Merge tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A fairly quiet release again, a couple of relatively small new
  features and a bunch of driver specific work including yet more code
  elimination and fixes from Axel Lin.

   - Addidion of linear_min_sel for offsetting linear selectors in the
     helpers.
   - Support for continuous voltage ranges for regulators with extremely
     high resolution.
   - Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM
     vexpress."

Fix up trivial conflict (due to typo fix) in palmas-regulator.c

* tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits)
  regulator: core: Fix logic to determinate if regulator can change voltage
  regulator: s5m8767: Fix to work even if no DVS gpio present
  regulator: s5m8767: Fix to read the first DVS register.
  regulator: s5m8767: Fix to work when platform registers less regulators
  regulator: gpio-regulator: gpio_set_value should use cansleep
  regulator: gpio-regulator: Fix logical error in for() loop
  regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
  regulator: anatop: Use linear_min_sel with linear mapping
  regulator: max1586: Implement get_voltage_sel callback
  regulator: lp8788-buck: Kill _gpio_request function
  regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear
  regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode
  regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
  regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
  regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
  regulators: add regulator_can_change_voltage() function
  regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid
  regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp
  regulator: wm831x-dcdc: Ensure selected voltage falls within requested range
  regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear
  ...

6 files changed, 80 insertions, 3 deletions

diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 7671a28..ba26e99 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -76,6 +76,7 @@
 #define ARIZONA_RATE_ESTIMATOR_3                 0x154
 #define ARIZONA_RATE_ESTIMATOR_4                 0x155
 #define ARIZONA_RATE_ESTIMATOR_5                 0x156
+#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1      0x161
 #define ARIZONA_FLL1_CONTROL_1                   0x171
 #define ARIZONA_FLL1_CONTROL_2                   0x172
 #define ARIZONA_FLL1_CONTROL_3                   0x173
@@ -110,6 +111,7 @@
 #define ARIZONA_FLL2_GPIO_CLOCK                  0x1AA
 #define ARIZONA_MIC_CHARGE_PUMP_1                0x200
 #define ARIZONA_LDO1_CONTROL_1                   0x210
+#define ARIZONA_LDO1_CONTROL_2                   0x212
 #define ARIZONA_LDO2_CONTROL_1                   0x213
 #define ARIZONA_MIC_BIAS_CTRL_1                  0x218
 #define ARIZONA_MIC_BIAS_CTRL_2                  0x219
@@ -1574,6 +1576,13 @@
 #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH            5  /* SAMPLE_RATE_DETECT_D - [4:0] */
 
 /*
+ * R353 (0x161) - Dynamic Frequency Scaling 1
+ */
+#define ARIZONA_SUBSYS_MAX_FREQ                  0x0001  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT                 0  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH                 1  /* SUBSYS_MAX_FREQ */
+
+/*
  * R369 (0x171) - FLL1 Control 1
  */
 #define ARIZONA_FLL1_FREERUN                     0x0002  /* FLL1_FREERUN */
@@ -1889,6 +1898,13 @@
 #define ARIZONA_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
 
 /*
+ * R530 (0x212) - LDO1 Control 2
+ */
+#define ARIZONA_LDO1_HI_PWR                      0x0001  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_SHIFT                     0  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_WIDTH                     1  /* LDO1_HI_PWR */
+
+/*
  * R531 (0x213) - LDO2 Control 1
  */
 #define ARIZONA_LDO2_VSEL_MASK                   0x07E0  /* LDO2_VSEL - [10:5] */
diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h
index 147293b..f87a6c1 100644
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -25,8 +25,29 @@ struct da9055_pdata {
 	int gpio_base;
 
 	struct regulator_init_data *regulators[DA9055_MAX_REGULATORS];
-	bool reset_enable;		/* Enable RTC in RESET Mode */
-	enum gpio_select *gpio_rsel;	/* Select regulator set thru GPIO 1/2 */
-	enum gpio_select *gpio_ren;	/* Enable regulator thru GPIO 1/2 */
+	/* Enable RTC in RESET Mode */
+	bool reset_enable;
+	/*
+	 * GPI muxed pin to control
+	 * regulator state A/B, 0 if not available.
+	 */
+	int *gpio_ren;
+	/*
+	 * GPI muxed pin to control
+	 * regulator set, 0 if not available.
+	 */
+	int *gpio_rsel;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * that controls the regulator state, 0 if not available.
+	 */
+	enum gpio_select *reg_ren;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * controls the regulator set A/B, 0 if  not available.
+	 */
+	enum gpio_select *reg_rsel;
+	/* GPIOs to enable regulator, 0 if not available */
+	int *ena_gpio;
 };
 #endif /* __DA9055_PDATA_H */
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 830152c..6ae21bf 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -316,6 +316,7 @@ enum max8997_irq {
 #define MAX8997_NUM_GPIO	12
 struct max8997_dev {
 	struct device *dev;
+	struct max8997_platform_data *pdata;
 	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
 	struct i2c_client *rtc; /* slave addr 0x0c */
 	struct i2c_client *haptic; /* slave addr 0x90 */
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 328d8e2..1d4a4fe 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -75,6 +75,7 @@ enum max8998_regulators {
 struct max8997_regulator_data {
 	int id;
 	struct regulator_init_data *initdata;
+	struct device_node *reg_node;
 };
 
 enum max8997_muic_usb_type {
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 6bc31d8..804e280 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -24,6 +24,25 @@
 
 #include <linux/irq.h>
 
+/* TPS65090 Regulator ID */
+enum {
+	TPS65090_REGULATOR_DCDC1,
+	TPS65090_REGULATOR_DCDC2,
+	TPS65090_REGULATOR_DCDC3,
+	TPS65090_REGULATOR_FET1,
+	TPS65090_REGULATOR_FET2,
+	TPS65090_REGULATOR_FET3,
+	TPS65090_REGULATOR_FET4,
+	TPS65090_REGULATOR_FET5,
+	TPS65090_REGULATOR_FET6,
+	TPS65090_REGULATOR_FET7,
+	TPS65090_REGULATOR_LDO1,
+	TPS65090_REGULATOR_LDO2,
+
+	/* Last entry for maximum ID */
+	TPS65090_REGULATOR_MAX,
+};
+
 struct tps65090 {
 	struct mutex		lock;
 	struct device		*dev;
@@ -41,10 +60,26 @@ struct tps65090_subdev_info {
 	void		*platform_data;
 };
 
+/*
+ * struct tps65090_regulator_plat_data
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_ext_control: Enable extrenal control or not. Only available for
+ *     DCDC1, DCDC2 and DCDC3.
+ * @gpio: Gpio number if external control is enabled and controlled through
+ *     gpio.
+ */
+struct tps65090_regulator_plat_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_ext_control;
+	int gpio;
+};
+
 struct tps65090_platform_data {
 	int irq_base;
 	int num_subdevs;
 	struct tps65090_subdev_info *subdevs;
+	struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX];
 };
 
 /*
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index 2dd1231..f8da0e1 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -29,6 +29,7 @@ enum {
 	TPS6586X_ID_LDO_8,
 	TPS6586X_ID_LDO_9,
 	TPS6586X_ID_LDO_RTC,
+	TPS6586X_ID_MAX_REGULATOR,
 };
 
 enum {
@@ -79,6 +80,8 @@ struct tps6586x_platform_data {
 	int gpio_base;
 	int irq_base;
 	bool pm_off;
+
+	struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR];
 };
 
 /*