diff options
44 files changed, 1074 insertions, 1907 deletions
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index d66e34c..284cd37 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -41,6 +41,10 @@ config NO_DMA config ZONE_DMA bool default y + +config CPU_HAS_NO_BITFIELDS + bool + config HZ int default 1000 if CLEOPATRA diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu index b004dc1..ff46383 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.nommu @@ -16,6 +16,7 @@ config GENERIC_CLOCKEVENTS config M68000 bool + select CPU_HAS_NO_BITFIELDS help The Freescale (was Motorola) 68000 CPU is the first generation of the well known M68K family of processors. The CPU core as well as @@ -25,6 +26,7 @@ config M68000 config MCPU32 bool + select CPU_HAS_NO_BITFIELDS help The Freescale (was then Motorola) CPU32 is a CPU core that is based on the 68020 processor. For the most part it is used in @@ -34,6 +36,7 @@ config COLDFIRE bool select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select CPU_HAS_NO_BITFIELDS help The Freescale ColdFire family of processors is a modern derivitive of the 68000 processor family. They are mainly targeted at embedded diff --git a/arch/m68k/Makefile_no b/arch/m68k/Makefile_no index 81652ab..844d3f1 100644 --- a/arch/m68k/Makefile_no +++ b/arch/m68k/Makefile_no @@ -13,7 +13,7 @@ platform-$(CONFIG_M68EZ328) := 68EZ328 platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 -platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M5206e) := 5206 platform-$(CONFIG_M520x) := 520x platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index 03ae3d1..307a573 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -169,18 +169,18 @@ static inline int atomic_add_negative(int i, atomic_t *v) char c; __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v) - : "id" (i)); + : ASM_DI (i)); return c != 0; } static inline void atomic_clear_mask(unsigned long mask, unsigned long *v) { - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); + __asm__ __volatile__("andl %1,%0" : "+m" (*v) : ASM_DI (~(mask))); } static inline void atomic_set_mask(unsigned long mask, unsigned long *v) { - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); + __asm__ __volatile__("orl %1,%0" : "+m" (*v) : ASM_DI (mask)); } static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h index ce163ab..c6baa91 100644 --- a/arch/m68k/include/asm/bitops.h +++ b/arch/m68k/include/asm/bitops.h @@ -1,5 +1,530 @@ -#ifdef __uClinux__ -#include "bitops_no.h" +#ifndef _M68K_BITOPS_H +#define _M68K_BITOPS_H +/* + * Copyright 1992, Linus Torvalds. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <linux/compiler.h> + +/* + * Bit access functions vary across the ColdFire and 68k families. + * So we will break them out here, and then macro in the ones we want. + * + * ColdFire - supports standard bset/bclr/bchg with register operand only + * 68000 - supports standard bset/bclr/bchg with memory operand + * >= 68020 - also supports the bfset/bfclr/bfchg instructions + * + * Although it is possible to use only the bset/bclr/bchg with register + * operands on all platforms you end up with larger generated code. + * So we use the best form possible on a given platform. + */ + +static inline void bset_reg_set_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bset %1,(%0)" + : + : "a" (p), "di" (nr & 7) + : "memory"); +} + +static inline void bset_mem_set_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bset %1,%0" + : "+m" (*p) + : "di" (nr & 7)); +} + +static inline void bfset_mem_set_bit(int nr, volatile unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfset %1{%0:#1}" + : + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); +} + +#if defined(CONFIG_COLDFIRE) +#define set_bit(nr, vaddr) bset_reg_set_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define set_bit(nr, vaddr) bset_mem_set_bit(nr, vaddr) +#else +#define set_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bset_mem_set_bit(nr, vaddr) : \ + bfset_mem_set_bit(nr, vaddr)) +#endif + +#define __set_bit(nr, vaddr) set_bit(nr, vaddr) + + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static inline void bclr_reg_clear_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bclr %1,(%0)" + : + : "a" (p), "di" (nr & 7) + : "memory"); +} + +static inline void bclr_mem_clear_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bclr %1,%0" + : "+m" (*p) + : "di" (nr & 7)); +} + +static inline void bfclr_mem_clear_bit(int nr, volatile unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfclr %1{%0:#1}" + : + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); +} + +#if defined(CONFIG_COLDFIRE) +#define clear_bit(nr, vaddr) bclr_reg_clear_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define clear_bit(nr, vaddr) bclr_mem_clear_bit(nr, vaddr) +#else +#define clear_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bclr_mem_clear_bit(nr, vaddr) : \ + bfclr_mem_clear_bit(nr, vaddr)) +#endif + +#define __clear_bit(nr, vaddr) clear_bit(nr, vaddr) + + +static inline void bchg_reg_change_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bchg %1,(%0)" + : + : "a" (p), "di" (nr & 7) + : "memory"); +} + +static inline void bchg_mem_change_bit(int nr, volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + + __asm__ __volatile__ ("bchg %1,%0" + : "+m" (*p) + : "di" (nr & 7)); +} + +static inline void bfchg_mem_change_bit(int nr, volatile unsigned long *vaddr) +{ + __asm__ __volatile__ ("bfchg %1{%0:#1}" + : + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); +} + +#if defined(CONFIG_COLDFIRE) +#define change_bit(nr, vaddr) bchg_reg_change_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define change_bit(nr, vaddr) bchg_mem_change_bit(nr, vaddr) +#else +#define change_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bchg_mem_change_bit(nr, vaddr) : \ + bfchg_mem_change_bit(nr, vaddr)) +#endif + +#define __change_bit(nr, vaddr) change_bit(nr, vaddr) + + +static inline int test_bit(int nr, const unsigned long *vaddr) +{ + return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; +} + + +static inline int bset_reg_test_and_set_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bset %2,(%1); sne %0" + : "=d" (retval) + : "a" (p), "di" (nr & 7) + : "memory"); + return retval; +} + +static inline int bset_mem_test_and_set_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bset %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + return retval; +} + +static inline int bfset_mem_test_and_set_bit(int nr, + volatile unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0" + : "=d" (retval) + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); + return retval; +} + +#if defined(CONFIG_COLDFIRE) +#define test_and_set_bit(nr, vaddr) bset_reg_test_and_set_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define test_and_set_bit(nr, vaddr) bset_mem_test_and_set_bit(nr, vaddr) +#else +#define test_and_set_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bset_mem_test_and_set_bit(nr, vaddr) : \ + bfset_mem_test_and_set_bit(nr, vaddr)) +#endif + +#define __test_and_set_bit(nr, vaddr) test_and_set_bit(nr, vaddr) + + +static inline int bclr_reg_test_and_clear_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bclr %2,(%1); sne %0" + : "=d" (retval) + : "a" (p), "di" (nr & 7) + : "memory"); + return retval; +} + +static inline int bclr_mem_test_and_clear_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bclr %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + return retval; +} + +static inline int bfclr_mem_test_and_clear_bit(int nr, + volatile unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0" + : "=d" (retval) + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); + return retval; +} + +#if defined(CONFIG_COLDFIRE) +#define test_and_clear_bit(nr, vaddr) bclr_reg_test_and_clear_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define test_and_clear_bit(nr, vaddr) bclr_mem_test_and_clear_bit(nr, vaddr) +#else +#define test_and_clear_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bclr_mem_test_and_clear_bit(nr, vaddr) : \ + bfclr_mem_test_and_clear_bit(nr, vaddr)) +#endif + +#define __test_and_clear_bit(nr, vaddr) test_and_clear_bit(nr, vaddr) + + +static inline int bchg_reg_test_and_change_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bchg %2,(%1); sne %0" + : "=d" (retval) + : "a" (p), "di" (nr & 7) + : "memory"); + return retval; +} + +static inline int bchg_mem_test_and_change_bit(int nr, + volatile unsigned long *vaddr) +{ + char *p = (char *)vaddr + (nr ^ 31) / 8; + char retval; + + __asm__ __volatile__ ("bchg %2,%1; sne %0" + : "=d" (retval), "+m" (*p) + : "di" (nr & 7)); + return retval; +} + +static inline int bfchg_mem_test_and_change_bit(int nr, + volatile unsigned long *vaddr) +{ + char retval; + + __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0" + : "=d" (retval) + : "d" (nr ^ 31), "o" (*vaddr) + : "memory"); + return retval; +} + +#if defined(CONFIG_COLDFIRE) +#define test_and_change_bit(nr, vaddr) bchg_reg_test_and_change_bit(nr, vaddr) +#elif defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#define test_and_change_bit(nr, vaddr) bchg_mem_test_and_change_bit(nr, vaddr) +#else +#define test_and_change_bit(nr, vaddr) (__builtin_constant_p(nr) ? \ + bchg_mem_test_and_change_bit(nr, vaddr) : \ + bfchg_mem_test_and_change_bit(nr, vaddr)) +#endif + +#define __test_and_change_bit(nr, vaddr) test_and_change_bit(nr, vaddr) + + +/* + * The true 68020 and more advanced processors support the "bfffo" + * instruction for finding bits. ColdFire and simple 68000 parts + * (including CPU32) do not support this. They simply use the generic + * functions. + */ +#if defined(CONFIG_CPU_HAS_NO_BITFIELDS) +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/ffz.h> +#else + +static inline int find_first_zero_bit(const unsigned long *vaddr, + unsigned size) +{ + const unsigned long *p = vaddr; + int res = 32; + unsigned int words; + unsigned long num; + + if (!size) + return 0; + + words = (size + 31) >> 5; + while (!(num = ~*p++)) { + if (!--words) + goto out; + } + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + res ^= 31; +out: + res += ((long)p - (long)vaddr - 4) * 8; + return res < size ? res : size; +} +#define find_first_zero_bit find_first_zero_bit + +static inline int find_next_zero_bit(const unsigned long *vaddr, int size, + int offset) +{ + const unsigned long *p = vaddr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + unsigned long num = ~*p++ & (~0UL << bit); + offset -= bit; + + /* Look for zero in first longword */ + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + if (res < 32) { + offset += res ^ 31; + return offset < size ? offset : size; + } + offset += 32; + + if (offset >= size) + return size; + } + /* No zero yet, search remaining full bytes for a zero */ + return offset + find_first_zero_bit(p, size - offset); +} +#define find_next_zero_bit find_next_zero_bit + +static inline int find_first_bit(const unsigned long *vaddr, unsigned size) +{ + const unsigned long *p = vaddr; + int res = 32; + unsigned int words; + unsigned long num; + + if (!size) + return 0; + + words = (size + 31) >> 5; + while (!(num = *p++)) { + if (!--words) + goto out; + } + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + res ^= 31; +out: + res += ((long)p - (long)vaddr - 4) * 8; + return res < size ? res : size; +} +#define find_first_bit find_first_bit + +static inline int find_next_bit(const unsigned long *vaddr, int size, + int offset) +{ + const unsigned long *p = vaddr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + unsigned long num = *p++ & (~0UL << bit); + offset -= bit; + + /* Look for one in first longword */ + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (num & -num)); + if (res < 32) { + offset += res ^ 31; + return offset < size ? offset : size; + } + offset += 32; + + if (offset >= size) + return size; + } + /* No one yet, search remaining full bytes for a one */ + return offset + find_first_bit(p, size - offset); +} +#define find_next_bit find_next_bit + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static inline unsigned long ffz(unsigned long word) +{ + int res; + + __asm__ __volatile__ ("bfffo %1{#0,#0},%0" + : "=d" (res) : "d" (~word & -~word)); + return res ^ 31; +} + +#endif + +#ifdef __KERNEL__ + +#if defined(CONFIG_CPU_HAS_NO_BITFIELDS) + +/* + * The newer ColdFire family members support a "bitrev" instruction + * and we can use that to implement a fast ffs. Older Coldfire parts, + * and normal 68000 parts don't have anything special, so we use the + * generic functions for those. + */ +#if (defined(__mcfisaaplus__) || defined(__mcfisac__)) && \ + !defined(CONFIG_M68000) && !defined(CONFIG_MCPU32) +static inline int __ffs(int x) +{ + __asm__ __volatile__ ("bitrev %0; ff1 %0" + : "=d" (x) + : "0" (x)); + return x; +} + +static inline int ffs(int x) +{ + if (!x) + return 0; + return __ffs(x) + 1; +} + +#else +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/__ffs.h> +#endif + +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> + #else -#include "bitops_mm.h" + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int x) +{ + int cnt; + + __asm__ ("bfffo %1{#0:#0},%0" + : "=d" (cnt) + : "dm" (x & -x)); + return 32 - cnt; +} +#define __ffs(x) (ffs(x) - 1) + +/* + * fls: find last bit set. + */ +static inline int fls(int x) +{ + int cnt; + + __asm__ ("bfffo %1{#0,#0},%0" + : "=d" (cnt) + : "dm" (x)); + return 32 - cnt; +} + +static inline int __fls(int x) +{ + return fls(x) - 1; +} + #endif + +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/le.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> +#endif /* __KERNEL__ */ + +#endif /* _M68K_BITOPS_H */ diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h deleted file mode 100644 index 89cf5b8..0000000 --- a/arch/m68k/include/asm/bitops_mm.h +++ /dev/null @@ -1,501 +0,0 @@ -#ifndef _M68K_BITOPS_H -#define _M68K_BITOPS_H -/* - * Copyright 1992, Linus Torvalds. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <linux/compiler.h> - -/* - * Require 68020 or better. - * - * They use the standard big-endian m680x0 bit ordering. - */ - -#define test_and_set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_set_bit(nr, vaddr) : \ - __generic_test_and_set_bit(nr, vaddr)) - -#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr) - -static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_set_bit(nr, vaddr) : \ - __generic_set_bit(nr, vaddr)) - -#define __set_bit(nr,vaddr) set_bit(nr,vaddr) - -static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bset %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfset %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_clear_bit(nr, vaddr) : \ - __generic_test_and_clear_bit(nr, vaddr)) - -#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr) - -static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#define clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_clear_bit(nr, vaddr) : \ - __generic_clear_bit(nr, vaddr)) -#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr) - -static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfclr %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_change_bit(nr, vaddr) : \ - __generic_test_and_change_bit(nr, vaddr)) - -#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr) -#define __change_bit(nr,vaddr) change_bit(nr,vaddr) - -static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_change_bit(nr, vaddr) : \ - __generic_change_bit(nr, vaddr)) - -static inline void __constant_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_change_bit(int nr, unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfchg %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -static inline int test_bit(int nr, const unsigned long *vaddr) -{ - return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; -} - -static inline int find_first_zero_bit(const unsigned long *vaddr, - unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned int words; - unsigned long num; - - if (!size) - return 0; - - words = (size + 31) >> 5; - while (!(num = ~*p++)) { - if (!--words) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - res += ((long)p - (long)vaddr - 4) * 8; - return res < size ? res : size; -} -#define find_first_zero_bit find_first_zero_bit - -static inline int find_next_zero_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = ~*p++ & (~0UL << bit); - offset -= bit; - - /* Look for zero in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) { - offset += res ^ 31; - return offset < size ? offset : size; - } - offset += 32; - - if (offset >= size) - return size; - } - /* No zero yet, search remaining full bytes for a zero */ - return offset + find_first_zero_bit(p, size - offset); -} -#define find_next_zero_bit find_next_zero_bit - -static inline int find_first_bit(const unsigned long *vaddr, unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned int words; - unsigned long num; - - if (!size) - return 0; - - words = (size + 31) >> 5; - while (!(num = *p++)) { - if (!--words) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - res += ((long)p - (long)vaddr - 4) * 8; - return res < size ? res : size; -} -#define find_first_bit find_first_bit - -static inline int find_next_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = *p++ & (~0UL << bit); - offset -= bit; - - /* Look for one in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) { - offset += res ^ 31; - return offset < size ? offset : size; - } - offset += 32; - - if (offset >= size) - return size; - } - /* No one yet, search remaining full bytes for a one */ - return offset + find_first_bit(p, size - offset); -} -#define find_next_bit find_next_bit - -/* - * ffz = Find First Zero in word. Undefined if no zero exists, - * so code should check against ~0UL first.. - */ -static inline unsigned long ffz(unsigned long word) -{ - int res; - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (~word & -~word)); - return res ^ 31; -} - -#ifdef __KERNEL__ - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -static inline int ffs(int x) -{ - int cnt; - - asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x)); - - return 32 - cnt; -} -#define __ffs(x) (ffs(x) - 1) - -/* - * fls: find last bit set. - */ - -static inline int fls(int x) -{ - int cnt; - - asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x)); - - return 32 - cnt; -} - -static inline int __fls(int x) -{ - return fls(x) - 1; -} - -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -/* Bitmap functions for the little endian bitmap. */ - -static inline void __set_bit_le(int nr, void *addr) -{ - __set_bit(nr ^ 24, addr); -} - -static inline void __clear_bit_le(int nr, void *addr) -{ - __clear_bit(nr ^ 24, addr); -} - -static inline int __test_and_set_bit_le(int nr, void *addr) -{ - return __test_and_set_bit(nr ^ 24, addr); -} - -static inline int test_and_set_bit_le(int nr, void *addr) -{ - return test_and_set_bit(nr ^ 24, addr); -} - -static inline int __test_and_clear_bit_le(int nr, void *addr) -{ - return __test_and_clear_bit(nr ^ 24, addr); -} - -static inline int test_and_clear_bit_le(int nr, void *addr) -{ - return test_and_clear_bit(nr ^ 24, addr); -} - -static inline int test_bit_le(int nr, const void *vaddr) -{ - const unsigned char *p = vaddr; - return (p[nr >> 3] & (1U << (nr & 7))) != 0; -} - -static inline int find_first_zero_bit_le(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res = 0; - unsigned int words; - - if (!size) - return 0; - - words = (size >> 5) + ((size & 31) > 0); - while (*p++ == ~0UL) { - if (--words == 0) - goto out; - } - - --p; - for (res = 0; res < 32; res++) - if (!test_bit_le(res, p)) - break; -out: - res += (p - addr) * 32; - return res < size ? res : size; -} -#define find_first_zero_bit_le find_first_zero_bit_le - -static inline unsigned long find_next_zero_bit_le(const void *addr, - unsigned long size, unsigned long offset) -{ - const unsigned long *p = addr; - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - p += offset >> 5; - - if (bit) { - offset -= bit; - /* Look for zero in first longword */ - for (res = bit; res < 32; res++) - if (!test_bit_le(res, p)) { - offset += res; - return offset < size ? offset : size; - } - p++; - offset += 32; - - if (offset >= size) - return size; - } - /* No zero yet, search remaining full bytes for a zero */ - return offset + find_first_zero_bit_le(p, size - offset); -} -#define find_next_zero_bit_le find_next_zero_bit_le - -static inline int find_first_bit_le(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res = 0; - unsigned int words; - - if (!size) - return 0; - - words = (size >> 5) + ((size & 31) > 0); - while (*p++ == 0UL) { - if (--words == 0) - goto out; - } - - --p; - for (res = 0; res < 32; res++) - if (test_bit_le(res, p)) - break; -out: - res += (p - addr) * 32; - return res < size ? res : size; -} -#define find_first_bit_le find_first_bit_le - -static inline unsigned long find_next_bit_le(const void *addr, - unsigned long size, unsigned long offset) -{ - const unsigned long *p = addr; - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - p += offset >> 5; - - if (bit) { - offset -= bit; - /* Look for one in first longword */ - for (res = bit; res < 32; res++) - if (test_bit_le(res, p)) { - offset += res; - return offset < size ? offset : size; - } - p++; - offset += 32; - - if (offset >= size) - return size; - } - /* No set bit yet, search remaining full bytes for a set bit */ - return offset + find_first_bit_le(p, size - offset); -} -#define find_next_bit_le find_next_bit_le - -/* Bitmap functions for the ext2 filesystem. */ - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_bit_le(nr, addr) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_bit_le(nr, addr) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_BITOPS_H */ diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h deleted file mode 100644 index 72e85ac..0000000 --- a/arch/m68k/include/asm/bitops_no.h +++ /dev/null @@ -1,333 +0,0 @@ -#ifndef _M68KNOMMU_BITOPS_H -#define _M68KNOMMU_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline int ffs(unsigned int val) -{ - if (!val) - return 0; - - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - val++; - return val; -} - -static inline int __ffs(unsigned int val) -{ - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#else -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/__ffs.h> -#endif - -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/ffz.h> - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bset %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __set_bit(nr, addr) set_bit(nr, addr) - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -static __inline__ void clear_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __clear_bit(nr, addr) clear_bit(nr, addr) - -static __inline__ void change_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __change_bit(nr, addr) change_bit(nr, addr) - -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) - -/* - * This routine doesn't need to be atomic. - */ -static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) - -static inline void __set_bit_le(int nr, void *addr) -{ - __set_bit(nr ^ BITOP_LE_SWIZZLE, addr); -} - -static inline void __clear_bit_le(int nr, void *addr) -{ - __clear_bit(nr ^ BITOP_LE_SWIZZLE, addr); -} - -static inline int __test_and_set_bit_le(int nr, volatile void *addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -static inline int __test_and_clear_bit_le(int nr, volatile void *addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#include <asm-generic/bitops/ext2-atomic.h> - -static inline int test_bit_le(int nr, const volatile void *addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("btst %2,%1; sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define find_first_zero_bit_le(addr, size) \ - find_next_zero_bit_le((addr), (size), 0) - -static inline unsigned long find_next_zero_bit_le(void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); - unsigned long result = offset & ~31UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if(offset) { - /* We hold the little endian value in tmp, but then the - * shift is illegal. So we could keep a big endian value - * in tmp, like this: - * - * tmp = __swab32(*(p++)); - * tmp |= ~0UL >> (32-offset); - * - * but this would decrease performance, so we change the - * shift: - */ - tmp = *(p++); - tmp |= __swab32(~0UL >> (32-offset)); - if(size < 32) - goto found_first; - if(~tmp) - goto found_middle; - size -= 32; - result += 32; - } - while(size & ~31UL) { - if(~(tmp = *(p++))) - goto found_middle; - result += 32; - size -= 32; - } - if(!size) - return result; - tmp = *p; - -found_first: - /* tmp is little endian, so we would have to swab the shift, - * see above. But then we have to swab tmp below for ffz, so - * we might as well do this here. - */ - return result + ffz(__swab32(tmp) | (~0UL << size)); -found_middle: - return result + ffz(__swab32(tmp)); -} -#define find_next_zero_bit_le find_next_zero_bit_le - -extern unsigned long find_next_bit_le(const void *addr, - unsigned long size, unsigned long offset); - -#endif /* __KERNEL__ */ - -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> - -#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h index d2598e3..9c09bec 100644 --- a/arch/m68k/include/asm/delay.h +++ b/arch/m68k/include/asm/delay.h @@ -1,5 +1,96 @@ -#ifdef __uClinux__ -#include "delay_no.h" +#ifndef _M68K_DELAY_H +#define _M68K_DELAY_H + +#include <asm/param.h> + +/* + * Copyright (C) 1994 Hamish Macdonald + * Copyright (C) 2004 Greg Ungerer <gerg@uclinux.com> + * + * Delay routines, using a pre-computed "loops_per_jiffy" value. + */ + +#if defined(CONFIG_COLDFIRE) +/* + * The ColdFire runs the delay loop at significantly different speeds + * depending upon long word alignment or not. We'll pad it to + * long word alignment which is the faster version. + * The 0x4a8e is of course a 'tstl %fp' instruction. This is better + * than using a NOP (0x4e71) instruction because it executes in one + * cycle not three and doesn't allow for an arbitrary delay waiting + * for bus cycles to finish. Also fp/a6 isn't likely to cause a + * stall waiting for the register to become valid if such is added + * to the coldfire at some stage. + */ +#define DELAY_ALIGN ".balignw 4, 0x4a8e\n\t" #else -#include "delay_mm.h" +/* + * No instruction alignment required for other m68k types. + */ +#define DELAY_ALIGN #endif + +static inline void __delay(unsigned long loops) +{ + __asm__ __volatile__ ( + DELAY_ALIGN + "1: subql #1,%0\n\t" + "jcc 1b" + : "=d" (loops) + : "0" (loops)); +} + +extern void __bad_udelay(void); + + +#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +/* + * The simpler m68k and ColdFire processors do not have a 32*32->64 + * multiply instruction. So we need to handle them a little differently. + * We use a bit of shifting and a single 32*32->32 multiply to get close. + * This is a macro so that the const version can factor out the first + * multiply and shift. + */ +#define HZSCALE (268435456 / (1000000 / HZ)) + +#define __const_udelay(u) \ + __delay(((((u) * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6) + +#else + +static inline void __xdelay(unsigned long xloops) +{ + unsigned long tmp; + + __asm__ ("mulul %2,%0:%1" + : "=d" (xloops), "=d" (tmp) + : "d" (xloops), "1" (loops_per_jiffy)); + __delay(xloops * HZ); +} + +/* + * The definition of __const_udelay is specifically made a macro so that + * the const factor (4295 = 2**32 / 1000000) can be optimized out when + * the delay is a const. + */ +#define __const_udelay(n) (__xdelay((n) * 4295)) + +#endif + +static inline void __udelay(unsigned long usecs) +{ + __const_udelay(usecs); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay(n)) : __udelay(n)) + + +#endif /* defined(_M68K_DELAY_H) */ diff --git a/arch/m68k/include/asm/delay_mm.h b/arch/m68k/include/asm/delay_mm.h deleted file mode 100644 index 5ed9285..0000000 --- a/arch/m68k/include/asm/delay_mm.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _M68K_DELAY_H -#define _M68K_DELAY_H - -#include <asm/param.h> - -/* - * Copyright (C) 1994 Hamish Macdonald - * - * Delay routines, using a pre-computed "loops_per_jiffy" value. - */ - -static inline void __delay(unsigned long loops) -{ - __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" - : "=d" (loops) : "0" (loops)); -} - -extern void __bad_udelay(void); - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -static inline void __const_udelay(unsigned long xloops) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1" - : "=d" (xloops), "=d" (tmp) - : "d" (xloops), "1" (loops_per_jiffy)); - __delay(xloops * HZ); -} - -static inline void __udelay(unsigned long usecs) -{ - __const_udelay(usecs * 4295); /* 2**32 / 1000000 */ -} - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \ - __udelay(n)) - -static inline unsigned long muldiv(unsigned long a, unsigned long b, - unsigned long c) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" - : "=d" (tmp), "=d" (a) - : "d" (b), "d" (c), "1" (a)); - return a; -} - -#endif /* defined(_M68K_DELAY_H) */ diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h deleted file mode 100644 index c3a0edc..0000000 --- a/arch/m68k/include/asm/delay_no.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _M68KNOMMU_DELAY_H -#define _M68KNOMMU_DELAY_H - -/* - * Copyright (C) 1994 Hamish Macdonald - * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com> - */ - -#include <asm/param.h> - -static inline void __delay(unsigned long loops) -{ -#if defined(CONFIG_COLDFIRE) - /* The coldfire runs this loop at significantly different speeds - * depending upon long word alignment or not. We'll pad it to - * long word alignment which is the faster version. - * The 0x4a8e is of course a 'tstl %fp' instruction. This is better - * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitrary delay waiting - * for bus cycles to finish. Also fp/a6 isn't likely to cause a - * stall waiting for the register to become valid if such is added - * to the coldfire at some stage. - */ - __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" - "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#else - __asm__ __volatile__ ( "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#endif -} - -/* - * Ideally we use a 32*32->64 multiply to calculate the number of - * loop iterations, but the older standard 68k and ColdFire do not - * have this instruction. So for them we have a clsoe approximation - * loop using 32*32->32 multiplies only. This calculation based on - * the ARM version of delay. - * - * We want to implement: - * - * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 - */ - -#define HZSCALE (268435456 / (1000000/HZ)) - -extern unsigned long loops_per_jiffy; - -static inline void _udelay(unsigned long usecs) -{ -#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ - defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ - defined(CONFIG_COLDFIRE) - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); -#else - unsigned long tmp; - - usecs *= 4295; /* 2**32 / 1000000 */ - __asm__ ("mulul %2,%0:%1" - : "=d" (usecs), "=d" (tmp) - : "d" (usecs), "1" (loops_per_jiffy*HZ)); - __delay(usecs); -#endif -} - -/* - * Moved the udelay() function into library code, no longer inlined. - * I had to change the algorithm because we are overflowing now on - * the faster ColdFire parts. The code is a little bigger, so it makes - * sense to library it. - */ -extern void udelay(unsigned long usecs); - -#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h index 627d69b..68611e3 100644 --- a/arch/m68k/include/asm/entry_no.h +++ b/arch/m68k/include/asm/entry_no.h @@ -96,11 +96,11 @@ .endm .macro RDUSP - movel sw_usp,%a2 + movel sw_usp,%a3 .endm .macro WRUSP - movel %a0,sw_usp + movel %a3,sw_usp .endm #else /* !CONFIG_COLDFIRE_SW_A7 */ @@ -127,13 +127,13 @@ .endm .macro RDUSP - /*move %usp,%a2*/ - .word 0x4e6a + /*move %usp,%a3*/ + .word 0x4e6b .endm .macro WRUSP - /*move %a0,%usp*/ - .word 0x4e60 + /*move %a3,%usp*/ + .word 0x4e63 .endm #endif /* !CONFIG_COLDFIRE_SW_A7 */ diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h index 56d0d5d..870e534 100644 --- a/arch/m68k/include/asm/hardirq.h +++ b/arch/m68k/include/asm/hardirq.h @@ -1,5 +1,34 @@ -#ifdef __uClinux__ -#include "hardirq_no.h" +#ifndef __M68K_HARDIRQ_H +#define __M68K_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/cache.h> +#include <asm/irq.h> + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#ifdef CONFIG_MMU + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + #else -#include "hardirq_mm.h" + +#include <asm-generic/hardirq.h> + +#endif /* !CONFIG_MMU */ + #endif diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h deleted file mode 100644 index 394ee94..0000000 --- a/arch/m68k/include/asm/hardirq_mm.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include <linux/threads.h> -#include <linux/cache.h> - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -#endif diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h deleted file mode 100644 index b44b14b..0000000 --- a/arch/m68k/include/asm/hardirq_no.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include <asm/irq.h> - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -#include <asm-generic/hardirq.h> - -#endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 907eff1..69ed0d74 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -33,15 +33,6 @@ #include <linux/spinlock_types.h> /* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -/* * Interrupt source definitions * General interrupt sources are the level 1-7. * Adding an interrupt service routine for one of these sources @@ -131,4 +122,6 @@ asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); #define irq_canonicalize(irq) (irq) #endif /* CONFIG_MMU */ +asmlinkage void do_IRQ(int irq, struct pt_regs *regs); + #endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h index 415d548..789f3b2 100644 --- a/arch/m68k/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep.h @@ -40,6 +40,5 @@ extern unsigned long hw_timer_offset(void); extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); extern void config_BSP(char *command, int len); -extern void do_IRQ(int irq, struct pt_regs *fp); #endif /* _M68K_MACHDEP_H */ diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h index 5f21e11..edffe66 100644 --- a/arch/m68k/include/asm/module.h +++ b/arch/m68k/include/asm/module.h @@ -1,46 +1,41 @@ #ifndef _ASM_M68K_MODULE_H #define _ASM_M68K_MODULE_H -#ifdef CONFIG_MMU +enum m68k_fixup_type { + m68k_fixup_memoffset, + m68k_fixup_vnode_shift, +}; + +struct m68k_fixup_info { + enum m68k_fixup_type type; + void *addr; +}; struct mod_arch_specific { struct m68k_fixup_info *fixup_start, *fixup_end; }; +#ifdef CONFIG_MMU + #define MODULE_ARCH_INIT { \ .fixup_start = __start_fixup, \ .fixup_end = __stop_fixup, \ } -enum m68k_fixup_type { - m68k_fixup_memoffset, - m68k_fixup_vnode_shift, -}; - -struct m68k_fixup_info { - enum m68k_fixup_type type; - void *addr; -}; - #define m68k_fixup(type, addr) \ " .section \".m68k_fixup\",\"aw\"\n" \ " .long " #type "," #addr "\n" \ " .previous\n" +#endif /* CONFIG_MMU */ + extern struct m68k_fixup_info __start_fixup[], __stop_fixup[]; struct module; extern void module_fixup(struct module *mod, struct m68k_fixup_info *start, struct m68k_fixup_info *end); -#else - -struct mod_arch_specific { -}; - -#endif /* CONFIG_MMU */ - #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define Elf_Ehdr Elf32_Ehdr diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h index 5bc09c7..60e8866 100644 --- a/arch/m68k/include/asm/signal.h +++ b/arch/m68k/include/asm/signal.h @@ -150,7 +150,7 @@ typedef struct sigaltstack { #ifdef __KERNEL__ #include <asm/sigcontext.h> -#ifndef __uClinux__ +#ifndef CONFIG_CPU_HAS_NO_BITFIELDS #define __HAVE_ARCH_SIG_BITOPS static inline void sigaddset(sigset_t *set, int _sig) @@ -199,15 +199,14 @@ static inline int sigfindinword(unsigned long word) return word ^ 31; } -struct pt_regs; -extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); +#endif /* !CONFIG_CPU_HAS_NO_BITFIELDS */ -#else - -#undef __HAVE_ARCH_SIG_BITOPS +#ifdef __uClinux__ #define ptrace_signal_deliver(regs, cookie) do { } while (0) - +#else +struct pt_regs; +extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); #endif /* __uClinux__ */ -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _M68K_SIGNAL_H */ diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h index ccea925..47b01f4 100644 --- a/arch/m68k/include/asm/system.h +++ b/arch/m68k/include/asm/system.h @@ -1,5 +1,193 @@ -#ifdef __uClinux__ -#include "system_no.h" +#ifndef _M68K_SYSTEM_H +#define _M68K_SYSTEM_H + +#include <linux/linkage.h> +#include <linux/kernel.h> +#include <linux/irqflags.h> +#include <asm/segment.h> +#include <asm/entry.h> + +#ifdef __KERNEL__ + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + */ +/* + * switch_to() saves the extra registers, that are not saved + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and + * a0-a1. Some of these are used by schedule() and its predecessors + * and so we might get see unexpected behaviors when a task returns + * with unexpected register values. + * + * syscall stores these registers itself and none of them are used + * by syscall after the function in the syscall has been called. + * + * Beware that resume now expects *next to be in d1 and the offset of + * tss to be in a1. This saves a few instructions as we no longer have + * to push them onto the stack and read them back right after. + * + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) + * + * Changed 96/09/19 by Andreas Schwab + * pass prev in a0, next in a1 + */ +asmlinkage void resume(void); +#define switch_to(prev,next,last) do { \ + register void *_prev __asm__ ("a0") = (prev); \ + register void *_next __asm__ ("a1") = (next); \ + register void *_last __asm__ ("d1"); \ + __asm__ __volatile__("jbsr resume" \ + : "=a" (_prev), "=a" (_next), "=d" (_last) \ + : "0" (_prev), "1" (_next) \ + : "d0", "d2", "d3", "d4", "d5"); \ + (last) = _last; \ +} while (0) + + +/* + * Force strict CPU ordering. + * Not really required on m68k... + */ +#define nop() do { asm volatile ("nop"); barrier(); } while (0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() +#define read_barrier_depends() ((void)0) +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() ((void)0) + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +#ifndef CONFIG_RMW_INSNS +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + unsigned long flags, tmp; + + local_irq_save(flags); + + switch (size) { + case 1: + tmp = *(u8 *)ptr; + *(u8 *)ptr = x; + x = tmp; + break; + case 2: + tmp = *(u16 *)ptr; + *(u16 *)ptr = x; + x = tmp; + break; + case 4: + tmp = *(u32 *)ptr; + *(u32 *)ptr = x; + x = tmp; + break; + default: + BUG(); + } + + local_irq_restore(flags); + return x; +} #else -#include "system_mm.h" +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ + ("moveb %2,%0\n\t" + "1:\n\t" + "casb %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 2: + __asm__ __volatile__ + ("movew %2,%0\n\t" + "1:\n\t" + "casw %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + case 4: + __asm__ __volatile__ + ("movel %2,%0\n\t" + "1:\n\t" + "casl %0,%1,%2\n\t" + "jne 1b" + : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); + break; + } + return x; +} #endif + +#include <asm-generic/cmpxchg-local.h> + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ +#ifdef CONFIG_RMW_INSNS +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 1: + __asm__ __volatile__ ("casb %0,%2,%1" + : "=d" (old), "=m" (*(char *)p) + : "d" (new), "0" (old), "m" (*(char *)p)); + break; + case 2: + __asm__ __volatile__ ("casw %0,%2,%1" + : "=d" (old), "=m" (*(short *)p) + : "d" (new), "0" (old), "m" (*(short *)p)); + break; + case 4: + __asm__ __volatile__ ("casl %0,%2,%1" + : "=d" (old), "=m" (*(int *)p) + : "d" (new), "0" (old), "m" (*(int *)p)); + break; + } + return old; +} + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#else + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) + +#include <asm-generic/cmpxchg.h> + +#endif + +#define arch_align_stack(x) (x) + +#endif /* __KERNEL__ */ + +#endif /* _M68K_SYSTEM_H */ diff --git a/arch/m68k/include/asm/system_mm.h b/arch/m68k/include/asm/system_mm.h deleted file mode 100644 index 47b01f4..0000000 --- a/arch/m68k/include/asm/system_mm.h +++ /dev/null @@ -1,193 +0,0 @@ -#ifndef _M68K_SYSTEM_H -#define _M68K_SYSTEM_H - -#include <linux/linkage.h> -#include <linux/kernel.h> -#include <linux/irqflags.h> -#include <asm/segment.h> -#include <asm/entry.h> - -#ifdef __KERNEL__ - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1 - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) do { \ - register void *_prev __asm__ ("a0") = (prev); \ - register void *_next __asm__ ("a1") = (next); \ - register void *_last __asm__ ("d1"); \ - __asm__ __volatile__("jbsr resume" \ - : "=a" (_prev), "=a" (_next), "=d" (_last) \ - : "0" (_prev), "1" (_next) \ - : "d0", "d2", "d3", "d4", "d5"); \ - (last) = _last; \ -} while (0) - - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() do { asm volatile ("nop"); barrier(); } while (0) -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() ((void)0) -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long flags, tmp; - - local_irq_save(flags); - - switch (size) { - case 1: - tmp = *(u8 *)ptr; - *(u8 *)ptr = x; - x = tmp; - break; - case 2: - tmp = *(u16 *)ptr; - *(u16 *)ptr = x; - x = tmp; - break; - case 4: - tmp = *(u32 *)ptr; - *(u32 *)ptr = x; - x = tmp; - break; - default: - BUG(); - } - - local_irq_restore(flags); - return x; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include <asm-generic/cmpxchg-local.h> - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ -#ifdef CONFIG_RMW_INSNS -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ ("casb %0,%2,%1" - : "=d" (old), "=m" (*(char *)p) - : "d" (new), "0" (old), "m" (*(char *)p)); - break; - case 2: - __asm__ __volatile__ ("casw %0,%2,%1" - : "=d" (old), "=m" (*(short *)p) - : "d" (new), "0" (old), "m" (*(short *)p)); - break; - case 4: - __asm__ __volatile__ ("casl %0,%2,%1" - : "=d" (old), "=m" (*(int *)p) - : "d" (new), "0" (old), "m" (*(int *)p)); - break; - } - return old; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#else - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) - -#include <asm-generic/cmpxchg.h> - -#endif - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SYSTEM_H */ diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h deleted file mode 100644 index 6fe9f93..0000000 --- a/arch/m68k/include/asm/system_no.h +++ /dev/null @@ -1,153 +0,0 @@ -#ifndef _M68KNOMMU_SYSTEM_H -#define _M68KNOMMU_SYSTEM_H - -#include <linux/linkage.h> -#include <linux/irqflags.h> -#include <asm/segment.h> -#include <asm/entry.h> - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1, offset of tss in d1, and whether - * the mm structures are shared in d2 (to avoid atc flushing). - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) \ -{ \ - void *_last; \ - __asm__ __volatile__( \ - "movel %1, %%a0\n\t" \ - "movel %2, %%a1\n\t" \ - "jbsr resume\n\t" \ - "movel %%d1, %0\n\t" \ - : "=d" (_last) \ - : "d" (prev), "d" (next) \ - : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ - (last) = _last; \ -} - -#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() asm volatile ("nop"::) -#define mb() asm volatile ("" : : :"memory") -#define rmb() asm volatile ("" : : :"memory") -#define wmb() asm volatile ("" : : :"memory") -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) - -#define read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long tmp, flags; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "moveb %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "movew %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "movel %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - local_irq_restore(flags); - return tmp; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include <asm-generic/cmpxchg-local.h> - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#include <asm-generic/cmpxchg.h> - -#define arch_align_stack(x) (x) - - -#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h index 0bffb17..151068f 100644 --- a/arch/m68k/include/asm/traps.h +++ b/arch/m68k/include/asm/traps.h @@ -22,7 +22,6 @@ extern e_vector vectors[]; asmlinkage void auto_inthandler(void); asmlinkage void user_inthandler(void); asmlinkage void bad_inthandler(void); -extern void init_vectors(void); #endif diff --git a/arch/m68k/kernel/irq.c b/arch/m68k/kernel/irq.c index 544b871..c73988c 100644 --- a/arch/m68k/kernel/irq.c +++ b/arch/m68k/kernel/irq.c @@ -28,3 +28,13 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) set_irq_regs(oldregs); } + + +/* The number of spurious interrupts */ +atomic_t irq_err_count; + +int arch_show_interrupts(struct seq_file *p, int prec) +{ + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); + return 0; +} diff --git a/arch/m68k/kernel/module.c b/arch/m68k/kernel/module.c index 7ea203c..34849c4 100644 --- a/arch/m68k/kernel/module.c +++ b/arch/m68k/kernel/module.c @@ -1,5 +1,129 @@ -#ifdef CONFIG_MMU -#include "module_mm.c" +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> + +#if 0 +#define DEBUGP printk #else -#include "module_no.c" +#define DEBUGP(fmt...) +#endif + +#ifdef CONFIG_MODULES + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_68K_32: + /* We add the value into the location given */ + *location += sym->st_value; + break; + case R_68K_PC32: + /* Add the value, subtract its postition */ + *location += sym->st_value - (uint32_t)location; + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + + DEBUGP("Applying relocate_add section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_68K_32: + /* We add the value into the location given */ + *location = rel[i].r_addend + sym->st_value; + break; + case R_68K_PC32: + /* Add the value, subtract its postition */ + *location = rel[i].r_addend + sym->st_value - (uint32_t)location; + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *mod) +{ + module_fixup(mod, mod->arch.fixup_start, mod->arch.fixup_end); + return 0; +} + +#endif /* CONFIG_MODULES */ + +void module_fixup(struct module *mod, struct m68k_fixup_info *start, + struct m68k_fixup_info *end) +{ +#ifdef CONFIG_MMU + struct m68k_fixup_info *fixup; + + for (fixup = start; fixup < end; fixup++) { + switch (fixup->type) { + case m68k_fixup_memoffset: + *(u32 *)fixup->addr = m68k_memoffset; + break; + case m68k_fixup_vnode_shift: + *(u16 *)fixup->addr += m68k_virt_to_node_shift; + break; + } + } #endif +} diff --git a/arch/m68k/kernel/module_mm.c b/arch/m68k/kernel/module_mm.c deleted file mode 100644 index ceafc47..0000000 --- a/arch/m68k/kernel/module_mm.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -#ifdef CONFIG_MODULES - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_68K_32: - /* We add the value into the location given */ - *location += sym->st_value; - break; - case R_68K_PC32: - /* Add the value, subtract its postition */ - *location += sym->st_value - (uint32_t)location; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate_add section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_68K_32: - /* We add the value into the location given */ - *location = rel[i].r_addend + sym->st_value; - break; - case R_68K_PC32: - /* Add the value, subtract its postition */ - *location = rel[i].r_addend + sym->st_value - (uint32_t)location; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *mod) -{ - module_fixup(mod, mod->arch.fixup_start, mod->arch.fixup_end); - - return 0; -} - -#endif /* CONFIG_MODULES */ - -void module_fixup(struct module *mod, struct m68k_fixup_info *start, - struct m68k_fixup_info *end) -{ - struct m68k_fixup_info *fixup; - - for (fixup = start; fixup < end; fixup++) { - switch (fixup->type) { - case m68k_fixup_memoffset: - *(u32 *)fixup->addr = m68k_memoffset; - break; - case m68k_fixup_vnode_shift: - *(u16 *)fixup->addr += m68k_virt_to_node_shift; - break; - } - } -} diff --git a/arch/m68k/kernel/module_no.c b/arch/m68k/kernel/module_no.c deleted file mode 100644 index 5a097c6..0000000 --- a/arch/m68k/kernel/module_no.c +++ /dev/null @@ -1,92 +0,0 @@ -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_68K_32: - /* We add the value into the location given */ - *location += sym->st_value; - break; - case R_68K_PC32: - /* Add the value, subtract its postition */ - *location += sym->st_value - (uint32_t)location; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - - DEBUGP("Applying relocate_add section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rel[i].r_info); - - switch (ELF32_R_TYPE(rel[i].r_info)) { - case R_68K_32: - /* We add the value into the location given */ - *location = rel[i].r_addend + sym->st_value; - break; - case R_68K_PC32: - /* Add the value, subtract its postition */ - *location = rel[i].r_addend + sym->st_value - (uint32_t)location; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} diff --git a/arch/m68k/kernel/traps_no.c b/arch/m68k/kernel/traps_no.c index a768008..e67b8c8 100644 --- a/arch/m68k/kernel/traps_no.c +++ b/arch/m68k/kernel/traps_no.c @@ -60,10 +60,6 @@ static char const * const vec_names[] = { "MMU CONFIGURATION ERROR" }; -void __init trap_init(void) -{ -} - void die_if_kernel(char *str, struct pt_regs *fp, int nr) { if (!(fp->sr & PS_S)) diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index df421e5..1a1bd90 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -9,6 +9,6 @@ lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ifdef CONFIG_MMU lib-y += string.o uaccess.o checksum_mm.o else -lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o delay.o checksum_no.o +lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o checksum_no.o endif diff --git a/arch/m68k/lib/delay.c b/arch/m68k/lib/delay.c deleted file mode 100644 index 5bd5472..0000000 --- a/arch/m68k/lib/delay.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/m68knommu/lib/delay.c - * - * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <asm/param.h> -#include <asm/delay.h> - -EXPORT_SYMBOL(udelay); - -void udelay(unsigned long usecs) -{ - _udelay(usecs); -} - diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 7cbd7bd..50cd12c 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -42,7 +42,7 @@ * ZERO_PAGE is a special page that is used for zero-initialized * data and COW. */ -unsigned long empty_zero_page; +void *empty_zero_page; extern unsigned long memory_start; extern unsigned long memory_end; @@ -62,8 +62,8 @@ void __init paging_init(void) unsigned long end_mem = memory_end & PAGE_MASK; unsigned long zones_size[MAX_NR_ZONES] = {0, }; - empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - memset((void *)empty_zero_page, 0, PAGE_SIZE); + empty_zero_page = alloc_bootmem_pages(PAGE_SIZE); + memset(empty_zero_page, 0, PAGE_SIZE); /* * Set up SFC/DFC registers (user data space). @@ -120,7 +120,8 @@ void free_initrd_mem(unsigned long start, unsigned long end) totalram_pages++; pages++; } - printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages * (PAGE_SIZE / 1024)); + pr_notice("Freeing initrd memory: %luk freed\n", + pages * (PAGE_SIZE / 1024)); } #endif @@ -141,7 +142,7 @@ void free_initmem(void) free_page(addr); totalram_pages++; } - printk(KERN_NOTICE "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", + pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n", (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), (int)(addr - PAGE_SIZE)); diff --git a/arch/m68k/platform/5206/config.c b/arch/m68k/platform/5206/config.c index 9c33546..6fa3f80 100644 --- a/arch/m68k/platform/5206/config.c +++ b/arch/m68k/platform/5206/config.c @@ -98,6 +98,12 @@ void m5206_cpu_reset(void) void __init config_BSP(char *commandp, int size) { +#if defined(CONFIG_NETtel) + /* Copy command line from FLASH to local buffer... */ + memcpy(commandp, (char *) 0xf0004000, size); + commandp[size-1] = 0; +#endif /* CONFIG_NETtel */ + mach_reset = m5206_cpu_reset; m5206_timers_init(); m5206_uarts_init(); diff --git a/arch/m68k/platform/5206e/Makefile b/arch/m68k/platform/5206e/Makefile deleted file mode 100644 index b5db056..0000000 --- a/arch/m68k/platform/5206e/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the m68knommu linux kernel. -# - -# -# If you want to play with the HW breakpoints then you will -# need to add define this, which will give you a stack backtrace -# on the console port whenever a DBG interrupt occurs. You have to -# set up you HW breakpoints to trigger a DBG interrupt: -# -# ccflags-y := -DTRAP_DBG_INTERRUPT -# asflags-y := -DTRAP_DBG_INTERRUPT -# - -asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 - -obj-y := config.o gpio.o - diff --git a/arch/m68k/platform/5206e/config.c b/arch/m68k/platform/5206e/config.c deleted file mode 100644 index 9423979..0000000 --- a/arch/m68k/platform/5206e/config.c +++ /dev/null @@ -1,127 +0,0 @@ -/***************************************************************************/ - -/* - * linux/arch/m68knommu/platform/5206e/config.c - * - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - */ - -/***************************************************************************/ - -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/io.h> -#include <asm/machdep.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfuart.h> -#include <asm/mcfdma.h> - -/***************************************************************************/ - -static struct mcf_platform_uart m5206e_uart_platform[] = { - { - .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 73, - }, - { - .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 74, - }, - { }, -}; - -static struct platform_device m5206e_uart = { - .name = "mcfuart", - .id = 0, - .dev.platform_data = m5206e_uart_platform, -}; - -static struct platform_device *m5206e_devices[] __initdata = { - &m5206e_uart, -}; - -/***************************************************************************/ - -static void __init m5206e_uart_init_line(int line, int irq) -{ - if (line == 0) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART0); - } else if (line == 1) { - writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART1); - } -} - -static void __init m5206e_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m5206e_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m5206e_uart_init_line(line, m5206e_uart_platform[line].irq); -} - -/***************************************************************************/ - -static void __init m5206e_timers_init(void) -{ - /* Timer1 is always used as system timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER1ICR); - mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); - -#ifdef CONFIG_HIGHPROFILE - /* Timer2 is to be used as a high speed profile timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER2ICR); - mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); -#endif -} - -/***************************************************************************/ - -void m5206e_cpu_reset(void) -{ - local_irq_disable(); - /* Set watchdog to soft reset, and enabled */ - __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); - for (;;) - /* wait for watchdog to timeout */; -} - -/***************************************************************************/ - -void __init config_BSP(char *commandp, int size) -{ -#if defined(CONFIG_NETtel) - /* Copy command line from FLASH to local buffer... */ - memcpy(commandp, (char *) 0xf0004000, size); - commandp[size-1] = 0; -#endif /* CONFIG_NETtel */ - - mach_reset = m5206e_cpu_reset; - m5206e_timers_init(); - m5206e_uarts_init(); - - /* Only support the external interrupts on their primary level */ - mcf_mapirq2imr(25, MCFINTC_EINT1); - mcf_mapirq2imr(28, MCFINTC_EINT4); - mcf_mapirq2imr(31, MCFINTC_EINT7); -} - -/***************************************************************************/ - -static int __init init_BSP(void) -{ - platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices)); - return 0; -} - -arch_initcall(init_BSP); - -/***************************************************************************/ diff --git a/arch/m68k/platform/5206e/gpio.c b/arch/m68k/platform/5206e/gpio.c deleted file mode 100644 index b9ab4a1..0000000 --- a/arch/m68k/platform/5206e/gpio.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Coldfire generic GPIO support - * - * (C) Copyright 2009, Steven King <sfking@fdwdc.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfgpio.h> - -static struct mcf_gpio_chip mcf_gpio_chips[] = { - { - .gpio_chip = { - .label = "PP", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value, - .ngpio = 8, - }, - .pddr = (void __iomem *) MCFSIM_PADDR, - .podr = (void __iomem *) MCFSIM_PADAT, - .ppdr = (void __iomem *) MCFSIM_PADAT, - }, -}; - -static int __init mcf_gpio_init(void) -{ - unsigned i = 0; - while (i < ARRAY_SIZE(mcf_gpio_chips)) - (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); - return 0; -} - -core_initcall(mcf_gpio_init); diff --git a/arch/m68k/platform/5272/intc.c b/arch/m68k/platform/5272/intc.c index 7e715df..7160e61 100644 --- a/arch/m68k/platform/5272/intc.c +++ b/arch/m68k/platform/5272/intc.c @@ -162,8 +162,6 @@ void __init init_IRQ(void) { int irq, edge; - init_vectors(); - /* Mask all interrupt sources */ writel(0x88888888, MCF_MBAR + MCFSIM_ICR1); writel(0x88888888, MCF_MBAR + MCFSIM_ICR2); diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index f68dce7..293e1eb 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -236,27 +236,26 @@ ret_from_interrupt: * Handler for uninitialized and spurious interrupts. */ ENTRY(bad_interrupt) - addql #1,num_spurious + addql #1,irq_err_count rte /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. */ ENTRY(resume) movel %a0,%d1 /* save prev thread in d1 */ movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */ - movel %usp,%a2 /* save usp */ - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */ + movel %usp,%a3 /* save usp */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */ + movel %a3,%usp movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */ - movel %a0,%usp movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */ rts diff --git a/arch/m68k/platform/68328/ints.c b/arch/m68k/platform/68328/ints.c index a90288c..4bd4565 100644 --- a/arch/m68k/platform/68328/ints.c +++ b/arch/m68k/platform/68328/ints.c @@ -70,9 +70,6 @@ asmlinkage irqreturn_t inthandler7(void); extern e_vector *_ramvec; -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - /* The 68k family did not have a good way to determine the source * of interrupts until later in the family. The EC000 core does * not provide the vector number on the stack, we vector everything @@ -155,7 +152,7 @@ static struct irq_chip intc_irq_chip = { * This function should be called during kernel startup to initialize * the machine vector table. */ -void __init init_IRQ(void) +void __init trap_init(void) { int i; @@ -172,6 +169,11 @@ void __init init_IRQ(void) _ramvec[69] = (e_vector) inthandler5; _ramvec[70] = (e_vector) inthandler6; _ramvec[71] = (e_vector) inthandler7; +} + +void __init init_IRQ(void) +{ + int i; IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */ diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index a07b14f..abbb896 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -157,27 +157,26 @@ ret_from_interrupt: * Handler for uninitialized and spurious interrupts. */ bad_interrupt: - addql #1,num_spurious + addql #1,irq_err_count rte /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. */ ENTRY(resume) movel %a0,%d1 /* save prev thread in d1 */ movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */ - movel %usp,%a2 /* save usp */ - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */ + movel %usp,%a3 /* save usp */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */ + movel %a3,%usp movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore user stack */ - movel %a0,%usp movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */ rts diff --git a/arch/m68k/platform/68360/ints.c b/arch/m68k/platform/68360/ints.c index 4af0f4e..7b40202 100644 --- a/arch/m68k/platform/68360/ints.c +++ b/arch/m68k/platform/68360/ints.c @@ -34,9 +34,6 @@ asmlinkage void inthandler(void); extern void *_ramvec[]; -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - static void intc_irq_unmask(struct irq_data *d) { pquicc->intr_cimr |= (1 << d->irq); @@ -63,9 +60,8 @@ static struct irq_chip intc_irq_chip = { * This function should be called during kernel startup to initialize * the vector table. */ -void init_IRQ(void) +void __init trap_init(void) { - int i; int vba = (CPM_VECTOR_BASE<<4); /* set up the vectors */ @@ -130,6 +126,11 @@ void init_IRQ(void) /* turn off all CPM interrupts */ pquicc->intr_cimr = 0x00000000; +} + +void init_IRQ(void) +{ + int i; for (i = 0; (i < NR_IRQS); i++) { irq_set_chip(i, &intc_irq_chip); diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 27c2b00..bd27242 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -182,21 +182,23 @@ ENTRY(inthandler) /* * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these + * in a0, next (the new task) is in a1, so don't change these * registers until their contents are no longer needed. - * This is always called in supervisor mode, so don't bother to save - * and restore sr; user's process sr is actually in the stack. */ ENTRY(resume) - movel %a0, %d1 /* get prev thread in d1 */ - RDUSP - movel %a2,%a0@(TASK_THREAD+THREAD_USP) - + movew %sr,%d1 /* save current status */ + movew %d1,%a0@(TASK_THREAD+THREAD_SR) + movel %a0,%d1 /* get prev thread in d1 */ SAVE_SWITCH_STACK movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */ - movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ + RDUSP /* movel %usp,%a3 */ + movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */ + + movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */ + WRUSP /* movel %a3,%usp */ + movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */ + movew %a1@(TASK_THREAD+THREAD_SR),%d7 /* restore new status */ + movew %d7,%sr RESTORE_SWITCH_STACK - - movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */ - WRUSP rts + diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c index 74b55cf..9950933 100644 --- a/arch/m68k/platform/coldfire/intc-2.c +++ b/arch/m68k/platform/coldfire/intc-2.c @@ -194,8 +194,6 @@ void __init init_IRQ(void) { int irq; - init_vectors(); - /* Mask all interrupt sources */ __raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL); #ifdef MCFICM_INTC1 diff --git a/arch/m68k/platform/coldfire/intc-simr.c b/arch/m68k/platform/coldfire/intc-simr.c index d6a4d9d..650d52e 100644 --- a/arch/m68k/platform/coldfire/intc-simr.c +++ b/arch/m68k/platform/coldfire/intc-simr.c @@ -171,8 +171,6 @@ void __init init_IRQ(void) { int irq, eirq; - init_vectors(); - /* Mask all interrupt sources */ __raw_writeb(0xff, MCFINTC0_SIMR); if (MCFINTC1_SIMR) diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c index 0bbb414..5c0c150 100644 --- a/arch/m68k/platform/coldfire/intc.c +++ b/arch/m68k/platform/coldfire/intc.c @@ -139,7 +139,6 @@ void __init init_IRQ(void) { int irq; - init_vectors(); mcf_maskimr(0xffffffff); for (irq = 0; (irq < NR_IRQS); irq++) { diff --git a/arch/m68k/platform/coldfire/vectors.c b/arch/m68k/platform/coldfire/vectors.c index a21d3f8..3a7cc52 100644 --- a/arch/m68k/platform/coldfire/vectors.c +++ b/arch/m68k/platform/coldfire/vectors.c @@ -35,21 +35,13 @@ asmlinkage void dbginterrupt_c(struct frame *fp) extern e_vector *_ramvec; -void set_evector(int vecnum, void (*handler)(void)) -{ - if (vecnum >= 0 && vecnum <= 255) - _ramvec[vecnum] = handler; -} - -/***************************************************************************/ - /* Assembler routines */ asmlinkage void buserr(void); asmlinkage void trap(void); asmlinkage void system_call(void); asmlinkage void inthandler(void); -void __init init_vectors(void) +void __init trap_init(void) { int i; |