diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-18 17:56:02 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-18 17:56:02 (GMT) |
commit | b061c59c27e0385e53c961d9fbd18c1c078d9823 (patch) | |
tree | 56240ef8e98e9e4712ee58aa8e6e3d51f6ab001f /include/linux | |
parent | 99f4065bac7b8c3f829334b4218a5c2e68cbe440 (diff) | |
parent | 568a60eda2e90a11bb3d7f8ef3f6800e9b60d4e5 (diff) | |
download | linux-fsl-qoriq-b061c59c27e0385e53c961d9fbd18c1c078d9823.tar.xz |
Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
spi/dw_spi: move dw_spi.h into drivers/spi
spi/dw_spi: Fix missing header
gpio/langwell: Clear edge bit before handling
gpio/langwell: Simplify demux loop
gpio/langwell: Convert irq name space
gpio/langwell: Fix broken irq_eoi change.
gpio; Make Intel chipset gpio drivers depend on x86
gpio/cs5535-gpio: Fix section mismatch
spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices
spi/davinci: Support DMA transfers larger than 65535 words
spi/davinci: Use correct length parameter to dma_map_single calls
gpio: Use __devexit at necessary places
gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio
gpio/mcp23s08: support mcp23s17 variant
of_mmc_spi: add card detect irq support
spi/omap_mcspi: catch xfers of non-multiple SPI word size
spi/omap_mcspi: Off-by-one error in finding the right divisor
gpio/pca953x: Fix wrong pointer type
spi/pl022: rid dangling labels
spi: add support for SuperH SPI
...
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/spi/dw_spi.h | 233 | ||||
-rw-r--r-- | include/linux/spi/mcp23s08.h | 15 | ||||
-rw-r--r-- | include/linux/spi/spi_oc_tiny.h | 20 |
3 files changed, 29 insertions, 239 deletions
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h deleted file mode 100644 index 6cd10f6..0000000 --- a/include/linux/spi/dw_spi.h +++ /dev/null @@ -1,233 +0,0 @@ -#ifndef DW_SPI_HEADER_H -#define DW_SPI_HEADER_H - -#include <linux/io.h> - -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 - -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) - -/* Bit fields in ISR, IMR, RISR, 7 bits */ -#define SPI_INT_TXEI (1 << 0) -#define SPI_INT_TXOI (1 << 1) -#define SPI_INT_RXUI (1 << 2) -#define SPI_INT_RXOI (1 << 3) -#define SPI_INT_RXFI (1 << 4) -#define SPI_INT_MSTI (1 << 5) - -/* TX RX interrupt level threshhold, max can be 256 */ -#define SPI_INT_THRESHOLD 32 - -enum dw_ssi_type { - SSI_MOTO_SPI = 0, - SSI_TI_SSP, - SSI_NS_MICROWIRE, -}; - -struct dw_spi_reg { - u32 ctrl0; - u32 ctrl1; - u32 ssienr; - u32 mwcr; - u32 ser; - u32 baudr; - u32 txfltr; - u32 rxfltr; - u32 txflr; - u32 rxflr; - u32 sr; - u32 imr; - u32 isr; - u32 risr; - u32 txoicr; - u32 rxoicr; - u32 rxuicr; - u32 msticr; - u32 icr; - u32 dmacr; - u32 dmatdlr; - u32 dmardlr; - u32 idr; - u32 version; - u32 dr; /* Currently oper as 32 bits, - though only low 16 bits matters */ -} __packed; - -struct dw_spi; -struct dw_spi_dma_ops { - int (*dma_init)(struct dw_spi *dws); - void (*dma_exit)(struct dw_spi *dws); - int (*dma_transfer)(struct dw_spi *dws, int cs_change); -}; - -struct dw_spi { - struct spi_master *master; - struct spi_device *cur_dev; - struct device *parent_dev; - enum dw_ssi_type type; - - void __iomem *regs; - unsigned long paddr; - u32 iolen; - int irq; - u32 fifo_len; /* depth of the FIFO buffer */ - u32 max_freq; /* max bus freq supported */ - - u16 bus_num; - u16 num_cs; /* supported slave numbers */ - - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - - /* Current message transfer state info */ - struct spi_message *cur_msg; - struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; - struct chip_data *prev_chip; - size_t len; - void *tx; - void *tx_end; - void *rx; - void *rx_end; - int dma_mapped; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - size_t rx_map_len; - size_t tx_map_len; - u8 n_bytes; /* current is a 1/2 bytes op */ - u8 max_bits_per_word; /* maxim is 16b */ - u32 dma_width; - int cs_change; - int (*write)(struct dw_spi *dws); - int (*read)(struct dw_spi *dws); - irqreturn_t (*transfer_handler)(struct dw_spi *dws); - void (*cs_control)(u32 command); - - /* Dma info */ - int dma_inited; - struct dma_chan *txchan; - struct scatterlist tx_sgl; - struct dma_chan *rxchan; - struct scatterlist rx_sgl; - int dma_chan_done; - struct device *dma_dev; - dma_addr_t dma_addr; /* phy address of the Data register */ - struct dw_spi_dma_ops *dma_ops; - void *dma_priv; /* platform relate info */ - struct pci_dev *dmac; - - /* Bus interface info */ - void *priv; -#ifdef CONFIG_DEBUG_FS - struct dentry *debugfs; -#endif -}; - -#define dw_readl(dw, name) \ - __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_writel(dw, name, val) \ - __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_readw(dw, name) \ - __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name)) -#define dw_writew(dw, name, val) \ - __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name)) - -static inline void spi_enable_chip(struct dw_spi *dws, int enable) -{ - dw_writel(dws, ssienr, (enable ? 1 : 0)); -} - -static inline void spi_set_clk(struct dw_spi *dws, u16 div) -{ - dw_writel(dws, baudr, div); -} - -static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) -{ - if (cs > dws->num_cs) - return; - - if (dws->cs_control) - dws->cs_control(1); - - dw_writel(dws, ser, 1 << cs); -} - -/* Disable IRQ bits */ -static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) -{ - u32 new_mask; - - new_mask = dw_readl(dws, imr) & ~mask; - dw_writel(dws, imr, new_mask); -} - -/* Enable IRQ bits */ -static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) -{ - u32 new_mask; - - new_mask = dw_readl(dws, imr) | mask; - dw_writel(dws, imr, new_mask); -} - -/* - * Each SPI slave device to work with dw_api controller should - * has such a structure claiming its working mode (PIO/DMA etc), - * which can be save in the "controller_data" member of the - * struct spi_device - */ -struct dw_spi_chip { - u8 poll_mode; /* 0 for contoller polling mode */ - u8 type; /* SPI/SSP/Micrwire */ - u8 enable_dma; - void (*cs_control)(u32 command); -}; - -extern int dw_spi_add_host(struct dw_spi *dws); -extern void dw_spi_remove_host(struct dw_spi *dws); -extern int dw_spi_suspend_host(struct dw_spi *dws); -extern int dw_spi_resume_host(struct dw_spi *dws); -extern void dw_spi_xfer_done(struct dw_spi *dws); - -/* platform related setup */ -extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ -#endif /* DW_SPI_HEADER_H */ diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h index 22ef107..c42cff8 100644 --- a/include/linux/spi/mcp23s08.h +++ b/include/linux/spi/mcp23s08.h @@ -2,21 +2,24 @@ /* FIXME driver should be able to handle IRQs... */ struct mcp23s08_chip_info { - bool is_present; /* true iff populated */ - u8 pullups; /* BIT(x) means enable pullup x */ + bool is_present; /* true if populated */ + unsigned pullups; /* BIT(x) means enable pullup x */ }; struct mcp23s08_platform_data { - /* Four slaves (numbered 0..3) can share one SPI chipselect, and - * will provide 8..32 GPIOs using 1..4 gpio_chip instances. + /* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI + * chipselect, each providing 1 gpio_chip instance with 8 gpios. + * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI + * chipselect, each providing 1 gpio_chip (port A + port B) with + * 16 gpios. */ - struct mcp23s08_chip_info chip[4]; + struct mcp23s08_chip_info chip[8]; /* "base" is the number of the first GPIO. Dynamic assignment is * not currently supported, and even if there are gaps in chip * addressing the GPIO numbers are sequential .. so for example * if only slaves 0 and 3 are present, their GPIOs range from - * base to base+15. + * base to base+15 (or base+31 for s17 variant). */ unsigned base; diff --git a/include/linux/spi/spi_oc_tiny.h b/include/linux/spi/spi_oc_tiny.h new file mode 100644 index 0000000..1ac529c --- /dev/null +++ b/include/linux/spi/spi_oc_tiny.h @@ -0,0 +1,20 @@ +#ifndef _LINUX_SPI_SPI_OC_TINY_H +#define _LINUX_SPI_SPI_OC_TINY_H + +/** + * struct tiny_spi_platform_data - platform data of the OpenCores tiny SPI + * @freq: input clock freq to the core. + * @baudwidth: baud rate divider width of the core. + * @gpio_cs_count: number of gpio pins used for chipselect. + * @gpio_cs: array of gpio pins used for chipselect. + * + * freq and baudwidth are used only if the divider is programmable. + */ +struct tiny_spi_platform_data { + unsigned int freq; + unsigned int baudwidth; + unsigned int gpio_cs_count; + int *gpio_cs; +}; + +#endif /* _LINUX_SPI_SPI_OC_TINY_H */ |