diff options
-rw-r--r-- | drivers/staging/iio/accel/Kconfig | 1 | ||||
-rw-r--r-- | drivers/staging/iio/accel/adis16204_core.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/accel/sca3000_core.c | 7 | ||||
-rw-r--r-- | drivers/staging/iio/adc/Kconfig | 1 | ||||
-rw-r--r-- | drivers/staging/iio/addac/Kconfig | 1 | ||||
-rw-r--r-- | drivers/staging/iio/dac/ad5504.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/dac/ad5624r_spi.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/dac/ad5686.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/dac/ad5791.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/gyro/adis16080_core.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/gyro/adis16260_core.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/gyro/adxrs450_core.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/magnetometer/Kconfig | 1 | ||||
-rw-r--r-- | drivers/staging/iio/meter/ade7753.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/meter/ade7754.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/meter/ade7758_core.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/meter/ade7759.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/meter/ade7854.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/resolver/Kconfig | 2 |
19 files changed, 9 insertions, 17 deletions
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index 71f8739..5ab7167 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -67,6 +67,7 @@ config LIS3L02DQ depends on SPI select IIO_TRIGGER if IIO_BUFFER depends on !IIO_BUFFER || IIO_KFIFO_BUF || IIO_SW_RING + depends on GENERIC_GPIO help Say yes here to build SPI support for the ST microelectronics accelerometer. The driver supplies direct access via sysfs files diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c index 2ca617d..1b8b594 100644 --- a/drivers/staging/iio/accel/adis16204_core.c +++ b/drivers/staging/iio/accel/adis16204_core.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c index f2cdb1f..edc62ee 100644 --- a/drivers/staging/iio/accel/sca3000_core.c +++ b/drivers/staging/iio/accel/sca3000_core.c @@ -11,7 +11,6 @@ */ #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/slab.h> @@ -1167,7 +1166,7 @@ static int __devinit sca3000_probe(struct spi_device *spi) iio_scan_mask_set(indio_dev->buffer, 2); } - if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) { + if (spi->irq) { ret = request_threaded_irq(spi->irq, NULL, &sca3000_event_handler, @@ -1184,7 +1183,7 @@ static int __devinit sca3000_probe(struct spi_device *spi) return 0; error_free_irq: - if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) + if (spi->irq) free_irq(spi->irq, indio_dev); error_unregister_ring: iio_buffer_unregister(indio_dev); @@ -1226,7 +1225,7 @@ static int sca3000_remove(struct spi_device *spi) ret = sca3000_stop_all_interrupts(st); if (ret) return ret; - if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) + if (spi->irq) free_irq(spi->irq, indio_dev); iio_buffer_unregister(indio_dev); sca3000_unconfigure_ring(indio_dev); diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 2c1b7de..3bf975a 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -150,6 +150,7 @@ config AD7746 config AD7816 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" depends on SPI + depends on GENERIC_GPIO help Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig index 869540e..4b76375 100644 --- a/drivers/staging/iio/addac/Kconfig +++ b/drivers/staging/iio/addac/Kconfig @@ -5,6 +5,7 @@ menu "Analog digital bi-direction convertors" config ADT7316 tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver" + depends on GENERIC_GPIO help Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318 and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC. diff --git a/drivers/staging/iio/dac/ad5504.c b/drivers/staging/iio/dac/ad5504.c index a430874..c33643f 100644 --- a/drivers/staging/iio/dac/ad5504.c +++ b/drivers/staging/iio/dac/ad5504.c @@ -7,7 +7,6 @@ */ #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/kernel.h> diff --git a/drivers/staging/iio/dac/ad5624r_spi.c b/drivers/staging/iio/dac/ad5624r_spi.c index 8e7fafb..2d2c946 100644 --- a/drivers/staging/iio/dac/ad5624r_spi.c +++ b/drivers/staging/iio/dac/ad5624r_spi.c @@ -7,7 +7,6 @@ */ #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/kernel.h> diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c index adf898f..fa59bfc 100644 --- a/drivers/staging/iio/dac/ad5686.c +++ b/drivers/staging/iio/dac/ad5686.c @@ -7,7 +7,6 @@ */ #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/module.h> diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c index 6c34700..8b1b1b5 100644 --- a/drivers/staging/iio/dac/ad5791.c +++ b/drivers/staging/iio/dac/ad5791.c @@ -7,7 +7,6 @@ */ #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/kernel.h> diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c index 07b013a..1ca4506 100644 --- a/drivers/staging/iio/gyro/adis16080_core.c +++ b/drivers/staging/iio/gyro/adis16080_core.c @@ -5,7 +5,6 @@ * * Licensed under the GPL-2 or later. */ -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index dc440d15..ccbf226 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/staging/iio/gyro/adxrs450_core.c index 1fda3db..912baa1 100644 --- a/drivers/staging/iio/gyro/adxrs450_core.c +++ b/drivers/staging/iio/gyro/adxrs450_core.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig index b8c149d..722c4e1 100644 --- a/drivers/staging/iio/magnetometer/Kconfig +++ b/drivers/staging/iio/magnetometer/Kconfig @@ -6,6 +6,7 @@ menu "Magnetometer sensors" config SENSORS_AK8975 tristate "Asahi Kasei AK8975 3-Axis Magnetometer" depends on I2C + depends on GENERIC_GPIO help Say yes here to build support for Asahi Kasei AK8975 3-Axis Magnetometer. diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c index 3d62bfd..3be88f2 100644 --- a/drivers/staging/iio/meter/ade7753.c +++ b/drivers/staging/iio/meter/ade7753.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c index cdb62a4..f7b20a2 100644 --- a/drivers/staging/iio/meter/ade7754.c +++ b/drivers/staging/iio/meter/ade7754.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c index 3f31368..6ea5c74 100644 --- a/drivers/staging/iio/meter/ade7758_core.c +++ b/drivers/staging/iio/meter/ade7758_core.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index 69b1f8b..511a605 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c index bc1f83e..d438c03 100644 --- a/drivers/staging/iio/meter/ade7854.c +++ b/drivers/staging/iio/meter/ade7854.c @@ -8,7 +8,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/delay.h> #include <linux/mutex.h> #include <linux/device.h> diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig index 90b3bbc..49f69ef 100644 --- a/drivers/staging/iio/resolver/Kconfig +++ b/drivers/staging/iio/resolver/Kconfig @@ -13,6 +13,7 @@ config AD2S90 config AD2S1200 tristate "Analog Devices ad2s1200/ad2s1205 driver" depends on SPI + depends on GENERIC_GPIO help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1200 and ad2s1205, provides direct access @@ -21,6 +22,7 @@ config AD2S1200 config AD2S1210 tristate "Analog Devices ad2s1210 driver" depends on SPI + depends on GENERIC_GPIO help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1210, provides direct access via sysfs. |