diff options
-rw-r--r-- | drivers/net/bnx2x/bnx2x_hsi.h | 8 | ||||
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 45 |
2 files changed, 40 insertions, 13 deletions
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 52c190f..0692d75 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -538,7 +538,13 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ u32 fcoe_wwn_node_name_upper; u32 fcoe_wwn_node_name_lower; - u32 Reserved1[50]; /* 0x1C0 */ + u32 Reserved1[49]; /* 0x1C0 */ + + /* Enable RJ45 magjack pair swapping on 10GBase-T PHY (0=default), + 84833 only */ + u32 xgbt_phy_cfg; /* 0x284 */ + #define PORT_HW_CFG_RJ45_PAIR_SWAP_MASK 0x000000FF + #define PORT_HW_CFG_RJ45_PAIR_SWAP_SHIFT 0 u32 default_cfg; /* 0x288 */ #define PORT_HW_CFG_GPIO0_CONFIG_MASK 0x00000003 diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 144cfae..d6684b3 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -9182,11 +9182,14 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, an_1000_val); - /* set 10 speed advertisement */ + /* set 100 speed advertisement */ if (((phy->req_line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { + (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) && + (phy->supported & + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full)))) { an_10_100_val |= (1<<7); /* Enable autoneg and restart autoneg for legacy speeds */ autoneg_val |= (1<<9 | 1<<12); @@ -9197,9 +9200,12 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, } /* set 10 speed advertisement */ if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { + (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && + (phy->supported & + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full)))) { an_10_100_val |= (1<<5); autoneg_val |= (1<<9 | 1<<12); if (phy->req_duplex == DUPLEX_FULL) @@ -9208,7 +9214,10 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, } /* Only 10/100 are allowed to work in FORCE mode */ - if (phy->req_line_speed == SPEED_100) { + if ((phy->req_line_speed == SPEED_100) && + (phy->supported & + (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full))) { autoneg_val |= (1<<13); /* Enabled AUTO-MDIX when autoneg is disabled */ bnx2x_cl45_write(bp, phy, @@ -9216,7 +9225,10 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, (1<<15 | 1<<9 | 7<<0)); DP(NETIF_MSG_LINK, "Setting 100M force\n"); } - if (phy->req_line_speed == SPEED_10) { + if ((phy->req_line_speed == SPEED_10) && + (phy->supported & + (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full))) { /* Enabled AUTO-MDIX when autoneg is disabled */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, @@ -9284,11 +9296,22 @@ static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy, struct link_vars *vars) { u32 idx; + u32 pair_swap; u16 val; - u16 data = 0x01b1; + u16 data; struct bnx2x *bp = params->bp; /* Do pair swap */ + /* Check for configuration. */ + pair_swap = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].xgbt_phy_cfg)) & + PORT_HW_CFG_RJ45_PAIR_SWAP_MASK; + + if (pair_swap == 0) + return 0; + + data = (u16)pair_swap; /* Write CMD_OPEN_OVERRIDE to STATUS reg */ bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD, @@ -10787,9 +10810,7 @@ static struct bnx2x_phy phy_84833 = { .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, - .supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | + .supported = (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full | |