diff options
-rw-r--r-- | drivers/input/keyboard/Kconfig | 10 | ||||
-rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/stmpe-keypad.c | 386 |
3 files changed, 397 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b171f63..9cc488d 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -395,6 +395,16 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. +config KEYBOARD_STMPE + tristate "STMPE keypad support" + depends on MFD_STMPE + help + Say Y here if you want to use the keypad controller on STMPE I/O + expanders. + + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 1a66d5f..504b591 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c new file mode 100644 index 0000000..ab7610c --- /dev/null +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -0,0 +1,386 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/stmpe.h> + +/* These are at the same addresses in all STMPE variants */ +#define STMPE_KPC_COL 0x60 +#define STMPE_KPC_ROW_MSB 0x61 +#define STMPE_KPC_ROW_LSB 0x62 +#define STMPE_KPC_CTRL_MSB 0x63 +#define STMPE_KPC_CTRL_LSB 0x64 +#define STMPE_KPC_COMBI_KEY_0 0x65 +#define STMPE_KPC_COMBI_KEY_1 0x66 +#define STMPE_KPC_COMBI_KEY_2 0x67 +#define STMPE_KPC_DATA_BYTE0 0x68 +#define STMPE_KPC_DATA_BYTE1 0x69 +#define STMPE_KPC_DATA_BYTE2 0x6a +#define STMPE_KPC_DATA_BYTE3 0x6b +#define STMPE_KPC_DATA_BYTE4 0x6c + +#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0) +#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1) +#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4) + +#define STMPE_KPC_ROW_MSB_ROWS 0xff + +#define STMPE_KPC_DATA_UP (0x1 << 7) +#define STMPE_KPC_DATA_ROW (0xf << 3) +#define STMPE_KPC_DATA_COL (0x7 << 0) +#define STMPE_KPC_DATA_NOKEY_MASK 0x78 + +#define STMPE_KEYPAD_MAX_DEBOUNCE 127 +#define STMPE_KEYPAD_MAX_SCAN_COUNT 15 + +#define STMPE_KEYPAD_MAX_ROWS 8 +#define STMPE_KEYPAD_MAX_COLS 8 +#define STMPE_KEYPAD_ROW_SHIFT 3 +#define STMPE_KEYPAD_KEYMAP_SIZE \ + (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) + +/** + * struct stmpe_keypad_variant - model-specific attributes + * @auto_increment: whether the KPC_DATA_BYTE register address + * auto-increments on multiple read + * @num_data: number of data bytes + * @num_normal_data: number of normal keys' data bytes + * @max_cols: maximum number of columns supported + * @max_rows: maximum number of rows supported + * @col_gpios: bitmask of gpios which can be used for columns + * @row_gpios: bitmask of gpios which can be used for rows + */ +struct stmpe_keypad_variant { + bool auto_increment; + int num_data; + int num_normal_data; + int max_cols; + int max_rows; + unsigned int col_gpios; + unsigned int row_gpios; +}; + +static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { + [STMPE1601] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 8, + .col_gpios = 0x000ff, /* GPIO 0 - 7 */ + .row_gpios = 0x0ff00, /* GPIO 8 - 15 */ + }, + [STMPE2401] = { + .auto_increment = false, + .num_data = 3, + .num_normal_data = 2, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, + [STMPE2403] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, +}; + +struct stmpe_keypad { + struct stmpe *stmpe; + struct input_dev *input; + const struct stmpe_keypad_variant *variant; + const struct stmpe_keypad_platform_data *plat; + + unsigned int rows; + unsigned int cols; + + unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE]; +}; + +static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + int i; + + if (variant->auto_increment) + return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0, + variant->num_data, data); + + for (i = 0; i < variant->num_data; i++) { + ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i); + if (ret < 0) + return ret; + + data[i] = ret; + } + + return 0; +} + +static irqreturn_t stmpe_keypad_irq(int irq, void *dev) +{ + struct stmpe_keypad *keypad = dev; + struct input_dev *input = keypad->input; + const struct stmpe_keypad_variant *variant = keypad->variant; + u8 fifo[variant->num_data]; + int ret; + int i; + + ret = stmpe_keypad_read_data(keypad, fifo); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < variant->num_normal_data; i++) { + u8 data = fifo[i]; + int row = (data & STMPE_KPC_DATA_ROW) >> 3; + int col = data & STMPE_KPC_DATA_COL; + int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT); + bool up = data & STMPE_KPC_DATA_UP; + + if ((data & STMPE_KPC_DATA_NOKEY_MASK) + == STMPE_KPC_DATA_NOKEY_MASK) + continue; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], !up); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + unsigned int col_gpios = variant->col_gpios; + unsigned int row_gpios = variant->row_gpios; + struct stmpe *stmpe = keypad->stmpe; + unsigned int pins = 0; + int i; + + /* + * Figure out which pins need to be set to the keypad alternate + * function. + * + * {cols,rows}_gpios are bitmasks of which pins on the chip can be used + * for the keypad. + * + * keypad->{cols,rows} are a bitmask of which pins (of the ones useable + * for the keypad) are used on the board. + */ + + for (i = 0; i < variant->max_cols; i++) { + int num = __ffs(col_gpios); + + if (keypad->cols & (1 << i)) + pins |= 1 << num; + + col_gpios &= ~(1 << num); + } + + for (i = 0; i < variant->max_rows; i++) { + int num = __ffs(row_gpios); + + if (keypad->rows & (1 << i)) + pins |= 1 << num; + + row_gpios &= ~(1 << num); + } + + return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); +} + +static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_platform_data *plat = keypad->plat; + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + + if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) + return -EINVAL; + + if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) + return -EINVAL; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD); + if (ret < 0) + return ret; + + ret = stmpe_keypad_altfunc_init(keypad); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows); + if (ret < 0) + return ret; + + if (variant->max_rows > 8) { + ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB, + STMPE_KPC_ROW_MSB_ROWS, + keypad->rows >> 8); + if (ret < 0) + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB, + STMPE_KPC_CTRL_MSB_SCAN_COUNT, + plat->scan_count << 4); + if (ret < 0) + return ret; + + return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB, + STMPE_KPC_CTRL_LSB_SCAN | + STMPE_KPC_CTRL_LSB_DEBOUNCE, + STMPE_KPC_CTRL_LSB_SCAN | + (plat->debounce_ms << 1)); +} + +static int __devinit stmpe_keypad_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_keypad_platform_data *plat; + struct stmpe_keypad *keypad; + struct input_dev *input; + int ret; + int irq; + int i; + + plat = stmpe->pdata->keypad; + if (!plat) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + input = input_allocate_device(); + if (!input) { + ret = -ENOMEM; + goto out_freekeypad; + } + + input->name = "STMPE keypad"; + input->id.bustype = BUS_I2C; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + __set_bit(EV_KEY, input->evbit); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + input->keycode = keypad->keymap; + input->keycodesize = sizeof(keypad->keymap[0]); + input->keycodemax = ARRAY_SIZE(keypad->keymap); + + matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT, + input->keycode, input->keybit); + + for (i = 0; i < plat->keymap_data->keymap_size; i++) { + unsigned int key = plat->keymap_data->keymap[i]; + + keypad->cols |= 1 << KEY_COL(key); + keypad->rows |= 1 << KEY_ROW(key); + } + + keypad->stmpe = stmpe; + keypad->plat = plat; + keypad->input = input; + keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; + + ret = stmpe_keypad_chip_init(keypad); + if (ret < 0) + goto out_freeinput; + + ret = input_register_device(input); + if (ret) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", ret); + goto out_freeinput; + } + + ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT, + "stmpe-keypad", keypad); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_unregisterinput; + } + + platform_set_drvdata(pdev, keypad); + + return 0; + +out_unregisterinput: + input_unregister_device(input); + input = NULL; +out_freeinput: + input_free_device(input); +out_freekeypad: + kfree(keypad); + return ret; +} + +static int __devexit stmpe_keypad_remove(struct platform_device *pdev) +{ + struct stmpe_keypad *keypad = platform_get_drvdata(pdev); + struct stmpe *stmpe = keypad->stmpe; + int irq = platform_get_irq(pdev, 0); + + stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD); + + free_irq(irq, keypad); + input_unregister_device(keypad->input); + platform_set_drvdata(pdev, NULL); + kfree(keypad); + + return 0; +} + +static struct platform_driver stmpe_keypad_driver = { + .driver.name = "stmpe-keypad", + .driver.owner = THIS_MODULE, + .probe = stmpe_keypad_probe, + .remove = __devexit_p(stmpe_keypad_remove), +}; + +static int __init stmpe_keypad_init(void) +{ + return platform_driver_register(&stmpe_keypad_driver); +} +module_init(stmpe_keypad_init); + +static void __exit stmpe_keypad_exit(void) +{ + platform_driver_unregister(&stmpe_keypad_driver); +} +module_exit(stmpe_keypad_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPExxxx keypad driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); |