diff options
-rw-r--r-- | arch/arm/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/common/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/common/gic.c | 4 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/entry-macro-gic.S | 60 | ||||
-rw-r--r-- | arch/arm/include/asm/hardware/gic.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-msm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-tegra/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-ux500/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/plat-omap/Kconfig | 1 |
10 files changed, 2 insertions, 76 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d99ee9b..44789ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -278,7 +278,6 @@ config ARCH_REALVIEW select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB select NEED_MACH_MEMORY_H - select MULTI_IRQ_HANDLER help This enables support for ARM Ltd RealView boards. @@ -311,7 +310,6 @@ config ARCH_VEXPRESS select ICST select PLAT_VERSATILE select PLAT_VERSATILE_CLCD - select MULTI_IRQ_HANDLER help This enables support for the ARM Ltd Versatile Express boards. @@ -347,7 +345,6 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select USE_OF - select MULTI_IRQ_HANDLER help Support for the Calxeda Highbank SoC based boards. @@ -366,7 +363,6 @@ config ARCH_CNS3XXX select ARM_GIC select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI - select MULTI_IRQ_HANDLER help Support for Cavium Networks CNS3XXX platform. @@ -855,7 +851,6 @@ config ARCH_EXYNOS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select NEED_MACH_MEMORY_H - select MULTI_IRQ_HANDLER help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) @@ -979,7 +974,6 @@ config ARCH_ZYNQ select ARM_AMBA select ICST select USE_OF - select MULTI_IRQ_HANDLER help Support for Xilinx Zynq ARM Cortex A9 Platform endchoice diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a3beda1..a11cee5 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,5 +1,6 @@ config ARM_GIC select IRQ_DOMAIN + select MULTI_IRQ_HANDLER bool config GIC_NON_BANKED diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3c78b7c..a1feb6b 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -71,9 +71,6 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); -/* Address of GIC 0 CPU interface */ -void __iomem *gic_cpu_base_addr __read_mostly; - /* * Supported arch specific GIC irq extension. * Default make them NULL. @@ -700,7 +697,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For secondary GICs, skip over PPIs, too. */ if (gic_nr == 0) { - gic_cpu_base_addr = cpu_base; domain->hwirq_base = 16; if (irq_start > 0) irq_start = (irq_start & ~31) + 16; diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S deleted file mode 100644 index 74ebc80..0000000 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/include/asm/hardware/entry-macro-gic.S - * - * Low-level IRQ helper macros for GIC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/gic.h> - -#ifndef HAVE_GET_IRQNR_PREAMBLE - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm -#endif - -/* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] - /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - -/* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index ecf7c02..4bdfe00 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,6 @@ #include <linux/irqdomain.h> struct device_node; -extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index ba36b74..ebde97f 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -50,7 +50,6 @@ config ARCH_MSM8X60 select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP - select MULTI_IRQ_HANDLER config ARCH_MSM8960 bool "MSM8960" @@ -61,7 +60,6 @@ config ARCH_MSM8960 select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP - select MULTI_IRQ_HANDLER endchoice diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 9a6d818..22f7c97 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -37,6 +37,7 @@ config ARCH_OMAP3 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM + select MULTI_IRQ_HANDLER config ARCH_OMAP4 bool "TI OMAP4" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index a6faa50..91aff7c 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -13,7 +13,6 @@ config ARCH_TEGRA_2x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT - select MULTI_IRQ_HANDLER help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index bb2b52b..a3e0c86 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,7 +7,6 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 - select MULTI_IRQ_HANDLER menu "Ux500 SoC" diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 4a1cc58..aa59f42 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -24,7 +24,6 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER - select MULTI_IRQ_HANDLER help "Systems based on OMAP2, OMAP3 or OMAP4" |