diff options
-rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/86xx/Kconfig | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 87 | ||||
-rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/fsl_uli1575.c | 115 |
5 files changed, 108 insertions, 99 deletions
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 25f41cd..00c5358 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void) #ifdef CONFIG_PCI static int primary_phb_addr; -extern int uses_fsl_uli_m1575; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); @@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void) } } - uses_fsl_uli_m1575 = 1; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 8ce10b2..9355a52 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -27,6 +27,7 @@ config SBC8641D config MPC8610_HPCD bool "Freescale MPC8610 HPCD" select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8610 HPCD board. diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 3072530..5eedb71 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void) } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); -#ifdef CONFIG_PCI -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - u32 temp32; - - /* Disable INTx */ - pci_read_config_dword(dev, 0x48, &temp32); - pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); - - /* Enable sideband interrupt */ - pci_read_config_dword(dev, 0x90, &temp32); - pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) -{ - unsigned char c; - unsigned short temp; - - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); - pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); - - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); -} - -/* - * Since 8259PIC was disabled on the board, the IDE device can not - * use the legacy IRQ, we need to let the IDE device work under - * native mode and use the interrupt line like other PCI devices. - * IRQ14 is a sideband interrupt from IDE device to CPU and we use this - * as the interrupt for IDE device. - */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned char c; - - pci_read_config_byte(dev, 0x4b, &c); - c |= 0x10; - pci_write_config_byte(dev, 0x4b, c); -} - -/* - * SATA interrupt pin bug fix - * There's a chip bug for 5288, The interrupt pin should be 2, - * not the read only value 1, So it use INTB#, not INTA# which - * actually used by the IDE device 5229. - * As of this bug, during the PCI initialization, 5288 read the - * irq of IDE device from the device tree, this function fix this - * bug by re-assigning a correct irq to 5288. - * - */ -static void __devinit final_uli5288(struct pci_dev *dev) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - struct device_node *hosenode = hose ? hose->dn : NULL; - struct of_irq oirq; - int virq, pin = 2; - u32 laddr[3]; - - if (!hosenode) - return; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - dev->irq = virq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); -#endif /* CONFIG_PCI */ - #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) static u32 get_busfreq(void) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 7916599..f712d9c 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -45,7 +45,6 @@ #endif #ifdef CONFIG_PCI -extern int uses_fsl_uli_m1575; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); @@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void) fsl_add_bridge(np, 0); } - uses_fsl_uli_m1575 = 1; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index 756561c..ef74a07 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = { ULI_8259_NONE, /* PIRQH */ }; -/* set in board code if you want this quirks to do something */ -int uses_fsl_uli_m1575; - /* Bridge */ static void __devinit early_uli5249(struct pci_dev *dev) { unsigned char temp; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO | @@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev) { int i; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; /* @@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev) * IRQ 14: Edge * IRQ 15: Edge */ - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; outb(0xfa, 0x4d0); @@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev) unsigned char c; unsigned int d; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; /* read/write lock */ @@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev) { unsigned short temp; - if (!uses_fsl_uli_m1575) + if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) && + !machine_is(mpc8572_ds)) return; pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE | @@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575); +static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev) +{ + u32 temp32; + + if (!machine_is(mpc86xx_hpcd)) + return; + + /* Disable INTx */ + pci_read_config_dword(dev, 0x48, &temp32); + pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); + + /* Enable sideband interrupt */ + pci_read_config_dword(dev, 0x90, &temp32); + pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); +} + +static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + unsigned short temp; + + if (!machine_is(mpc86xx_hpcd)) + return; + + /* Interrupt Disable, Needed when SATA disabled */ + pci_read_config_word(dev, PCI_COMMAND, &temp); + temp |= 1<<10; + pci_write_config_word(dev, PCI_COMMAND, temp); + + pci_read_config_byte(dev, 0x83, &c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); + pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); + + pci_read_config_byte(dev, 0x83, &c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); +} + +/* + * Since 8259PIC was disabled on the board, the IDE device can not + * use the legacy IRQ, we need to let the IDE device work under + * native mode and use the interrupt line like other PCI devices. + * IRQ14 is a sideband interrupt from IDE device to CPU and we use this + * as the interrupt for IDE device. + */ +static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev) +{ + unsigned char c; + + if (!machine_is(mpc86xx_hpcd)) + return; + + pci_read_config_byte(dev, 0x4b, &c); + c |= 0x10; + pci_write_config_byte(dev, 0x4b, c); +} + +/* + * SATA interrupt pin bug fix + * There's a chip bug for 5288, The interrupt pin should be 2, + * not the read only value 1, So it use INTB#, not INTA# which + * actually used by the IDE device 5229. + * As of this bug, during the PCI initialization, 5288 read the + * irq of IDE device from the device tree, this function fix this + * bug by re-assigning a correct irq to 5288. + * + */ +static void __devinit hpcd_final_uli5288(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + struct device_node *hosenode = hose ? hose->dn : NULL; + struct of_irq oirq; + int virq, pin = 2; + u32 laddr[3]; + + if (!machine_is(mpc86xx_hpcd)) + return; + + if (!hosenode) + return; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + dev->irq = virq; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288); + int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { |