Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Most of this branch consists of updates, additions and general churn
  of the device tree source files in the kernel (arch/arm/boot/dts).
  Besides that, there are a few things to point out:

   - Lots of platform conversion on OMAP2+, with removal of old board
     files for various platforms.
   - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
     well
   - Some updates to pinctrl and other subsystems.  Most of these are
     for DT-enablement of the various platforms and acks have been
     collected"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
  ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
  ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
  ARM: dts: bcm281xx: Add card detect GPIO
  ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
  ARM: bcm281xx: Add device node for the GPIO controller
  ARM: mvebu: Add Netgear ReadyNAS 104 board
  ARM: tegra: fix Tegra114 IOMMU register address
  ARM: kirkwood: add support for OpenBlocks A7 platform
  ARM: dts: omap4-panda: add DPI pinmuxing
  ARM: dts: AM33xx: Add RNG node
  ARM: dts: AM33XX: Add hwspinlock node
  ARM: dts: OMAP5: Add hwspinlock node
  ARM: dts: OMAP4: Add hwspinlock node
  ARM: dts: use 'status' property for PCIe nodes
  ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
  ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
  ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
  ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
  ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
  ARM: mvebu: Add the core-divider clock to Armada 370/XP
  ...

1 files changed, 2 insertions, 68 deletions

diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index ca0790f..060e112 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -12,6 +12,8 @@
 #include <linux/notifier.h>
 #include <linux/err.h>
 
+#include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */
+
 /* Offset for the firmware version within the TCPM */
 #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
@@ -94,74 +96,6 @@ enum prcmu_wakeup_index {
 #define PRCMU_CLKSRC_ARMCLKFIX		0x46
 #define PRCMU_CLKSRC_HDMICLK		0x47
 
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
-	PRCMU_SGACLK,
-	PRCMU_UARTCLK,
-	PRCMU_MSP02CLK,
-	PRCMU_MSP1CLK,
-	PRCMU_I2CCLK,
-	PRCMU_SDMMCCLK,
-	PRCMU_SPARE1CLK,
-	PRCMU_SLIMCLK,
-	PRCMU_PER1CLK,
-	PRCMU_PER2CLK,
-	PRCMU_PER3CLK,
-	PRCMU_PER5CLK,
-	PRCMU_PER6CLK,
-	PRCMU_PER7CLK,
-	PRCMU_LCDCLK,
-	PRCMU_BMLCLK,
-	PRCMU_HSITXCLK,
-	PRCMU_HSIRXCLK,
-	PRCMU_HDMICLK,
-	PRCMU_APEATCLK,
-	PRCMU_APETRACECLK,
-	PRCMU_MCDECLK,
-	PRCMU_IPI2CCLK,
-	PRCMU_DSIALTCLK,
-	PRCMU_DMACLK,
-	PRCMU_B2R2CLK,
-	PRCMU_TVCLK,
-	PRCMU_SSPCLK,
-	PRCMU_RNGCLK,
-	PRCMU_UICCCLK,
-	PRCMU_PWMCLK,
-	PRCMU_IRDACLK,
-	PRCMU_IRRCCLK,
-	PRCMU_SIACLK,
-	PRCMU_SVACLK,
-	PRCMU_ACLK,
-	PRCMU_HVACLK, /* Ux540 only */
-	PRCMU_G1CLK, /* Ux540 only */
-	PRCMU_SDMMCHCLK,
-	PRCMU_CAMCLK,
-	PRCMU_BML8580CLK,
-	PRCMU_NUM_REG_CLOCKS,
-	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
-	PRCMU_CDCLK,
-	PRCMU_TIMCLK,
-	PRCMU_PLLSOC0,
-	PRCMU_PLLSOC1,
-	PRCMU_ARMSS,
-	PRCMU_PLLDDR,
-	PRCMU_PLLDSI,
-	PRCMU_DSI0CLK,
-	PRCMU_DSI1CLK,
-	PRCMU_DSI0ESCCLK,
-	PRCMU_DSI1ESCCLK,
-	PRCMU_DSI2ESCCLK,
-	/* LCD DSI PLL - Ux540 only */
-	PRCMU_PLLDSI_LCD,
-	PRCMU_DSI0CLK_LCD,
-	PRCMU_DSI1CLK_LCD,
-	PRCMU_DSI0ESCCLK_LCD,
-	PRCMU_DSI1ESCCLK_LCD,
-	PRCMU_DSI2ESCCLK_LCD,
-};
-
 /**
  * enum prcmu_wdog_id - PRCMU watchdog IDs
  * @PRCMU_WDOG_ALL: use all timers