ -140,7 +140,6 @@ typedef struct _MTO_PARAMETERS
 #define MTO_TXPOWER_FROM_EEPROM		(adapter->sHwData.PowerIndexFromEEPROM)
 #define LOCAL_ANTENNA_NO()			(adapter->sLocalPara.bAntennaNo)
 #define LOCAL_IS_CONNECTED()		(adapter->sLocalPara.wConnectedSTAindex != 0)
-#define LOCAL_IS_IBSS_MODE()		(adapter->asBSSDescriptElement[adapter->sLocalPara.wConnectedSTAindex].bBssType == IBSS_NET)
 #define MTO_INITTXRATE_MODE			(adapter->sHwData.SoftwareSet&0x2)	//bit 1
 // 20040510 Turbo add
 #define MTO_TMR_CNT()               MTO_DATA().TmrCnt