summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2011-11-10 08:39:32 (GMT)
committerSascha Hauer <s.hauer@pengutronix.de>2011-11-11 15:53:35 (GMT)
commitf750ba9b8db2a926c315ccfa9e95d12fe4590a22 (patch)
tree1bdd2ce107b6a39b4797dab955a003e7a9c1e0ba /drivers
parent1b929995ebc0f00cc56ddc14cf75a875f4d565d6 (diff)
downloadlinux-fsl-qoriq-f750ba9b8db2a926c315ccfa9e95d12fe4590a22.tar.xz
arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c8
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..4b976f0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -32,6 +32,7 @@
/* VENDOR SPEC register */
#define SDHCI_VENDOR_SPEC 0xC0
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+#define SDHCI_WTMK_LVL 0x44
#define SDHCI_MIX_CTRL 0x48
/*
@@ -476,6 +477,13 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (is_imx53_esdhc(imx_data))
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+ /*
+ * The imx6q ROM code will change the default watermark level setting
+ * to something insane. Change it back here.
+ */
+ if (is_imx6q_usdhc(imx_data))
+ writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {