diff options
73 files changed, 733 insertions, 881 deletions
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts index 0d3dbf1..c202ed3 100644 --- a/Documentation/arm/Interrupts +++ b/Documentation/arm/Interrupts @@ -138,14 +138,8 @@ So, what's changed? Set active the IRQ edge(s)/level. This replaces the SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge() - function. Type should be one of the following: - - #define IRQT_NOEDGE (0) - #define IRQT_RISING (__IRQT_RISEDGE) - #define IRQT_FALLING (__IRQT_FALEDGE) - #define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) - #define IRQT_LOW (__IRQT_LOWLVL) - #define IRQT_HIGH (__IRQT_HIGHLVL) + function. Type should be one of IRQ_TYPE_xxx defined in + <linux/irq.h> 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dabb015..c8f5282 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -314,7 +314,7 @@ config ARCH_IOP32X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -325,7 +325,7 @@ config ARCH_IOP33X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's IOP33X (XScale) family of processors. @@ -418,7 +418,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b20995a..2f07477 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi -tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) +tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index c3c3a33..8557965 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type) mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= mask; else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= mask; else GPIO_IRQ_falling_edge &= ~mask; @@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip) /* * Install handler for IRQ_LOCOMO_HW. */ - set_irq_type(lchip->irq, IRQT_FALLING); + set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); set_irq_chip_data(lchip->irq, irqbase); set_irq_chained_handler(lchip->irq, locomo_handler); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 0a8e1ff..f6d3fdd 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip0 &= ~mask; else ip0 |= mask; @@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip1 &= ~mask; else ip1 |= mask; @@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) /* * Register SA1111 interrupt */ - set_irq_type(sachip->irq, IRQT_RISING); + set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); set_irq_data(sachip->irq, irqbase); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 493ecee..2307587 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -1,15 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-hh17 -# Fri Nov 9 20:23:03 2007 +# Linux kernel version: 2.6.26 +# Sat Jul 26 22:28:46 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type @@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set @@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_BOARD_IRQ_MAP_SMALL is not set -CONFIG_BOARD_IRQ_MAP_BIG=y -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set -CONFIG_TOSHIBA_TMIO_OHCI=y -CONFIG_ARCH_ESERIES=y +# CONFIG_PXA_SHARPSL is not set +CONFIG_ARCH_PXA_ESERIES=y CONFIG_MACH_E330=y +CONFIG_MACH_E350=y CONFIG_MACH_E740=y CONFIG_MACH_E750=y CONFIG_MACH_E400=y CONFIG_MACH_E800=y -CONFIG_E330_LCD=y -CONFIG_E740_LCD=y -CONFIG_E750_LCD=y -CONFIG_E400_LCD=y -CONFIG_E800_LCD=y -CONFIG_ESERIES_UDC=y -CONFIG_E330_TC6387XB=y -CONFIG_E740_T7L66XB=y -CONFIG_E400_T7L66XB=y -CONFIG_E750_E800_TC6393XB=y -CONFIG_E740_PCMCIA=m -CONFIG_E750_PCMCIA=m -CONFIG_E800_PCMCIA=m -# CONFIG_MACH_A620 is not set -# CONFIG_MACH_A716 is not set -# CONFIG_MACH_A730 is not set -# CONFIG_ARCH_H1900 is not set -# CONFIG_ARCH_H2200 is not set -# CONFIG_MACH_H3900 is not set -# CONFIG_MACH_H4000 is not set -# CONFIG_MACH_H4700 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_ARCH_H5400 is not set -# CONFIG_MACH_HIMALAYA is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -# CONFIG_MACH_HTCALPINE is not set -# CONFIG_MACH_MAGICIAN is not set -# CONFIG_MACH_HTCAPACHE is not set -# CONFIG_MACH_BLUEANGEL is not set - -# -# HTC_HW6X00 -# -# CONFIG_MACH_HTCBEETLES is not set -# CONFIG_MACH_HW6900 is not set -# CONFIG_MACH_HTCATHENA is not set -# CONFIG_ARCH_AXIMX3 is not set -# CONFIG_ARCH_AXIMX5 is not set -# CONFIG_MACH_X50 is not set -# CONFIG_ARCH_ROVERP1 is not set -# CONFIG_ARCH_ROVERP5P is not set -# CONFIG_MACH_XSCALE_PALMLD is not set -# CONFIG_MACH_T3XSCALE is not set -# CONFIG_MACH_RECON is not set -# CONFIG_MACH_GHI270HG is not set -# CONFIG_MACH_GHI270 is not set -# CONFIG_MACH_LOOXC550 is not set -# CONFIG_PXA_SHARPSL is not set # CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA25x=y +# CONFIG_PXA_PWM is not set + +# +# Boot options +# # -# Linux As Bootloader +# Power management # -# CONFIG_LAB is not set # # Processor Type @@ -215,6 +208,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y @@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -CONFIG_PCMCIA_PXA2XX=m # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y @@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y -# CONFIG_TXTOFFSET_DELTA is not set +CONFIG_ATAGS_PROC=y # # CPU Frequency scaling @@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_DPM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -318,13 +318,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +# CONFIG_CAN is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=y +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_PARTITIONS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set # CONFIG_MTD_BLOCK_RO is not set # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -565,7 +579,7 @@ CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -579,6 +593,7 @@ CONFIG_SCSI=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -586,132 +601,78 @@ CONFIG_SCSI=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set # CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -# CONFIG_HOSTAP_FIRMWARE is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_ACX is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_LED_TRIGGER is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PXA is not set -# CONFIG_RS232_SERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_SA1100_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_TIHTC is not set # # PCMCIA character devices @@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set -# CONFIG_POWER_SUPPLY is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set - -# -# Misc devices +# I2C GPIO expanders: # # -# Multimedia Capabilities Port drivers +# PCI GPIO expanders: # -# CONFIG_ADC is not set # -# Compaq/iPAQ Drivers +# SPI GPIO expanders: # +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Compaq/HP iPAQ Drivers +# Sonics Silicon Backplane # -# CONFIG_IPAQ_SLEEVE is not set -# CONFIG_SLEEVE_DEBUG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +CONFIG_MFD_CORE=y # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC2 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_BBKEYS is not set -# CONFIG_HTC_ASIC3_DS1WM is not set -# CONFIG_SOC_SAMCOP is not set -# CONFIG_SOC_HAMCOP is not set -# CONFIG_SOC_MQ11XX is not set -CONFIG_SOC_T7L66XB=y -# CONFIG_SOC_TC6387XB is not set -CONFIG_SOC_TC6393XB=y -# CONFIG_SOC_TSC2101 is not set -# CONFIG_SOC_TSC2200 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_HTC_PASIC3 is not set +CONFIG_MFD_TC6393XB=y # -# LED Triggers +# Multimedia devices # -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # -# CONFIG_FB_IMAGEON is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set CONFIG_FB_W100=y +# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VSFB is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -938,6 +871,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -945,28 +879,13 @@ CONFIG_FONTS=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set -CONFIG_FONT_ACORN_8x8=y -# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# +CONFIG_SND_ARM=y # CONFIG_SND_PXA2XX_AC97 is not set -# CONFIG_SND_RECON is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -CONFIG_SND_SOC_AC97_BUS=y +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Intel PXA2xx -# +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_PXA2XX_SOC=m CONFIG_SND_PXA2XX_SOC_AC97=m -CONFIG_SND_PXA2XX_SOC_E740_WM9705=m -CONFIG_SND_PXA2XX_SOC_E750_WM9705=m -CONFIG_SND_PXA2XX_SOC_E800_WM9712=m -# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set -# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set -# CONFIG_SND_PXA2XX_SOC_H5000 is not set - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Samsung S3C24XX -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM8956 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8976 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8980 is not set -CONFIG_SND_SOC_WM9705=m -# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set +CONFIG_USB_GADGET_PXA25X=y +CONFIG_USB_PXA25X=y +CONFIG_USB_PXA25X_SMALL=y +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_MQ11XX is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_CHAR is not set -# CONFIG_USB_PXA2XX_GPIO is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -# CONFIG_MMC_PXA is not set -CONFIG_MMC_TMIO=y -# CONFIG_MMC_SAMCOP is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_PXA is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_USER is not set # @@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index a1c41d7..117cf6c 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void) /* Serial */ at91_add_device_serial(); /* USB Host */ - set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usbh(&cap9adk_usbh_data); /* USB HS */ - set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usba(&cap9adk_usba_udc_data); /* SPI */ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); @@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void) /* I2C */ at91_add_device_i2c(NULL, 0); /* LCD Controller */ - set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); at91_add_device_lcdc(&cap9adk_lcdc_data); /* AC97 */ at91_add_device_ac97(&cap9adk_ac97_data); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index bbbfd06..bbbfd06 100755..100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 78a5cdb..ca87587 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type) unsigned int smr, srctype; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: srctype = AT91_AIC_SRCTYPE_HIGH; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: srctype = AT91_AIC_SRCTYPE_RISING; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else return -EINVAL; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d7bca6..5fed576 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ ep93xx_gpio_update_int_params(port); } @@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; @@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpio); switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: gpio_int_type1[port] |= port_mask; /* set initial polarity based on current input level */ if (gpio_get_value(gpio)) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index e6695c4..e1b1f02 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) reg = irq >> 5; bit = 1 << (irq % 32); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or GPIOs set to alternate function during probe */ /* TODO: support probe */ @@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) // return 0; // if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) // return 0; -// type = __IRQT_RISEDGE | __IRQT_FALEDGE; +// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } GIUS(reg) |= bit; @@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) DEBUG_IRQ("setting type of irq %d to ", _irq); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); irq_type = 0x0; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); irq_type = 0x1; } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); irq_type = 0x3; } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); irq_type = 0x2; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 81cdc82..daf2807 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) /* * Then, set the proper trigger type. */ - if (type & IRQT_FALLING) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= 1 << line; else GPIO_IRQ_falling_edge &= ~(1 << line); - if (type & IRQT_RISING) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= 1 << line; else GPIO_IRQ_rising_edge &= ~(1 << line); - if (type & IRQT_LOW) + if (type & IRQ_TYPE_LEVEL_LOW) GPIO_IRQ_level_low |= 1 << line; else GPIO_IRQ_level_low &= ~(1 << line); - if (type & IRQT_HIGH) + if (type & IRQ_TYPE_LEVEL_HIGH) GPIO_IRQ_level_high |= 1 << line; else GPIO_IRQ_level_high &= ~(1 << line); diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 5fea5a1..df16a4e 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type) { - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP23XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP23XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index f0f70ba..896ff9f 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) static void __init roadrunner_pci_preinit(void) { - set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp23xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 3f86769..c6e044b 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -30,10 +30,10 @@ void __init avila_pci_preinit(void) { - set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3781b3d..3947c50 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type){ - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP4XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index ad2e5b9..be4f4a2 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -27,8 +27,8 @@ void __init coyote_pci_preinit(void) { - set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); - set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 9db7e1f..926d15f 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -25,12 +25,12 @@ void __init dsmg600_pci_preinit(void) { - set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index f19f3f6..ca12a9c 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -25,9 +25,9 @@ void __init fsg_pci_preinit(void) { - set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index 6abf568..afd1dc1 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -29,8 +29,8 @@ void __init gateway7001_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 49dec78..2096070 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -41,10 +41,10 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 4087960..7d9bb4d 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -27,10 +27,10 @@ void __init ixdp425_pci_preinit(void) { - set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index d1e75b7..37d9f2e 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -25,8 +25,8 @@ void __init ixdpg425_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index b8ebaf4..1088426 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -24,11 +24,11 @@ void __init nas100d_pci_preinit(void) { - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 04661fe..4429b84 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -24,9 +24,9 @@ void __init nslu2_pci_preinit(void) { - set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 6588f2c..0f00fea 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -29,8 +29,8 @@ void __init wg302v2_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 4c3ab43..0b06941a 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type) ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: mode = IOPC_TM_HIGH; level_triggered = 1; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: mode = IOPC_TM_LOW; level_triggered = 1; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: mode = IOPC_TM_RISING; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: mode = IOPC_TM_FALLING; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: mode = IOPC_TM_EDGE; break; default: diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index fd7537f..99d4fb1 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type) irq = _irq - NETX_IRQ_HIF_CHAINED(0); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); val |= (1 << 26) << irq; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); val |= (1 << 26) << irq; } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 845c663..41f94f6 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -288,7 +288,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -483,7 +483,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -494,7 +494,7 @@ static void __init osk_mistral_init(void) int ret = 0; gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e020c27..34389b6 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id) if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_FALLING); + IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_RISING); + IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 5c00b3f..8948d45 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -186,10 +186,10 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0cf62ef..d963125 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 620fa0f..870b349 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -337,17 +337,17 @@ static void __init apollon_sw_init(void) omap_request_gpio(SW_DOWN_GPIO58); omap_set_gpio_direction(SW_DOWN_GPIO58, 1); - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, IRQF_SHARED, "enter sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, IRQF_SHARED, "up sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, IRQF_SHARED, "down sw", &apollon_sw_interrupt)) diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 88405e7..40a0bee 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e2a0084..9ae3f6d 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type) desc = irq_desc + irq; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; /* @@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cause & (1 << pin)) { irq = gpio_to_irq(pin); desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { /* Swap polarity (race with GPIO line) */ u32 polarity = readl(GPIO_IN_POL); polarity ^= 1 << pin; diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 10ae628..2a46d27 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index a9cef97..f270ada 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed to " "set_irq_type pin %d\n", pin); @@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 968d0b0..5ed67e1 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq) static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) { switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */ set_irq_handler(irq, handle_level_irq); break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */ set_irq_handler(irq, handle_level_irq); break; - /* IRQT_BOTHEDGE is not supported */ + /* IRQ_TYPE_EDGE_BOTH is not supported */ default: printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); return -1; diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index bcf0cde..31f5bd4 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio) cmx270_it8152_irq_gpio = irq_gpio; - set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index cc1c4fa..8d1ab54 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index ac26423..af7375b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void) } set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 851ec2d..c8e38b5 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void) MST_INTSETCLR = 0; set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 34cd585..23e9b92 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH); if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING); if (sharpsl_pm.machinfo->gpio_fatal) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING); } if (sharpsl_pm.machinfo->batfull_irq) @@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING); } } diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index dee7bf3..12811b7 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = { [2] = { .start = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ, - .flags = (IORESOURCE_IRQ | IRQT_RISING), + .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING), }, }; diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 31afe50..56d3ee0 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = { static void __init cerf_init_irq(void) { sa1100_init_irq(); - set_irq_type(CERF_ETH_IRQ, IRQT_RISING); + set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); } static struct map_desc cerf_io_desc[] __initdata = { diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 8473c37..b34ff42 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -834,7 +834,7 @@ static void __init h3800_init_irq(void) set_irq_chip(irq, &h3800_gpio_irqchip); } #endif - set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING); + set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); } diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index fa0403a..c5e438b 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type) else mask = GPIO11_27_MASK(irq); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { GPIO_IRQ_rising_edge |= mask; } else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { GPIO_IRQ_falling_edge |= mask; } else GPIO_IRQ_falling_edge &= ~mask; diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 9f1ed15..967a484 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev) /* * Install handler for GPIO25. */ - set_irq_type(IRQ_GPIO25, IRQT_RISING); + set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); /* diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index c7bf7e0..69a71f1 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -143,7 +143,7 @@ static void __init pleb_map_io(void) GPDR &= ~GPIO_ETH0_IRQ; - set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING); + set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING); } MACHINE_START(PLEB, "PLEB") diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index fbfa260..a8ec97b 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) pgd_t *pgd; pmd_t *pmd; pte_t *pte, entry; - int ret = 0; + int ret; pgd = pgd_offset(vma->vm_mm, address); if (pgd_none(*pgd)) @@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) entry = *pte; /* + * If this page is present, it's actually being shared. + */ + ret = pte_present(entry); + + /* * If this page isn't present, or is already setup to * fault (ie, is old), we can safely ignore any issues. */ - if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { + if (ret && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); - ret = 1; } pte_unmap(pte); return ret; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 4a77367..318b268 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type) void __iomem *reg = port->base; switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQT_BOTHEDGE */ + default: /* this includes IRQ_TYPE_EDGE_BOTH */ return -EINVAL; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d8e9c2c..63e0943 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & __IRQT_LOWLVL); + trigger & IRQ_TYPE_LEVEL_LOW); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & __IRQT_HIGHLVL); + trigger & IRQ_TYPE_LEVEL_HIGH); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & __IRQT_RISEDGE); + trigger & IRQ_TYPE_EDGE_RISING); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & __IRQT_FALEDGE); + trigger & IRQ_TYPE_EDGE_FALLING); if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) @@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 2 << (gpio << 1); - if (trigger & __IRQT_FALEDGE) + if (trigger & IRQ_TYPE_EDGE_FALLING) l |= 1 << (gpio << 1); if (trigger) /* Enable wake-up during idle for dynamic tick */ @@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ @@ -924,7 +924,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5e28c21..0af3872 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,7 @@ config PLAT_S3C24XX depends on ARCH_S3C2410 default y if ARCH_S3C2410 select NO_IOPORT - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index ae2c5d7..001436c 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type) /* Set the external interrupt to pointed trigger type */ switch (type) { - case IRQT_NOEDGE: + case IRQ_TYPE_NONE: printk(KERN_WARNING "No edge setting!\n"); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: newvalue = S3C2410_EXTINT_RISEEDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: newvalue = S3C2410_EXTINT_FALLEDGE; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: newvalue = S3C2410_EXTINT_BOTHEDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: newvalue = S3C2410_EXTINT_LOWLEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: newvalue = S3C2410_EXTINT_HILEV; break; diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index de8d186..2014253 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq) - set_irq_type(irq, IRQT_RISING); + set_irq_type(irq, IRQ_TYPE_EDGE_RISING); /* Setup expansion bus chip selects */ *data->cs0_cfg = data->cs0_bits; diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index f9f72a2..006be92 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -125,15 +125,15 @@ static ssize_t flash_read(struct file *file, char __user *buf, size_t size, ssize_t ret; if (flashdebug) - printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, " - "buffer=%p, count=0x%X.\n", p, buf, count); + printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, " + "buffer=%p, count=0x%zx.\n", *ppos, buf, size); /* * We now lock against reads and writes. --rmk */ if (mutex_lock_interruptible(&nwflash_mutex)) return -ERESTARTSYS; - ret = simple_read_from_buffer(buf, size, ppos, FLASH_BASE, gbFlashSize); + ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize); mutex_unlock(&nwflash_mutex); return ret; diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 4e9d8ee..d0e13fc 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) { if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { /* Disable Interrupt */ - set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE); + set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE); if (read_xydata(corgi_ts)) { corgi_ts->pendown = 1; new_data(corgi_ts); @@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) } /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); corgi_ts->pendown = 0; } } @@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev) corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); corgi_ts->power_mode = PWR_MODE_ACTIVE; return 0; @@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev) corgi_ts->power_mode = PWR_MODE_ACTIVE; /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); + set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); return 0; diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index a79f029..590a137 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -198,7 +198,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm) switch (wm->id) { case WM9705_ID2: wm->pen_irq = IRQ_GPIO(4); - set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE); + set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH); break; case WM9712_ID2: case WM9713_ID2: diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index eabf0bf..c6408a6 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -256,28 +256,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) bank + ASIC3_GPIO_TRIGGER_TYPE); asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; - if (type == IRQT_RISING) { + if (type == IRQ_TYPE_EDGE_RISING) { trigger |= bit; edge |= bit; - } else if (type == IRQT_FALLING) { + } else if (type == IRQ_TYPE_EDGE_FALLING) { trigger |= bit; edge &= ~bit; - } else if (type == IRQT_BOTHEDGE) { + } else if (type == IRQ_TYPE_EDGE_BOTH) { trigger |= bit; if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base)) edge &= ~bit; else edge |= bit; asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; - } else if (type == IRQT_LOW) { + } else if (type == IRQ_TYPE_LEVEL_LOW) { trigger &= ~bit; level &= ~bit; - } else if (type == IRQT_HIGH) { + } else if (type == IRQ_TYPE_LEVEL_HIGH) { trigger &= ~bit; level |= bit; } else { /* - * if type == IRQT_NOEDGE, we should mask interrupts, but + * if type == IRQ_TYPE_NONE, we should mask interrupts, but * be careful to not unmask them if mask was also called. * Probably need internal state for mask. */ @@ -343,7 +343,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev) ASIC3_INTMASK_GINTMASK); set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); - set_irq_type(asic->irq_nr, IRQT_RISING); + set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING); set_irq_data(asic->irq_nr, asic); return 0; diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 2d87501..94e55e8 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -324,7 +324,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - set_irq_type(tc6393xb->irq, IRQT_FALLING); + set_irq_type(tc6393xb->irq, IRQ_TYPE_EDGE_FALLING); set_irq_data(tc6393xb->irq, tc6393xb); set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq); } diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 420a775..8c21446 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat */ if (skt->irq_state != 1 && state->io_irq) { skt->irq_state = 1; - set_irq_type(skt->irq, IRQT_FALLING); + set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING); } else if (skt->irq_state == 1 && state->io_irq == 0) { skt->irq_state = 0; - set_irq_type(skt->irq, IRQT_NOEDGE); + set_irq_type(skt->irq, IRQ_TYPE_NONE); } skt->cs_state = *state; @@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt, IRQF_DISABLED, irqs[i].str, skt); if (res) break; - set_irq_type(irqs[i].irq, IRQT_NOEDGE); + set_irq_type(irqs[i].irq, IRQ_TYPE_NONE); } if (res) { @@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt, for (i = 0; i < nr; i++) if (irqs[i].sock == skt->nr) - set_irq_type(irqs[i].irq, IRQT_NOEDGE); + set_irq_type(irqs[i].irq, IRQ_TYPE_NONE); } EXPORT_SYMBOL(soc_pcmcia_disable_irqs); @@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt, for (i = 0; i < nr; i++) if (irqs[i].sock == skt->nr) { - set_irq_type(irqs[i].irq, IRQT_RISING); - set_irq_type(irqs[i].irq, IRQT_BOTHEDGE); + set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING); + set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH); } } EXPORT_SYMBOL(soc_pcmcia_enable_irqs); diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c index 51e26c1..32dd851 100644 --- a/drivers/video/am200epd.c +++ b/drivers/video/am200epd.c @@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info) return retval; } - return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING); + return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING); } static void am200_set_rst(struct metronomefb_par *par, int state) diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index 81dbcf5..fafd0f2 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev) sossi_write_reg(SOSSI_INIT1_REG, l); if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq, - IRQT_FALLING, + IRQ_TYPE_EDGE_FALLING, "sossi_match", sossi.fbdev->dev)) < 0) { dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n"); goto err; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 2b707a8..69de2fe 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1336,7 +1336,7 @@ static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi) fbi->dma_buff_phys = fbi->map_dma; fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; - pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16)); + pr_debug("pxafb: palette_mem_size = 0x%08x\n", fbi->palette_size*sizeof(u16)); #ifdef CONFIG_FB_PXA_SMARTPANEL fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h index 13ec7ed..a25d18f 100644 --- a/include/asm-arm/arch-pnx4008/irqs.h +++ b/include/asm-arm/arch-pnx4008/irqs.h @@ -135,30 +135,30 @@ #define PNX4008_IRQ_TYPES \ { /*IRQ #'s: */ \ -IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \ -IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \ -IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \ -IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \ -IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ +IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ +IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ } /* Start Enable Pin Interrupts - table 58 page 66 */ diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h index b695253..21aa8ac 100644 --- a/include/asm-arm/arch-pxa/idp.h +++ b/include/asm-arm/arch-pxa/idp.h @@ -138,18 +138,18 @@ #define TOUCH_PANEL_IRQ IRQ_GPIO(5) #define IDE_IRQ IRQ_GPIO(21) -#define TOUCH_PANEL_IRQ_EDGE IRQT_FALLING +#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define ETHERNET_IRQ IRQ_GPIO(4) -#define ETHERNET_IRQ_EDGE IRQT_RISING +#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define IDE_IRQ_EDGE IRQT_RISING +#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCMCIA_S0_CD_VALID IRQ_GPIO(7) -#define PCMCIA_S0_CD_VALID_EDGE IRQT_BOTHEDGE +#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH #define PCMCIA_S1_CD_VALID IRQ_GPIO(8) -#define PCMCIA_S1_CD_VALID_EDGE IRQT_BOTHEDGE +#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH #define PCMCIA_S0_RDYINT IRQ_GPIO(19) #define PCMCIA_S1_RDYINT IRQ_GPIO(22) diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h index b699d0d..2e20131 100644 --- a/include/asm-arm/arch-pxa/pcm990_baseboard.h +++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h @@ -29,14 +29,14 @@ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ #define PCM990_CTRL_INT_IRQ_GPIO 9 #define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) -#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 #define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) -#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* visible CPLD (U7) registers */ #define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ @@ -133,7 +133,7 @@ */ #define PCM990_IDE_IRQ_GPIO 13 #define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) -#define PCM990_IDE_IRQ_EDGE IRQT_RISING +#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_BASE 0xee000000 #define PCM990_IDE_PLD_SIZE (1*1024*1024) @@ -189,11 +189,11 @@ */ #define PCM990_CF_IRQ_GPIO 11 #define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) -#define PCM990_CF_IRQ_EDGE IRQT_RISING +#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_CD_GPIO 12 #define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) -#define PCM990_CF_CD_EDGE IRQT_RISING +#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ #define PCM990_CF_PLD_BASE 0xef000000 @@ -259,14 +259,14 @@ */ #define PCM990_AC97_IRQ_GPIO 10 #define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) -#define PCM990_AC97_IRQ_EDGE IRQT_RISING +#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* * MMC phyCORE */ #define PCM990_MMC0_IRQ_GPIO 9 #define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) -#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING +#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING /* * USB phyCore diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h index 8403059..1b80a48 100644 --- a/include/asm-arm/arch-pxa/pxa25x-udc.h +++ b/include/asm-arm/arch-pxa/pxa25x-udc.h @@ -2,7 +2,7 @@ #define _ASM_ARCH_PXA25X_UDC_H #ifdef _ASM_ARCH_PXA27X_UDC_H -#error You can't include both PXA25x and PXA27x UDC support +#error "You can't include both PXA25x and PXA27x UDC support" #endif #define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h index b14cbda..193f6c1 100644 --- a/include/asm-arm/arch-sa1100/ide.h +++ b/include/asm-arm/arch-sa1100/ide.h @@ -61,7 +61,7 @@ ide_init_default_hwifs(void) /* Enable GPIO as interrupt line */ GPDR &= ~LART_GPIO_IDE; - set_irq_type(LART_IRQ_IDE, IRQT_RISING); + set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING); /* set PCMCIA interface timing */ MECR = 0x00060006; diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index 5c60bfc..9a1db20 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -277,9 +277,16 @@ static inline int constant_fls(int x) * the clz instruction for much better code efficiency. */ -#define fls(x) \ +#define __fls(x) \ ( __builtin_constant_p(x) ? constant_fls(x) : \ ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) + +/* Implement fls() in C so that 64-bit args are suitably truncated */ +static inline int fls(int x) +{ + return __fls(x); +} + #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) #define __ffs(x) (ffs(x) - 1) #define ffz(x) __ffs( ~(x) ) diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 03cf1ee..e68a1cb 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -459,15 +459,19 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, #define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0) #if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT) - +/* + * VIVT caches only + */ #define cache_is_vivt() 1 #define cache_is_vipt() 0 #define cache_is_vipt_nonaliasing() 0 #define cache_is_vipt_aliasing() 0 #define icache_is_vivt_asid_tagged() 0 -#elif defined(CONFIG_CPU_CACHE_VIPT) - +#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT) +/* + * VIPT caches only + */ #define cache_is_vivt() 0 #define cache_is_vipt() 1 #define cache_is_vipt_nonaliasing() \ @@ -489,7 +493,12 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt, }) #else - +/* + * VIVT or VIPT caches. Note that this is unreliable since ARM926 + * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test. + * There's no way to tell from the CacheType register what type (!) + * the cache is. + */ #define cache_is_vivt() \ ({ \ unsigned int __val = read_cpuid(CPUID_CACHETYPE); \ diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h index 1b882a2..9cb0190 100644 --- a/include/asm-arm/irq.h +++ b/include/asm-arm/irq.h @@ -19,23 +19,6 @@ #define NO_IRQ ((unsigned int)(-1)) #endif - -/* - * Migration helpers - */ -#define __IRQT_FALEDGE IRQ_TYPE_EDGE_FALLING -#define __IRQT_RISEDGE IRQ_TYPE_EDGE_RISING -#define __IRQT_LOWLVL IRQ_TYPE_LEVEL_LOW -#define __IRQT_HIGHLVL IRQ_TYPE_LEVEL_HIGH - -#define IRQT_NOEDGE (0) -#define IRQT_RISING (__IRQT_RISEDGE) -#define IRQT_FALLING (__IRQT_FALEDGE) -#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) -#define IRQT_LOW (__IRQT_LOWLVL) -#define IRQT_HIGH (__IRQT_HIGHLVL) -#define IRQT_PROBE IRQ_TYPE_PROBE - #ifndef __ASSEMBLY__ struct irqaction; extern void migrate_irqs(void); diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h index 75feb15..2d84792 100644 --- a/include/asm-arm/pci.h +++ b/include/asm-arm/pci.h @@ -78,6 +78,14 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res) return root; } +/* + * Dummy implementation; always return 0. + */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return 0; +} + #endif /* __KERNEL__ */ #endif |