diff options
author | Johannes Berg <johannes.berg@intel.com> | 2012-05-16 21:50:20 (GMT) |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2012-06-05 19:32:18 (GMT) |
commit | cc1d2806bf06ab92268343d26eb3d8d8f00f8bc9 (patch) | |
tree | b14ffa920d616470715e715df49f990bfdcf12ae /net | |
parent | 685d12a1929f274bd91497e33b4255fe164ac8ec (diff) | |
download | linux-fsl-qoriq-cc1d2806bf06ab92268343d26eb3d8d8f00f8bc9.tar.xz |
cfg80211: provide channel to join_mesh function
Just like the AP mode patch, instead of setting
the channel and then joining the mesh network,
provide the channel to join the network on to
the join_mesh() function.
Like in AP mode, you can also give the channel
to the join-mesh nl80211 command now.
Unlike AP mode, it picks a default channel if
none was given.
As libertas uses mesh mode interfaces but has
no join_mesh callback and we can't simply break
it, keep some compatibility code for that case
and configure the channel directly for it.
In the non-libertas case, where we store the
channel until join, allow setting it while the
interface is down.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net')
-rw-r--r-- | net/mac80211/cfg.c | 6 | ||||
-rw-r--r-- | net/wireless/core.h | 7 | ||||
-rw-r--r-- | net/wireless/mesh.c | 91 | ||||
-rw-r--r-- | net/wireless/nl80211.c | 43 | ||||
-rw-r--r-- | net/wireless/wext-compat.c | 12 |
5 files changed, 144 insertions, 15 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8e9d525..f47af8b 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1598,6 +1598,12 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, err = copy_mesh_setup(ifmsh, setup); if (err) return err; + + err = ieee80211_set_channel(wiphy, dev, setup->channel, + setup->channel_type); + if (err) + return err; + ieee80211_start_mesh(sdata); return 0; diff --git a/net/wireless/core.h b/net/wireless/core.h index 8523f38..1d3d241 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -303,14 +303,17 @@ extern const struct mesh_config default_mesh_config; extern const struct mesh_setup default_mesh_setup; int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf); int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf); int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev); +int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, int freq, + enum nl80211_channel_type channel_type); /* MLME */ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2749cb8..2e3b700 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -65,6 +65,9 @@ const struct mesh_config default_mesh_config = { }; const struct mesh_setup default_mesh_setup = { + /* cfg80211_join_mesh() will pick a channel if needed */ + .channel = NULL, + .channel_type = NL80211_CHAN_NO_HT, .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, .path_metric = IEEE80211_PATH_METRIC_AIRTIME, @@ -75,7 +78,7 @@ const struct mesh_setup default_mesh_setup = { int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; @@ -101,6 +104,51 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, if (!rdev->ops->join_mesh) return -EOPNOTSUPP; + if (!setup->channel) { + /* if no channel explicitly given, use preset channel */ + setup->channel = wdev->preset_chan; + setup->channel_type = wdev->preset_chantype; + } + + if (!setup->channel) { + /* if we don't have that either, use the first usable channel */ + enum ieee80211_band band; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + int i; + + sband = rdev->wiphy.bands[band]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + if (chan->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR)) + continue; + setup->channel = chan; + break; + } + + if (setup->channel) + break; + } + + /* no usable channel ... */ + if (!setup->channel) + return -EINVAL; + + setup->channel_type = NL80211_CHAN_NO_HT; + } + + if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel, + setup->channel_type)) + return -EINVAL; + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); if (!err) { memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); @@ -112,7 +160,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; @@ -125,6 +173,45 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, return err; } +int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, int freq, + enum nl80211_channel_type channel_type) +{ + struct ieee80211_channel *channel; + + /* + * Workaround for libertas (only!), it puts the interface + * into mesh mode but doesn't implement join_mesh. Instead, + * it is configured via sysfs and then joins the mesh when + * you set the channel. Note that the libertas mesh isn't + * compatible with 802.11 mesh. + */ + if (!rdev->ops->join_mesh) { + int err; + + if (!netif_running(wdev->netdev)) + return -ENETDOWN; + wdev_lock(wdev); + err = cfg80211_set_freq(rdev, wdev, freq, channel_type); + wdev_unlock(wdev); + + return err; + } + + if (wdev->mesh_id_len) + return -EBUSY; + + channel = rdev_freq_to_chan(rdev, freq, channel_type); + if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, + channel, + channel_type)) { + return -EINVAL; + } + wdev->preset_chan = channel; + wdev->preset_chantype = channel_type; + return 0; +} + void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp) { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 089a520..b22f1f8 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -921,7 +921,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (nla_put_u32(msg, i, NL80211_CMD_SET_WIPHY_NETNS)) goto nla_put_failure; } - if (dev->ops->set_channel || dev->ops->start_ap) { + if (dev->ops->set_channel || dev->ops->start_ap || + dev->ops->join_mesh) { i++; if (nla_put_u32(msg, i, NL80211_CMD_SET_CHANNEL)) goto nla_put_failure; @@ -1166,17 +1167,19 @@ static int parse_txq_params(struct nlattr *tb[], static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev) { /* - * You can only set the channel explicitly for AP and - * mesh type interfaces; all others have their channel - * managed via their respective "establish a connection" - * command (connect, join, ...) + * You can only set the channel explicitly for WDS interfaces, + * all others have their channel managed via their respective + * "establish a connection" command (connect, join, ...) + * + * For AP/GO and mesh mode, the channel can be set with the + * channel userspace API, but is only stored and passed to the + * low-level driver when the AP starts or the mesh is joined. + * This is for backward compatibility, userspace can also give + * the channel in the start-ap or join-mesh commands instead. * * Monitors are special as they are normally slaved to * whatever else is going on, so they behave as though * you tried setting the wiphy channel itself. - * - * For AP/GO modes, it's only for compatibility, you can - * also give the channel to the start-AP command. */ return !wdev || wdev->iftype == NL80211_IFTYPE_AP || @@ -1246,6 +1249,9 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev, wdev->preset_chantype = channel_type; result = 0; break; + case NL80211_IFTYPE_MESH_POINT: + result = cfg80211_set_mesh_freq(rdev, wdev, freq, channel_type); + break; default: wdev_lock(wdev); result = cfg80211_set_freq(rdev, wdev, freq, channel_type); @@ -1335,8 +1341,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) result = 0; mutex_lock(&rdev->mtx); - } else if (netif_running(netdev) && - nl80211_can_set_dev_channel(netdev->ieee80211_ptr)) + } else if (nl80211_can_set_dev_channel(netdev->ieee80211_ptr)) wdev = netdev->ieee80211_ptr; else wdev = NULL; @@ -6080,6 +6085,24 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) return err; } + if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { + enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; + + if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE] && + !nl80211_valid_channel_type(info, &channel_type)) + return -EINVAL; + + setup.channel = rdev_freq_to_chan(rdev, + nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]), + channel_type); + if (!setup.channel) + return -EINVAL; + setup.channel_type = channel_type; + } else { + /* cfg80211_join_mesh() will sort it out */ + setup.channel = NULL; + } + return cfg80211_join_mesh(rdev, dev, &setup, &cfg); } diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index b082fcc..faeb035 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -796,7 +796,6 @@ static int cfg80211_wext_siwfreq(struct net_device *dev, case NL80211_IFTYPE_ADHOC: return cfg80211_ibss_wext_siwfreq(dev, info, wextfreq, extra); case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_MESH_POINT: freq = cfg80211_wext_freq(wdev->wiphy, wextfreq); if (freq < 0) return freq; @@ -808,6 +807,17 @@ static int cfg80211_wext_siwfreq(struct net_device *dev, wdev_unlock(wdev); mutex_unlock(&rdev->devlist_mtx); return err; + case NL80211_IFTYPE_MESH_POINT: + freq = cfg80211_wext_freq(wdev->wiphy, wextfreq); + if (freq < 0) + return freq; + if (freq == 0) + return -EINVAL; + mutex_lock(&rdev->devlist_mtx); + err = cfg80211_set_mesh_freq(rdev, wdev, freq, + NL80211_CHAN_NO_HT); + mutex_unlock(&rdev->devlist_mtx); + return err; default: return -EOPNOTSUPP; } |