summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/gpio.txt12
-rw-r--r--arch/arm/Kconfig8
-rw-r--r--arch/avr32/Kconfig2
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/platforms/52xx/Kconfig2
-rw-r--r--arch/powerpc/sysdev/qe_lib/Kconfig2
-rw-r--r--arch/x86/Kconfig1
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/gpio/Kconfig33
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/i2c/chips/Kconfig2
-rw-r--r--drivers/mfd/Kconfig4
-rw-r--r--drivers/of/Kconfig2
-rw-r--r--include/asm-generic/gpio.h2
-rw-r--r--include/asm-mips/mach-generic/gpio.h2
-rw-r--r--include/asm-powerpc/gpio.h4
-rw-r--r--include/asm-x86/gpio.h56
18 files changed, 116 insertions, 23 deletions
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 8b69811..18022e2 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -389,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
Platform Support
----------------
-To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
+To support this framework, a platform's Kconfig will "select" either
+ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
They may also want to provide a custom value for ARCH_NR_GPIOS.
+ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+into the kernel on that architecture.
+
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+can enable it and build it into the kernel optionally.
+
+If neither of these options are selected, the platform does not support
+GPIOs through GPIO-lib and the code cannot be enabled by the user.
+
Trivial implementations of those functions can directly use framework
code, which always dispatches through the gpio_chip:
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6fb4f03..dabb015 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -268,7 +268,7 @@ config ARCH_EP93XX
select GENERIC_GPIO
select HAVE_CLK
select HAVE_CLK
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -447,7 +447,7 @@ config ARCH_PXA
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@@ -479,7 +479,7 @@ config ARCH_SA1100
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Support for StrongARM 11x0 based boards.
@@ -522,7 +522,7 @@ config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index df4adef..7c239a9 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -88,7 +88,7 @@ config PLATFORM_AT32AP
select SUBARCH_AVR32B
select MMU
select PERFORMANCE_COUNTERS
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_ALLOCATOR
#
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b9c754f..b4c4eaa 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -713,7 +713,7 @@ config CSRC_SB1250
config GPIO_TXX9
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
bool
config CFE
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de6b49c..fe88418 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,6 +110,7 @@ config PPC
default y
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index d664b1b..ccbd495 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -48,6 +48,6 @@ config PPC_MPC5200_BUGFIX
config PPC_MPC5200_GPIO
bool "MPC5200 GPIO support"
depends on PPC_MPC52xx
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f5..1ce5464 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
bool "QE GPIO support"
depends on QUICC_ENGINE
select GENERIC_GPIO
- select HAVE_GPIO_LIB
+ select ARCH_REQUIRE_GPIOLIB
help
Say Y here if you're going to use hardware that connects to the
QE GPIOs.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 66f3ab0..e3cba0b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@ config X86
select HAVE_OPROFILE
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
+ select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
select HAVE_KRETPROBES
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE
diff --git a/drivers/Makefile b/drivers/Makefile
index 808e0ae..54ec5e7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
# Rewritten to use lists instead of if-statements.
#
-obj-$(CONFIG_HAVE_GPIO_LIB) += gpio/
+obj-y += gpio/
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index de202db..5a355f8 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,15 +2,40 @@
# GPIO infrastructure and expanders
#
-config HAVE_GPIO_LIB
+config ARCH_WANT_OPTIONAL_GPIOLIB
bool
help
+ Select this config option from the architecture Kconfig, if
+ it is possible to use gpiolib on the architecture, but let the
+ user decide whether to actually build it or not.
+ Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
+ not depend on GPIOs being available, but rather let the user
+ decide whether he needs it or not.
+
+config ARCH_REQUIRE_GPIOLIB
+ bool
+ select GPIOLIB
+ help
Platforms select gpiolib if they use this infrastructure
for all their GPIOs, usually starting with ones integrated
into SOC processors.
+ Selecting this from the architecture code will cause the gpiolib
+ code to always get built in.
+
+
+
+menuconfig GPIOLIB
+ bool "GPIO Support"
+ depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ help
+ This enables GPIO support through the generic GPIO library.
+ You only need to enable this, if you also want to enable
+ one or more of the GPIO expansion card drivers below.
+
+ If unsure, say N.
-menu "GPIO Support"
- depends on HAVE_GPIO_LIB
+if GPIOLIB
config DEBUG_GPIO
bool "Debug GPIO calls"
@@ -116,4 +141,4 @@ config GPIO_MCP23S08
SPI driver for Microchip MCP23S08 I/O expander. This provides
a GPIO interface supporting inputs and outputs.
-endmenu
+endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index eeb2f2b..8c45948 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,7 +2,7 @@
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
-obj-$(CONFIG_HAVE_GPIO_LIB) += gpiolib.o
+obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a46..a95cb94 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
config TPS65010
tristate "TPS6501x Power Management chips"
- depends on HAVE_GPIO_LIB
+ depends on GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bac9e97..1f57a99 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -36,7 +36,7 @@ config MFD_ASIC3
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
@@ -52,7 +52,7 @@ config HTC_PASIC3
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
- depends on HAVE_GPIO_LIB
+ depends on GPIOLIB
select MFD_CORE
help
Support for Toshiba Mobile IO Controller TC6393XB
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3a7a11a..1d7ec31 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OF_DEVICE
config OF_GPIO
def_bool y
- depends on OF && PPC_OF && HAVE_GPIO_LIB
+ depends on OF && PPC_OF && GPIOLIB
help
OpenFirmware GPIO accessors
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 1beff51..a3034d2 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
#include <linux/compiler.h>
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
index e6b376b..b4e7020 100644
--- a/include/asm-mips/mach-generic/gpio.h
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -1,7 +1,7 @@
#ifndef __ASM_MACH_GENERIC_GPIO_H
#define __ASM_MACH_GENERIC_GPIO_H
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
index 77ad3a8..ea04632 100644
--- a/include/asm-powerpc/gpio.h
+++ b/include/asm-powerpc/gpio.h
@@ -17,7 +17,7 @@
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
/*
* We don't (yet) implement inlined/rapid versions for on-chip gpios.
@@ -51,6 +51,6 @@ static inline int irq_to_gpio(unsigned int irq)
return -EINVAL;
}
-#endif /* CONFIG_HAVE_GPIO_LIB */
+#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index ff87fca..116e914 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -1,6 +1,62 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
#ifndef _ASM_I386_GPIO_H
#define _ASM_I386_GPIO_H
+#ifdef CONFIG_X86_RDC321X
#include <gpio.h>
+#else /* CONFIG_X86_RDC321X */
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* CONFIG_X86_RDC321X */
#endif /* _ASM_I386_GPIO_H */