diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-02-04 15:58:52 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-02-04 15:58:52 (GMT) |
commit | f5bb3a5e9dcdb8435471562b6cada89525cf4df1 (patch) | |
tree | 7b7cf9b90bacd0e2fe07cb3387516e9243f1ab66 /drivers | |
parent | 9853832c49dc1685587abeb4e1decd4be690d256 (diff) | |
parent | 1560a79a2c2ea0c3826150da8029991d685de990 (diff) | |
download | linux-fsl-qoriq-f5bb3a5e9dcdb8435471562b6cada89525cf4df1.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits)
Jesper Juhl is the new trivial patches maintainer
Documentation: mention email-clients.txt in SubmittingPatches
fs/binfmt_elf.c: spello fix
do_invalidatepage() comment typo fix
Documentation/filesystems/porting fixes
typo fixes in net/core/net_namespace.c
typo fix in net/rfkill/rfkill.c
typo fixes in net/sctp/sm_statefuns.c
lib/: Spelling fixes
kernel/: Spelling fixes
include/scsi/: Spelling fixes
include/linux/: Spelling fixes
include/asm-m68knommu/: Spelling fixes
include/asm-frv/: Spelling fixes
fs/: Spelling fixes
drivers/watchdog/: Spelling fixes
drivers/video/: Spelling fixes
drivers/ssb/: Spelling fixes
drivers/serial/: Spelling fixes
drivers/scsi/: Spelling fixes
...
Diffstat (limited to 'drivers')
116 files changed, 166 insertions, 171 deletions
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index cbfe9ae..d9d531c 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -830,7 +830,7 @@ static int acpi_bus_get_flags(struct acpi_device *device) if (ACPI_SUCCESS(status)) device->flags.wake_capable = 1; - /* TBD: Peformance management */ + /* TBD: Performance management */ return 0; } diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c index cbbd331..b630ee1 100644 --- a/drivers/acpi/utilities/utresrc.c +++ b/drivers/acpi/utilities/utresrc.c @@ -1,6 +1,6 @@ /******************************************************************************* * - * Module Name: utresrc - Resource managment utilities + * Module Name: utresrc - Resource management utilities * ******************************************************************************/ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 47892e6..4b99ed0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -837,7 +837,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) if (is_slave) { /* clear TIME1|IE1|PPE1|DTE1 */ master_data &= 0xff0f; - /* Enable SITRE (seperate slave timing register) */ + /* Enable SITRE (separate slave timing register) */ master_data |= 0x4000; /* enable PPE1, IE1 and TIME1 as needed */ master_data |= (control << 4); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index bdbd55a..361cf50 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3097,7 +3097,7 @@ static int ata_dev_set_mode(struct ata_device *dev) /** * ata_do_set_mode - Program timings and issue SET FEATURES - XFER * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device + * @r_failed_dev: out parameter for failed device * * Standard implementation of the function used to tune and set * ATA device disk transfer mode (PIO3, UDMA6, etc.). If diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c index 67e574d..db057b1 100644 --- a/drivers/ata/pata_at32.c +++ b/drivers/ata/pata_at32.c @@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev) if (irq < 0) return irq; - /* Setup struct containing private infomation */ + /* Setup struct containing private information */ info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL); if (!info) return -ENOMEM; diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 043dcd3..dc33220 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) idetm_data &= 0xCC0F; idetm_data |= (control << 4); - /* Slave timing in seperate register */ + /* Slave timing in separate register */ pci_read_config_byte(dev, 0x44, &slave_data); slave_data &= 0x0F << shift; slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift; diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 1eda821..e0c2cc2 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) idetm_data &= 0xCC0F; idetm_data |= (control << 4); - /* Slave timing in seperate register */ + /* Slave timing in separate register */ pci_read_config_byte(dev, 0x44, &slave_data); slave_data &= 0xF0; slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 87546d9..dc7e915 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and - the higer bits are dependant on the device */ + the higher bits are dependant on the device */ timing &= ~0x870F; timing |= mwdma_bits[speed]; } else { @@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and - the higer bits are dependant on the device, bit 15 udma */ + the higher bits are dependant on the device, bit 15 udma */ timing &= ~0x870F; timing |= mwdma_bits[speed]; } else { diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 63ee6c0..55178e9 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1453,7 +1453,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], TYPE_MSG); - /* sendcmd turned off interrputs on the board, turn 'em back on. */ + /* sendcmd turned off interrupts on the board, turn 'em back on. */ (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); if (rc == 0) return SUCCESS; @@ -1483,7 +1483,7 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) 0, 2, 0, 0, (unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], TYPE_MSG); - /* sendcmd turned off interrputs on the board, turn 'em back on. */ + /* sendcmd turned off interrupts on the board, turn 'em back on. */ (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); if (rc == 0) return SUCCESS; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 08f48d5..dade162 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -383,7 +383,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed) outb(lcr, iobase + UART_LCR); /* Set 8N1 */ outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ - /* Turn on interrups */ + /* Turn on interrupts */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); spin_unlock_irqrestore(&(info->lock), flags); diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index 3ae57ec..fa194a4 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -584,7 +584,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_RE_FOG_START 0x4298 /* Not sure why there are duplicate of factor and constant values. - * My best guess so far is that there are seperate zbiases for test and write. + * My best guess so far is that there are separate zbiases for test and write. * Ordering might be wrong. * Some of the tests indicate that fgl has a fallback implementation of zbias * via pixel shaders. diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c index 75d6b74..7009dbd 100644 --- a/drivers/char/drm/via_dma.c +++ b/drivers/char/drm/via_dma.c @@ -400,7 +400,7 @@ static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv, } /* - * This function is used internally by ring buffer mangement code. + * This function is used internally by ring buffer management code. * * Returns virtual pointer to ring buffer. */ diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 004141d..49233f5 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -18,7 +18,7 @@ * * NOTES: * - Locking is required for safe execution of EFI calls with regards - * to interrrupts and SMP. + * to interrupts and SMP. * * TODO (December 1999): * - provide the API to set/get the WakeUp Alarm (different from the diff --git a/drivers/char/epca.c b/drivers/char/epca.c index ffcecde..ffd747c 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1797,7 +1797,7 @@ static unsigned termios2digi_c(struct channel *ch, unsigned cflag) res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE); /* * This gets a little confusing. The Digi cards have their own - * representation of c_cflags controling baud rate. For the most part + * representation of c_cflags controlling baud rate. For the most part * this is identical to the Linux implementation. However; Digi * supports one rate (76800) that Linux doesn't. This means that the * c_cflag entry that would normally mean 76800 for Digi actually means @@ -2068,7 +2068,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file, { /* * This call is made by the apps to complete the - * initilization of the board(s). This routine is + * initialization of the board(s). This routine is * responsible for setting the card to its initial * state and setting the drivers control fields to the * sutianle settings for the card in question. diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c index 0e8ceea..712d9f2 100644 --- a/drivers/char/hangcheck-timer.c +++ b/drivers/char/hangcheck-timer.c @@ -26,7 +26,7 @@ * The hangcheck-timer driver uses the TSC to catch delays that * jiffies does not notice. A timer is set. When the timer fires, it * checks whether it was delayed and if that delay exceeds a given - * margin of error. The hangcheck_tick module paramter takes the timer + * margin of error. The hangcheck_tick module parameter takes the timer * duration in seconds. The hangcheck_margin parameter defines the * margin of error, in seconds. The defaults are 60 seconds for the * timer and 180 seconds for the margin of error. IOW, a timer is set diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index fd75590..3402def 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -838,7 +838,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev) if (!hvcsd) return -ENODEV; - /* By this time the vty-server won't be getting any more interrups */ + /* By this time the vty-server won't be getting any more interrupts */ spin_lock_irqsave(&hvcsd->lock, flags); diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c index e46120d..d6567b3 100644 --- a/drivers/char/ip2/i2lib.c +++ b/drivers/char/ip2/i2lib.c @@ -661,7 +661,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands, if (!in_interrupt()) { schedule_timeout_interruptible(1); // short nap } else { - // we cannot sched/sleep in interrrupt silly + // we cannot sched/sleep in interrupt silly return 0; } if (signal_pending(current)) { diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index e04e66c..0f49ccf 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1251,7 +1251,7 @@ ip2_poll(unsigned long arg) // Just polled boards, IRQ = 0 will hit all non-interrupt boards. // It will NOT poll boards handled by hard interrupts. - // The issue of queued BH interrups is handled in ip2_interrupt(). + // The issue of queued BH interrupts is handled in ip2_interrupt(). ip2_polled_interrupt(); PollTimer.expires = POLL_TIMEOUT; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 905d1f5..d010ed9 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -1544,7 +1544,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info ) /* mgsl_isr_misc() * - * Service a miscellaneos interrupt source. + * Service a miscellaneous interrupt source. * * Arguments: info pointer to device extension (instance data) * Return Value: None diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c index 5422f99..ce5ebe3 100644 --- a/drivers/char/toshiba.c +++ b/drivers/char/toshiba.c @@ -505,7 +505,7 @@ static int __init toshiba_init(void) if (tosh_probe()) return -ENODEV; - printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n"); + printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n"); /* set the port to use for Fn status if not specified as a parameter */ if (tosh_fn==0x00) diff --git a/drivers/dio/dio-driver.c b/drivers/dio/dio-driver.c index e4c48e3..8cd8507 100644 --- a/drivers/dio/dio-driver.c +++ b/drivers/dio/dio-driver.c @@ -15,16 +15,15 @@ #include <linux/dio.h> - /** - * dio_match_device - Tell if a DIO device structure has a matching - * DIO device id structure - * @ids: array of DIO device id structures to search in - * @dev: the DIO device structure to match against - * - * Used by a driver to check whether a DIO device present in the - * system is in its list of supported devices. Returns the matching - * dio_device_id structure or %NULL if there is no match. - */ +/** + * dio_match_device - Tell if a DIO device structure has a matching DIO device id structure + * @ids: array of DIO device id structures to search in + * @d: the DIO device structure to match against + * + * Used by a driver to check whether a DIO device present in the + * system is in its list of supported devices. Returns the matching + * dio_device_id structure or %NULL if there is no match. + */ const struct dio_device_id * dio_match_device(const struct dio_device_id *ids, @@ -66,13 +65,13 @@ static int dio_device_probe(struct device *dev) } - /** - * dio_register_driver - register a new DIO driver - * @drv: the driver structure to register - * - * Adds the driver structure to the list of registered drivers - * Returns zero or a negative error value. - */ +/** + * dio_register_driver - register a new DIO driver + * @drv: the driver structure to register + * + * Adds the driver structure to the list of registered drivers + * Returns zero or a negative error value. + */ int dio_register_driver(struct dio_driver *drv) { @@ -85,15 +84,15 @@ int dio_register_driver(struct dio_driver *drv) } - /** - * dio_unregister_driver - unregister a DIO driver - * @drv: the driver structure to unregister - * - * Deletes the driver structure from the list of registered DIO drivers, - * gives it a chance to clean up by calling its remove() function for - * each device it was responsible for, and marks those devices as - * driverless. - */ +/** + * dio_unregister_driver - unregister a DIO driver + * @drv: the driver structure to unregister + * + * Deletes the driver structure from the list of registered DIO drivers, + * gives it a chance to clean up by calling its remove() function for + * each device it was responsible for, and marks those devices as + * driverless. + */ void dio_unregister_driver(struct dio_driver *drv) { @@ -101,16 +100,15 @@ void dio_unregister_driver(struct dio_driver *drv) } - /** - * dio_bus_match - Tell if a DIO device structure has a matching DIO - * device id structure - * @ids: array of DIO device id structures to search in - * @dev: the DIO device structure to match against - * - * Used by a driver to check whether a DIO device present in the - * system is in its list of supported devices. Returns the matching - * dio_device_id structure or %NULL if there is no match. - */ +/** + * dio_bus_match - Tell if a DIO device structure has a matching DIO device id structure + * @dev: the DIO device structure to match against + * @drv: the &device_driver that points to the array of DIO device id structures to search + * + * Used by a driver to check whether a DIO device present in the + * system is in its list of supported devices. Returns the matching + * dio_device_id structure or %NULL if there is no match. + */ static int dio_bus_match(struct device *dev, struct device_driver *drv) { diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c index 5dee9f5..e0b47b7 100644 --- a/drivers/edac/edac_pci.c +++ b/drivers/edac/edac_pci.c @@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(edac_pci_alloc_ctl_info); * * Last action on the pci control structure. * - * call the remove sysfs informaton, which will unregister + * call the remove sysfs information, which will unregister * this control struct's kobj. When that kobj's ref count * goes to zero, its release function will be call and then * kfree() the memory. diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index a1f24c4..5a85201 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -351,7 +351,7 @@ struct i5000_pvt { u16 b1_ambpresent0; /* Branch 1, Channel 8 */ u16 b1_ambpresent1; /* Branch 1, Channel 1 */ - /* DIMM infomation matrix, allocating architecture maximums */ + /* DIMM information matrix, allocating architecture maximums */ struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS]; /* Actual values for this controller */ diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index d168223..7440119 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -11,7 +11,7 @@ * * This code takes information provided by BIOS EDD calls * fn41 - Check Extensions Present and - * fn48 - Get Device Parametes with EDD extensions + * fn48 - Get Device Parameters with EDD extensions * made in setup.S, copied to safe structures in setup.c, * and presents it in sysfs. * diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index adeda76..3b12ffe 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -199,7 +199,7 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing } /* - * Lenghten active & recovery time so that cycle time is correct. + * Lengthen active & recovery time so that cycle time is correct. */ if (t->act8b + t->rec8b < t->cyc8b) { diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index 1dc2ac9..c5600ac 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/gameport.h> #include <linux/wait.h> -#include <linux/sched.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/kthread.h> diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index e5f4da9..05e3494 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -42,7 +42,6 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/irq.h> #include <asm/portmux.h> #include <asm/mach/bf54x_keys.h> diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index e6696b3..986f93c 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -17,7 +17,6 @@ */ #include <linux/device.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/input.h> diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 3e99df6..adc3bd6 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -141,7 +141,7 @@ static void gscps2_flush(struct gscps2port *ps2port) /* * gscps2_writeb_output() - write a byte to the port * - * returns 1 on sucess, 0 on error + * returns 1 on success, 0 on error */ static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data) diff --git a/drivers/isdn/hardware/eicon/debuglib.c b/drivers/isdn/hardware/eicon/debuglib.c index a19b7ff..e39c5c1 100644 --- a/drivers/isdn/hardware/eicon/debuglib.c +++ b/drivers/isdn/hardware/eicon/debuglib.c @@ -106,7 +106,7 @@ DbgRegister (char *drvName, char *drvTag, unsigned long dbgMask) return (1) ; } /* - * Check if we registered whith an old maint driver (see debuglib.h) + * Check if we registered with an old maint driver (see debuglib.h) */ if ( myDriverDebugHandle.dbg_end != NULL /* location of 'dbg_prt' in _OldDbgHandle_ struct */ diff --git a/drivers/isdn/hardware/eicon/debuglib.h b/drivers/isdn/hardware/eicon/debuglib.h index 11b3b9e..016410c 100644 --- a/drivers/isdn/hardware/eicon/debuglib.h +++ b/drivers/isdn/hardware/eicon/debuglib.h @@ -177,7 +177,7 @@ DBG_DECL(PRV3) } } #endif /* - * For event level debug use a separate define, the paramete are + * For event level debug use a separate define, the parameter are * different and cause compiler errors on some systems. */ #define DBG_EVL_ID(args) \ diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c index ce8df38..10760b3 100644 --- a/drivers/isdn/hardware/eicon/di.c +++ b/drivers/isdn/hardware/eicon/di.c @@ -285,7 +285,7 @@ byte pr_dpc(ADAPTER * a) a->ram_in(a, &RcIn->RcId), a->ram_in(a, &RcIn->RcCh), a->ram_inw(a, &RcIn->Reference), - tmp[0], /* type of extended informtion */ + tmp[0], /* type of extended information */ tmp[1]); /* extended information */ a->ram_out(a, &RcIn->Rc, 0); } diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index ccd35d0..b9177ca 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -4941,7 +4941,7 @@ void sig_ind(PLCI * plci) /* b = IE1 */ /* S = IE1 length + cont. */ /* b = IE2 */ - /* S = IE2 lenght + cont. */ + /* S = IE2 length + cont. */ sendf(plci->appl, _MANUFACTURER_I, Id, diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c index f854501..d3999a8 100644 --- a/drivers/isdn/hysdn/hycapi.c +++ b/drivers/isdn/hysdn/hycapi.c @@ -541,7 +541,7 @@ hycapi_rx_capipkt(hysdn_card * card, unsigned char *buf, unsigned short len) } ctrl = &cinfo->capi_ctrl; if(len < CAPI_MSG_BASELEN) { - printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, lenght %d!\n", + printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n", card->myid, len); return; } diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index d409f67..8ba4938 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -12,7 +12,7 @@ * - maybe add timeout to commands ? * - blocking version of time functions * - polling version of i2c commands (including timer that works with - * interrutps off) + * interrupts off) * - maybe avoid some data copies with i2c by directly using the smu cmd * buffer and a lower level internal interface * - understand SMU -> CPU events and implement reception of them via @@ -179,7 +179,7 @@ static irqreturn_t smu_db_intr(int irq, void *arg) /* CPU might have brought back the cache line, so we need * to flush again before peeking at the SMU response. We * flush the entire buffer for now as we haven't read the - * reply lenght (it's only 2 cache lines anyway) + * reply length (it's only 2 cache lines anyway) */ faddr = (unsigned long)smu->cmd_buf; flush_inval_dcache_range(faddr, faddr + 256); diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index 7d04a6f..168a8d3 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -388,7 +388,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent } dev->revision &= 0xf; - /* remap the memory from virtual to physical adress */ + /* remap the memory from virtual to physical address */ err = pci_request_region(pci, 0, "saa7146"); if (err < 0) diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index a33eb59..ed3f826 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -681,7 +681,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) drop = 1; /* else: destination address matches the MAC address of our receiver device */ } - /* else: promiscious mode; pass everything up the stack */ + /* else: promiscuous mode; pass everything up the stack */ if (drop) { #ifdef ULE_DEBUG diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 63a47cd..7374c02 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4344,7 +4344,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) gpio_bits(0x200,0x000); mdelay(1); - /* create a new conection */ + /* create a new connection */ gpio_bits(0x480,0x080); gpio_bits(0x480,0x480); mdelay(1); diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c index 5c2c402..84b9e4f 100644 --- a/drivers/media/video/indycam.c +++ b/drivers/media/video/indycam.c @@ -326,7 +326,7 @@ static int indycam_attach(struct i2c_adapter *adap, int addr, int kind) // initialize err = indycam_write_block(client, 0, sizeof(initseq), (u8 *)&initseq); if (err) { - printk(KERN_ERR "IndyCam initalization failed\n"); + printk(KERN_ERR "IndyCam initialization failed\n"); err = -EIO; goto out_detach_client; } diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c index b630c26..58bab65 100644 --- a/drivers/media/video/mt20xx.c +++ b/drivers/media/video/mt20xx.c @@ -369,7 +369,7 @@ static struct dvb_tuner_ops mt2032_tuner_ops = { .get_frequency = microtune_get_frequency, }; -// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001 +// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001 static int mt2032_init(struct dvb_frontend *fe) { struct microtune_priv *priv = fe->tuner_priv; diff --git a/drivers/media/video/pvrusb2/pvrusb2.h b/drivers/media/video/pvrusb2/pvrusb2.h index 074533e..1a9a4ba 100644 --- a/drivers/media/video/pvrusb2/pvrusb2.h +++ b/drivers/media/video/pvrusb2/pvrusb2.h @@ -27,7 +27,7 @@ might want to increase this - however the driver operation will not be impaired if it is too small. Instead additional units just won't have an ID assigned and it might not be possible to specify - module paramters for those extra units. */ + module parameters for those extra units. */ #define PVR_NUM 20 #endif /* __PVRUSB2_H */ diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 7300ace..f991d72 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -542,7 +542,7 @@ int pwc_handle_frame(struct pwc_device *pdev) } if (pdev->read_frame != NULL) { - /* Decompression is a lenghty process, so it's outside of the lock. + /* Decompression is a lengthy process, so it's outside of the lock. This gives the isoc_handler the opportunity to fill more frames in the mean time. */ diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index e0ff811..ca05cd6 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -57,7 +57,7 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g); - /* check if the paramters are valid */ + /* check if the parameters are valid */ if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0) return -1; diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index d847273..5e7b795 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -258,7 +258,7 @@ static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b) unsigned int p; /* - the registers controling gain are 8 bit of which + the registers controlling gain are 8 bit of which we affect only the last 4 bits with our gain. we know that if saturation is 0, (unsaturated) then we're grayscale (center axis of the colour cone) so diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index b52b826..df52f8a 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -131,7 +131,7 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { /* Function prototypes */ static void usbvision_release(struct usb_usbvision *usbvision); -/* Default initalization of device driver parameters */ +/* Default initialization of device driver parameters */ /* Set the default format for ISOC endpoint */ static int isocMode = ISOC_MODE_COMPRESS; /* Set the default Debug Mode of the device driver */ diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 8ef31ed..a913385 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -566,7 +566,7 @@ vpx3220_init_client (struct i2c_client *client) } /* ----------------------------------------------------------------------- - * Client managment code + * Client management code */ /* diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 6e0ac4c..690281b 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -1270,7 +1270,7 @@ zoran_setup_videocodec (struct zoran *zr, } /* - * Scan for a Buz card (actually for the PCI contoler ZR36057), + * Scan for a Buz card (actually for the PCI controller ZR36057), * request the irq and map the io memory */ static int __devinit diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c index 9f622e0..faae4ec 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -161,7 +161,7 @@ zr36050_wait_end (struct zr36050 *ptr) udelay(1); if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, - "%s: timout at wait_end (last status: 0x%02x)\n", + "%s: timeout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status1); break; } diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c index 1ef14fe..7849b65 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -163,7 +163,7 @@ zr36060_wait_end (struct zr36060 *ptr) udelay(1); if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, - "%s: timout at wait_end (last status: 0x%02x)\n", + "%s: timeout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status); break; } diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index 6be1f6b..af9da03 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -162,7 +162,7 @@ #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */ /* Bit 0 is Status Bit 0: FrameXferErr */ /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */ - /* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */ + /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */ #define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500) #define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600) diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 6029509..e630b50 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -1708,7 +1708,7 @@ mptctl_replace_fw (unsigned long arg) * * Outputs: None. * Return: 0 if successful - * -EBUSY if previous command timout and IOC reset is not complete. + * -EBUSY if previous command timeout and IOC reset is not complete. * -EFAULT if data unavailable * -ENODEV if no such device/adapter * -ETIME if timer expires @@ -1748,7 +1748,7 @@ mptctl_mpt_command (unsigned long arg) * * Outputs: None. * Return: 0 if successful - * -EBUSY if previous command timout and IOC reset is not complete. + * -EBUSY if previous command timeout and IOC reset is not complete. * -EFAULT if data unavailable * -ENODEV if no such device/adapter * -ETIME if timer expires @@ -2316,7 +2316,7 @@ done_free_mem: * Outputs: None. * Return: 0 if successful * -EFAULT if data unavailable - * -EBUSY if previous command timout and IOC reset is not complete. + * -EBUSY if previous command timeout and IOC reset is not complete. * -ENODEV if no such device/adapter * -ETIME if timer expires * -ENOMEM if memory allocation error @@ -2553,7 +2553,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size) * Outputs: None. * Return: 0 if successful * -EFAULT if data unavailable - * -EBUSY if previous command timout and IOC reset is not complete. + * -EBUSY if previous command timeout and IOC reset is not complete. * -ENODEV if no such device/adapter * -ETIME if timer expires * -ENOMEM if memory allocation error diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 5c614ec..af1de0c 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1736,7 +1736,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, i fail_out: /* - * Free task managment mf, and corresponding tm flags + * Free task management mf, and corresponding tm flags */ mpt_free_msg_frame(ioc, mf); hd->tmPending = 0; diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 7814a06..da715e1 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -916,7 +916,7 @@ static int i2o_parse_hrt(struct i2o_controller *c) * status block. The status block could then be accessed through * c->status_block. * - * Returns 0 on sucess or negative error code on failure. + * Returns 0 on success or negative error code on failure. */ int i2o_status_get(struct i2o_controller *c) { diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index c73e96b..90acf57 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -376,7 +376,7 @@ static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) * hardware restriction. */ if (doc->mfr) { if (doc->mfr == mfr && doc->id == id) - return 1; /* This is another the same the first */ + return 1; /* This is the same as the first */ else printk(KERN_WARNING "Flash chip at floor %d, chip %d is different:\n", diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index e3744eb..dd38011 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -20,7 +20,7 @@ * * 02-12-2002 TG Cleanup of module params * - * 02-20-2002 TG adjusted for different rd/wr adress support + * 02-20-2002 TG adjusted for different rd/wr address support * added support for read device ready/busy line * added page_cache * @@ -144,7 +144,7 @@ static int __init autcpu12_init(void) goto out; } - /* map physical adress */ + /* map physical address */ autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); if (!autcpu12_fio_base) { printk("Ioremap autcpu12 SmartMedia Card failed\n"); @@ -227,7 +227,7 @@ static void __exit autcpu12_cleanup(void) /* Release resources, unregister device */ nand_release(autcpu12_mtd); - /* unmap physical adress */ + /* unmap physical address */ iounmap(autcpu12_fio_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 1657ecd..a52f3a7 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -4,7 +4,7 @@ * http://blackfin.uclinux.org/ * Bryan Wu <bryan.wu@analog.com> * - * Blackfin BF5xx on-chip NAND flash controler driver + * Blackfin BF5xx on-chip NAND flash controller driver * * Derived from drivers/mtd/nand/s3c2410.c * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk> diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 89deff0..19e1594 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -337,7 +337,7 @@ static void __exit cs553x_cleanup(void) nand_release(cs553x_mtd[i]); cs553x_mtd[i] = NULL; - /* unmap physical adress */ + /* unmap physical address */ iounmap(mmio_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c index 0146cdc..ba67bbe 100644 --- a/drivers/mtd/nand/edb7312.c +++ b/drivers/mtd/nand/edb7312.c @@ -125,7 +125,7 @@ static int __init ep7312_init(void) return -ENOMEM; } - /* map physical adress */ + /* map physical address */ ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K); if (!ep7312_fio_base) { printk("ioremap EDB7312 NAND flash failed\n"); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index e29c1da..ddd4fc0 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -89,7 +89,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); /* - * For devices which display every fart in the system on a seperate LED. Is + * For devices which display every fart in the system on a separate LED. Is * compiled away when LED support is disabled. */ DEFINE_LED_TRIGGER(nand_led_trigger); diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 10490b4..bb885d1 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -210,7 +210,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define STATE_CMD_RESET 0x0000000C /* reset */ #define STATE_CMD_MASK 0x0000000F /* command states mask */ -/* After an addres is input, the simulator goes to one of these states */ +/* After an address is input, the simulator goes to one of these states */ #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */ #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */ #define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */ diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 66f76e9..2bd0737 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -8,7 +8,7 @@ * * Changelog: * 21-Sep-2004 BJD Initial version - * 23-Sep-2004 BJD Mulitple device support + * 23-Sep-2004 BJD Multiple device support * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode * 12-Oct-2004 BJD Fixed errors in use of platform data * 18-Feb-2005 BJD Fix sparse errors diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 51c7288..033f880 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -165,7 +165,7 @@ static int __init sharpsl_nand_init(void) return -ENOMEM; } - /* map physical adress */ + /* map physical address */ sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000); if (!sharpsl_io_base) { printk("ioremap to access Sharp SL NAND chip failed\n"); diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index 067262ee..0513cbc 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -429,7 +429,7 @@ static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_b } } -/* calc_chain_lenght: Walk through a Virtual Unit Chain and estimate chain length */ +/* calc_chain_length: Walk through a Virtual Unit Chain and estimate chain length */ static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block) { unsigned int length = 0, block = first_block; diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index d5459a8..2eb82ab 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -9,7 +9,7 @@ * Many modifications, and currently maintained, by * Philip Blundell <philb@gnu.org> * Added the Compaq LTE Alan Cox <alan@redhat.com> - * Added MCA support Adam Fritzler <mid@auk.cx> + * Added MCA support Adam Fritzler * * Note - this driver is experimental still - it has problems on faster * machines. Someone needs to sit down and go through it line by line with diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h index e489c66..0787657 100644 --- a/drivers/net/irda/ali-ircc.h +++ b/drivers/net/irda/ali-ircc.h @@ -173,13 +173,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index bbdc97f..29398a4 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -231,13 +231,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h index 204b1b3..9d012f0 100644 --- a/drivers/net/irda/via-ircc.h +++ b/drivers/net/irda/via-ircc.h @@ -54,13 +54,13 @@ struct st_fifo { struct frame_cb { void *start; /* Start of frame in DMA mem */ - int len; /* Lenght of frame in DMA mem */ + int len; /* Length of frame in DMA mem */ }; struct tx_fifo { struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */ int ptr; /* Currently being sent */ - int len; /* Lenght of queue */ + int len; /* Length of queue */ int free; /* Next free slot */ void *tail; /* Next free start in DMA mem */ }; diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c index c429a50..0c5447d 100644 --- a/drivers/net/lib8390.c +++ b/drivers/net/lib8390.c @@ -148,7 +148,7 @@ static void __NS8390_init(struct net_device *dev, int startp); * * "The author (me) didn't use spin_lock_irqsave because the slowness of the * card means that approach caused horrible problems like losing serial data - * at 38400 baud on some chips. Rememeber many 8390 nics on PCI were ISA + * at 38400 baud on some chips. Remember many 8390 nics on PCI were ISA * chips with FPGA front ends. * * Ok the logic behind the 8390 is very simple: diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index 62b0132..889f987 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc) req->cmd.sba_cmd = REQUEST_ALLOCATION ; /* - * set the parameter type and parameter lenght of all used + * set the parameter type and parameter length of all used * parameters */ diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c index a45205d..76dc8ad 100644 --- a/drivers/net/skfp/fplustm.c +++ b/drivers/net/skfp/fplustm.c @@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac, /* u_long td; transmit descriptor */ /* struct fddi_mac *mac; mac frame pointer */ /* unsigned off; start address within buffer memory */ -/* int len ; lenght of the frame including the FC */ +/* int len ; length of the frame including the FC */ { int i ; u_int *p ; diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c index 8a430a3..46e3393 100644 --- a/drivers/net/skfp/hwmtm.c +++ b/drivers/net/skfp/hwmtm.c @@ -1185,7 +1185,7 @@ void process_receive(struct s_smc *smc) DB_RX("frame length = %d",len,0,4) ; /* - * check the frame_lenght and all error flags + * check the frame_length and all error flags */ if (rfsw & (RX_MSRABT|RX_FS_E|RX_FS_CRC|RX_FS_IMPL)){ if (rfsw & RD_S_MSRABT) { diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c index 124cfd4..7a7de04 100644 --- a/drivers/net/tokenring/abyss.c +++ b/drivers/net/tokenring/abyss.c @@ -10,7 +10,7 @@ * - Madge Smart 16/4 PCI Mk2 * * Maintainer(s): - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * * Modification History: * 30-Dec-99 AF Split off from the tms380tr driver. diff --git a/drivers/net/tokenring/abyss.h b/drivers/net/tokenring/abyss.h index 0ee6e4f..b0a473b 100644 --- a/drivers/net/tokenring/abyss.h +++ b/drivers/net/tokenring/abyss.h @@ -2,7 +2,7 @@ * abyss.h: Header for the abyss tms380tr module * * Authors: - * - Adam Fritzler <mid@auk.cx> + * - Adam Fritzler */ #ifndef __LINUX_MADGETR_H diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 5a41513..c9c5a2b 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -11,7 +11,7 @@ * - Madge Smart 16/4 Ringnode MC32 (??) * * Maintainer(s): - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * * Modification History: * 16-Jan-00 AF Created diff --git a/drivers/net/tokenring/madgemc.h b/drivers/net/tokenring/madgemc.h index 2dd8222..fe88e27 100644 --- a/drivers/net/tokenring/madgemc.h +++ b/drivers/net/tokenring/madgemc.h @@ -2,7 +2,7 @@ * madgemc.h: Header for the madgemc tms380tr module * * Authors: - * - Adam Fritzler <mid@auk.cx> + * - Adam Fritzler */ #ifndef __LINUX_MADGEMC_H diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index ca6b659..00ea945 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -12,7 +12,7 @@ * - Proteon 1392, 1392+ * * Maintainer(s): - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * JF Jochen Friedrich jochen@scram.de * * Modification History: diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index 32e8d5a..41b6999 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -13,7 +13,7 @@ * - SysKonnect TR4/16(+) ISA (SK-4190) * * Maintainer(s): - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * JF Jochen Friedrich jochen@scram.de * * Modification History: diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index d5fa36d..d07c452 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -30,7 +30,7 @@ * Maintainer(s): * JS Jay Schulist jschlst@samba.org * CG Christoph Goos cgoos@syskonnect.de - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * MLP Mike Phillips phillim@amtrak.com * JF Jochen Friedrich jochen@scram.de * diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h index 7daf74e..7af76d7 100644 --- a/drivers/net/tokenring/tms380tr.h +++ b/drivers/net/tokenring/tms380tr.h @@ -3,7 +3,7 @@ * * Authors: * - Christoph Goos <cgoos@syskonnect.de> - * - Adam Fritzler <mid@auk.cx> + * - Adam Fritzler */ #ifndef __LINUX_TMS380TR_H diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c index 1c18f78..5f0ee88 100644 --- a/drivers/net/tokenring/tmspci.c +++ b/drivers/net/tokenring/tmspci.c @@ -14,7 +14,7 @@ * - 3Com 3C339 Token Link Velocity * * Maintainer(s): - * AF Adam Fritzler mid@auk.cx + * AF Adam Fritzler * * Modification History: * 30-Dec-99 AF Split off from the tms380tr driver. diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index d347d59..d14e667 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; - /* boot buffer lenght */ + /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); @@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; - /* boot buffer lenght */ + /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 9a61188..69f94c9 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -1473,7 +1473,7 @@ int lbs_get_scan(struct net_device *dev, struct iw_request_info *info, * Called via lbs_prepare_and_send_command(priv, CMD_802_11_SCAN, ...) * from cmd.c * - * Sends a fixed lenght data part (specifying the BSS type and BSSID filters) + * Sends a fixed length data part (specifying the BSS type and BSSID filters) * as well as a variable number/length of TLVs to the firmware. * * @param priv A pointer to struct lbs_private structure diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c index e503c9c..f4076ae 100644 --- a/drivers/nubus/nubus.c +++ b/drivers/nubus/nubus.c @@ -352,7 +352,7 @@ nubus_find_rsrc(struct nubus_dir* dir, unsigned char rsrc_type, resource blocks. */ /* FIXME: A lot of this stuff will eventually be useful after - initializaton, for intelligently probing Ethernet and video chips, + initialization, for intelligently probing Ethernet and video chips, among other things. The rest of it should go in the /proc code. For now, we just use it to give verbose boot logs. */ diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 7c60cbd..ca52307 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -363,7 +363,7 @@ ccio_alloc_range(struct ioc *ioc, size_t size) if (pages_needed <= 8) { /* * LAN traffic will not thrash the TLB IFF the same NIC - * uses 8 adjacent pages to map seperate payload data. + * uses 8 adjacent pages to map separate payload data. * ie the same byte in the resource bit map. */ #if 0 @@ -1589,7 +1589,7 @@ static int __init ccio_probe(struct parisc_device *dev) } /** - * ccio_init - ccio initalization procedure. + * ccio_init - ccio initialization procedure. * * Register this driver. */ diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index a728a7c..65eee67 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -95,7 +95,7 @@ static struct parisc_driver hppb_driver = { }; /** - * hppb_init - HP-PB bus initalization procedure. + * hppb_init - HP-PB bus initialization procedure. * * Register this driver. */ diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c index 853a15f..cd565bb 100644 --- a/drivers/parport/probe.c +++ b/drivers/parport/probe.c @@ -163,7 +163,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer, idlens[1] = idlens[0]+2; if (belen != lelen) { int off = 2; - /* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */ + /* Don't try lengths of 0x100 and 0x200 as 1 and 2 */ if (idlens[0] <= 2) off = 0; idlens[off] = max(belen, lelen); diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index c5e0d89..ec4c125 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -368,7 +368,7 @@ static irqreturn_t pcc_interrupt(int irq, void *dev) handled = 1; irc = pcc_get(i, PCIRC); irc >>=16; - debug(2, "m32r-pcc:interrput: socket %d pcirc 0x%02x ", i, irc); + debug(2, "m32r-pcc:interrupt: socket %d pcirc 0x%02x ", i, irc); if (!irc) continue; diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index d182760..4ea426a 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -851,7 +851,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state) I tried to control the CxOE signal with SS_OUTPUT_ENA, but the reset signal seems connected via the 541. If the CxOE is left high are some signals tristated and - no pullups are present -> the cards act wierd. + no pullups are present -> the cards act weird. So right now the buffers are enabled if the power is on. */ if (state->Vcc || state->Vpp) diff --git a/drivers/scsi/NCR53C9x.h b/drivers/scsi/NCR53C9x.h index d85cb73..00a0ba0 100644 --- a/drivers/scsi/NCR53C9x.h +++ b/drivers/scsi/NCR53C9x.h @@ -1,6 +1,6 @@ /* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver. * - * Originaly esp.h: Defines and structures for the Sparc ESP + * Originally esp.h: Defines and structures for the Sparc ESP * (Enhanced SCSI Processor) driver under Linux. * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 190568e..5a1471c 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -21,7 +21,7 @@ * Modified by Chris Faulhaber <jedgar@fxp.org> * Added module command-line options * 19-Jul-99 - * Modified by Adam Fritzler <mid@auk.cx> + * Modified by Adam Fritzler * Added proper detection of the AHA-1640 (MCA version of AHA-1540) */ diff --git a/drivers/scsi/aic7xxx/aic79xx_inline.h b/drivers/scsi/aic7xxx/aic79xx_inline.h index 2ceb67f..45e5557 100644 --- a/drivers/scsi/aic7xxx/aic79xx_inline.h +++ b/drivers/scsi/aic7xxx/aic79xx_inline.h @@ -417,7 +417,7 @@ ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index) - (uint8_t *)ahd->qoutfifo); } -/*********************** Miscelaneous Support Functions ***********************/ +/*********************** Miscellaneous Support Functions ***********************/ static __inline struct ahd_initiator_tinfo * ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id, diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 0146547..72fccd9 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -325,7 +325,7 @@ MODULE_PARM_DESC(aic79xx, " verbose Enable verbose/diagnostic logging\n" " allow_memio Allow device registers to be memory mapped\n" " debug Bitmask of debug values to enable\n" -" no_reset Supress initial bus resets\n" +" no_reset Suppress initial bus resets\n" " extended Enable extended geometry on all controllers\n" " periodic_otag Send an ordered tagged transaction\n" " periodically to prevent tag starvation.\n" diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c index df85367..c9f79fd 100644 --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -979,7 +979,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd) | AHD_FAINT_LED_BUG; /* - * IO Cell paramter setup. + * IO Cell parameter setup. */ AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29); @@ -1006,7 +1006,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd) ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG; /* - * IO Cell paramter setup. + * IO Cell parameter setup. */ AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29); AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB); diff --git a/drivers/scsi/aic7xxx/aic7xxx_inline.h b/drivers/scsi/aic7xxx/aic7xxx_inline.h index 8e1954c..cba2f23 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_inline.h +++ b/drivers/scsi/aic7xxx/aic7xxx_inline.h @@ -229,7 +229,7 @@ ahc_name(struct ahc_softc *ahc) return (ahc->name); } -/*********************** Miscelaneous Support Functions ***********************/ +/*********************** Miscellaneous Support Functions ***********************/ static __inline void ahc_update_residual(struct ahc_softc *ahc, struct scb *scb); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 99a3b33..282aff6 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -347,7 +347,7 @@ MODULE_PARM_DESC(aic7xxx, " debug Bitmask of debug values to enable\n" " no_probe Toggle EISA/VLB controller probing\n" " probe_eisa_vl Toggle EISA/VLB controller probing\n" -" no_reset Supress initial bus resets\n" +" no_reset Suppress initial bus resets\n" " extended Enable extended geometry on all controllers\n" " periodic_otag Send an ordered tagged transaction\n" " periodically to prevent tag starvation.\n" diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 73270ff..2074701 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -7053,7 +7053,7 @@ static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev, * where it can accept new commands. * Return value: - * 0 on sucess / -EIO on failure + * 0 on success / -EIO on failure **/ static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg) { diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 7505cca..bb152fb 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -1309,7 +1309,7 @@ ips_intr_copperhead(ips_ha_t * ha) cstatus.value = (*ha->func.statupd) (ha); if (cstatus.fields.command_id > (IPS_MAX_CMDS - 1)) { - /* Spurious Interupt ? */ + /* Spurious Interrupt ? */ continue; } diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index f26b953..83567b9 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -325,7 +325,7 @@ struct lpfc_vport { #define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */ #define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */ -#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timout */ +#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */ #define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */ #define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */ diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index dfc63f6..7a9be4c 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -880,7 +880,7 @@ lpfc_mbox_get(struct lpfc_hba * phba) void lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) { - /* This function expects to be called from interupt context */ + /* This function expects to be called from interrupt context */ spin_lock(&phba->hbalock); list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); spin_unlock(&phba->hbalock); diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 6db77c0..9f04192 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -3464,12 +3464,12 @@ megaraid_mbox_setup_device_map(adapter_t *adapter) /* * START: Interface for the common management module * - * This is the module, which interfaces with the common mangement module to + * This is the module, which interfaces with the common management module to * provide support for ioctl and sysfs */ /** - * megaraid_cmm_register - register with the mangement module + * megaraid_cmm_register - register with the management module * @adapter : HBA soft state * * Register with the management module, which allows applications to issue @@ -3557,7 +3557,7 @@ megaraid_cmm_register(adapter_t *adapter) /** - * megaraid_cmm_unregister - un-register with the mangement module + * megaraid_cmm_unregister - un-register with the management module * @adapter : HBA soft state * * Un-register with the management module. @@ -3579,7 +3579,7 @@ megaraid_cmm_unregister(adapter_t *adapter) * @kioc : CMM interface packet * @action : command action * - * This routine is invoked whenever the Common Mangement Module (CMM) has a + * This routine is invoked whenever the Common Management Module (CMM) has a * command for us. The 'action' parameter specifies if this is a new command * or otherwise. */ @@ -3944,7 +3944,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) * * This routine will be called whenever user reads the logical drive * attributes, go get the current logical drive mapping table from the - * firmware. We use the managment API's to issue commands to the controller. + * firmware. We use the management API's to issue commands to the controller. * * NOTE: The commands issuance functionality is not generalized and * implemented in context of "get ld map" command only. If required, the diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index eb0784c..6226d88 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1094,7 +1094,7 @@ qla2x00_sns_rnn_id(scsi_qla_host_t *ha) } /** - * qla2x00_mgmt_svr_login() - Login to fabric Managment Service. + * qla2x00_mgmt_svr_login() - Login to fabric Management Service. * @ha: HA context * * Returns 0 on success. diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index accaf690..d6be076 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -121,7 +121,7 @@ #define MAX_REQS_SERVICED_PER_INTR 16 #define ISCSI_IPADDR_SIZE 4 /* IP address size */ -#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alais name size */ +#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */ #define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */ #define LSDW(x) ((u32)((u64)(x))) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index cbe0a17..49925f9 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1098,7 +1098,7 @@ static int qla4xxx_start_firmware(struct scsi_qla_host *ha) } config_chip = 1; - /* Reset clears the semaphore, so aquire again */ + /* Reset clears the semaphore, so acquire again */ if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) return QLA_ERROR; } diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 91630ba..3677fbb 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -320,7 +320,7 @@ int scsi_tgt_queue_command(struct scsi_cmnd *cmd, u64 itn_id, EXPORT_SYMBOL_GPL(scsi_tgt_queue_command); /* - * This is run from a interrpt handler normally and the unmap + * This is run from a interrupt handler normally and the unmap * needs process context so we must queue */ static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd) diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index f2149d0..43a964d 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -6,7 +6,7 @@ * * The SAS transport class contains common code to deal with SAS HBAs, * an aproximated representation of SAS topologies in the driver model, - * and various sysfs attributes to expose these topologies and managment + * and various sysfs attributes to expose these topologies and management * interfaces to userspace. * * In addition to the basic SCSI core objects this transport class diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 8a053ea..4fa7927 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1295,8 +1295,8 @@ config SERIAL_NETX_CONSOLE depends on SERIAL_NETX select SERIAL_CORE_CONSOLE help - If you have enabled the serial port on the Motorola IMX - CPU you can make it the console by answering Y to this option. + If you have enabled the serial port on the Hilscher NetX SoC + you can make it the console by answering Y to this option. config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h index 0274554..c8029e0 100644 --- a/drivers/serial/icom.h +++ b/drivers/serial/icom.h @@ -20,7 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include<linux/serial_core.h> +#include <linux/serial_core.h> #define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) static int icom_acfg_baud[] = { diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 8321101..e940317 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -582,7 +582,7 @@ static struct parisc_driver serial_mux_driver = { }; /** - * mux_init - Serial MUX initalization procedure. + * mux_init - Serial MUX initialization procedure. * * Register the Serial MUX driver. */ diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 2cd8573..639963e 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -157,7 +157,7 @@ #define SPI_FIFO_BYTE_WIDTH (2) #define SPI_FIFO_OVERFLOW_MARGIN (2) -/* DMA burst lenght for half full/empty request trigger */ +/* DMA burst length for half full/empty request trigger */ #define SPI_DMA_BLR (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2) /* Dummy char output to achieve reads. diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c index 1a31f7a..2d27d6d 100644 --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -1,7 +1,7 @@ /* * Broadcom 43xx PCI-SSB bridge module * - * This technically is a seperate PCI driver module, but + * This technically is a separate PCI driver module, but * because of its small size we include it in the SSB core * instead of creating a standalone module. * diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 83ee3e7..675abda 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2561,7 +2561,7 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) pci_read_config_dword(rinfo->pdev, i * 4, &rinfo->cfg_save[i]); - /* Switch PCI power managment to D2. */ + /* Switch PCI power management to D2. */ pci_disable_device(rinfo->pdev); for (;;) { pci_read_config_word( diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c index e23324d..9704b73 100644 --- a/drivers/video/cyblafb.c +++ b/drivers/video/cyblafb.c @@ -1156,7 +1156,7 @@ static struct fb_ops cyblafb_ops __devinitdata = { // need altered timings to display correctly. So I decided that it is much // better to provide a limited optimized set of modes plus the option of // using the mode in effect at startup time (might be selected using the -// vga=??? paramter). After that the user might use fbset to select any +// vga=??? parameter). After that the user might use fbset to select any // mode he likes, check_var will not try to alter geometry parameters as // it would be necessary otherwise. // diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h index 2fe3f7d..8367961 100644 --- a/drivers/video/intelfb/intelfb.h +++ b/drivers/video/intelfb/intelfb.h @@ -111,7 +111,7 @@ #define FIXED_MODE(d) ((d)->fixed_mode) -/*** Driver paramters ***/ +/*** Driver parameters ***/ #define RINGBUFFER_SIZE KB(64) #define HW_CURSOR_SIZE KB(4) diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 9085188..fb19ed4 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -312,7 +312,7 @@ static irqreturn_t lcdc_irq_handler(int irq, void *dev_id) /* * Change to a new video mode. We defer this to a later time to avoid any * flicker and not to mess up the current LCD DMA context. For this we disable - * the LCD controler, which will generate a DONE irq after the last frame has + * the LCD controller, which will generate a DONE irq after the last frame has * been transferred. Then it'll be safe to reconfigure both the LCD controller * as well as the LCD DMA. */ diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 1be95a68..58f200c 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -48,7 +48,7 @@ enum sm501_controller { HEAD_PANEL = 1, }; -/* SM501 memory adress */ +/* SM501 memory address */ struct sm501_mem { unsigned long size; unsigned long sm_addr; diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index cecbedd..61dde86 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -52,7 +52,7 @@ * overflow periods respectively. * * Also, since we can't really expect userspace to be responsive enough - * before the overflow happens, we maintain two seperate timers .. One in + * before the overflow happens, we maintain two separate timers .. One in * the kernel for clearing out WOVF every 2ms or so (again, this depends on * HZ == 1000), and another for monitoring userspace writes to the WDT device. * |