summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c3
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c15
-rw-r--r--drivers/net/ethernet/intel/e1000e/lib.c20
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c3
4 files changed, 15 insertions, 26 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index b3a235c..f323ce5 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -667,8 +667,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
udelay(1);
if (hw->phy.autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link "
- "on GG82563 phy.\n");
+ e_dbg("Waiting for forced speed/duplex link on GG82563 phy.\n");
ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 6a6e6f6..53e5447 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -902,8 +902,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
}
if (!timeout) {
- e_dbg("Failed to acquire the semaphore, FW or HW has it: "
- "FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
+ e_dbg("Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\n",
er32(FWSM), extcnf_ctrl);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
@@ -2132,8 +2131,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
return 0;
}
- e_dbg("Unable to determine valid NVM bank via EEC - "
- "reading flash signature\n");
+ e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
/* fall-thru */
default:
/* set bank to 0 in case flash read fails */
@@ -2245,8 +2243,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
/* Check if the flash descriptor is valid */
if (hsfsts.hsf_status.fldesvalid == 0) {
- e_dbg("Flash descriptor invalid. "
- "SW Sequencing must be used.\n");
+ e_dbg("Flash descriptor invalid. SW Sequencing must be used.\n");
return -E1000_ERR_NVM;
}
@@ -2446,8 +2443,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
/* Repeat for some time before giving up. */
continue;
} else if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.\n");
+ e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
}
@@ -2798,8 +2794,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
/* Repeat for some time before giving up. */
continue;
if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.");
+ e_dbg("Timeout error - flash cycle did not complete.\n");
break;
}
} while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
diff --git a/drivers/net/ethernet/intel/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/lib.c
index 78e3f4c..e2678bd 100644
--- a/drivers/net/ethernet/intel/e1000e/lib.c
+++ b/drivers/net/ethernet/intel/e1000e/lib.c
@@ -653,12 +653,10 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
mac->serdes_has_link = true;
- e_dbg("SERDES: Link up - autoneg "
- "completed successfully.\n");
+ e_dbg("SERDES: Link up - autoneg completed successfully.\n");
} else {
mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - invalid"
- "codewords detected in autoneg.\n");
+ e_dbg("SERDES: Link down - invalid codewords detected in autoneg.\n");
}
} else {
mac->serdes_has_link = false;
@@ -1118,8 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
return ret_val;
if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
- e_dbg("Copper PHY and Auto Neg "
- "has not completed.\n");
+ e_dbg("Copper PHY and Auto Neg has not completed.\n");
return ret_val;
}
@@ -1183,11 +1180,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
*/
if (hw->fc.requested_mode == e1000_fc_full) {
hw->fc.current_mode = e1000_fc_full;
- e_dbg("Flow Control = FULL.\r\n");
+ e_dbg("Flow Control = FULL.\n");
} else {
hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = "
- "Rx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Rx PAUSE frames only.\n");
}
}
/*
@@ -1203,7 +1199,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc.current_mode = e1000_fc_tx_pause;
- e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Tx PAUSE frames only.\n");
}
/*
* For transmitting PAUSE frames ONLY.
@@ -1218,14 +1214,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
+ e_dbg("Flow Control = Rx PAUSE frames only.\n");
} else {
/*
* Per the IEEE spec, at this point flow control
* should be disabled.
*/
hw->fc.current_mode = e1000_fc_none;
- e_dbg("Flow Control = NONE.\r\n");
+ e_dbg("Flow Control = NONE.\n");
}
/*
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 8666476..ed70d08 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1136,8 +1136,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (phy->autoneg_wait_to_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
- e_dbg("Error while waiting for "
- "autoneg to complete\n");
+ e_dbg("Error while waiting for autoneg to complete\n");
return ret_val;
}
}
generated by cgit v0.10.2 at 2024-11-04 05:20:08 (GMT)