diff options
author | Tuomas Tynkkynen <ttynkkynen@nvidia.com> | 2013-08-12 13:06:51 (GMT) |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2013-08-12 18:29:48 (GMT) |
commit | 3e635202ce40e4d7ff3fafc18db70c5d28cc6622 (patch) | |
tree | 9feaee838221202b9a87e5ae49e6f94f212f17b7 /include/linux/usb | |
parent | f5833a0bde5d7795b19f8a881278e5506ab5764b (diff) | |
download | linux-fsl-qoriq-3e635202ce40e4d7ff3fafc18db70c5d28cc6622.tar.xz |
usb: phy: tegra: Tegra30 support
The Tegra30 USB PHY is a bit different than the Tegra20 PHY:
- The EHCI controller supports the HOSTPC register extension, and some
of the fields that the PHY needs to modify (PHCD and PTS) have moved
to the new HOSTPC register.
- Some of the UTMI PLL configuration registers have moved from the USB
register space to the Clock-And-Reset controller space. In Tegra30
the clock driver is responsible for configuring the UTMI PLL.
- The USBMODE register must be explicitly written to enter host mode.
- Certain PHY parameters need to be programmed for optimal signal
quality. Support for this will be added in the next patch.
The new tegra_phy_soc_config structure is added to describe the
differences between the SoCs.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'include/linux/usb')
-rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index d3db274..d3a63c3 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -18,6 +18,24 @@ #include <linux/clk.h> #include <linux/usb/otg.h> +/* + * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers + * should be set up by clk-tegra, false if by the PHY code + * has_hostpc: true if the USB controller has the HOSTPC extension, which + * changes the location of the PHCD and PTS fields + * requires_usbmode_setup: true if the USBMODE register needs to be set to + * enter host mode + * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level + * and hsdiscon_level should be set for adequate signal quality + */ + +struct tegra_phy_soc_config { + bool utmi_pll_config_in_car_module; + bool has_hostpc; + bool requires_usbmode_setup; + bool requires_extra_tuning_parameters; +}; + struct tegra_utmip_config { u8 hssync_start_delay; u8 elastic_limit; @@ -47,6 +65,7 @@ struct tegra_usb_phy { struct regulator *vbus; enum usb_dr_mode mode; void *config; + const struct tegra_phy_soc_config *soc_config; struct usb_phy *ulpi; struct usb_phy u_phy; bool is_legacy_phy; |