diff options
author | Takashi Iwai <tiwai@suse.de> | 2012-02-16 11:47:36 (GMT) |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2012-02-16 11:47:36 (GMT) |
commit | c29b3f6dd7798964d77199af4925be72a3a48349 (patch) | |
tree | 956502ed7405a4431ba981d2aab126a10c57dbea /sound/pci | |
parent | b1f58085a9c01e8ffab954fd77a45f1143edf34d (diff) | |
download | linux-fsl-qoriq-c29b3f6dd7798964d77199af4925be72a3a48349.tar.xz |
ALSA: hda/realtek - Drop model=fujitsu from ALC260 static quirks
The model works with the auto-parser as is, thus now good to drop.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci')
-rw-r--r-- | sound/pci/hda/alc260_quirks.c | 142 |
1 files changed, 0 insertions, 142 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c index 94e7a27..305341f 100644 --- a/sound/pci/hda/alc260_quirks.c +++ b/sound/pci/hda/alc260_quirks.c @@ -7,7 +7,6 @@ enum { ALC260_AUTO, ALC260_BASIC, - ALC260_FUJITSU_S702X, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -50,33 +49,6 @@ static const struct hda_input_mux alc260_capture_source = { }, }; -/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack, - * headphone jack and the internal CD lines since these are the only pins at - * which audio can appear. For flexibility, also allow the option of - * recording the mixer output on the second ADC (ADC0 doesn't have a - * connection to the mixer output). - */ -static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = { - { - .num_items = 3, - .items = { - { "Mic/Line", 0x0 }, - { "CD", 0x4 }, - { "Headphone", 0x2 }, - }, - }, - { - .num_items = 4, - .items = { - { "Mic/Line", 0x0 }, - { "CD", 0x4 }, - { "Headphone", 0x2 }, - { "Mixer", 0x5 }, - }, - }, - -}; - /* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to * the Fujitsu S702x, but jacks are marked differently. */ @@ -142,23 +114,6 @@ static const struct snd_kcontrol_new alc260_input_mixer[] = { { } /* end */ }; -/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12, - * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10. - */ -static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = { - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT), - ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), - ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), - HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT), - { } /* end */ -}; - /* * initialization verbs */ @@ -225,89 +180,6 @@ static const struct hda_verb alc260_init_verbs[] = { { } }; -/* Initialisation sequence for ALC260 as configured in Fujitsu S702x - * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD - * audio = 0x16, internal speaker = 0x10. - */ -static const struct hda_verb alc260_fujitsu_init_verbs[] = { - /* Disable all GPIOs */ - {0x01, AC_VERB_SET_GPIO_MASK, 0}, - /* Internal speaker is connected to headphone pin */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* Headphone/Line-out jack connects to Line1 pin; make it an output */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Ensure all other unused pins are disabled and muted. */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - - /* Disable digital (SPDIF) pins */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure Line1 pin widget takes its input from the OUT1 sum bus - * when acting as an output. - */ - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute Line1 pin widget output buffer since it starts as an output. - * If the pin mode is changed by the user the pin mode control will - * take care of enabling the pin's input/output buffers as needed. - * Therefore there's no need to enable the input buffer at this - * stage. - */ - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Unmute input buffer of pin widget used for Line-in (no equiv - * mixer ctrl) - */ - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting - line - * in (on mic1 pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to line in (on mic1 pin) - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; - static const struct hda_verb alc260_hp_dc7600_verbs[] = { {0x05, AC_VERB_SET_CONNECT_SEL, 0x01}, {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, @@ -515,7 +387,6 @@ static const struct hda_verb alc260_test_init_verbs[] = { */ static const char * const alc260_models[ALC260_MODEL_LAST] = { [ALC260_BASIC] = "basic", - [ALC260_FUJITSU_S702X] = "fujitsu", #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = "test", #endif @@ -526,7 +397,6 @@ static const struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X), SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC), {} }; @@ -544,18 +414,6 @@ static const struct alc_config_preset alc260_presets[] = { .channel_mode = alc260_modes, .input_mux = &alc260_capture_source, }, - [ALC260_FUJITSU_S702X] = { - .mixers = { alc260_fujitsu_mixer }, - .init_verbs = { alc260_fujitsu_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources), - .input_mux = alc260_fujitsu_capture_sources, - }, #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = { .mixers = { alc260_test_mixer }, |