diff options
author | Jeff Garzik <jgarzik@pobox.com> | 2005-10-30 23:01:51 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2005-10-31 01:37:18 (GMT) |
commit | d61780c0d384939ef31c46b47442854d5def4623 (patch) | |
tree | e655b4ea947c8d86cabbc3f58f406c18ae136b5f /drivers | |
parent | 34ad92c2388710cf24d27c896b8e6605c19a795c (diff) | |
download | linux-fsl-qoriq-d61780c0d384939ef31c46b47442854d5def4623.tar.xz |
[PATCH] remove some more check_region stuff
Removed some more references to check_region().
I checked these changes into the 'checkreg' branch of
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git
The only valid references remaining are in:
drivers/scsi/advansys.c
drivers/scsi/BusLogic.c
drivers/cdrom/sbpcd.c
sound/oss/pss.c
Remove last vestiges of ide_check_region()
drivers/char/specialix: trim trailing whitespace
drivers/char/specialix: eliminate use of check_region()
Remove outdated and unused references to check_region()
[sound oss] remove check_region() usage from cs4232, wavfront
[netdrvr eepro] trim trailing whitespace
[netdrvr eepro] remove check_region() usage
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/char/specialix.c | 342 | ||||
-rw-r--r-- | drivers/net/eepro.c | 50 |
2 files changed, 196 insertions, 196 deletions
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 50e0b61..352547e 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -38,19 +38,19 @@ * * Revision 1.0: April 1st 1997. * Initial release for alpha testing. - * Revision 1.1: April 14th 1997. - * Incorporated Richard Hudsons suggestions, + * Revision 1.1: April 14th 1997. + * Incorporated Richard Hudsons suggestions, * removed some debugging printk's. * Revision 1.2: April 15th 1997. * Ported to 2.1.x kernels. - * Revision 1.3: April 17th 1997 - * Backported to 2.0. (Compatibility macros). + * Revision 1.3: April 17th 1997 + * Backported to 2.0. (Compatibility macros). * Revision 1.4: April 18th 1997 - * Fixed DTR/RTS bug that caused the card to indicate - * "don't send data" to a modem after the password prompt. + * Fixed DTR/RTS bug that caused the card to indicate + * "don't send data" to a modem after the password prompt. * Fixed bug for premature (fake) interrupts. * Revision 1.5: April 19th 1997 - * fixed a minor typo in the header file, cleanup a little. + * fixed a minor typo in the header file, cleanup a little. * performance warnings are now MAXed at once per minute. * Revision 1.6: May 23 1997 * Changed the specialix=... format to include interrupt. @@ -60,10 +60,10 @@ * port to linux-2.1.43 kernel. * Revision 1.9: Oct 9 1998 * Added stuff for the IO8+/PCI version. - * Revision 1.10: Oct 22 1999 / Jan 21 2000. - * Added stuff for setserial. + * Revision 1.10: Oct 22 1999 / Jan 21 2000. + * Added stuff for setserial. * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) - * + * */ #define VERSION "1.11" @@ -154,7 +154,7 @@ static int sx_poll = HZ; -/* +/* * The following defines are mostly for testing purposes. But if you need * some nice reporting in your syslog, you can define them also. */ @@ -188,7 +188,7 @@ static DECLARE_MUTEX(tmp_buf_sem); static unsigned long baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 0, + 9600, 19200, 38400, 57600, 115200, 0, }; static struct specialix_board sx_board[SX_NBOARD] = { @@ -216,7 +216,7 @@ static inline int sx_paranoia_check(struct specialix_port const * port, KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n"; static const char *badinfo = KERN_ERR "sx: Warning: null specialix port for device %s in %s\n"; - + if (!port) { printk(badinfo, name, routine); return 1; @@ -231,9 +231,9 @@ static inline int sx_paranoia_check(struct specialix_port const * port, /* - * + * * Service functions for specialix IO8+ driver. - * + * */ /* Get board number from pointer */ @@ -246,7 +246,7 @@ static inline int board_No (struct specialix_board * bp) /* Get port number from pointer */ static inline int port_No (struct specialix_port const * port) { - return SX_PORT(port - sx_port); + return SX_PORT(port - sx_port); } @@ -309,7 +309,7 @@ static inline void sx_wait_CCR(struct specialix_board * bp) return; udelay (1); } - + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); } @@ -329,7 +329,7 @@ static inline void sx_wait_CCR_off(struct specialix_board * bp) return; udelay (1); } - + printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); } @@ -338,34 +338,28 @@ static inline void sx_wait_CCR_off(struct specialix_board * bp) * specialix IO8+ IO range functions. */ -static inline int sx_check_io_range(struct specialix_board * bp) +static inline int sx_request_io_range(struct specialix_board * bp) { - return check_region (bp->base, SX_IO_SPACE); -} - - -static inline void sx_request_io_range(struct specialix_board * bp) -{ - request_region(bp->base, - bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE, - "specialix IO8+" ); + return request_region(bp->base, + bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, + "specialix IO8+") == NULL; } static inline void sx_release_io_range(struct specialix_board * bp) { - release_region(bp->base, + release_region(bp->base, bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE); } - + /* Must be called with enabled interrupts */ -/* Ugly. Very ugly. Don't use this for anything else than initialization +/* Ugly. Very ugly. Don't use this for anything else than initialization code */ static inline void sx_long_delay(unsigned long delay) { unsigned long i; - + for (i = jiffies + delay; time_after(i, jiffies); ) ; } @@ -378,7 +372,7 @@ static int sx_set_irq ( struct specialix_board *bp) int i; unsigned long flags; - if (bp->flags & SX_BOARD_IS_PCI) + if (bp->flags & SX_BOARD_IS_PCI) return 1; switch (bp->irq) { /* In the same order as in the docs... */ @@ -420,7 +414,7 @@ static int sx_init_CD186x(struct specialix_board * bp) sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ /* Set RegAckEn */ sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN); - + /* Setting up prescaler. We need 4 ticks per 1 ms */ scaler = SX_OSCFREQ/SPECIALIX_TPS; @@ -448,7 +442,7 @@ static int read_cross_byte (struct specialix_board *bp, int reg, int bit) spin_lock_irqsave(&bp->lock, flags); for (i=0, t=0;i<8;i++) { sx_out_off (bp, CD186x_CAR, i); - if (sx_in_off (bp, reg) & bit) + if (sx_in_off (bp, reg) & bit) t |= 1 << i; } spin_unlock_irqrestore(&bp->lock, flags); @@ -472,7 +466,7 @@ void missed_irq (unsigned long data) spin_unlock_irqrestore(&bp->lock, flags); if (irq) { printk (KERN_INFO "Missed interrupt... Calling int from timer. \n"); - sx_interrupt (((struct specialix_board *)data)->irq, + sx_interrupt (((struct specialix_board *)data)->irq, (void*)data, NULL); } missed_irq_timer.expires = jiffies + sx_poll; @@ -495,7 +489,7 @@ static int sx_probe(struct specialix_board *bp) func_enter(); - if (sx_check_io_range(bp)) { + if (sx_request_io_range(bp)) { func_exit(); return 1; } @@ -509,15 +503,16 @@ static int sx_probe(struct specialix_board *bp) short_pause (); val2 = sx_in_off(bp, CD186x_PPRL); - + if ((val1 != 0x5a) || (val2 != 0xa5)) { printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n", board_No(bp), bp->base); + sx_release_io_range(bp); func_exit(); return 1; } - /* Check the DSR lines that Specialix uses as board + /* Check the DSR lines that Specialix uses as board identification */ val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR); val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS); @@ -532,6 +527,7 @@ static int sx_probe(struct specialix_board *bp) if (val1 != val2) { printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", board_No(bp), val2, bp->base, val1); + sx_release_io_range(bp); func_exit(); return 1; } @@ -546,7 +542,7 @@ static int sx_probe(struct specialix_board *bp) sx_wait_CCR(bp); sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */ sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */ - sx_long_delay(HZ/20); + sx_long_delay(HZ/20); irqs = probe_irq_off(irqs); dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR)); @@ -561,14 +557,15 @@ static int sx_probe(struct specialix_board *bp) } dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n", - val1, val2, val3); - + val1, val2, val3); + } - + #if 0 if (irqs <= 0) { printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n", board_No(bp), bp->base); + sx_release_io_range(bp); func_exit(); return 1; } @@ -579,19 +576,20 @@ static int sx_probe(struct specialix_board *bp) #endif /* Reset CD186x again */ if (!sx_init_CD186x(bp)) { + sx_release_io_range(bp); func_exit(); - return -EIO; + return 1; } sx_request_io_range(bp); bp->flags |= SX_BOARD_PRESENT; - + /* Chip revcode pkgtype GFRCR SRCR bit 7 CD180 rev B 0x81 0 CD180 rev C 0x82 0 CD1864 rev A 0x82 1 - CD1865 rev A 0x83 1 -- Do not use!!! Does not work. + CD1865 rev A 0x83 1 -- Do not use!!! Does not work. CD1865 rev B 0x84 1 -- Thanks to Gwen Wang, Cirrus Logic. */ @@ -623,8 +621,8 @@ static int sx_probe(struct specialix_board *bp) return 0; } -/* - * +/* + * * Interrupt processing routines. * */ @@ -657,7 +655,7 @@ static inline struct specialix_port * sx_get_port(struct specialix_board * bp, return port; } } - printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", + printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", board_No(bp), what, channel); return NULL; } @@ -681,7 +679,7 @@ static inline void sx_receive_exc(struct specialix_board * bp) tty = port->tty; dprintk (SX_DEBUG_RX, "port: %p count: %d BUFF_SIZE: %d\n", port, tty->flip.count, TTY_FLIPBUF_SIZE); - + status = sx_in(bp, CD186x_RCSR); dprintk (SX_DEBUG_RX, "status: 0x%x\n", status); @@ -707,30 +705,30 @@ static inline void sx_receive_exc(struct specialix_board * bp) return; } if (status & RCSR_TOUT) { - printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n", + printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n", board_No(bp), port_No(port)); func_exit(); return; - + } else if (status & RCSR_BREAK) { dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", board_No(bp), port_No(port)); *tty->flip.flag_buf_ptr++ = TTY_BREAK; if (port->flags & ASYNC_SAK) do_SAK(tty); - - } else if (status & RCSR_PE) + + } else if (status & RCSR_PE) *tty->flip.flag_buf_ptr++ = TTY_PARITY; - - else if (status & RCSR_FE) + + else if (status & RCSR_FE) *tty->flip.flag_buf_ptr++ = TTY_FRAME; - + else if (status & RCSR_OE) *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; - + else *tty->flip.flag_buf_ptr++ = 0; - + *tty->flip.char_buf_ptr++ = ch; tty->flip.count++; schedule_delayed_work(&tty->flip.work, 1); @@ -746,18 +744,18 @@ static inline void sx_receive(struct specialix_board * bp) unsigned char count; func_enter(); - + if (!(port = sx_get_port(bp, "Receive"))) { dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n"); func_exit(); return; } tty = port->tty; - + count = sx_in(bp, CD186x_RDCR); dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count); port->hits[count > 8 ? 9 : count]++; - + while (count--) { if (tty->flip.count >= TTY_FLIPBUF_SIZE) { printk(KERN_INFO "sx%d: port %d: Working around flip buffer overflow.\n", @@ -787,7 +785,7 @@ static inline void sx_transmit(struct specialix_board * bp) } dprintk (SX_DEBUG_TX, "port: %p\n", port); tty = port->tty; - + if (port->IER & IER_TXEMPTY) { /* FIFO drained */ sx_out(bp, CD186x_CAR, port_No(port)); @@ -796,7 +794,7 @@ static inline void sx_transmit(struct specialix_board * bp) func_exit(); return; } - + if ((port->xmit_cnt <= 0 && !port->break_length) || tty->stopped || tty->hw_stopped) { sx_out(bp, CD186x_CAR, port_No(port)); @@ -805,7 +803,7 @@ static inline void sx_transmit(struct specialix_board * bp) func_exit(); return; } - + if (port->break_length) { if (port->break_length > 0) { if (port->COR2 & COR2_ETC) { @@ -831,7 +829,7 @@ static inline void sx_transmit(struct specialix_board * bp) func_exit(); return; } - + count = CD186x_NFIFO; do { sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); @@ -839,7 +837,7 @@ static inline void sx_transmit(struct specialix_board * bp) if (--port->xmit_cnt <= 0) break; } while (--count > 0); - + if (port->xmit_cnt <= 0) { sx_out(bp, CD186x_CAR, port_No(port)); port->IER &= ~IER_TXRDY; @@ -862,9 +860,9 @@ static inline void sx_check_modem(struct specialix_board * bp) dprintk (SX_DEBUG_SIGNALS, "Modem intr. "); if (!(port = sx_get_port(bp, "Modem"))) return; - + tty = port->tty; - + mcr = sx_in(bp, CD186x_MCR); printk ("mcr = %02x.\n", mcr); @@ -879,7 +877,7 @@ static inline void sx_check_modem(struct specialix_board * bp) schedule_work(&port->tqueue_hangup); } } - + #ifdef SPECIALIX_BRAIN_DAMAGED_CTS if (mcr & MCR_CTSCHG) { if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { @@ -906,7 +904,7 @@ static inline void sx_check_modem(struct specialix_board * bp) sx_out(bp, CD186x_IER, port->IER); } #endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ - + /* Clear change bits */ sx_out(bp, CD186x_MCR, 0); } @@ -940,7 +938,7 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs) while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) & (SRSR_RREQint | SRSR_TREQint | - SRSR_MREQint)))) { + SRSR_MREQint)))) { if (status & SRSR_RREQint) { ack = sx_in(bp, CD186x_RRAR); @@ -951,7 +949,7 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs) else printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", board_No(bp), status, ack); - + } else if (status & SRSR_TREQint) { ack = sx_in(bp, CD186x_TRAR); @@ -963,13 +961,13 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs) } else if (status & SRSR_MREQint) { ack = sx_in(bp, CD186x_MRAR); - if (ack == (SX_ID | GIVR_IT_MODEM)) + if (ack == (SX_ID | GIVR_IT_MODEM)) sx_check_modem(bp); else printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", board_No(bp), status, ack); - - } + + } sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ } @@ -1026,7 +1024,7 @@ static inline int sx_setup_board(struct specialix_board * bp) { int error; - if (bp->flags & SX_BOARD_ACTIVE) + if (bp->flags & SX_BOARD_ACTIVE) return 0; if (bp->flags & SX_BOARD_IS_PCI) @@ -1034,7 +1032,7 @@ static inline int sx_setup_board(struct specialix_board * bp) else error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp); - if (error) + if (error) return error; turn_ints_on (bp); @@ -1055,7 +1053,7 @@ static inline void sx_shutdown_board(struct specialix_board *bp) } bp->flags &= ~SX_BOARD_ACTIVE; - + dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", bp->irq, board_No (bp)); free_irq(bp->irq, bp); @@ -1068,7 +1066,7 @@ static inline void sx_shutdown_board(struct specialix_board *bp) /* - * Setting up port characteristics. + * Setting up port characteristics. * Must be called with disabled interrupts */ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port) @@ -1103,10 +1101,10 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p spin_unlock_irqrestore(&bp->lock, flags); dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); baud = C_BAUD(tty); - + if (baud & CBAUDEX) { baud &= ~CBAUDEX; - if (baud < 1 || baud > 2) + if (baud < 1 || baud > 2) port->tty->termios->c_cflag &= ~CBAUDEX; else baud += 15; @@ -1117,8 +1115,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) baud += 2; } - - + + if (!baud_table[baud]) { /* Drop DTR & exit */ dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); @@ -1127,7 +1125,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_MSVR, port->MSVR ); spin_unlock_irqrestore(&bp->lock, flags); - } + } else dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); return; @@ -1137,9 +1135,9 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p port ->MSVR |= MSVR_DTR; } } - + /* - * Now we must calculate some speed depended things + * Now we must calculate some speed depended things */ /* Set baud rate for port */ @@ -1152,7 +1150,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p tmp = (((SX_OSCFREQ + baud_table[baud]/2) / baud_table[baud] + CD186x_TPC/2) / CD186x_TPC); - if ((tmp < 0x10) && time_before(again, jiffies)) { + if ((tmp < 0x10) && time_before(again, jiffies)) { again = jiffies + HZ * 60; /* Page 48 of version 2.0 of the CL-CD1865 databook */ if (tmp >= 12) { @@ -1164,27 +1162,27 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n" "Warning: overstressing Cirrus chip. " "This might not work.\n" - "Read specialix.txt for more info.\n", + "Read specialix.txt for more info.\n", port_No (port), tmp); } } spin_lock_irqsave(&bp->lock, flags); - sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); - sx_out(bp, CD186x_RBPRL, tmp & 0xff); + sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); + sx_out(bp, CD186x_RBPRL, tmp & 0xff); sx_out(bp, CD186x_TBPRL, tmp & 0xff); spin_unlock_irqrestore(&bp->lock, flags); if (port->custom_divisor) { baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor; baud = ( baud + 5 ) / 10; - } else + } else baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */ /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; + tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? SERIAL_XMIT_SIZE - 1 : tmp); - + /* Receiver timeout will be transmission time for 1.5 chars */ tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; tmp = (tmp > 0xff) ? 0xff : tmp; @@ -1205,29 +1203,29 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p cor1 |= COR1_8BITS; break; } - - if (C_CSTOPB(tty)) + + if (C_CSTOPB(tty)) cor1 |= COR1_2SB; - + cor1 |= COR1_IGNORE; if (C_PARENB(tty)) { cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) + if (C_PARODD(tty)) cor1 |= COR1_ODDP; - if (I_INPCK(tty)) + if (I_INPCK(tty)) cor1 &= ~COR1_IGNORE; } /* Set marking of some errors */ port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) + if (I_INPCK(tty)) port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) + if (I_IGNPAR(tty)) port->mark_mask &= ~(RCSR_FE | RCSR_PE); if (I_IGNBRK(tty)) { port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) + if (I_IGNPAR(tty)) /* Real raw mode. Ignore all */ port->mark_mask &= ~RCSR_OE; } @@ -1241,7 +1239,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR)); spin_unlock_irqrestore(&bp->lock, flags); #else - port->COR2 |= COR2_CTSAE; + port->COR2 |= COR2_CTSAE; #endif } /* Enable Software Flow Control. FIXME: I'm not sure about this */ @@ -1264,11 +1262,11 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p mcor1 |= MCOR1_CDZD; mcor2 |= MCOR2_CDOD; } - - if (C_CREAD(tty)) + + if (C_CREAD(tty)) /* Enable receiver */ port->IER |= IER_RXD; - + /* Set input FIFO size (1-8 bytes) */ cor3 |= sx_rxfifo; /* Setting up CD186x channel registers */ @@ -1311,11 +1309,11 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port func_exit(); return 0; } - + if (!port->xmit_buf) { /* We may sleep in get_zeroed_page() */ unsigned long tmp; - + if (!(tmp = get_zeroed_page(GFP_KERNEL))) { func_exit(); return -ENOMEM; @@ -1328,10 +1326,10 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port } port->xmit_buf = (unsigned char *) tmp; } - + spin_lock_irqsave(&port->lock, flags); - if (port->tty) + if (port->tty) clear_bit(TTY_IO_ERROR, &port->tty->flags); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; @@ -1340,7 +1338,7 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port spin_unlock_irqrestore(&port->lock, flags); - + func_exit(); return 0; } @@ -1352,14 +1350,14 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port * struct tty_struct *tty; int i; unsigned long flags; - + func_enter(); if (!(port->flags & ASYNC_INITIALIZED)) { func_exit(); return; } - + if (sx_debug & SX_DEBUG_FIFO) { dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ", board_No(bp), port_No(port), port->overrun); @@ -1394,13 +1392,13 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port * if (tty) set_bit(TTY_IO_ERROR, &tty->flags); port->flags &= ~ASYNC_INITIALIZED; - - if (!bp->count) + + if (!bp->count) sx_shutdown_board(bp); func_exit(); } - + static int block_til_ready(struct tty_struct *tty, struct file * filp, struct specialix_port *port) { @@ -1427,7 +1425,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, return -ERESTARTSYS; } } - + /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. @@ -1477,7 +1475,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else - retval = -ERESTARTSYS; + retval = -ERESTARTSYS; break; } if (!(port->flags & ASYNC_CLOSING) && @@ -1506,7 +1504,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, port->flags |= ASYNC_NORMAL_ACTIVE; func_exit(); return 0; -} +} static int sx_open(struct tty_struct * tty, struct file * filp) @@ -1526,7 +1524,7 @@ static int sx_open(struct tty_struct * tty, struct file * filp) func_exit(); return -ENODEV; } - + bp = &sx_board[board]; port = sx_port + board * SX_NPORT + SX_PORT(tty->index); port->overrun = 0; @@ -1557,7 +1555,7 @@ static int sx_open(struct tty_struct * tty, struct file * filp) func_enter(); return error; } - + if ((error = block_til_ready(tty, filp, port))) { func_enter(); return error; @@ -1574,7 +1572,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp) struct specialix_board *bp; unsigned long flags; unsigned long timeout; - + func_enter(); if (!port || sx_paranoia_check(port, tty->name, "close")) { func_exit(); @@ -1587,7 +1585,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp) func_exit(); return; } - + bp = port_Board(port); if ((tty->count == 1) && (port->count != 1)) { printk(KERN_ERR "sx%d: sx_close: bad port count;" @@ -1607,7 +1605,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp) } port->flags |= ASYNC_CLOSING; /* - * Now we wait for the transmit buffer to clear; and we notify + * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; @@ -1681,7 +1679,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp) } -static int sx_write(struct tty_struct * tty, +static int sx_write(struct tty_struct * tty, const unsigned char *buf, int count) { struct specialix_port *port = (struct specialix_port *)tty->driver_data; @@ -1694,7 +1692,7 @@ static int sx_write(struct tty_struct * tty, func_exit(); return 0; } - + bp = port_Board(port); if (!tty || !port->xmit_buf || !tmp_buf) { @@ -1824,7 +1822,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty) struct specialix_port *port = (struct specialix_port *)tty->driver_data; func_enter(); - + if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { func_exit(); return 0; @@ -1881,13 +1879,13 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) port_No(port), status, sx_in (bp, CD186x_CAR)); dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); if (SX_CRTSCTS(port->tty)) { - result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */ + result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */ | ((status & MSVR_DTR) ? TIOCM_RTS : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ | ((status & MSVR_CTS) ? TIOCM_CTS : 0); } else { - result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */ + result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */ | ((status & MSVR_DTR) ? TIOCM_DTR : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ @@ -1955,7 +1953,7 @@ static inline void sx_send_break(struct specialix_port * port, unsigned long len { struct specialix_board *bp = port_Board(port); unsigned long flags; - + func_enter(); spin_lock_irqsave (&port->lock, flags); @@ -1996,8 +1994,8 @@ static inline int sx_set_serial_info(struct specialix_port * port, func_enter(); return -EFAULT; } - -#if 0 + +#if 0 if ((tmp.irq != bp->irq) || (tmp.port != bp->base) || (tmp.type != PORT_CIRRUS) || @@ -2008,12 +2006,12 @@ static inline int sx_set_serial_info(struct specialix_port * port, func_exit(); return -EINVAL; } -#endif +#endif change_speed = ((port->flags & ASYNC_SPD_MASK) != (tmp.flags & ASYNC_SPD_MASK)); change_speed |= (tmp.custom_divisor != port->custom_divisor); - + if (!capable(CAP_SYS_ADMIN)) { if ((tmp.close_delay != port->close_delay) || (tmp.closing_wait != port->closing_wait) || @@ -2045,7 +2043,7 @@ static inline int sx_get_serial_info(struct specialix_port * port, { struct serial_struct tmp; struct specialix_board *bp = port_Board(port); - + func_enter(); /* @@ -2074,7 +2072,7 @@ static inline int sx_get_serial_info(struct specialix_port * port, } -static int sx_ioctl(struct tty_struct * tty, struct file * filp, +static int sx_ioctl(struct tty_struct * tty, struct file * filp, unsigned int cmd, unsigned long arg) { struct specialix_port *port = (struct specialix_port *)tty->driver_data; @@ -2087,7 +2085,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp, func_exit(); return -ENODEV; } - + switch (cmd) { case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); @@ -2129,7 +2127,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp, case TIOCGSERIAL: func_exit(); return sx_get_serial_info(port, argp); - case TIOCSSERIAL: + case TIOCSSERIAL: func_exit(); return sx_set_serial_info(port, argp); default: @@ -2153,16 +2151,16 @@ static void sx_throttle(struct tty_struct * tty) func_exit(); return; } - + bp = port_Board(port); - + /* Use DTR instead of RTS ! */ - if (SX_CRTSCTS (tty)) + if (SX_CRTSCTS (tty)) port->MSVR &= ~MSVR_DTR; else { /* Auch!!! I think the system shouldn't call this then. */ /* Or maybe we're supposed (allowed?) to do our side of hw - handshake anyway, even when hardware handshake is off. + handshake anyway, even when hardware handshake is off. When you see this in your logs, please report.... */ printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n", port_No (port)); @@ -2193,14 +2191,14 @@ static void sx_unthrottle(struct tty_struct * tty) unsigned long flags; func_enter(); - + if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { func_exit(); return; } - + bp = port_Board(port); - + spin_lock_irqsave(&port->lock, flags); /* XXXX Use DTR INSTEAD???? */ if (SX_CRTSCTS(tty)) { @@ -2234,14 +2232,14 @@ static void sx_stop(struct tty_struct * tty) unsigned long flags; func_enter(); - + if (sx_paranoia_check(port, tty->name, "sx_stop")) { func_exit(); return; } bp = port_Board(port); - + spin_lock_irqsave(&port->lock, flags); port->IER &= ~IER_TXRDY; spin_lock_irqsave(&bp->lock, flags); @@ -2261,14 +2259,14 @@ static void sx_start(struct tty_struct * tty) unsigned long flags; func_enter(); - + if (sx_paranoia_check(port, tty->name, "sx_start")) { func_exit(); return; } - + bp = port_Board(port); - + spin_lock_irqsave(&port->lock, flags); if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { port->IER |= IER_TXRDY; @@ -2290,13 +2288,13 @@ static void sx_start(struct tty_struct * tty) * * serial interrupt routine -> (workqueue) -> * do_sx_hangup() -> tty->hangup() -> sx_hangup() - * + * */ static void do_sx_hangup(void *private_) { struct specialix_port *port = (struct specialix_port *) private_; struct tty_struct *tty; - + func_enter(); tty = port->tty; @@ -2319,9 +2317,9 @@ static void sx_hangup(struct tty_struct * tty) func_exit(); return; } - + bp = port_Board(port); - + sx_shutdown_port(bp, port); spin_lock_irqsave(&port->lock, flags); port->event = 0; @@ -2346,10 +2344,10 @@ static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios struct specialix_port *port = (struct specialix_port *)tty->driver_data; unsigned long flags; struct specialix_board * bp; - + if (sx_paranoia_check(port, tty->name, "sx_set_termios")) return; - + if (tty->termios->c_cflag == old_termios->c_cflag && tty->termios->c_iflag == old_termios->c_iflag) return; @@ -2420,7 +2418,7 @@ static int sx_init_drivers(void) func_exit(); return 1; } - + if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) { printk(KERN_ERR "sx: Couldn't get free page.\n"); put_tty_driver(specialix_driver); @@ -2457,7 +2455,7 @@ static int sx_init_drivers(void) init_waitqueue_head(&sx_port[i].close_wait); spin_lock_init(&sx_port[i].lock); } - + func_exit(); return 0; } @@ -2472,8 +2470,8 @@ static void sx_release_drivers(void) func_exit(); } -/* - * This routine must be called by kernel at boot time +/* + * This routine must be called by kernel at boot time */ static int __init specialix_init(void) { @@ -2489,7 +2487,7 @@ static int __init specialix_init(void) #else printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); #endif - + for (i = 0; i < SX_NBOARD; i++) sx_board[i].lock = SPIN_LOCK_UNLOCKED; @@ -2498,7 +2496,7 @@ static int __init specialix_init(void) return -EIO; } - for (i = 0; i < SX_NBOARD; i++) + for (i = 0; i < SX_NBOARD; i++) if (sx_board[i].base && !sx_probe(&sx_board[i])) found++; @@ -2512,8 +2510,8 @@ static int __init specialix_init(void) i++; continue; } - pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, - PCI_DEVICE_ID_SPECIALIX_IO8, + pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, + PCI_DEVICE_ID_SPECIALIX_IO8, pdev); if (!pdev) break; @@ -2557,10 +2555,10 @@ module_param(sx_poll, int, 0); /* * You can setup up to 4 boards. * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. - * You should specify the IRQs too in that case "irq=....,...". - * + * You should specify the IRQs too in that case "irq=....,...". + * * More than 4 boards in one computer is not possible, as the card can - * only use 4 different interrupts. + * only use 4 different interrupts. * */ static int __init specialix_init_module(void) @@ -2583,16 +2581,16 @@ static int __init specialix_init_module(void) return specialix_init(); } - + static void __exit specialix_exit_module(void) { int i; - + func_enter(); sx_release_drivers(); for (i = 0; i < SX_NBOARD; i++) - if (sx_board[i].flags & SX_BOARD_PRESENT) + if (sx_board[i].flags & SX_BOARD_PRESENT) sx_release_io_range(&sx_board[i]); #ifdef SPECIALIX_TIMER del_timer (&missed_irq_timer); diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 1ce2c67..a806dfe 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -552,8 +552,7 @@ static int __init do_eepro_probe(struct net_device *dev) { unsigned short int WS[32]=WakeupSeq; - if (check_region(WakeupPort, 2)==0) { - + if (request_region(WakeupPort, 2, "eepro wakeup")) { if (net_debug>5) printk(KERN_DEBUG "Waking UP\n"); @@ -563,7 +562,10 @@ static int __init do_eepro_probe(struct net_device *dev) outb_p(WS[i],WakeupPort); if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]); } - } else printk(KERN_WARNING "Checkregion Failed!\n"); + + release_region(WakeupPort, 2); + } else + printk(KERN_WARNING "PnP wakeup region busy!\n"); } #endif @@ -705,7 +707,7 @@ static void __init eepro_print_info (struct net_device *dev) dev->name, (unsigned)dev->base_addr); break; case LAN595FX: - printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,", + printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,", dev->name, (unsigned)dev->base_addr); break; case LAN595TX: @@ -713,7 +715,7 @@ static void __init eepro_print_info (struct net_device *dev) dev->name, (unsigned)dev->base_addr); break; case LAN595: - printk("%s: Intel 82595-based lan card at %#x,", + printk("%s: Intel 82595-based lan card at %#x,", dev->name, (unsigned)dev->base_addr); } @@ -726,7 +728,7 @@ static void __init eepro_print_info (struct net_device *dev) if (dev->irq > 2) printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]); - else + else printk(", %s.\n", ifmap[dev->if_port]); if (net_debug > 3) { @@ -756,7 +758,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe) int err; /* Grab the region so we can find another board if autoIRQ fails. */ - if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) { + if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) { if (!autoprobe) printk(KERN_WARNING "EEPRO: io-port 0x%04x in use \n", ioaddr); @@ -838,15 +840,15 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe) /* Mask off INT number */ int count = lp->word[1] & 7; unsigned irqMask = lp->word[7]; - + while (count--) irqMask &= irqMask - 1; - + count = ffs(irqMask); - + if (count) dev->irq = count - 1; - + if (dev->irq < 2) { printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n"); goto exit; @@ -854,7 +856,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe) dev->irq = 9; } } - + dev->open = eepro_open; dev->stop = eepro_close; dev->hard_start_xmit = eepro_send_packet; @@ -863,7 +865,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe) dev->tx_timeout = eepro_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; dev->ethtool_ops = &eepro_ethtool_ops; - + /* print boot time info */ eepro_print_info(dev); @@ -1047,8 +1049,8 @@ static int eepro_open(struct net_device *dev) /* Initialize the RCV and XMT upper and lower limits */ - outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG); - outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG); + outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG); + outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG); outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg); outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg); @@ -1065,12 +1067,12 @@ static int eepro_open(struct net_device *dev) eepro_clear_int(ioaddr); /* Initialize RCV */ - outw(lp->rcv_lower_limit, ioaddr + RCV_BAR); + outw(lp->rcv_lower_limit, ioaddr + RCV_BAR); lp->rx_start = lp->rcv_lower_limit; - outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP); + outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP); /* Initialize XMT */ - outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar); + outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar); lp->tx_start = lp->tx_end = lp->xmt_lower_limit; lp->tx_last = 0; @@ -1411,7 +1413,7 @@ set_multicast_list(struct net_device *dev) outb(0x08, ioaddr + STATUS_REG); if (i & 0x20) { /* command ABORTed */ - printk(KERN_NOTICE "%s: multicast setup failed.\n", + printk(KERN_NOTICE "%s: multicast setup failed.\n", dev->name); break; } else if ((i & 0x0f) == 0x03) { /* MC-Done */ @@ -1512,7 +1514,7 @@ hardware_send_packet(struct net_device *dev, void *buf, short length) end = last + (((length + 3) >> 1) << 1) + XMT_HEADER; if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */ - if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) { + if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) { /* Arrrr!!!, must keep the xmt header together, several days were lost to chase this one down. */ last = lp->xmt_lower_limit; @@ -1643,7 +1645,7 @@ eepro_rx(struct net_device *dev) else if (rcv_status & 0x0800) lp->stats.rx_crc_errors++; - printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n", + printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n", dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size); } @@ -1674,10 +1676,10 @@ eepro_transmit_interrupt(struct net_device *dev) { struct eepro_local *lp = netdev_priv(dev); short ioaddr = dev->base_addr; - short boguscount = 25; + short boguscount = 25; short xmt_status; - while ((lp->tx_start != lp->tx_end) && boguscount--) { + while ((lp->tx_start != lp->tx_end) && boguscount--) { outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG); xmt_status = inw(ioaddr+IO_PORT); @@ -1723,7 +1725,7 @@ static int eepro_ethtool_get_settings(struct net_device *dev, { struct eepro_local *lp = (struct eepro_local *)dev->priv; - cmd->supported = SUPPORTED_10baseT_Half | + cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_Autoneg; cmd->advertising = ADVERTISED_10baseT_Half | |