powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board support

T1040D4RDB/T1042D4RDB are Freescale Reference Design Board
which can support T1040/T1042 QorIQ Power
Architecture™ processor respectively

T1040D4RDB/T1042D4RDB board Overview
-------------------------------------
- SERDES Connections, 8 lanes supporting:
    	- PCI
    	- SGMII
    	- SATA 2.0
    	- QSGMII(only for T1040D4RDB)
    - DDR Controller
    	- Supports rates of up to 1600 MHz data-rate
    	- Supports one DDR4 UDIMM
    -IFC/Local Bus
    	- NAND flash: 1GB 8-bit NAND flash
    	- NOR: 128MB 16-bit NOR Flash
    - Ethernet
    	- Two on-board RGMII 10/100/1G ethernet ports.
    	- PHY #0 remains powered up during deep-sleep
    - CPLD
    - Clocks
    	- System and DDR clock (SYSCLK, “DDRCLK”)
    	- SERDES clocks
    - Power Supplies
    - USB
    	- Supports two USB 2.0 ports with integrated PHYs
    	- Two type A ports with 5V@1.5A per port.
    - SDHC
    	- SDHC/SDXC connector
    - SPI
    	- On-board 64MB SPI flash
    - I2C
    	- Devices connected: EEPROM, thermal monitor, VID controller
    - Other IO
    	- Two Serial ports
    	- ProfiBus port

    Add support for T1040/T1042D4RDB board:
    -add device tree
    -Add entry corenet_generic.c, as it is similar to other corenet platforms

Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Change-Id: I4ff308a7884107dec88fac26e91feb3e85065d3f
Reviewed-on: http://git.am.freescale.net:8181/33157
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>

0 files changed, 0 insertions, 0 deletions