diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-21 23:42:32 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-21 23:42:32 (GMT) |
commit | b5153163ed580e00c67bdfecb02b2e3843817b3e (patch) | |
tree | b8c878601f07f5df8f694435857a5f3dcfd75482 /include/linux/amba | |
parent | a8cbf22559ceefdcdfac00701e8e6da7518b7e8e (diff) | |
parent | 6451d7783ba5ff24eb1a544eaa6665b890f30466 (diff) | |
download | linux-fsl-qoriq-b5153163ed580e00c67bdfecb02b2e3843817b3e.tar.xz |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
Diffstat (limited to 'include/linux/amba')
-rw-r--r-- | include/linux/amba/bus.h | 15 | ||||
-rw-r--r-- | include/linux/amba/mmci.h | 2 | ||||
-rw-r--r-- | include/linux/amba/serial.h | 11 |
3 files changed, 24 insertions, 4 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index b0c1740..c6454cc 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -20,6 +20,7 @@ #include <linux/resource.h> #define AMBA_NR_IRQS 2 +#define AMBA_CID 0xb105f00d struct clk; @@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_config(d) (((d)->periphid >> 24) & 0xff) -#define amba_rev(d) (((d)->periphid >> 20) & 0x0f) -#define amba_manf(d) (((d)->periphid >> 12) & 0xff) -#define amba_part(d) ((d)->periphid & 0xfff) +/* Some drivers don't use the struct amba_device */ +#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) +#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) +#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff) +#define AMBA_PART_BITS(a) ((a) & 0xfff) + +#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid) +#define amba_rev(d) AMBA_REV_BITS((d)->periphid) +#define amba_manf(d) AMBA_MANF_BITS((d)->periphid) +#define amba_part(d) AMBA_PART_BITS((d)->periphid) #endif diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index ca84ce7..f4ee9ac 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -24,6 +24,7 @@ * whether a card is present in the MMC slot or not * @gpio_wp: read this GPIO pin to see if the card is write protected * @gpio_cd: read this GPIO pin to detect card insertion + * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h */ @@ -35,6 +36,7 @@ struct mmci_platform_data { unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; + bool cd_invert; unsigned long capabilities; }; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index e1b634b..6021588 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -32,7 +32,9 @@ #define UART01x_RSR 0x04 /* Receive status register (Read). */ #define UART01x_ECR 0x04 /* Error clear register (Write). */ #define UART010_LCRH 0x08 /* Line control register, high byte. */ +#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ #define UART010_LCRM 0x0C /* Line control register, middle byte. */ +#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ #define UART010_LCRL 0x10 /* Line control register, low byte. */ #define UART010_CR 0x14 /* Control register. */ #define UART01x_FR 0x18 /* Flag register (Read only). */ @@ -51,6 +53,15 @@ #define UART011_MIS 0x40 /* Masked interrupt status. */ #define UART011_ICR 0x44 /* Interrupt clear register. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ +#define ST_UART011_XON1 0x54 /* XON1 register. */ +#define ST_UART011_XON2 0x58 /* XON2 register. */ +#define ST_UART011_XOFF1 0x5C /* XON1 register. */ +#define ST_UART011_XOFF2 0x60 /* XON2 register. */ +#define ST_UART011_ITCR 0x80 /* Integration test control register. */ +#define ST_UART011_ITIP 0x84 /* Integration test input register. */ +#define ST_UART011_ABCR 0x100 /* Autobaud control register. */ +#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) |