treewide: Replace incomming with incoming in all comments and strings

Signed-off-by: Jorrit Schippers <jorrit@ncode.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

11 files changed, 15 insertions, 15 deletions

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 1630150..eb325ba 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -311,7 +311,7 @@ config HID_LOGITECH_DJ
 	Say Y if you want support for Logitech Unifying receivers and devices.
 	Unifying receivers are capable of pairing up to 6 Logitech compliant
 	devices to the same receiver. Without this driver it will be handled by
-	generic USB_HID driver and all incomming events will be multiplexed
+	generic USB_HID driver and all incoming events will be multiplexed
 	into a single mouse and a single keyboard device.
 
 config LOGITECH_FF
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 3942efb..a315a29 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER {
 #define LAPD            6       /* lapd (Q.921)                     */
 #define X25_L2          7       /* x.25 layer-2                     */
 #define V120_L2         8       /* V.120 layer-2 protocol           */
-#define V42_IN          9       /* V.42 layer-2 protocol, incomming */
+#define V42_IN          9       /* V.42 layer-2 protocol, incoming */
 #define V42            10       /* V.42 layer-2 protocol            */
 #define MDM_ATP        11       /* AT Parser built in the L2        */
 #define X75_V42BIS     12       /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */
-#define RTPL2_IN       13       /* RTP layer-2 protocol, incomming  */
+#define RTPL2_IN       13       /* RTP layer-2 protocol, incoming  */
 #define RTPL2          14       /* RTP layer-2 protocol             */
 #define V120_V42BIS    15       /* V.120 layer-2 protocol supporting V.42 bis compression */
 
@@ -1125,7 +1125,7 @@ extern word li_total_channels;
   | Direction           | word | Enable compression/decompression for    |
   |                     |      | 0: All direction                        |
   |                     |      | 1: disable outgoing data                |
-  |                     |      | 2: disable incomming data               |
+  |                     |      | 2: disable incoming data               |
   |                     |      | 3: disable both direction (default)     |
   +---------------------+------+-----------------------------------------+
   | Number of code      | word | Parameter P1 of V.42bis in accordance   |
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 889dc98..329c0c2 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -419,11 +419,11 @@ struct dual
 #define LAPD            6       /* lapd (Q.921)                     */
 #define X25_L2          7       /* x.25 layer-2                     */
 #define V120_L2         8       /* V.120 layer-2 protocol           */
-#define V42_IN          9       /* V.42 layer-2 protocol, incomming */
+#define V42_IN          9       /* V.42 layer-2 protocol, incoming */
 #define V42            10       /* V.42 layer-2 protocol            */
 #define MDM_ATP        11       /* AT Parser built in the L2        */
 #define X75_V42BIS     12       /* x.75 with V.42bis                */
-#define RTPL2_IN       13       /* RTP layer-2 protocol, incomming  */
+#define RTPL2_IN       13       /* RTP layer-2 protocol, incoming  */
 #define RTPL2          14       /* RTP layer-2 protocol             */
 #define V120_V42BIS    15       /* V.120 asynchronous mode supporting V.42bis compression */
 #define LISTENER       27       /* Layer 2 to listen line */
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index db50f78..d67126d 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -692,7 +692,7 @@ l1oip_socket_thread(void *data)
 	hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
 	hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
 
-	/* bind to incomming port */
+	/* bind to incoming port */
 	if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
 			      sizeof(hc->sin_local))) {
 		printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 9fd9d1c..4544a07 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -312,7 +312,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
 	/*
 	 * This is a generic configuration which is valid for most
 	 * prp input-output format combinations.
-	 * We set the incomming and outgoing pixelformat to a
+	 * We set the incoming and outgoing pixelformat to a
 	 * 16 Bit wide format and adjust the bytesperline
 	 * accordingly. With this configuration the inputdata
 	 * will not be changed by the emma and could be any type
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc..2bf4c08 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8498,7 +8498,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
 		       (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
 		       (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
 	} else {
-		/* Prevent incomming interrupts in IGU */
+		/* Prevent incoming interrupts in IGU */
 		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
 
 		REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index a52922e..d09b0d9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -64,7 +64,7 @@ static const char mlx4_en_version[] =
 
 /* Enable RSS UDP traffic */
 MLX4_EN_PARM_INT(udp_rss, 1,
-		 "Enable RSS for incomming UDP traffic or disabled (0)");
+		 "Enable RSS for incoming UDP traffic or disabled (0)");
 
 /* Priority pausing */
 MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 8487204..9cea451 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 		/* Enable Interuupt */
 		self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM					
 				
-		/* Be ready for incomming frames */
+		/* Be ready for incoming frames */
 		ali_ircc_dma_receive(self);	// benajmin 2000/11/8 07:46PM not complete
 	}	
 	/* Go to SIR Speed */
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 2f7d195..629372f 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -224,7 +224,7 @@ enum BinderDriverReturnProtocol {
 	BR_SPAWN_LOOPER = _IO('r', 13),
 	/*
 	 * No parameters.  The driver has determined that a process has no
-	 * threads waiting to service incomming transactions.  When a process
+	 * threads waiting to service incoming transactions.  When a process
 	 * receives this command, it must spawn a new service thread and
 	 * register it via bcENTER_LOOPER.
 	 */
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 683bedc..b595b9d 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -72,7 +72,7 @@ int pow_receive_group = 15;
 module_param(pow_receive_group, int, 0444);
 MODULE_PARM_DESC(pow_receive_group, "\n"
 	"\tPOW group to receive packets from. All ethernet hardware\n"
-	"\twill be configured to send incomming packets to this POW\n"
+	"\twill be configured to send incoming packets to this POW\n"
 	"\tgroup. Also any other software can submit packets to this\n"
 	"\tgroup for the kernel to process.");
 
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b4ba067..97a511f 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
 		(*assem) = pool_allocate(hw, *assem, length);
 		if (!(*assem)) {
 			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
-				": no memory for incomming data packet, dropped!\n");
+				": no memory for incoming data packet, dropped!\n");
 			return;
 		}
 		(*assem)->protocol = protocol;
@@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
 		packet = pool_allocate(hw, NULL, length);
 		if (!packet) {
 			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
-				": no memory for incomming ctrl packet, dropped!\n");
+				": no memory for incoming ctrl packet, dropped!\n");
 			return;
 		}
 		packet->protocol = protocol;