diff options
author | Thomas Gleixner <tglx@linutronix.de> | 2007-10-11 09:20:03 (GMT) |
---|---|---|
committer | Thomas Gleixner <tglx@linutronix.de> | 2007-10-11 09:20:03 (GMT) |
commit | 96a388de5dc53a8b234b3fd41f3ae2cedc9ffd42 (patch) | |
tree | d947a467aa2da3140279617bc4b9b101640d7bf4 /include/asm-x86/voyager.h | |
parent | 27bd0c955648646abf2a353a8371d28c37bcd982 (diff) | |
download | linux-fsl-qoriq-96a388de5dc53a8b234b3fd41f3ae2cedc9ffd42.tar.xz |
i386/x86_64: move headers to include/asm-x86
Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'include/asm-x86/voyager.h')
-rw-r--r-- | include/asm-x86/voyager.h | 517 |
1 files changed, 517 insertions, 0 deletions
diff --git a/include/asm-x86/voyager.h b/include/asm-x86/voyager.h new file mode 100644 index 0000000..91a9932 --- /dev/null +++ b/include/asm-x86/voyager.h @@ -0,0 +1,517 @@ +/* Copyright (C) 1999,2001 + * + * Author: J.E.J.Bottomley@HansenPartnership.com + * + * Standard include definitions for the NCR Voyager system */ + +#undef VOYAGER_DEBUG +#undef VOYAGER_CAT_DEBUG + +#ifdef VOYAGER_DEBUG +#define VDEBUG(x) printk x +#else +#define VDEBUG(x) +#endif + +/* There are three levels of voyager machine: 3,4 and 5. The rule is + * if it's less than 3435 it's a Level 3 except for a 3360 which is + * a level 4. A 3435 or above is a Level 5 */ +#define VOYAGER_LEVEL5_AND_ABOVE 0x3435 +#define VOYAGER_LEVEL4 0x3360 + +/* The L4 DINO ASIC */ +#define VOYAGER_DINO 0x43 + +/* voyager ports in standard I/O space */ +#define VOYAGER_MC_SETUP 0x96 + + +#define VOYAGER_CAT_CONFIG_PORT 0x97 +# define VOYAGER_CAT_DESELECT 0xff +#define VOYAGER_SSPB_RELOCATION_PORT 0x98 + +/* Valid CAT controller commands */ +/* start instruction register cycle */ +#define VOYAGER_CAT_IRCYC 0x01 +/* start data register cycle */ +#define VOYAGER_CAT_DRCYC 0x02 +/* move to execute state */ +#define VOYAGER_CAT_RUN 0x0F +/* end operation */ +#define VOYAGER_CAT_END 0x80 +/* hold in idle state */ +#define VOYAGER_CAT_HOLD 0x90 +/* single step an "intest" vector */ +#define VOYAGER_CAT_STEP 0xE0 +/* return cat controller to CLEMSON mode */ +#define VOYAGER_CAT_CLEMSON 0xFF + +/* the default cat command header */ +#define VOYAGER_CAT_HEADER 0x7F + +/* the range of possible CAT module ids in the system */ +#define VOYAGER_MIN_MODULE 0x10 +#define VOYAGER_MAX_MODULE 0x1f + +/* The voyager registers per asic */ +#define VOYAGER_ASIC_ID_REG 0x00 +#define VOYAGER_ASIC_TYPE_REG 0x01 +/* the sub address registers can be made auto incrementing on reads */ +#define VOYAGER_AUTO_INC_REG 0x02 +# define VOYAGER_AUTO_INC 0x04 +# define VOYAGER_NO_AUTO_INC 0xfb +#define VOYAGER_SUBADDRDATA 0x03 +#define VOYAGER_SCANPATH 0x05 +# define VOYAGER_CONNECT_ASIC 0x01 +# define VOYAGER_DISCONNECT_ASIC 0xfe +#define VOYAGER_SUBADDRLO 0x06 +#define VOYAGER_SUBADDRHI 0x07 +#define VOYAGER_SUBMODSELECT 0x08 +#define VOYAGER_SUBMODPRESENT 0x09 + +#define VOYAGER_SUBADDR_LO 0xff +#define VOYAGER_SUBADDR_HI 0xffff + +/* the maximum size of a scan path -- used to form instructions */ +#define VOYAGER_MAX_SCAN_PATH 0x100 +/* the biggest possible register size (in bytes) */ +#define VOYAGER_MAX_REG_SIZE 4 + +/* Total number of possible modules (including submodules) */ +#define VOYAGER_MAX_MODULES 16 +/* Largest number of asics per module */ +#define VOYAGER_MAX_ASICS_PER_MODULE 7 + +/* the CAT asic of each module is always the first one */ +#define VOYAGER_CAT_ID 0 +#define VOYAGER_PSI 0x1a + +/* voyager instruction operations and registers */ +#define VOYAGER_READ_CONFIG 0x1 +#define VOYAGER_WRITE_CONFIG 0x2 +#define VOYAGER_BYPASS 0xff + +typedef struct voyager_asic +{ + __u8 asic_addr; /* ASIC address; Level 4 */ + __u8 asic_type; /* ASIC type */ + __u8 asic_id; /* ASIC id */ + __u8 jtag_id[4]; /* JTAG id */ + __u8 asic_location; /* Location within scan path; start w/ 0 */ + __u8 bit_location; /* Location within bit stream; start w/ 0 */ + __u8 ireg_length; /* Instruction register length */ + __u16 subaddr; /* Amount of sub address space */ + struct voyager_asic *next; /* Next asic in linked list */ +} voyager_asic_t; + +typedef struct voyager_module { + __u8 module_addr; /* Module address */ + __u8 scan_path_connected; /* Scan path connected */ + __u16 ee_size; /* Size of the EEPROM */ + __u16 num_asics; /* Number of Asics */ + __u16 inst_bits; /* Instruction bits in the scan path */ + __u16 largest_reg; /* Largest register in the scan path */ + __u16 smallest_reg; /* Smallest register in the scan path */ + voyager_asic_t *asic; /* First ASIC in scan path (CAT_I) */ + struct voyager_module *submodule; /* Submodule pointer */ + struct voyager_module *next; /* Next module in linked list */ +} voyager_module_t; + +typedef struct voyager_eeprom_hdr { + __u8 module_id[4]; + __u8 version_id; + __u8 config_id; + __u16 boundry_id; /* boundary scan id */ + __u16 ee_size; /* size of EEPROM */ + __u8 assembly[11]; /* assembly # */ + __u8 assembly_rev; /* assembly rev */ + __u8 tracer[4]; /* tracer number */ + __u16 assembly_cksum; /* asm checksum */ + __u16 power_consump; /* pwr requirements */ + __u16 num_asics; /* number of asics */ + __u16 bist_time; /* min. bist time */ + __u16 err_log_offset; /* error log offset */ + __u16 scan_path_offset;/* scan path offset */ + __u16 cct_offset; + __u16 log_length; /* length of err log */ + __u16 xsum_end; /* offset to end of + checksum */ + __u8 reserved[4]; + __u8 sflag; /* starting sentinal */ + __u8 part_number[13]; /* prom part number */ + __u8 version[10]; /* version number */ + __u8 signature[8]; + __u16 eeprom_chksum; + __u32 data_stamp_offset; + __u8 eflag ; /* ending sentinal */ +} __attribute__((packed)) voyager_eprom_hdr_t; + + + +#define VOYAGER_EPROM_SIZE_OFFSET ((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size))) +#define VOYAGER_XSUM_END_OFFSET 0x2a + +/* the following three definitions are for internal table layouts + * in the module EPROMs. We really only care about the IDs and + * offsets */ +typedef struct voyager_sp_table { + __u8 asic_id; + __u8 bypass_flag; + __u16 asic_data_offset; + __u16 config_data_offset; +} __attribute__((packed)) voyager_sp_table_t; + +typedef struct voyager_jtag_table { + __u8 icode[4]; + __u8 runbist[4]; + __u8 intest[4]; + __u8 samp_preld[4]; + __u8 ireg_len; +} __attribute__((packed)) voyager_jtt_t; + +typedef struct voyager_asic_data_table { + __u8 jtag_id[4]; + __u16 length_bsr; + __u16 length_bist_reg; + __u32 bist_clk; + __u16 subaddr_bits; + __u16 seed_bits; + __u16 sig_bits; + __u16 jtag_offset; +} __attribute__((packed)) voyager_at_t; + +/* Voyager Interrupt Controller (VIC) registers */ + +/* Base to add to Cross Processor Interrupts (CPIs) when triggering + * the CPU IRQ line */ +/* register defines for the WCBICs (one per processor) */ +#define VOYAGER_WCBIC0 0x41 /* bus A node P1 processor 0 */ +#define VOYAGER_WCBIC1 0x49 /* bus A node P1 processor 1 */ +#define VOYAGER_WCBIC2 0x51 /* bus A node P2 processor 0 */ +#define VOYAGER_WCBIC3 0x59 /* bus A node P2 processor 1 */ +#define VOYAGER_WCBIC4 0x61 /* bus B node P1 processor 0 */ +#define VOYAGER_WCBIC5 0x69 /* bus B node P1 processor 1 */ +#define VOYAGER_WCBIC6 0x71 /* bus B node P2 processor 0 */ +#define VOYAGER_WCBIC7 0x79 /* bus B node P2 processor 1 */ + + +/* top of memory registers */ +#define VOYAGER_WCBIC_TOM_L 0x4 +#define VOYAGER_WCBIC_TOM_H 0x5 + +/* register defines for Voyager Memory Contol (VMC) + * these are present on L4 machines only */ +#define VOYAGER_VMC1 0x81 +#define VOYAGER_VMC2 0x91 +#define VOYAGER_VMC3 0xa1 +#define VOYAGER_VMC4 0xb1 + +/* VMC Ports */ +#define VOYAGER_VMC_MEMORY_SETUP 0x9 +# define VMC_Interleaving 0x01 +# define VMC_4Way 0x02 +# define VMC_EvenCacheLines 0x04 +# define VMC_HighLine 0x08 +# define VMC_Start0_Enable 0x20 +# define VMC_Start1_Enable 0x40 +# define VMC_Vremap 0x80 +#define VOYAGER_VMC_BANK_DENSITY 0xa +# define VMC_BANK_EMPTY 0 +# define VMC_BANK_4MB 1 +# define VMC_BANK_16MB 2 +# define VMC_BANK_64MB 3 +# define VMC_BANK0_MASK 0x03 +# define VMC_BANK1_MASK 0x0C +# define VMC_BANK2_MASK 0x30 +# define VMC_BANK3_MASK 0xC0 + +/* Magellan Memory Controller (MMC) defines - present on L5 */ +#define VOYAGER_MMC_ASIC_ID 1 +/* the two memory modules corresponding to memory cards in the system */ +#define VOYAGER_MMC_MEMORY0_MODULE 0x14 +#define VOYAGER_MMC_MEMORY1_MODULE 0x15 +/* the Magellan Memory Address (MMA) defines */ +#define VOYAGER_MMA_ASIC_ID 2 + +/* Submodule number for the Quad Baseboard */ +#define VOYAGER_QUAD_BASEBOARD 1 + +/* ASIC defines for the Quad Baseboard */ +#define VOYAGER_QUAD_QDATA0 1 +#define VOYAGER_QUAD_QDATA1 2 +#define VOYAGER_QUAD_QABC 3 + +/* Useful areas in extended CMOS */ +#define VOYAGER_PROCESSOR_PRESENT_MASK 0x88a +#define VOYAGER_MEMORY_CLICKMAP 0xa23 +#define VOYAGER_DUMP_LOCATION 0xb1a + +/* SUS In Control bit - used to tell SUS that we don't need to be + * babysat anymore */ +#define VOYAGER_SUS_IN_CONTROL_PORT 0x3ff +# define VOYAGER_IN_CONTROL_FLAG 0x80 + +/* Voyager PSI defines */ +#define VOYAGER_PSI_STATUS_REG 0x08 +# define PSI_DC_FAIL 0x01 +# define PSI_MON 0x02 +# define PSI_FAULT 0x04 +# define PSI_ALARM 0x08 +# define PSI_CURRENT 0x10 +# define PSI_DVM 0x20 +# define PSI_PSCFAULT 0x40 +# define PSI_STAT_CHG 0x80 + +#define VOYAGER_PSI_SUPPLY_REG 0x8000 + /* read */ +# define PSI_FAIL_DC 0x01 +# define PSI_FAIL_AC 0x02 +# define PSI_MON_INT 0x04 +# define PSI_SWITCH_OFF 0x08 +# define PSI_HX_OFF 0x10 +# define PSI_SECURITY 0x20 +# define PSI_CMOS_BATT_LOW 0x40 +# define PSI_CMOS_BATT_FAIL 0x80 + /* write */ +# define PSI_CLR_SWITCH_OFF 0x13 +# define PSI_CLR_HX_OFF 0x14 +# define PSI_CLR_CMOS_BATT_FAIL 0x17 + +#define VOYAGER_PSI_MASK 0x8001 +# define PSI_MASK_MASK 0x10 + +#define VOYAGER_PSI_AC_FAIL_REG 0x8004 +#define AC_FAIL_STAT_CHANGE 0x80 + +#define VOYAGER_PSI_GENERAL_REG 0x8007 + /* read */ +# define PSI_SWITCH_ON 0x01 +# define PSI_SWITCH_ENABLED 0x02 +# define PSI_ALARM_ENABLED 0x08 +# define PSI_SECURE_ENABLED 0x10 +# define PSI_COLD_RESET 0x20 +# define PSI_COLD_START 0x80 + /* write */ +# define PSI_POWER_DOWN 0x10 +# define PSI_SWITCH_DISABLE 0x01 +# define PSI_SWITCH_ENABLE 0x11 +# define PSI_CLEAR 0x12 +# define PSI_ALARM_DISABLE 0x03 +# define PSI_ALARM_ENABLE 0x13 +# define PSI_CLEAR_COLD_RESET 0x05 +# define PSI_SET_COLD_RESET 0x15 +# define PSI_CLEAR_COLD_START 0x07 +# define PSI_SET_COLD_START 0x17 + + + +struct voyager_bios_info { + __u8 len; + __u8 major; + __u8 minor; + __u8 debug; + __u8 num_classes; + __u8 class_1; + __u8 class_2; +}; + +/* The following structures and definitions are for the Kernel/SUS + * interface these are needed to find out how SUS initialised any Quad + * boards in the system */ + +#define NUMBER_OF_MC_BUSSES 2 +#define SLOTS_PER_MC_BUS 8 +#define MAX_CPUS 16 /* 16 way CPU system */ +#define MAX_PROCESSOR_BOARDS 4 /* 4 processor slot system */ +#define MAX_CACHE_LEVELS 4 /* # of cache levels supported */ +#define MAX_SHARED_CPUS 4 /* # of CPUs that can share a LARC */ +#define NUMBER_OF_POS_REGS 8 + +typedef struct { + __u8 MC_Slot; + __u8 POS_Values[NUMBER_OF_POS_REGS]; +} __attribute__((packed)) MC_SlotInformation_t; + +struct QuadDescription { + __u8 Type; /* for type 0 (DYADIC or MONADIC) all fields + * will be zero except for slot */ + __u8 StructureVersion; + __u32 CPI_BaseAddress; + __u32 LARC_BankSize; + __u32 LocalMemoryStateBits; + __u8 Slot; /* Processor slots 1 - 4 */ +} __attribute__((packed)); + +struct ProcBoardInfo { + __u8 Type; + __u8 StructureVersion; + __u8 NumberOfBoards; + struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS]; +} __attribute__((packed)); + +struct CacheDescription { + __u8 Level; + __u32 TotalSize; + __u16 LineSize; + __u8 Associativity; + __u8 CacheType; + __u8 WriteType; + __u8 Number_CPUs_SharedBy; + __u8 Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS]; + +} __attribute__((packed)); + +struct CPU_Description { + __u8 CPU_HardwareId; + char *FRU_String; + __u8 NumberOfCacheLevels; + struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS]; +} __attribute__((packed)); + +struct CPU_Info { + __u8 Type; + __u8 StructureVersion; + __u8 NumberOf_CPUs; + struct CPU_Description CPU_Data[MAX_CPUS]; +} __attribute__((packed)); + + +/* + * This structure will be used by SUS and the OS. + * The assumption about this structure is that no blank space is + * packed in it by our friend the compiler. + */ +typedef struct { + __u8 Mailbox_SUS; /* Written to by SUS to give commands/response to the OS */ + __u8 Mailbox_OS; /* Written to by the OS to give commands/response to SUS */ + __u8 SUS_MailboxVersion; /* Tells the OS which iteration of the interface SUS supports */ + __u8 OS_MailboxVersion; /* Tells SUS which iteration of the interface the OS supports */ + __u32 OS_Flags; /* Flags set by the OS as info for SUS */ + __u32 SUS_Flags; /* Flags set by SUS as info for the OS */ + __u32 WatchDogPeriod; /* Watchdog period (in seconds) which the DP uses to see if the OS is dead */ + __u32 WatchDogCount; /* Updated by the OS on every tic. */ + __u32 MemoryFor_SUS_ErrorLog; /* Flat 32 bit address which tells SUS where to stuff the SUS error log on a dump */ + MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS]; /* Storage for MCA POS data */ + /* All new SECOND_PASS_INTERFACE fields added from this point */ + struct ProcBoardInfo *BoardData; + struct CPU_Info *CPU_Data; + /* All new fields must be added from this point */ +} Voyager_KernelSUS_Mbox_t; + +/* structure for finding the right memory address to send a QIC CPI to */ +struct voyager_qic_cpi { + /* Each cache line (32 bytes) can trigger a cpi. The cpi + * read/write may occur anywhere in the cache line---pick the + * middle to be safe */ + struct { + __u32 pad1[3]; + __u32 cpi; + __u32 pad2[4]; + } qic_cpi[8]; +}; + +struct voyager_status { + __u32 power_fail:1; + __u32 switch_off:1; + __u32 request_from_kernel:1; +}; + +struct voyager_psi_regs { + __u8 cat_id; + __u8 cat_dev; + __u8 cat_control; + __u8 subaddr; + __u8 dummy4; + __u8 checkbit; + __u8 subaddr_low; + __u8 subaddr_high; + __u8 intstatus; + __u8 stat1; + __u8 stat3; + __u8 fault; + __u8 tms; + __u8 gen; + __u8 sysconf; + __u8 dummy15; +}; + +struct voyager_psi_subregs { + __u8 supply; + __u8 mask; + __u8 present; + __u8 DCfail; + __u8 ACfail; + __u8 fail; + __u8 UPSfail; + __u8 genstatus; +}; + +struct voyager_psi { + struct voyager_psi_regs regs; + struct voyager_psi_subregs subregs; +}; + +struct voyager_SUS { +#define VOYAGER_DUMP_BUTTON_NMI 0x1 +#define VOYAGER_SUS_VALID 0x2 +#define VOYAGER_SYSINT_COMPLETE 0x3 + __u8 SUS_mbox; +#define VOYAGER_NO_COMMAND 0x0 +#define VOYAGER_IGNORE_DUMP 0x1 +#define VOYAGER_DO_DUMP 0x2 +#define VOYAGER_SYSINT_HANDSHAKE 0x3 +#define VOYAGER_DO_MEM_DUMP 0x4 +#define VOYAGER_SYSINT_WAS_RECOVERED 0x5 + __u8 kernel_mbox; +#define VOYAGER_MAILBOX_VERSION 0x10 + __u8 SUS_version; + __u8 kernel_version; +#define VOYAGER_OS_HAS_SYSINT 0x1 +#define VOYAGER_OS_IN_PROGRESS 0x2 +#define VOYAGER_UPDATING_WDPERIOD 0x4 + __u32 kernel_flags; +#define VOYAGER_SUS_BOOTING 0x1 +#define VOYAGER_SUS_IN_PROGRESS 0x2 + __u32 SUS_flags; + __u32 watchdog_period; + __u32 watchdog_count; + __u32 SUS_errorlog; + /* lots of system configuration stuff under here */ +}; + +/* Variables exported by voyager_smp */ +extern __u32 voyager_extended_vic_processors; +extern __u32 voyager_allowed_boot_processors; +extern __u32 voyager_quad_processors; +extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS]; +extern struct voyager_SUS *voyager_SUS; + +/* variables exported always */ +extern struct task_struct *voyager_thread; +extern int voyager_level; +extern struct voyager_status voyager_status; + +/* functions exported by the voyager and voyager_smp modules */ +extern int voyager_cat_readb(__u8 module, __u8 asic, int reg); +extern void voyager_cat_init(void); +extern void voyager_detect(struct voyager_bios_info *); +extern void voyager_trap_init(void); +extern void voyager_setup_irqs(void); +extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length); +extern void voyager_smp_intr_init(void); +extern __u8 voyager_extended_cmos_read(__u16 cmos_address); +extern void voyager_smp_dump(void); +extern void voyager_timer_interrupt(void); +extern void smp_local_timer_interrupt(void); +extern void voyager_power_off(void); +extern void smp_voyager_power_off(void *dummy); +extern void voyager_restart(void); +extern void voyager_cat_power_off(void); +extern void voyager_cat_do_common_interrupt(void); +extern void voyager_handle_nmi(void); +/* Commands for the following are */ +#define VOYAGER_PSI_READ 0 +#define VOYAGER_PSI_WRITE 1 +#define VOYAGER_PSI_SUBREAD 2 +#define VOYAGER_PSI_SUBWRITE 3 +extern void voyager_cat_psi(__u8, __u16, __u8 *); |