diff options
-rw-r--r-- | Documentation/devicetree/bindings/usb/usb-phy.txt | 17 | ||||
-rw-r--r-- | drivers/usb/phy/Kconfig | 9 | ||||
-rw-r--r-- | drivers/usb/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/phy/omap-usb2.c | 271 | ||||
-rw-r--r-- | include/linux/usb/omap_usb.h | 46 | ||||
-rw-r--r-- | include/linux/usb/phy_companion.h | 34 |
6 files changed, 378 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt new file mode 100644 index 0000000..80d4148 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -0,0 +1,17 @@ +USB PHY + +OMAP USB2 PHY + +Required properties: + - compatible: Should be "ti,omap-usb2" + - reg : Address and length of the register set for the device. Also +add the address of control module dev conf register until a driver for +control module is added + +This is usually a subnode of ocp2scp to which it is connected. + +usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>, + <0x4a002300 0x4>; +}; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2838adb..63c339b 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,6 +4,15 @@ comment "USB Physical Layer drivers" depends on USB || USB_GADGET +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + select USB_OTG_UTILS + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index bb948fb..b069f29 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -4,6 +4,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG +obj-$(CONFIG_OMAP_USB2) += omap-usb2.o obj-$(CONFIG_USB_ISP1301) += isp1301.o obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c new file mode 100644 index 0000000..15ab3d6 --- /dev/null +++ b/drivers/usb/phy/omap-usb2.c @@ -0,0 +1,271 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/usb/omap_usb.h> +#include <linux/usb/phy_companion.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +/** + * omap_usb_phy_power - power on/off the phy using control module reg + * @phy: struct omap_usb * + * @on: 0 or 1, based on powering on or off the PHY + * + * XXX: Remove this function once control module driver gets merged + */ +static void omap_usb_phy_power(struct omap_usb *phy, int on) +{ + u32 val; + + if (on) { + val = readl(phy->control_dev); + if (val & PHY_PD) { + writel(~PHY_PD, phy->control_dev); + /* XXX: add proper documentation for this delay */ + mdelay(200); + } + } else { + writel(PHY_PD, phy->control_dev); + } +} + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + + otg->host = host; + if (!host) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct usb_phy *phy = otg->phy; + + otg->gadget = gadget; + if (!gadget) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb2_suspend(struct usb_phy *x, int suspend) +{ + u32 ret; + struct omap_usb *phy = phy_to_omapusb(x); + + if (suspend && !phy->is_suspended) { + omap_usb_phy_power(phy, 0); + pm_runtime_put_sync(phy->dev); + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", + ret); + return ret; + } + omap_usb_phy_power(phy, 1); + phy->is_suspended = 0; + } + + return 0; +} + +static int __devinit omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct usb_otg *otg; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb2"; + phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.otg = otg; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); + if (phy->control_dev == NULL) { + dev_err(&pdev->dev, "Failed to obtain io memory\n"); + return -ENXIO; + } + + phy->is_suspended = 1; + omap_usb_phy_power(phy, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + otg->set_vbus = omap_usb_set_vbus; + otg->start_srp = omap_usb_start_srp; + otg->phy = &phy->phy; + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + usb_add_phy(&phy->phy, USB_PHY_TYPE_USB2); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + + return 0; +} + +static int __devexit omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->wkupclk); + if (ret < 0) + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb2_id_table[] = { + { .compatible = "ti,omap-usb2" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = __devexit_p(omap_usb2_remove), + .driver = { + .name = "omap-usb2", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb2_id_table), + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform: omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h new file mode 100644 index 0000000..0ea17f8 --- /dev/null +++ b/include/linux/usb/omap_usb.h @@ -0,0 +1,46 @@ +/* + * omap_usb.h -- omap usb2 phy header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_USB2_H +#define __DRIVERS_OMAP_USB2_H + +#include <linux/usb/otg.h> + +struct omap_usb { + struct usb_phy phy; + struct phy_companion *comparator; + struct device *dev; + u32 __iomem *control_dev; + struct clk *wkupclk; + u8 is_suspended:1; +}; + +#define PHY_PD 0x1 + +#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) + +#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) +extern int omap_usb2_set_comparator(struct phy_companion *comparator); +#else +static inline int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + return -ENODEV; +} +#endif + +#endif /* __DRIVERS_OMAP_USB_H */ diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h new file mode 100644 index 0000000..edd2ec2 --- /dev/null +++ b/include/linux/usb/phy_companion.h @@ -0,0 +1,34 @@ +/* + * phy-companion.h -- phy companion to indicate the comparator part of PHY + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_PHY_COMPANION_H +#define __DRIVERS_PHY_COMPANION_H + +#include <linux/usb/otg.h> + +/* phy_companion to take care of VBUS, ID and srp capabilities */ +struct phy_companion { + + /* effective for A-peripheral, ignored for B devices */ + int (*set_vbus)(struct phy_companion *x, bool enabled); + + /* for B devices only: start session with A-Host */ + int (*start_srp)(struct phy_companion *x); +}; + +#endif /* __DRIVERS_PHY_COMPANION_H */ |